Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 LAccepted-AOC | L1 | Accepted-AOC Successful bidder | |
| 2 | L2₹11.3 L+₹72,573.36 (6.88%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹11.3 L+₹79,490.06 (7.54%)Rejected-Finance MIL STN AGARTALA | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹11.4 L+₹88,624.20 (8.41%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹11.5 L+₹94,864.36 (9.00%)Rejected-Finance ABHAYNAGAR JAGATPUR PO ABHAYNAGAR AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹10.4 L
EMD Value
₹20,780
Closing Date
8 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
PROVN OF STORAGE ROOM NEAR BLDG NO T-307 IN ZONE N AT MIL STN AGARTALA
2023_MES_586296_1
8386/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE(I) AGARTALA
₹20,780
Yes
4 May 2023
18 Mar 2023
10 Apr 2023
18 Mar 2023
8 Apr 2023
1 Apr 2023
Amount
Schedule'A' Part-I: B&R works
Surface excavation n.exc 30 cm deep and averaging 15 cm deep
Excavation in trenches n.exc 1.5 M wide and n.exc 1.5m deep as in soft/loose soil for foundation etc or for shaft walls, cesspit, manhole etc n.exc 10Sqm on plan and n exc 1.5 m depth and getting out.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft/loose soil
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point
M & L for Cement Concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in foundation filling and mass concrete.
M&L for 10mm dia and over mild steel TMT bars cut to length bent to shapes as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified..
All as per item No.6 but 5mm to 10mm dia as in Stirrups, spaces & binders complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.
M&L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete in Square, rectangular or polygonal etc.
M&L form work to rough finished flat surfaces of chajjas,troughs and similar items including edges etc.
M&L form work to rough finished flat surfaces of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves etc of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete in Square, rectangular or polygonal etc.
M & L reinforced cement concrete (Nominal Mix) 1:2:4 20mm graded stone aggregate type B1 for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L RCC type B1 (1:2:4) using 20 mm graded stone aggregate columns, pillars, piers, posts and struts rough finished.
M&L for reinforced cement concrete type (Nominal Mix) 1:2:4 20mm graded stone aggregate type B1 using 20mm graded stone aggregate as in slab supported in walls, beams, cantilivers, bressummers, lintels over 11.5m Span all as specified and directed.
M&L for reinforced cement concrete type (Nominal Mix) 1:2:4 20mm graded stone aggregate type B1 using 20mm graded stone aggregate as in Chajja all as specified and directed.
M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cm 1:4
M&L for rolled mild steel as in roof trusses ( framed) trussed, purlins, crane gamtries, rail,and fastening and heavy brackets framing (Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E250) quality-B complete all as specified and directed.
Material and labour PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection 75 mm thick finished fair and even w/o using extra cement.
Maroom/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering.
M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L PCC 25 mm thick type B-1, 1:2:4 ( 20mm graded aggregate) as in floor as per leveling course all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces brick work or concrete surfaces mixed with water proofing compound (WPC shall be measured and paid seperately)
M&L for 10mm thick plaster on fair faces of brick or concrete surfaces in CM 1:6 complete all as specified.
Supply of Liquid water proofing compound ( as per manufacturers & Instructions).
M & L for preparation of new plastered surfaces by applying 3mm wall care putty and applying two coats of oil bound distemer over a coat of primer on new plastered surfaces .
M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer after preparation of new plastered surfaces to receive paint complete all as specified and directed by Engr-in-Charge.
S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked book bolts and washers, in roofs, walls etc with grade of zinc coating 275.
S&F plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded .
M&L mild steelwork such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165
Cutting bolls in to brick wall for inserting hold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick.
S & F 4 mm thick sheet glass ordinary quality & glazing with oil putty in squares n exe 0.5 sqm in each pane
S&F pressed steel frames for doors of (size 125X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
M&L for 2 coats of synthetic enamel paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.
S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides.
M & L preparation of new wooden surfaces with two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth.
S&F 125mm size MS butt hinges, medium weight cold rolled mild steel.
S&F 150mm size extruded aluminium alloy handles, fabricated type anodised.
S&F 200mm long aluminium anodized barrel tower bolts of extruded section.
S&F Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with nad including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate.
M&L for 2nd class HW in small fittings such as wooden cleats stopper including all necessary labour article n.exc 200 cm each.
Schedule'A' Part-I: E & M works
Material and labour for point wiring (surface type) with PVC insulated, 1100 volts FRLS grade, unsheathed, single core, multistranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and continuous earth wire drawn through and including PVC casing -N-capping (medium duty) double lock type of 20 mm size with fittings & accessories, pressed steel sunken terminal box (Consealed in wall) made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet for fixing switches, regulator etc and earth continuity conductor shall be connected to common earth and earth dolly for one light / fan point controlled by one 1 way switch complete all as specified and directed. Note. Cost of cutting of wall, if any, for housing of pressed steel sunken terminal box and also making good the disturbed surfaces are deemed to be included in the unit rate.
All as per item No.42 above but for 3/5 pin 6 Amps socket outlet on the same board with other switches complete all as specified and directed
Material and labour for point wiring (surface type) with PVC insulated, 1100 volts FRLS grade, unsheathed, single core, multistranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 Sqmm (nominal area) continuous earth wire drawn through and including PVC casing -N-capping double lock type of 20 mm size with fittings & accessories, pressed steel sunken terminal box (Consealed in wall) made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet for fixing switches, regulator etc and earth continuity conductor shall be connected to common earth and earth dolly for 3/5 pin 16 Amps socket outlet complete all as specified and directed. Note. Cost of cutting of wall, if any, for housing of pressed steel sunken terminal box and also making good the disturbed surfaces are deemed to be included in the unit rate.
M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS grade, Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through & including PVC cassing capping with 4.0 Sqmm PVC insulated copper wire single core for continuous earthing complete all as directed. NOTE: (a)Two run of 4.0 Sqmm & one run of 4.0 Sqmm cable shall be measured as single run.
Material & labour for switch piano flush button 6 Amps single pole, 1 way complete all as specified and as directed.
Material & labour for socket outlet 5Pin, 6 Amps flush type complete all as specified and directed
Material & labour for switch socket combination, 2 in 1, 3 pin 6 / 16 Amp, piano flush type complete all as specified & directed.
Material & labour for ceiling rose, surface bakelite, 65mm x 50mm , three terminals complete all as specified & directed.
Material & labour for electronic fan regulator (step rotary type), AC 240 volt complete all as specified and as directed
Supply & fix MCB single pole 32 Amps, 240 volt, 10 KA, C series with all incoming / outgoing connections with proper size of lugs complete all as specified and directed.
Supply & fix MCB single pole & neutral 6 to 32 Amps, 240 volt, 10 KA, C series with all incoming / outgoing connections with proper size of lugs complete all as specified and directed.
Supply & fixing MCB DB (single door) SPN, 08 way sheet steel with bus bar, din rail, neutral link an earth bar all as specified and directed.
M&L earthing complete with galvanised iron earth plate electrode of size 60 cm x 60 cm x 6.0 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to glavanised earth wire 4mm diameter by means of Bolts, Nuts, check nuts and washers including earthing pit in PCC ( 1:3:6) type C-1 RCC pre-cast (1:1.5:3 type A-1) cover slab duly reinforced with 8.00mm dia TMT bars @ 100mm C/C as reinforcement, 12 mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part- 1.
Supply and fixing LED lights fitting 1x 20W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 240 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminum conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sqmm x 4 core nominal cross section in service connections.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.
M/S SANKAR GOPE
M/S PRITAM ENTERPRISES
M/s Amrit Gope
M/S SWAPAN DEBNATH
Pranjit kar
M/S PAUL ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .