Building

Name of Work:-Constrction of Library Building at Village Kauka

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification Rate In

Quantity Unit Amount

No. and reference to book of specifications) Figures

1 Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff 57.70 Cum.

upto 50 Meter lead. (A) Loose or soft soil

2 Providing and laying Cement concrete 1:4:8 (1

cement:4 coarse sand:8 Graded Stone Agg.

mm nominal Size ) & Quaring etc. complete. 23.72 Cum.

Excluding cost of form work in (A)Foundation &

3 Brick work using common brunt clay building

bricks having crushing strength not less than

kg/sqcm. in superstructure above plinth level

upto floor two level in cement mortar 1:6 (1

cement :6 fine sand) etc.comp. (B) Conventional

4 Providing and laying cement concrete 1:3:6 (1

cement : 3 coarse sand : 6 crushed stone

aggregates 20 mm nominal size) and curing 2.76 Cum.

complete including cost of form work in (A) Wall

5 Filling in plinth with sand under floors

including watering ramming, consolidating and 40.23 Cum.

dressing complete

6 Brickwork using common burnt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Super Structure above plinth level 46.70 Cum.

up to floor two level in C.M.1:6 etc, (B)

7 Half brick masonary in common burnt clay

building bricks having crushingstrength not less

than 35kg/Sq.Cm in cement mortar 1:4 (1 2.21 Sqmt

cement ::4 coarse sand) in foundation and plinth

(B) Conventional

8 Provdg & laying Ordinary cement concrete

1:1.5:3 (1cement : 1.5 coarse sand 3 graded

stone aggragate 20 mm nominal size) and

finishing the smooth with curing etc. complete

including the cost of formwok but excluding the

cost of reinforcement for RCC work in (II) 8.76 Cum.

COLUMNS (i) Having cross sectional area more

than 0.08Sq.M and upto 0.18 Sq.M (10494 +

cement Difference (70x5.234x1.15))

9 Providing and laying ordinary Cement concrete

1:1.5:3 (1 Cement 1.5 coarse sand 3 graded

stone agg. 20 mm nominal size) for RCC lintel

including finishing smooth with curing etc.

complete includiong the cost of formwork but

excluding the cost of reinforcement. (8634.45 +

cement difference (70x5.234x1.15))

10 Providing and laying ordinary cement concreate

1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded

stone aggregates 20mm nominal size) and

curing complete Including cost of form work in (i) 4.91 Cum.

Beam Having cross-sectional area 0.08 to

sq. m. (7589 + cement difference

11 Provdg & laying cement concrete 1:1.5:3

(1cement : 1.5 coarse sand 3 graded stone

aggragate 20 mm nominal size) for reinforced

concrete chhajjas not exceeding 10 cm.

Thickness upto floor two level including finishing

the exposed surfaces with cement mortar 1:3 (1 1.04 Cum.

cement : 3 fine sand) to give a smooth and even

surface centering and form work and curing

complete excluding cost of reinforcement.

(6487.07 + cement difference (70x5.234x1.15))

12 Provdg & laying Ordinary cement concrete

1:1.5:3 (1cement : 1.5 coarse sand 3 graded

stone aggragate 20 mm nominal size) and

finishing the smooth with curing etc. complete

including the cost of formwok but excluding the 9.89 Cum.

cost of reinforcement for RCC work in (II) slabs

having more than 10 cm and upto 13 cm

thickness. (6819.95 + cement difference

13 Provi. Providing thermo Mechanically treated

bars (TMT bars) confirming to IS 1786 / FC

for R.C.C. works including, bending, bindign and 2780.65 kg

placing in position complete upto floor 2 level.

14 Providing and fixing single shutter flush door with

standard alluminium colour anodized hollow

section frame approved shade & colours &

rectengluar tube shape main frame of jindal

section No. 4656 of the size 101.60 mm x

mm x 1.63 mm having weight 1.089 kg per

metre filled with country wood 35 mm thick flush

door laminated both side with 0.8 mm thick

lamination of the make sunmica / Decolam

formica or equivalent lamination, using U type 5.04 Sqmt

alluminium beading around door, three nos of

stainless steel hinges for shutter of required size

fixtures fastenings & all other hardware fixtures

and fastenings like handles, stopper, aldrap tadi,

shall be of stainless steel of approved quality &

size directed by Engineer in charge etc.

15 Providingg and fixing extruded aluminium

windows having extruded aluminium colour

anodized section frame main outer size 95 mm x

24 mm x 1.17 mm (of jindal section No. 2459 @

Wt. 0.738 Kg/ mt) horizontal four trak member

size 92 mm x 31.75 mm x 1.30 mm (of jindal

section No. 8688@ Wt. 1.07Kg/ mt) vertical

member of size 92 mm x 31.75 mm x 1.50 mm

(of jindal section No. 8933 @ Wt.1.06 Kg/ mt)

with sliding shutters of horizontal member size 10.29 Sqmt

40 mm x 18 mm x 1.29 mm (of Jindal Section no.

8947 @ wt. of 0.456 Kg/ mt) Vertical member of

size 40 mm x 18 mm x 1.29 mm ( of Jindal

section No. 8949 @ Wt. of 0.456 Kg/ mt) with

mm thick transparent bronze colour tinted float

glass with powder coated aluminium silicon

sealant glass fixing to frame as per details etc.

16 provdg & fixing M.S. grills of required pattern to

wooden frames of window etc. with M.S. flats at

required spacings and frame alround, square or 257.25 kg

round bars with round headed bolts and nuts or

by screws (A) plain grill

17 Providing and laying 24” x 24” Vitrified 8 mm

thick Tile flooring over 20 mm (Avg) base of C.M.

1:6 on new surface or fixing on Extg. Flooring by

adhasive material incl. Dismentalling of extg.

Flooring & jointed with colour cement slurry 77.70 Sqmt

finished with flush pointing & cleaning the

surface etc. complete for light shade.

18 Providing and laying Vitrified tiles 8 to 10 mm

thick in skrting risers of steps and dedo on

mm thick cement plaster 1:3 (1 Cement 3 coarse 6.81 Sqmt

sand) and jointed with white cement slurry

19 Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or Full/half

brick walls for interior plastering upto floor two

level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand) Ground

20 Providing & laying10 mm. thick cement plaster

in single coat on fair side of ceilings for interior

plastering upto floor two level and finishing with

smooth mala plaster.(i) Cement mortar 1:4 (1

cement : 4 sand) Ground Floor

21 20 mm thick sand faced cement plaster on walls

upto height 10 meters above grouund level

consisting of 12 mm thick backing coat of

C.M.1:3 (1 Cment : 3 sand) and 8 mm thick

finishing coat of C.M.1:1 (1 Cement 1 Sand)

Watering curing etc. comple.

22 Applying two coats of Birla or Asian acrylic lapy

(putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the 259.91 Sqmt

surface free from mortar dropping and otheer

foreeign matter and sand papered smooth.

23 Wall painting (Two coats) with plastic emulsion

paint of approved brand and manufacture on

undercoraed wall surfaces to give an even shade

incl. thoroughly brushing the surface free from 259.91 Sqmt

mortar dropings and other foreign matter and

sand papered smooth.

24 Providing cement vata (10x10 cm.size quarter

round in C.M.1:1 including neat cement finishing 34.60 rmt

watering etc, complete.

25 Finishing wall with weather proof exteriod

emulsion paint on wall surface (Two coats) to

give an required shape even shade after

thoroughly brushing the surface to reemove all

dirt and remains of loose powdered materials

26 Providing & laying broken china mosaic flooring

for terrace using 12 mm to 20 mm broken places

of glazed tiles to be laid over cement morter 1:3

in plain or slope and to be tempered to bring

mortar crème out up to surface using white 49.50 Sqmt

cement including rounding off junction and

extending them up to 15 cm along thee well

cleaning with water and oxalic acid as directed.

27 Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe

to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC / 10.00 Point

Metallic box, single mounting base frame

covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed. CAT- III

28 Point wiring for looped PLUG with tissino type

single pole ISI marked 6 A. switch and 6 A

socket erected with necessary connections

erected on polished wooden block / Metal / PVC 14.00 Point

box covered with 3 mm. thick laminated sheet for

open / concealed wiring. S.O.R.P.No.1/Sr.No.1-1-

29 Pipe type earthing having 150 cms long and 2.5

cms dia galvanised iron pipe with coupling and

buch burried inspecially prepared earth pit 1.00 Each

complete with necessary 8 SWG earth wire.

30 For using salt and charcoat / coke as required

for pipe type earthing.

31 Approved make ceiling fan with condenser A.C.

230 V50 Cys.1200 mm. sweep complete canopy

and 30 Cms. down rod resistance type regulator

erected on existing hook or clamp with 24/0.2 flat 4.00 Each

3 core flexiblewire with earthing fan approved by

Engineer in charge. (or R.C. rate)

32 Approved make C.F.L lamp retrofit 9/11 watt

erected if required cat-II

33 Plastic encloser fitted with din rail suitable for

incorporating one / two nos. MCB

34 UGVC Ltd. meter connection charges 1.00 Each 5670.14

35 Poswer connection charges from UGVCL/ GEB

incl. in all Estimate charge & meter connection 1.00 Each

given by UGVCL/GEB.

36 Providing &fixing Approved make Sumercible

Horizontal Pump 1.0 HP with Necessary 1.00 No

Switches wiring board etc. completed.

37 Providing & fixing Florcat tube light fuze , chawk,

Statar of Philips / Bajaj as approved by Engineer 10.00 No

38 Providing and fixing pre-cast Rubber Dye inter

locking concrete block 60 mm thick with grade of

concrete M-200 pnumatic compressed by

mechanically passed and as per approved 45.00 Sqmt

design including 75 mm sand layer for levelling

and filling the joint with sand in proper line and

level etc. complete. (RA)

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be written in

figures and words) of the estimated rate mentioned above Amount of my / our tender works out as under.

*Estimated amount put to tender *Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ………........% Above

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed

by the Engineer – In – Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt G.R.: PRC-10/2017 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where the reisa change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the

Executive Engineer

Signature of the contractor Panchayat (R & B) Division