Providing Annual Internal Electrification maintenance work in all the buildings Super Specialty Old Building Jayanti Medicine Building NTH-I and NTH-II Building Blood Bank Mortuary Block and other work stations of the hospital of AGMC and GBP Hospita

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:-

Short Point :-

Medium Point :-

Long Point :-

Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required.

2 X 1.5 sq mm

2 X 2.5 sq mm

2 X 4 sq mm

2 X 6 sq mm

4 X 4 sq mm

4 X 6 sq mm

4 X 10 sq mm

4 X 16 sq mm

4 X 25 sq mm

4 X 35 sq mm

Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:-

1 X 1.5 sq mm

1 X 2.5 sq mm

1 X 4 sq mm

1 X 6 sq mm

1 X 10 sq mm

1 X 16 sq mm

Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.

19/20 mm dia

25 mm dia

32 mm dia

Supplying and fixing of the following PVC conduit (medium gauge) with all accessories on slab/recessed on wall etc as required.

19/20 mm dia

25 mm dia

32 mm dia

Supplying and fixing of the following electrical accessories including necessary connection etc. as required.

5/6 amps piano type switch

5/6 amps piano type 2-way switch

3 pin 5/6 amps piano type socket

3/6 pin 16/20 amps piano type socket

Electronic 4 step mini fan regulator

Pandent holder

Angle/batten holder

Ceiling rose

Ding dong call bell

Musical call bell

2.5 mfd fan capacitor

Side holder for pin type CFL

3mm thick bakelite sheet

5 amps power top:-

15 amps power top:-

32 amps DP kit kat switch:-

Supplying and fixing of the following sizes PVC switch boards with cover etc. as required.

75mm x 75mm (3" X 3") :-

102mm x 102mm (4" X 4")

102mm x 178mm (4" X 7") :-

152mm x 203mm (6" X 8") :-

203mm x 254mm (8" X 10") :-

Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required.

1-2 module plastic switch board:-

3 module plastic switch board:-

4 module plastic switch board:-

6 module plastic switch board:-

8 module plastic switch board:-

12 module plastic switch board:-

Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required.

1-2 module :-

3 module :-

4 module :-

6 module :-

8 module :-

12 module :-

16 module :-

18 module :-

Supplying and fixing of the following modular accessories including necessary connection etc. as required.

6/10 amps one way SP switch (1M) :-

6/10 amps two way SP switch (1M) :-

16/20 amps one way SP switch (1M) :-

Bell push SP (1M) :-

3 pin 6/10 amps socket outlet (2M):-

3/6 pin 16/20 amps socket outlet (2M):-

4 step fan regulator (1M):-

Blank plate (1M):-

Louvers/opaque type LED foot lamp (4M):-

20/25 amps single phase motor starter switch (2M):-

Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.

Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals.

Supply and fixing of 32mm x 6 mm GI strip on walls/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals.

Supply and fixing of 25mm x 3mm Copper on walls/ floor of the building for horizontal/ vertical network including necessary spacers and porcelain insulators at regular intervals.

Supply and fixing of 32mm x 6 mm Copper strip on walls/ floor of the building for hoizontal/ vertical network including necessary spacers and porcelain insulators at regular intervals.

Providing earthing system with maintenance free earthing electrode of 50 mm dia & 3 mtr long of dual electrode technology filled with highly conductive compound and back fill compound of 2 nos. 25 kg bag, terminal size 32mmx 6mm including accessories with masonry enclosure of CI cover plate size 12"x 12" having locking arrangement including CC works etc as required:-

Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W) : -

Supplying & installation of 400 mm sweep AC padestal fan with metal blade including connection etc as required:-

Supplying & installation of 400 mm sweep AC wall mounting fan with metal blade including connection etc as required:-

Supplying & installation of 400 mm sweep AC wall mounting fan with plastic blade including connection etc as required:-

Supplying & installation of 450 mm sweep wall mounting air circulator including connection etc as required:-

Supplying & installation of 450 mm sweep AC padestal air circulator including connection etc as required:-

Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:-

Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:-

Supplying & installation of 380 mm sweep 900 rpm metalic body exhaust fan including connection etc as required (ISI marked) :-

Supplying & installation of 450 mm sweep 1400 rpm metalic body exhaust fan including connection etc as required (ISI marked) :-

Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:-

Supplying & installation of shutter for 380/450 mm sweep metalic body exhaust fan in the existing hole as required:-

Supplying & installation of metalic fan clamp box of standard size with 3mm thick bakelite/plastic cover as required:-

Dismantling the existing ceiling fan and making winding by (34/35/36 S.W.G) Copper wire, varnish, oiling, greasing and re-fixing the same including wiring the down rod of standard length ( up to 30 cm ) etc. as required :-

Supplying and fixing of 20 mm dia extra down rod (GI Pipe Medium Guage) with necessary hole for installation of ceiling fan as required.

Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:

Supplying and fixing of following vertical storage water heater 5 star catagory complete with 15 amps top, connection pipes including necessary connection etc as required.

10 litre storage capacity:-

15 litre storage capacity:-

25 litre storage capacity:-

Supplying and fixing of following accessories for water heater including connection etc as required as per direction of site Engineer.

Heating element / Coil

Thermostat/ Thermal cutout.

Supplying and fixing of following luminaries complete with necessary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours):-

Box type single FTL fittings of CRCA steel sheet housing complete with 36/40 W FTL, electronic ballast and high quality reflector cover : -

Supplying and fixing of the following Lamps & accessories including connection etc. as required.

25/40/60/100 watt GLS lamp:-

18/20 watt T-8/T-12 FTL lamp:-

36/40 watt T-8/T-12 FTL lamp:-

14/28 watt T-5 lamp:-

11 watt CFL 2 pin/4pin PL lamp :-

18 watt CFL 2 pin/4pin PL lamp :-

36 watt CFL 4pin PL lamp :-

FTL starter:-

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-

Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:-

Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):-

Recessed/Surface mounted 1ft x 1ft decorative 16/18 watt LED panel light with integral driver and high quality polycarbonate diffuser:-

Recessed round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:-

Recessed round/Square shaped 15 watt LED downlight with integral driver and high quality polycarbonate diffuser:-

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-

36 watt LED street light fixture with integral driver and secondary lens (IP 66):-

45 watt LED street light fixture with integral driver and secondary lens (IP 66):-

120 watt LED flood light fixture with integral driver and secondary lens (IP 66):-

Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-

18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):-

9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-

18 watt LED PL-Lamp with integral driver and high quality polycarbonate diffuser :-

Supplying and installation of change over switch of following ratings with enclosure including necessary connection etc. as required:-

200 amps FP on load change over switch (Front handle with enclosure):-

250 amps FP on load change over switch (Front handle with enclosure):-

400 amps FP on load change over switch (Front handle with enclosure):-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.

(2+4) / 6 way SPN MCB DB (double door):-

(2+6) / 8 way SPN MCB DB (double door):-

(2+10) / 12 way SPN MCB DB (double door):-

4 way horizontal TPN MCB DB (Double door):-

6 way horizontal TPN MCB DB (Double door):-

8 way horizontal TPN MCB DB (Double door):-

12 way horizontal TPN MCB DB (Double door):-

4 way vertical TPN MCB DB suitable for FP MCB incomer (Double door):-

6 way vertical TPN MCB DB suitable for FP MCB incomer (Double door):-

Supplying and installation of powder coated steel sheet enclosure for 415 volts MCCB (TP/FP) complete with necessary connection etc as required:-

Enclosure suitable for MCCB upto 100 amps:-

Enclosure suitable for MCCB above 100 amps upto 250 amps:-

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-

6 to 32 amps SP MCB:-

6 to 32 amps DP MCB:-

6 to 32 amps TP MCB:-

6 to 32 amps TPN MCB:-

6 to 32 amps FP MCB:-

40 amps DP MCB:-

40/50/63 amps TP MCB:-

40/50/63 amps TPN MCB:-

40/50/63 amps FP MCB:-

MCB Module RYB indicator light:-

Supplying & installation of RCCB (sensitivity 30mA to 300mA) of following ratings in the existing MCB DB including connection etc as required:-

16 to 40 amps DP RCCB:-

63 amps DP RCCB:-

Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):-

16 to 100 amps TP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):-

16 to 100 amps FP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):-

125 amps FP MCCB, Breaking capacity 25KA (Thermal Magnetic) :-

160 amps FP MCCB, Breaking capacity 25KA (Thermal Magnetic) :-

200 amps FP MCCB, Breaking capacity 25KA (Thermal Magnetic) :-

250 amps FP MCCB, Breaking capacity 36KA (Thermal Magnetic) :-

Supplying and fixing of aluminium terminal ends (LUGS) - long barrel of following sizes : -

Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: -

Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : -

1.5 sqmm - 4 sqmm Cable:-

4 sqmm - 10 sqmm Cable:-

10 sqmm - 16 sqmm Cable:-

Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-

25 mm dia

Supplying and fixing of 20 mm MS pipe as down rod for installation of luminaries with necessary accessories etc as required.

Supplying & fixing of 40 mm dia G.I pipe (medium gauge) cross bar for fixing of ceiling fan/luminaries including painting & necessary accessories etc as required.

Supplying & installation of following power contactors including necessary connection etc as required:-

3 pole 9 amps (AC3) power contactors with 1NO+1NC Aux. Contact.

3 pole 12 amps (AC3) power contactors with 1NO+1NC Aux. Contact.

3 pole 18 amps (AC3) power contactors with 1NO+1NC Aux. Contact.

Cleaning of existing ceiling fan/luminaries.

Supplying and fixing of following Cable tray made of hot dip galvanised iron:-

30 mm x 50mm:-

54 mm x 100 mm

105mm x 150mm

Supplying installation and fixing of following 10 watt LED Cross Pin LAMPS including necessary connection etc. as required. (OSRAM Make: Model : LVSTICK 10W/830 220-240V G24D APM)

10 watt LED Cross PIN

Hiring of Skilled Wireman/Electrician for providing of round the clock duty for all days of a month beyond Government duty hours including all Govt. holidays for upkeeping & mtc of the existing electricals installations i.e light fixtures, fan, outdoor lights, feeder pillars main electrical panel, distribution panel including restoration/replacement of defective components along with addition/altercation IE installations etc. as per the directions of the Engineer-In-Charge.

01 (One) Electrician/ Skilled wireman for 01 (One) shift in a day. (276 Working Days)

01 (One) Electrician/Semi-skilled wireman for 01 (One) shift in a day (365 Days a Year)

Please Enable Macros to View BoQ information