Construction of Nagarpalika Library at Chorwad, Dist. Junagadh

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (C) By mechanical

means in area of light jungle

Excavation for foundation upto 1.5 m depth including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto 50 Cmt 357.70 627.47

Meter lead.(E) Hard Rock

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

3 out and stacking of useful materials and disposing off the excavated stuff Cmt 120.40 651.26

upto 50 Meter lead.(E) Hard Rock

Filling in plinth and foundation with sand under floors including

watering ramming, consolidating and dressing complete

5 20cm. thickness including watering, ramming and consolidating etc. Cmt 671.80 301.78

complete. (more than 10 ton)

Filling available excavated earth (excluding rock) in trenches.

6 plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth Cmt 0.00 136.92

consolidating each disposited layer by ramming and watering.

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistent with I.S.I specification. Using Chlordane and

Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one

7 percent is recommended i.e one liter 20 EC chemical emulsion with 19 liter Smt. 276.20 59.46

give 1 % concentration inclusive of one liter chemical emulsion application

at the rate of 5 Liter chemical/ Sqm of surface is recommended as per I.S.

(The Product performance shall carry Guarantee for 5 years)

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-

9 crushed stone aggregates 20 mm nominal size) and curing complete Cmt 0.00 4,152.60

including cost of formwork in (A) Wall Caps / Coping

GRADE SLAB (M200) : Providing and laying controlled cement concrete

M.200 Concrete with all lead, including all transportation, pumping,

10 pouring, curing of concrete etc complete including the cost of formwork but Cmt. 37.10 4,900.07

excluding the cost of reinforcement for reinforced concrete work in M200

Grade Slab

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

11 centering & shuttering in true line and level etc, but excluding the cost of Cmt. 61.70 4,825.78

reinforcement for RCC work in Foundations footings, base of columns and

Raft etc., for any type of cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

12 centering & shuttering in true line and level etc, but excluding the cost of Cmt. 11.00 6,888.20

reinforcement for RCC work in column up to plinth lvl. etc., for any type of

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

13 centering & shuttering in true line and level etc, but excluding the cost of Cmt. 46.20 6,807.40

reinforcement for RCC work in TIE, GROUND, & PLINTH BEAMS for any type

of cross sectional area. etc., complete as directed by E. I. C.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

14 reinforcement for RCC work in (F) Wall (Vertical and horizontal fins)., & (F1) Cmt. 28.50 7,956.78

Wall cap & coping up to G.F. level., etc. Complete, as per detailed & directed

by Architect / Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

15 reinforcement for RCC work in (F) Wall (Vertical and horizontal fins)., & (F1) Cmt. 2.50 7,998.39

Wall cap & coping For First Floor level., etc. Complete, as per detailed &

directed by Architect / Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

16 reinforcement for RCC work in (F) Wall (Vertical and horizontal fins) & (F1) Cmt. 0.20 8,040.00

Wall cap & coping For For Second Floor level., etc. Complete, as per detailed

& directed by Architect / Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area for G.F. Lvl. etc., for any type of cross section area complete

as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area Work at First floor etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area Work at Second floor etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in LINTLE-BEAM, LINTEL & SILL & COPING for all

cross sectional area at G.F. Lvl. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

21 centering & shuttering in true line and level etc, but excluding the cost of Cmt. 6.80 7,091.61

reinforcement for RCC work in LINTLE-BEAM, LINTEL & SILL & COPING for all

cross sectional area at F.F. Lvl. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

22 centering & shuttering in true line and level etc, but excluding the cost of Cmt. 4.40 7,133.23

reinforcement for RCC work in LINTLE-BEAM, LINTEL & SILL & COPING for all

cross sectional area at S.F. Lvl. etc., complete as directed by E. I. C.

Providing and laying Controlled cement concrete M:25 and Curing Complete

for reinforced concrete Chhajjas up to all floor two level including finishing

23 the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to Cmt. 10.10 7,082.22

give a smooth and even surface centering and formwork and curing

complete excluding cost of reinforcement. etc., complete as directed by E. I.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

24 centering & shuttering in true line and level etc, but excluding the cost of Cmt. 28.90 7,050.00

reinforcement for RCC work in SLAB BEAMS for Ground floor & Super

structure, & for any type of cross sectional area. etc., complete as directed

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

25 centering & shuttering in true line and level etc, but excluding the cost of Cmt 19.80 7,091.61

reinforcement for RCC work in SLAB BEAMS at First Floor & for any type of

cross sectional area. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

26 centering & shuttering in true line and level etc, but excluding the cost of Cmt 5.20 7,133.23

reinforcement for RCC work in SLAB BEAMS at Second Floor to Terrace Floor

& for any type of cross sectional area. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

27 centering & shuttering in true line and level etc, but excluding the cost of Cmt 13.20 6,825.08

reinforcement for RCC work in Staircase with steps / Kadi Tappa, waist slab

and landing at any height and level as directed etc., complete as directed by

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

28 centering & shuttering in true line and level etc, but excluding the cost of Cmt 43.40 6,857.80

reinforcement for RCC work at Plinth to Ground FLOOR SLAB for all

thickness/cross section etc. complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

29 centering & shuttering in true line and level etc, but excluding the cost of Cmt 33.40 6,899.31

reinforcement for RCC work at FIRST FLOOR SLAB for all thickness/cross

section etc. as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete

including cost of necessary, form work, compacting with vibrator curing

30 centering & shuttering in true line and level etc, but excluding the cost of Cmt 9.90 6,940.92

reinforcement for RCC work in SECOND FLOOR SLAB for all thickness/cross

section etc. complete as directed by E. I. C.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

31 bending, binding and placing in position complete upto ground floor level Kg 33645.00 77.29

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto First floor level

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

33 bending, binding and placing in position complete for Second floor to Kg 3813.00 79.39

terrace floor Lvl.

Brick work using common burnt clay building bricks having crushing

34 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Cmt 50.10 4,214.33

Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement Mortar

1:6 (1-Cement :6-finesand) (B) Conventional For Ground Floor etc.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at First floor Lvl. in cement Mortar 1:6

(1-Cement :6-finesand) (B) Conventional For First Floor etc. Complete.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at Second floor to terrace floor Lvl. in

37 cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For above First Cmt 26.40 4,580.91

Floor to Terrace Floor etc. Complete, as per detailed & directed by EIC.

Half brick masonry in common brunt clay building bricks having crushing

38 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - Smt 117.00 684.26

coarse sand ) (B) Conventional half brick masonry at Ground Floor level.(B)

Conventional

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Half brick masonry in common brunt clay building bricks having crushing

39 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - Smt 98.00 690.57

coarse sand ) (B) Conventional half brick masonry at First to Terrace Floor

Lvl.(B) Conventional

Half brick masonry in common brunt clay building bricks having crushing

40 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - Smt 20.50 696.87

coarse sand ) (B) Conventional half brick masonry at Terrace Floor Lvl.(B)

Conventional

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any height

41 with all labour & material, etc. Complete, as per detailed & directed by EIC. Smt 223.30 326.13

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

42 of single or half brick walls for interior plastering for Ground floor level and Smt 411.30 172.04

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

43 of single or half brick walls for interior plastering for First floor level and Smt 394.60 195.94

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering at Second Floor to

Terrace floor level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand)

Providing 10mm thick cement plaster in single coat on brick/concrete

45 Ceiling for interior plastering for Ground Floor level and finished even and Smt 293.30 155.35

smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Providing 10mm thick cement plaster in single coat on brick/concrete

46 Ceiling for interior plastering for First Floor level and finished even and Smt 266.60 179.24

smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Providing 10mm thick cement plaster in single coat on brick/concrete

47 Ceiling for interior plastering at Second Floor to terrace floor Lvl. and Smt 51.20 203.14

finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Providing and applying ready mix concrete plaster on RCC elements to give

expose finish including 2mm thick base coat of same material and 3mm

48 thick top coat of concrete platser of approved shade and brand. Job Smt 456.60 1,016.12

includes proper griding of RCC joints before applying plaster complete with

scafolding directed as per Architect and EIC

Providing 20mm thick double coat external cement plaster on brick/

concrete work for plastering comprising of base coat of 12mm thick cement

plaster in cement mortar (1 Cement:4 coarse sand) in rough finishing and

8mm thick top coat of cement mortar 1:2 (1 Cement: 2 Coarse sand)

finished rough / with Trovel including scaffolding curing etc. complete.

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement

: 4 coarse sand ), furrowing the under layer with scratching tool, applying

cement slurry on the under layer @ 2 Kg of cement per square metre, top

50 layer 15 mm cement plaster 1:1/ 2:2(1 cement: 1/2 coarse sand : 2 stone Smt 508.40 995.30

chipping 10 mm nominal size), in panels with groove all around as per

approved pattern, including scrubbing and washing the top layer with

brushes and water to expose the stone chippings ,complete as per

specification and direction of Engineer-in-charge

Add for plaster groove in plastered surface or moulding to R.C.C.

projections.

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry Smt

mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A)

25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

53 Cement : 3 coarse sand) and jointed with gray cement slury mixed with Smt 41.90 1,109.07

pigment to match the shade of slab including rubbing

and polishing etc. complete.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

54 existing flooring by adhesive material including dismentaling of existing Smt 33.50 1,467.72

flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for antiskit.

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" or as

specified in skirting risers of steps and dedo on 10mm thick. cement plaster

55 1:3 (1-cement: 3-coarse sand) and jointed with white cement slurry as per Smt 250.90 1,195.02

the detailed by Architect & direction of Engineer-in- Charge.

Providing and laying Ceramic tiles 6mm thick in flooring, treads of steps

and landing laid on a bed of 12mm thick Water proof cement plaster with

mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing Chemical Agent

56 and cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 Smt 34.00 1,096.00

including neat cement finishing, watering etc. complete finishing with flush

pointing in white cement. (For UG tank flooring)

Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps and

dedo on 10mm thick Water proof cement plaster with mortar 1:3 (1-cement

57 : 3- coarse sand ) & Water Proofing Chemical Agent and finishing with flush Smt 99.00 1,283.76

pointing in white cement. (For UG Tank walls)

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished

at all exposed Surface, Pre-moulded and pre-polished, machine cut Granite

of any colour and shade, & finish, as per detailed by architect /

Consultantfor flooring, dado skirting, cladding, steps and risers, kitchen

platforms, vanity counters, window sills , fascias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick

58 mortar 1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting on Smt 159.00 3,400.27

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse

sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including Spacer tape 6.4 mm thick x 4 TO 6 mm as per

detailed groove, rubbing, curing, moulding and polishing to edges to give

high gloss finish as per concept etc. complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5

laid over and jointed with grey cement slurry including rubbing and

59 polishing etc. complete. (B) 30mm thick. Smt 106.00 1,090.70

Providing and fixing sandwich type platform including supplying and fixing

granite stone 18 mm thick mirror polished stones in top and side position

and vertical strip at front over 25 mm thick polished kota stone platform

60 fixing in top and sides and intermediates supports fixing with cement Smt 3.00 7,478.49

mortar and adhesive and finishing including making recess for Kitchen/

Laboratory sink etc. complete as approved and directed by Consultant / EIC.

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

61 using white cement including rounding off junctions and extending them Smt 275.30 779.70

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

directed. (The Product performance shall carry Guarantee for 10 years)

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-

62 coarsesand: 4-graded stone aggregate 20mm nominal size) laid in one layer Smt 29.30 339.08

and finished with a floating coat of neat cement. (B) 50mm thick.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows,

clerestory windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length Incl.

Providing and fixing 35 mm thick (or as specified) ISI marked flush door

shutters conforming to IS : 2202 (Part I) decorative type, core of block board

construction with frame of 1st class hard wood, with 1mm. thk, ISI marked

63 designed laminate in any finish on both faces of shutters., slit openings with Smt 41.20 6,771.29

bidding Patti & 6mm thk designed acid wash glass,. Stainless Steel butt

hinges [125x65x2.5mm. IS1281712] with necessary screws, using branded

S.S. matt /glossy / platinum finished accessories, Colour / polishing all

bidding parts, and also incl. with all Material, labour, tools, tolerance,

scaffolding etc. complete as per concept /direction and approved by

Architect, and directed by Engineer-In-Charge.

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-

DOMAL Series OR Equivalent), hI-perfomance Sliding/ Openable

window/door with Required thick toughened designer glass of Saint Gobain

or equielent, is used for Aluminum Hi-Profile Section with necessary

accessories and with additional shutter with Stainless Steel Mosquito net. [In

Opening Position always one of Mosquito net shouter should be in Close

Position], captive bead, extremely difficult to remove once glazed, high

performance weather stripping, internal wedge gasket, Bottom, side and top

64 section including necessary filling up the gaps at junctions, with required Smt 112.40 7,742.61

EPDM rubber/ etc. and ISI ebco make,"Lx. Premium" Required Finish door

fixture Accessories As per Architect Concept, High security interlocking

bead, Sheet membrane flashing , 2" over jamb flashing, New Blocking with

new backer rod and sealant, channel glide with runner, slide fold hinge

when ever need of sufficient capacity, with warranty, all types of material,

labour, transportation, tools tolerance and matching required level with

Flooring etc. complete as per Architect concept and as per detailed by

Architect / consultant & Directed by EIC.

Providing and fixing standared extruded of alluminium section of size

65 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized Smt 4.50 1,175.56

alluminium frame for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

Providing and fixing hydraulic door closer of approved size and make as

directed engineer in charge. all lift, level and leads.

Providing & Fixing M.S. grills of required pattern to wooden frames of

windows, RCC or as specified in drawings etc. with M.S. flats at required

spacing & frame around, square or round bars with round headed bolts &

nuts or by screws (A) Plain Grill, as per detailed & directed by EIC.

Providing, supplying, fixing, fabricating, erecting, aligning the structural

steel like pivot ,tubular 'T', 'I" section, angle, plate, beam, channel section,

Bar , hollow box or Z purloins, Round or Square Pipes, of approved make,

for built up purloins, roof trusses, columns, side runners, tie beams, sag

rods, base plates gusset plates, cap plates, bearing bracing, gantry girders,

rails, require support, pipes, including all welded or bolted steel structures

of various types with approved I.S.I. mark electrodes, bolts, anchor bolts

including cost of thread, Anchor plate cleats etc. in RCC or masonry work,

68 including cutting, bending, welding ,fixing, supplying , Fabricating Kg 1756.00 131.83

Decorative fevisted section or any structured member required to complete

the job for Bridge, Trusses, Canopy, doors, Frame, Railing, Entrance gate,

pergola, Decorative hanging light , New window, parking shed or space

frame or any other required specified area as shown on drawing and

detailed specification or as per design incl. three coats of approved brand

primer and two coats of paints, necessary scaffolding, tools tolerance etc.

complete as directed by Engineer In Charge. (payment will be made for

weight of metal used in the work)

Finishing wall with Weather proof exterior emulsion paint on wall surface

69 (two coats) to give an required shape even shade after thoroughly brushing Smt 801.90 120.26

the surface to remove all dirt, and remains of loose powdered materials.etc

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Wall painting (two coats) with plastic emulsion paint of approved

brand & manufacture on undecorated wall surfaces to give an even shade

including thoroughly brushing the surface free from mortar droppings &

other foreign matter & sand papered smooth, as per detailed & directed by

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Ceiling painting (Two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated Ceiling surface to give an

even shade including thoroughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth, as per

detailed & directed by EIC.

Painting two coats (including priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the surface

of all dirt, dust and other foreign matter.

Providing and fixing roof panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc coating of minimum

120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the

sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have

73 plastic protective guard film of minimum 25 microns to avoid scratches Smt 10.00 867.39

during transportation. The ridge shall be fixed to the steel members by pop

rivet or self drilling/self stitching fastners @ maximum 450 mm c/c along

length of capping/flashing etc complete .

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS

pipe of 16 gauge, round balustrade of 32mm [50mm 16G Grade 304 with

glossy finish consisting of 32 NB or nearest size vertical posts 900 Height at

maximum spacing 900c/c with suitable cups at bottom and top rail of

NB or nearest size & intermediate rails of 16 NB or nearest size etc

complete] with complete assembly of SS studs to house the horizontal

74 16mm pipes and top handrail, bend and coupler to be used as per Rmt 51.80 3,646.91

architectural detail drawings for the railing in parapet, stair etc. including

fabricating, hoisting, fixing in position with angle cleats, holdfast etc. in

RCC or masonry in true line level and plumb, including complete assembly,

including matt polishing and buffing complete, including scaffolding etc.

complete as directed by EIC.(Actual length of stair railing shall be measured

at site & same shall be paid. No wastage should be measured or paid.)

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, [top rail of 50 NB or

nearest size complete] with complete assembly, bend and coupler to be

used as per architectural detail drawings for the railing in parapet, stair etc.

75 including fabricating, hoisting, fixing in position with angle cleats, holdfast Rmt 38.30 1,356.18

etc. in RCC or masonry in true line level and plumb, including complete

assembly, including matt polishing and buffing complete, including

scaffolding etc. complete as directed by EIC.(Actual length of stair railing

shall be measured at site & same shall be paid. No wastage should be

measured or paid.)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic Grade

Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm.

Descaling and degreasing the board as per requirement using epoxy

reflactive process by screen painting as directed etc. complete including

76 transporting and fixing in C.C. 1:2:4 with necessary excavation curing etc. Smt. 4.50 7,610.66

complete as per I.R.C. 67-2012 design. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B)Class B Type-4(MDR/ODR) retro

reflective sheeting

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane over uniform surface of slab. Apply 2 coats at

dosage of 1.5 kgs per sq.m to achieve the required minimum DFT of

1.5mm. It should have following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

3. Elongation % ≥ 700%

77 4. Dosage 1.2 - 1.5 kg/m2 in two coats Smt 296.30 979.14

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

(The Product performance shall carry Guarantee for 10 years)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

78 vibrated mechanically and as per approved design Confirming to IS 15658 : Smt 844.33 706.93

2006 including 35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length, 30cm height and 15cm thick of M200 grade

79 concret as per approved design and including excavation for fixing in Rmt 100.00 402.55

proper line and level, filling the joint with C:M 1:3 (1 cement:3 fine sand) etc

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: M20 Cement

Concrete laid in required slope at concrete floor as directed and specified

using necessary steel form work with M.S. Channels including forming

construction & contraction joints 4 mm to 6mm wide by cutting the floor up

to ¼ th depth of thickness of the concrete depth using mechanical saw and

sealing the joint with poly sulphide sealant up to full depth of cutting

80 including providing & fixing M.S. dowels bars with bitumen painted of full Cmt 7.50 7,346.39

length as shown in drawing as to form the bays not exceeding 6.0 m X

m etc. complete as per directed by Architect or Engineer-In-Charge. For all

level and leads.(a) For RCC Road Note: Rates are Incl. cost of Cement

Concrete Pavement shall be 150mm. Thk. or as detailed and rolling 2 times

as per mentioned above and also all tools tolerance, shuttering, channel,

etc. complete as per detailed & Directed by Architect & EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type

B pipe confirming to IS 13592-1992 with one end plain & other end socket

with rubbering & Fixing conforming to ISI 14735-1999 of approved make

for drain system pipe line, pipe shall be jointed with each other with rubber

81 lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm Rmt. 57.50 876.90

dia x 210mm length x 196mm high at every 2000mm centre to centre or

shall be concealed in wall as directed necessary fittings such as bends,

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM as per

82 IS 9079 at departmental stores with following MOC: Casing: CI-FG260, Nos 1.00 24,240.00

Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m head

Control panel- DOL / Star Delta starter suitable for local & remote pump

control application consisting of MPCB, overload relay and contactors as per

83 Type II coordination including digital voltmeter, analogue ammeter with Nos 1.00 6,993.24

accessories.

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two Rmt.

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & Fixing gun metal check or no return full way wheel valve etc.

complete as per the instruction of EIC. (C) 25 mm. Dia

Providing & Fixing gun metal check or no return full way wheel valve etc.

complete as per the instruction of EIC. (E) 40 mm. Dia

Providing and fixing screw down bib taps of following size.(A) Brass screw

down bib tap polished bright. (i) 15mm dia.

92 Providing and fixing brass screw down stop tap.(B) 20mm dia. Each 7.00 223.81

Providing erecting and fixing double coated ISI water tank of required

93 capacity each with all necessary fittings and connection etc. complete on Liter 8000.00 3.95

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm

diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of the

94 following nominal diameter of self cleansing design with C.I screed down or Each 14.00 586.27

hinged grating including the cost of cutting & making good the walls, as per

detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

95 and water tight C.I. cover with frame of 300mm x 300mm size (inside) with Each 8.00 1,292.19

standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type.

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

internal dimensions, total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with

96 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm Each 6.00 2,932.93

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls &

bed concrete for (i) Inside dimensions 455mmx 610mm & 450mm deep for

single pipe line. etc. complete as per detailed, directed & approved by the

consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished

with a floating coat of neat cement & making channels in cement 1:2:4 mix (

1 cement : 2 coarse sand :4 stone aggregate 20mm nominal size ) finished

97 smooth complete including curing & testing… ( I ) inside 900mm x 1200 Each 6.00 19,349.63

mm & 1.5 m deep including R.c.c. cover with frame size 560 mm diameter (

A ) with 230mm thick walls of brick masonry using brick having crushing

strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse sand ),

(2) B type depth 1.50 Meter for 150mm diameter sewer.. etc. complete as

per detailed, directed & approved by the consultant / EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing Septic Tank of 5.00 mt x 3.00 mt x2.00 mt size for Sewerage

including excavation with any strata up to four meter depth,PCC in Bottom

98 Slab 1:3:6,Brick Work in cement mortar 1:5, RCC M250 Slab on Top And Each 1.00 1,36,221.73

bottom, required filling for Tank including making Required line for water

inlet, precast RCC M.200 Frame & cover etc.as directed by engineer in

charge. etc complete, septic tank as per detailed drawing.

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

99 dia x 210mm length x 196mm high at every 2000mm centre to centre or Rmt. 126.00 834.38

shall be concealed in wall as directed necessary fittings such as bends,

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete Light

100 duty non-pressure pipes I.S. class NP2 of the following internal diameter Rmt. 40.00 434.28

with collars and butt ends prepared for collar joints including testing of

joints complete.(D) 300mm

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear

dimention including the cost of excavation, P.C.C. 1:4:8 and filling brickbats

with dry masonry work, Honeycomb masonary work, M:20 RCC. SLab incl.

101 form work including FE-500 Reinforcemnt, M.S.cover, C.I. Pipe & cowl vent, Each 1.00 35,135.88

vatas in C.M. 1:3 with finishing curing etc. complete as directed.. etc.

complete as per detailed, directed & approved by the consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter wash

basin with single hole for pillar type with Cl or MS brackets painted white

including cutting holes, ranking bolts for Fixing & marking good the same,

including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm

dia pillar tap, Bottle Trap, as approved, capstan head C.P. screwed down

102 high pressure with screw shank & back nuts & rubber plugs, 15mm dia Each 4.00 2,942.94

brass stop cock (50/75mm p.v.c. Drain connection pipe, Water Connection

Pipe of required Size, & testing the same for leak proof, etc. with all material

& labours to complete this job in all respected manners, etc. complete as

per detailed & approved by the consultant & directed by EIC.

Providing and fixing wash down water closet (European type,Wall hung W.C.

Pan) with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and cover

103 for wash down water closer with C.P. brass hinges, C.P. brass toilet paper Each 4.00 7,001.62

holder, Jet Spray, Metropole flush valve Incl. Connection and rubber buffers.

(A) Vitreous China., etc. complete as per detailed & approved by the

consultant & directed by EIC.

Providing and fixing water closet squatting Pan including trap and foot rest

104 (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete to be Each 1.00 1,436.33

measured and paid for separately) (A) Vitreous China.(I) Long pattern =

White colour

Providing and fixing Urinal or approved quality including conecting the

105 Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or Each 2.00 1,074.86

corner type size 430mm x 260mm x 350mm.

Providing & Fixing C.P. brass towel rail Approved Make complete with C.P.

Brass brackets fixed to wooden plugs with C.P. Brass screws,, etc. complete

106 as per detailed, directed & approved by the consultant / EIC. (B) 600mm x Each 5.00 616.42

20 mm size, etc. with all material & labours to complete this job in all

respected manners, etc. complete as per detailed & approved by the

consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass

mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden

107 plugs with C.P. brass screws & washers, etc. with all material & labours to Each 5.00 859.41

complete this job in all respected manners, etc. complete as per detailed &

approved by the consultant & directed by EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & Fixing handicap toilet set with Wall-mounted European Closet &

wash basin & all handicap requirement with dual flush tank, seat & lead

(heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted

brackets, Waste Coupling, 32mm size bottle trap etc. all Internal fittings

complete with grab rails, swin type grab bar etc. rubber buffers, C.P nuts,

108 bolts etc making holes in walls & floors, & finishing for ready to use. The Each 1.00 40,425.96

rate includes all necessary connection charges as per product detail to the

satisfaction of Architect / engr. in-charge where required & the final

handing over etc. complete as per specifications, drawings & as directed by

the Engineer-in-charge. The scope includes Providing and fixing all the

necessary fittings of approved brand and as per directed by Architect/EIC.

Providing & Fixing pillar tap, screw down high pressure with screws, shanks

& back nuts. (i) 15mm dia.

110 Providing & Fixing brass screw down stop tap. (A) 15mm dia. Each 6.00 205.83

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,

111 painted white including cutting holes in walls and making good the same Each 0.00 2,326.66

but excluding fittings.

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling Piping

Work as Per Directed By Engineer In Charge

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

drain pipe etc. and repairing the hole after insertion of drain pipe etc. with

113 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate Each 20.00 1,161.50

20 mm nominal size), including finishing complete so as to make it leak

Point wiring in Copper (Modular) Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling complete with

6A Modular type switch / bell push & accessories and earth continuity of

114 following type, erected on PVC / Metallic box, single mounting base frame Pt. 53.00 485.81

covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed

in / flushed on wall/ceiling, complete with earth continuity and necessary

connection with primary light with accessories erected on Metal / PVC box

115 covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / Pt. 78.00 167.66

concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains

for Secondary Point. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in / flushed

on wall/ceiling complete with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with separately mounted and

116 accessories with earth continuity of following type erected on PVC / Metallic Pt. 33.00 674.68

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic

117 box covered with appropriate front plate modules erected on / in wall / Pt. 40.00 510.05

ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic

118 box covered with appropriate front plate modules erected on / in wall / Pt. 4.00 745.38

ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (FRLS) CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic

119 box covered with appropriate front plate modules erected on / in wall / Pt. 6.00 915.06

ceiling as per pipe erected with following type of accessories.

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (FRLS) CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

120 textured / metallic front plate modules erected on / in wall / ceiling with Pt. 80.00 257.55

following type accessories.

Single mounting base-frame & Textured / Metallic front plates. Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling ,complete with 6A Modular type

switches and following type of accessories erected on PVC / Metallic box,

121 single mounting base frame covered with textured / metallic front plate Pt. 6.00 603.98

modules erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

122 front plate , modules erected with necessary connection. As desired by Ea. 20.00 25.25

Engineer In charge

(7) Blank Plate Single Cat-III

123 Decorative call bell Ting-tong box type 250 volts complete erected Ea. 1.00 71.71

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

124 metallic/white front plate , modules erected with necessary connections as Ea. 11.00 160.59

per site situation directed by Engineer In charge.

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary

125 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Mtr. 500.00 33.33

following dia of pipes, in approved manner as directed b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary

126 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Mtr. 40.00 67.67

following dia of pipes, in approved manner as directed d) 40 mm

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

127 coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 Mtr. 200.00 21.21

(A) Supplying and laying UPVC cable trunking system comprising

128 unplasticised polyvinyl, chloride rigid material with ignition free & flame Mtr. 70.00 277.75

proof confirming BS .All necessary accessories and measuring of following

sizes. (1) 75 mm x 50 mm trunking

(A) Supplying and laying UPVC cable trunking system comprising

129 unplasticised polyvinyl, chloride rigid material with ignition free & flame Mtr. 300.00 188.87

proof confirming BS .All necessary accessories and measuring of following

sizes. (3) 50 mm x 50 mm trunking

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

130 on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated Mtr. 600.00 62.62

stranded wire of green colour for earth continuity of following size (general

wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

131 stranded wire of green colour for earth continuity of following size (general Mtr. 1200.00 82.82

wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling

132 with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of Mtr. 250.00 112.11

green colour for earth continuity of following size (FRLS) (a) with medium

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

133 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps Mtr. 10.00 284.82

or in existing trench / pipe of following size of cables

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

134 Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or Mtr. 100.00 287.85

in existing trench / pipe at road crossing or floor of following size of

cable. (B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

135 Solid Copper conductor for 1.1 KV. to be laid on wall with necessary Mtr. 40.00 364.61

clamps or in existing trench / pipe at road crossing or floor of following

size of cables. (B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

136 Solid Copper conductor for 1.1 KV. to be laid on wall with necessary Mtr. 300.00 510.05

clamps or in existing trench / pipe at road crossing or floor of following

size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

137 Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or Mtr. 120.00 676.70

in existing trench / pipe at road crossing or floor of following size of

cables. (A) 4 core 10 Sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

138 grade ISI marked copper wires of following size to be erected as directed.(e) Mtr. 250.00 46.46

1.50 Sq.mm 3 core round PVC sheathed

Providing and, fixing heavy duty flange type brass cable gland with rubber

139 ring for PVC insulated armoured cable complete with out going tails, Ea. 8.00 33.33

insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber

140 ring for PVC insulated armoured cable complete with out going tails, Ea. 6.00 38.38

insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber

141 ring for PVC insulated armoured cable complete with out going tails, Ea. 4.00 38.38

insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and, fixing heavy duty flange type brass double compression type

142 cable gland with rubber ring for PVC insulated armoured cable complete Ea. 2.00 75.75

with out going tails, insulating tape etc for following size of cables. (B) 3 &

1/2 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

143 of following size evenly crimped with high pressure tool & connected to Ea. 2.00 15.15

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

144 of following size evenly crimped with high pressure tool & connected to Ea. 6.00 20.20

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (D) 35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of

145 following size evenly crimped with high pressure tool & connected to Ea. 160.00 8.08

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for cable of

146 following size evenly crimped with high pressure tool & connected to Ea. 8.00 10.10

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

Making trench in soft soil of suitable width of 90 cms deep for laying cable

147 or locating the fault all over the run and backfilling the same and making Mtr. 200.00 55.55

the surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

148 accessories of same material at required depth for laying of cable. below Mtr. 160.00 62.62

ground / road surface for enclosing cable and back filling the same to

make ground as per original. (A)50 mm dia

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

149 accessories of same material at required depth for laying of cable. below Mtr. 180.00 95.95

ground / road surface for enclosing cable and back filling the same to

make ground as per original. (C)90 mm dia

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

150 current rating up to 25 A to 100A. with Fixed thermal & magnetic release Ea. 1.00 6,173.12

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A

151 suitable to operate on 240 V A.C. system and having breaking capacity 10 Ea. 93.00 112.11

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark -

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

152 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Ea. 4.00 668.62

having following capacity (b)40 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

153 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Ea. 2.00 587.82

having following capacity (a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

154 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Ea. 7.00 647.41

having following capacity (b)40 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

155 appropriate nos. of MCBs.(The DBs should be used of same company of MCB Ea. 2.00 1,152.41

to be used) suitable for (A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-43) (iii)8 way

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

156 appropriate nos. of MCBs.(The DBs should be used of same company of MCB Ea. 4.00 2,913.85

to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel

double door (ii)6 way

Providing and erecting Sheet Steel powder coated Vertical MCB distribution

board (VTPN) - flush / surface mounted double door (IP54) fitted with

insulated copper busbar, isolated neutral link, earth bar and DIN rail,

157 confirming to IS 13032 and BS 5486-1986,IP-54 suitable for 63/100 AMP Ea. 1.00 18,663.60

TPN MCCB + RCCB as incomer and three phase outgoing as per following

.(The DBs should be used of same company of MCB to be used)

(D)12 way outgoing

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

158 and suitable for operation on single phase 240 V,50Hz. having Ea. 10.00 1,969.50

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as

directed (i) 25 Amps.DP Cat. III

Supplying & erecting approved make IP 55 grade Company fabricated Timer

Panel of following capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly epoxy power painted

159 inside and outside with hinged doors and locking arrangement consisting of Ea. 1.00 12,399.77

suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog time

switch, auto manual switch of same make and suitable input and output

Bakelite terminals and with door earthing approved by Engineer in

charge.(A) 32 Amp

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

160 and suitable for operation on single phase 240 V,50Hz. having Ea. 6.00 2,235.13

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95,

161 CCT 3000 K to 6500K, Nos. 10.00 295.93

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

162 Luminaire efficacy> 85 lumens/watt , Nos. 11.00 220.18

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (i) 9 watts,Surge-2 KV Cat-lll

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

163 Luminaire efficacy> 85 lumens/watt , Nos. 29.00 427.23

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (ii) 11 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

164 Luminaire efficacy> 85 lumens/watt , Nos. 87.00 758.51

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (iv) 24 watts, Surge-2 KV Cat-lll

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminium housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 160 to 270 V,Power Factor

165 more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Nos. 10.00 2,201.80

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iii) 36 watts Cat-lll

Providing and erecting PVC body surface or pendent mounting LED Bulk

type 9 watt Lighting Fitting with electronic driver. And lumen output from

166 luminaire 720lm , input voltage range 90-300VAC , 50Hz cool white(3000 Nos. 5.00 787.80

to 6500k), inbuilt driver, -20degC to +60degC working temperature, AL

frame with Beam Angle 120deg

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D

167 mtr. Long duly painted with two coats of aluminium paint complete with Nos. 10.00 3,225.94

metallic base plate of 300 mm x 300 mm x 4mm thick for using as a

compound light pole with approx. weight 32 Kg.

Providing and erecting street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and

168 having spread of 1 mtr. length with suitable rise as per site condition & Nos. 10.00 561.56

suitable welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms. [A] Single Arm

bracket 1 Mtr

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & erecting approved make street light / wall mounting junction

box compression moulded from SMC (thermoset plastic) vertical sliding

169 cover having locking with square head stud loop in / loop out in built Nos. 10.00 616.10

terminal suitable for four core cable, waterproof of I.P. 54 protected with

clamp or bolt nut & earth bolt of following size. (B) 250mm x 194mm x

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

170 ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high Nos. 10.00 809.01

upper ground level with necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

171 cm. down rod erected with earthing.(Make shall be approved by Engineer in Nos. 33.00 2,056.36

charge) including Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly painted for fan complete

with proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

172 the RCC bars up to 50mm length each side and pierced through a 16 Nos. 33.00 108.07

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Supplying & erecting approved make low noise decorative exhaust fan

174 having square frame ABS body with inbuilt lowers & square frame. 250mm Nos. 9.00 1,366.53

with 1350 RPM Cat.II

Providing and erecting required size HOT dipped Galvanised iron strip for

175 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using Kg. 100.00 77.77

proper clamp.

Providing and erecting required size Copper strip for earthing of H.T. OCB /

ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

SWG.Using for DB earthing wire 8 to 16 SWG.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia

of 40 mm having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved make OEM

has to submit test certificate including value of earth resistance of

178 installation duly stamped and signed by agency and officer Incharge has to Ea. 2.00 7,095.25

ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency. [B] For

Electrical installation up to 11 KV located in other than normal soil i.e.

Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia

of 40 mm having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved make OEM

has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to

179 ensure the value of earthing resistane mentioned in test Certificate) & Ea. 2.00 10,593.89

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency. [C] For

Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling

Supplying & Compound :2 nos make

erecting approved Bags of

LAN25 cable

Kg. of following size in existing

pipe as per direction. [C] CAT -

Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base rectifier &

Inverter & sealed maintenance free SMF batteries. The charger having

operating capacity for input 160-270V AC & inverter having output

181 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage Nos. 1.00 82,941.20

output with over load & short circuit protection equipment. The system

housed in CRC sheet duly powder coated paint with following power

backup.with MS painted batteries stand, 10% Overload capacity for

momentary load. (C) 3 KVA with 1Hr Backup

Providing and erecting water cooler having storage capacity 80Ltr. & cooling

capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚ C within a hour, The water cooler should be

182 comprising of hermetically sealed compressor, fan motor, condensing unit, Ea. 1.00 49,559.69

water tank surrounded by evaporating coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump capacity

183 80 psi, mention with 40 psi inline type post carbon filter auto low & high Ea. 1.00 29,187.99

pressure switches with following size of storage tank & LPH capacity &

erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Providing Water proof straight Joint in PVC insulated flat flexible copper

184 cable by using insulating material, water proofing material, & making the Ea. 10.00 189.88

joint complete. (A) Up to 10Sq. mm

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q CPPLUS MAKE

AS PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image Sensor (0.8758

centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × 1440)@1-

185 25/30 Instastream, H.265, H.264, H.264H, H.264B, MJPEG Support Triple Nos 13.00 4,156.15

stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital

watermarking3.6mm fixed Lens Support Built-in Mic IR Range of 30 Mtr.,

IP67, PoE complete with rj45 connector crimping, PVC back box

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ CPPLUS

MAKE AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image Sensor (0.9407

Centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × 1440)@1-

186 25/30 Instastream, H.265, H.264, H.264H, H.264B, MJPEG Support Triple Nos 6.00 8,080.00

stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital

watermarking3.6mm fixed Lens Support Built-in Mic IR Range of 50 Mtr.,

IP67, PoE complete with rj45 connector crimping, PVC back box

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP PLUS MAKE

- 32 Ch. 4K Network Video Recorder AS PER SPECIFICATIONS : Up to

channel IP camera input Max. decoding capability: 8 × 1080p@30 fps, 2 ×

MP@30 fps Smart Instastream/H.265/H.264 /MJPEG Max. 160/128/60

187 Mbps incoming/recording/outgoing bandwidth Support 2 SATA HDDs up to Nos 1.00 18,180.00

20TB, 2 (1 front USB 2.0 port, 1 rear USB 2.0 port) HDMI / VGA

simultaneous video output Support Multi-brand network cameras ONVIF

Version 2.4 conformance Mobile Software: iCMOB, gCMOB CMS Software:

KVMS, KVMS Pro Lite

Supply Installation Testing & Commissioning of 4TB Surveillance Harddisk

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS PER

SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo gigabit SFP slots.

PoE power budget is up to 250 W, making it ideal for small to medium

business surveillance systems. Port Priority is able to guarantee the quality

of sensitive application like video monitor. PoE Auto Recovery automatically

189 reboots your dropped or unresponsive PoE-powered devices. Nos 3.00 15,150.00

Intelligent power management protects the switch from overload. QoS

ensures smooth traffic for latency sensitive applications. IGMP Snooping

optimizes multimedia traffic delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5

190 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN - TP- Nos 2.00 3,030.00

Link Archer C50 AC1200 or equivalent

191 SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9 Nos 1.00 23,482.50

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets,

192 mounting trays, exhaust fan complete with accessoreis - 600 X 600MM Nos 1.00 9,595.00

approx. size -- Elirix make

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker input

Power:8 Watt RMS Power Taps:8/4/2W on 100 V Freq.Responce:60-

193 15,000Hz, SPL (1w/1m):92db,Dim./Wt: ø 227 X H77mm/0.78kg, Model Nos 20.00 2,222.00

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having following

specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux.,

194 frequency Response :50-1500HZ I3db, Tone, Controls :Cut & Boost type, Nos 1.00 22,725.00

LED Meter : 5 LED Arrays, The amplifier suitable to operate 240V A.C.&

24volt D.C. (Battery) with automatic changeover from AC to Battery

operation, duly protected by wrong Battery Polarity connections.

Supplying & erecting Mixing Console having channels, Audio mixer with.

Echo facility for live performance, Auditorium & stadiums, having following

features & facilities. (a)input Channels :- Each channel has separate

6.25mm size balanced phone jack for mike & line for balanced &

unbalanced signals (b)Individual gain control for sating optimum level for

minimum noise (c)BASS, MID & TREBLE ‘ controls Separately for each input

channel (d)ECHO control for each channel (e)PAN control for echo channel

for left or right output (f) AUX Control : To control , level of the channel in

final mix to AUX sound output (g)Channel ON/OFF switch (h)ECHO Section :-

ECHO, reverb & Chorus effect can be added to all input channel by different

setting of Delay, Reverb & Level control (i)Tape section (j)Aux. send & return

For sending Pre-feeder output of channel for monitoring or adding a special

195 effect unit (k)Mono / Stereo output controls (m) Head phone output for Nos 2.00 38,632.50

monitoring purpose.

Technical specification:

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Output

Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K

ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB (e)frequency

Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB ) (f)Equalization

Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line

Output Line Output Low : -10 dB / -2 dBM , Line Output High : 0 dBM / +17

dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0 dB,

0.775V) The Console shall be mounted on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer with ECHO

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust resistant

sound column with Aluminium case & Aluminium mesh grille with foam

frequency response 150-20000 Hz with following specifications (b) With

196 speakers having power handling capacity of 23W(MAX) & 15 W (RMS), each Nos 2.00 5,050.00

speaker have impedance of respectively 670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather & Dust

resistant ceiling/ wall mounted sound speaker with decorative case & mesh

impedance having frequency response 150-20000 Hz with following

197 specifications (b) With 2 speakers having power handling capacity of Nos 4.00 7,575.00

23W(MAX) & 15 W (RMS), each speaker have impedance of respectively

ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-605, GMB-

6C or equivalent in Bosch /Shure etc.

199 SPEAKER WIRE Mtr 500.00 85.85

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

200 accessories by means of extra supplied proper insulated copper Each 2.00 56,353.96

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas

charging and 15A plug top & Remote Control & MS Stand) with necessary

core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton

capacity - Premium Cat.

Liaisoning work for additional load for requirement, electrical power

201 connection charges and inspector approval for power(to be paid to concern Lot 1.00 50,500.00

electrical power supplier company)

Conventional type Smoke detector having following specifications : Dual

LED’s for 360 visibility. Advanced detection and communication protocol.

Easy installation and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54 Standard.

Operating Voltage : 10 ~ 28V DC. O O Operating Temperature : 0 C to

202 C. Relative Humidity : 10% to 90% Nos 18.00 1,146.35

Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start Up

Time : 30 Seconds.

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote Output

: 15mA maximum open collector. Smoke Sensitivity : 0.10 to 0.16 dB/m.

Thermal Rating : 57 C(135 F). complete with Junction box RAVEL make cat

Conventional type Fire Alarm Panel having Following specifications : CE

Approved. 16 X 2 Dot Matrix LCD Display. Standby battery backup with built

in charging. Switch Mode Power Supply. Tactile eypad for easy panel

operation. System ON indication. Low Battery visual warning with audible

ton. Fire / Fault status in unambiguous colored LED indication.

programmable relays for fire,supervisory and fault. All zones accept smoke

detectors and any normally open contact device. Any Zone can be

203 configured as alarm or supervisory. Zone wise isolation and one man walk Nos 1.00 9,595.00

test facility. Programmable Aux Outputs. Lamp test & Drill test facility.

All Events log with RTC. Date / Time / Password configuration.

Programmable auto silence facility. Zone wise sounder / contact optional).

TCP-IP / GSM facility (optional). 120 / 230VAC + 10% -15%, 60 / 50 Hz,

50W Operating Temperature 0 – 49° C / 32 – 120° F. Storage Temperature

– 60° C Relative Humidity 93 ± 2% RH (non-condensing) at 32 ± 2° C / 90 ±

3° F Charging voltage Charging current 28 V ± 5% 350mA (max) - RAVEL

SITC ofcatHooter

/ Sounder as per following specifications : Operating Voltage

: 24V DC Operating Current : 40mA Sound Level : 85dB@1m Operating

Temperature : 0 – 49° C / 32-120° F. Sounder Type : Piezo Electric Type

204 Tone Type : Fire Engine Siren Material : ABS Plastic Colour : Red Dimensions Nos 3.00 949.40

: 96 H mm X 76 L mm X 28 D mm Back Box : 95 H mm X 75 L mm X 58 D

mm Mounting Type : Surface / Flush Mount complete with Back Box - RAVEL

make cat no. RE24CS

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

SITC of Manual Call Point as per following Specifications : Operating Voltage

205 : 24VDC Operating Current : 30mA Colour : Green / Yellow / Red Material : Nos 3.00 808.00

Plastic IP Rating : IP-50 Size : 86 X 86 X 50 mm - RAVEL make Cat no.

Supplying, Installation, Testing and commissioning of Jockey Pump

10.8M3/hour @70M Head.Horizontal Centrifugal End Suction. with

206 M.S.fabricated common base plate, coupling, coupling guard, foundation No. 1.00 1,19,041.95

bolts etc. for motor and details pump specificaion follow as per

specification as mentioned in tender volume..

Supplying, installation, testing and commissioning of electric driven

Monoblock Fire pump 960LPM at 70 m head 2900 RPM pump. suitable for

automatic operation and consisting of following: complete in all respect as

207 required. With Suitable HP, SQ cage induction motor TEFC type suitable for Set 1.00 2,52,399.00

operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for

enclosure, horizontal foot mounted type with class 'F' insulation,

conforming to IS:

Diesel Operated pump 70m head, 2900 RMP with day tank & battery set

complete with 100 ltr diesel

Control Panel for the operation of Jockey pump, Fire pump Electric and Fire

pump Diesel with automation

Providing, fixing, testing & commissioning of Pressure Switches for

automation of fire pumps. Pressure switches shall be double pole single

210 throw type suitable for 3 phase supply with diaphragm. Aluminum Enclosure Nos. 3.00 2,400.47

with IP 66 protection follow as per specification as mentioned in tender

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,

Washers, Gaskets etc. follow as per specification as mentioned in tender

211 volume.. Nos. 2.00 10,090.94

of size: 150mm dia.

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,

212 Washers, Gaskets etc. follow as per specification as mentioned in tender Nos. 2.00 6,107.98

of size: 100mm dia.

Supplying, Installation, Testing and commissioning of C.I.Ball type Foot

valve conforming to I.S:13095 class PN 16rating with Fittings, Flanges,

213 Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned in Nos. 2.00 18,533.30

tender volume..

of size: 150mm dia.

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-

214 Return Valve class PN 16 rating with fittings, flanges, nutbolts, washers, Nos. 2.00 11,041.19

gaskets etc.of sizes: 150mm dia

Providing, fixing, testing and commissioning of Above Ground MS. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including cutting, screwing, welding

215 etc. and providing all fittings like flanges, bends, tees, elbows, reducers, Meter 35.00 2,391.95

clamps, hangers etc. with painting of one coat of primer and 2 or more

coats of synthetic enamel paint of approved make / shade complete as per

specification. 150mm dia

Providing, fixing, testing and commissioning of Above Ground MS. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including cutting, screwing, welding

216 etc. and providing all fittings like flanges, bends, tees, elbows, reducers, Meter 15.00 1,744.20

clamps, hangers etc. with painting of one coat of primer and 2 or more

coats of synthetic enamel paint of approved make / shade complete as per

specification. 100mm dia.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing, fixing, testing and commissioning of Under Ground M.S. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

217 3589 (upto 200 mm dia. And above) with IWL/pypecoat, 4mm thickness Meter 10.00 3,265.73

wrapping and coating and providing all fittings like flanges, tees, elbow,

fasteners with all follow as per specification as mentioned in tender

volume.. 150mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

218 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 80.00 363.56

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat

of primer and two coats of fire red / PO red 25 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

219 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 40.00 459.50

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat

of primer and two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

220 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 25.00 575.64

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat

of primer and two coats of fire red / PO red 40 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

221 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 15.00 797.82

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat

of primer and two coats of fire red / PO red 50 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

222 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 15.00 949.31

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat

of primer and two coats of fire red / PO red 65 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

223 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 30.00 1,201.78

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat

of primer and two coats of fire red / PO red 80 mm dia.

Providing fixing testing and commissioning of GUN METAL 15 mm size

224 quartzoid bulb type sprinklers, set to operate at 57 degree Centigrade. Nos. 85.00 399.96

Pendent type type with required accessories complete. (GUN METAL)

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying , installation, Testing & commsioning of Flexible Drop 1000mm

Providing, fixing, testing and commissioning of RRL Fire delivery hose

mm Dia in 15 mtrs length with ISI MARKS is 636 type ‘A’ Fitted with

226 Stainless Steel male & female coupling ISI Mark IS :903 duly binned with Nos. 4.00 6,502.28

copper wire winding follow as per specification as mentioned in tender

Supply installation ,Testing & commissioning of single headed oblique

pattern ISI hydrant landing valve with 80 mm dia flanged inlet & 63 mm dia

227 instantaneous type female outlet complete with PVC cap and chain, twist Nos. 2.00 7,650.75

release type lugs WITH all accessories as per SI Standard Conforming to IS-

5290. (SS 304- Body SS-304 Coupling)

Providing, fixing, testing and commissioning of weatherproof standard fire

228 Hose Cabinet wall mounting type 18 Gauge. (750 x 600 x 250) having Nos. 2.00 6,189.79

Double Opening with M.S. fabricated stand, necessary lock & key

arrangement follow as per specification as mentioned in tender volume..

Supply installation ,Testing & commissioning of SS Fire Brigade connection

229 consisting of 2WAY. 63 mm instantaneous type male coupling with 125 mm No. 1.00 7,650.75

Dia. flanged outlet complete for fire water tank.

Supply installation ,Testing & commissioning of SS Fire Brigade connection

consisting of 4WAY. 63 mm instantaneous type male coupling with 125 mm

Dia. flanged outlet complete for fire water tank.

Providing, fixing, testing and commissioning of Wall mounting Fix type First

aid Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS : 444 Type II

fitted wit SS Shutt off Nozzle follow as per specification as mentioned in

tender volume..

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supply installation , testing & commissioning of ISI Standard SS-304 branch

pipe with nozzle of 20mm nominal bore outlet as per IS:903 suitable to fit

with standard instanteneous type 63mm dia coupling (SS-304)

Supply installation testing & Commissioning of 25 MM dia Air Realese valve

complete in all respects. (GUN METAL)

Supply installation testing & Commissioning of Pressure guage 4" dial 0 to

16 kg/cm2 with syphon and cock complete in all respects (SS-304).

Supply installation testing & Commissioning of 25 MM dia Ball Valve (SS-

304) complete with SS Ball with single handed lever complete in all

Providing & Installation of ABC Stored Pressure Type Fire Extinguisher 6 Kgs.

capacity bearing ISI Mark for Fighting ABC Class of Fire. The Extinguisher

will be Manufactured Strictly as per BIS: 15683:2006 bearing ISI. Mark follow

as per specification as mentioned in tender volume..

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity, made

from the brand new seamless cylinder, as per IS: 7285 and CCE approval,

fitted with a Discharge hose and horn and wheel type valve with initial

Charge as per IS: 15683:2006 specification, bearing ISI Mark follow as per

specification as mentioned in tender volume..

Providing & fixing Modular type ABC Dry Powder Fire extinguishers 5 litre

238 capacity Fire Extinguishers. The Extinguisher will be Manufactured Strictly as Nos. 5.00 4,447.03

per BIS: 15683:2006 bearing ISI. Mark follow as per specification as

mentioned in tender volume..

Providing, fixing, testing and commissioning of On -Off Switch follow as per

specification as mentioned in tender volume..

Providing, fixing, testing and commissioning of below Auto Glow Signages

240 follow as per specification as mentioned in tender volume.. Emergency Exit Nos. 2.00 233.17

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

241 Getting of Fire Fighting System Approval from local fire authority with all Job. 1.00 30,300.00

other charges and documentations for getting No Objection Certificate.(as

per GMB Approved rate)

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & fixing laminate finish partition up to false ceiling ht (thickness

of partition is 82 mm or as specified in drawing) having 12 mm thick

marina plywood IS 710 grade both side on aluminum framing of gauge

Aluminum framing size for vertical & horizontal support is 50 mm x 25 mm.

Grid of aluminum framing is 600 mm x 600 mm. All exposed surfaces

finished with 1 mm thick Laminate of approved shade complete with mat

finish. Necessary framing to be erected above false ceiling. No extra cost to

be paid for the same. Before installation, make hole/face plate for conduit

pipes of electrical / networking cables with open able stud from partition

242 Including all materials and labor etc. Make necessary grooves as per shown Sqm 4.00 6,620.55

in drawing. Using of 12 mm thick clear glass with proper crystal edges &

with suggested frosted films on glass. All joints are covered with teakwood

beading Patti finished with polish matching with laminate. Including door of

same design if required Complete with all necessary hardware & adhesives

as per details given in drawing and as per instructions of

Architect/consultant/Engineer In charge. Contractor has to provide all

necessary cut outs (race ways.) for Electrical works & no extra payment shall

be made for it.

Providing and fixing eco-friendly light weight calcium silicate false ceiling

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% noncombustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation . The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

per sqm at joints to get required length and size of 24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to centre, and centre to

centre to form agrid of 1200X600mm and secondary thick (Minimum) sheet

to be interlocked at middle of the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a perimeter wall angle

pre-coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm centre to centre with

25mm long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved

texture (Fine Fissured/Cosmos/Spintone) in the grid

Providing & fixing work station / table having ht of 750 mm Top, with MS

specified powder coating and Back and side Ply of table is also made up of

19mm Thick. Top of Table is 19mm thk ply with laminate Finish Per

Requirement and All internal & external Joints finished with teakwood

244 beading Patti. Common or front Part of Table is Sectationized with MS Sqm 42.00 24,870.53

Perforated Sheet. All exposed and internal surfaces covered with Laminate

Finish of approved shade & Complete as per detail drawings & as instructed

by Architect/consultant/ Engineer In charge. Complete with all necessary

hardware like nails, ss screws, table chain, Key board trey, TDS channel,

adhesives etc. Contractor has to provide all necessary cut outs for Electrical

works & no extra payment shall be made for it.

Providing & fixing office table / staff table having ht of 750 mm Top, with

19mm thk plywood or MS pipe Structure as per Architect/ Engineer Design

Top of Table is 19mm thk ply with laminate Finish Per Requirement and All

internal & external Joints finished with teakwood beading Patti. Item

includes fixing of drawers and keyboard tray and storage with shutters

245 under table as per drawing. With grooves shown as per drawing. All Sqm 8.00 29,350.96

exposed and internal surfaces covered with Laminate Finish of approved

shade & Complete as per detail drawings & as instructed by

Architect/consultant/ Engineer In charge. Complete with all necessary

hardware like nails, ss screws, table chain, TDS channel, adhesives etc.

Contractor has to provide all necessary cut outs for Electrical works & no

extra payment shall be made for it. All ply should follow IS

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600

mm, having skirting of 75 mm, including vertical supports & horizontal

shelves shown as per drawing made by 19 mm thick Marin ply, Open Front

Side for Selves with using 12 mm thick Marin ply for framing. All complete

with proper teakwood beading and Teakwood molding as per design. Back

246 ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Laminate Sqm 60.00 10,381.62

& internal surfaces are covered with 1 mm thick laminate. External &

internal joints covered with beading Patti complete with polish finish. With

grooves shown as per drawing. All complete with proper hardware like, S.S.

Screws, MS Nails, Magnets, cable manager SS 304 etc. All Details as per

shown in detail drawings & as per instructions of architect/consultant / in

charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks.

includinf of vertical supports & horizontal shelves shown as per drawing

made by 19 mm thick Marin ply, having shutters of 19 mm thick ply or

Clear Glass with using 12 mm thick Marin ply for framing. All complete with

proper teakwood beading. and Teakwood molding as per design. Back ply is

247 12 mm Marin ply. All exposed are covered with 1 mm thick Laminate & Sqm 41.00 13,815.77

internal surfaces are covered with 1 mm thick laminate. External & internal

joints covered with beading Patti complete with Polish finish. With grooves

shown as per drawing All complete with proper hardware like locks, S.S.

Screws, MS Nails, Magnets, table chains, cable manager SS 304 Handles of

250 mm and 100 mm dia etc. All Details as per shown in detail drawings &

as per instructions of architect/consultant / in charge engineer

Notice Board / Pin Board

248 Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Nos 4.00 7,259.38

Arrangement complete as per drawing and Directed by Engineer In Charge

etc complete.

Providing and fixing News paper stand size 650 x 820 x 1200 or required

height made out of 18 mm wtr.prf. [MR Grade] ply with 1 mm. thk inner

laminate for top including back panel with shelves for magazine and news

249 paper as shown in drawing, all expose joints finish with teakwood beadsing Nos 2.00 13,044.62

patti with polish finish and provision of openable top for news paper

storage complete as per detailed drawings and Engineer-In Charge and

Supplying and providing reading chairs with PP arms with soft PU pads, Seat

and back upholstered with cushioned and MS powder coated frame and

250 cantilever legs. Overall dimension 590 L x 600 W x 915 H (Or as specified) Nos 91.00 6,060.00

complete as directed by architect and product as per given specification.

Complete as per architectural design and concept and approved by Architect

Supplying and providing High Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest

251 -Knee tilt mechanism Nos 1.00 10,738.07

-360 swivel motion/ 100mm stroke gas

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

252 -100mm class 4 gas lift Nos 8.00 5,024.65

-PP Fixed Arm rest

-Nylon Star base/Twin wheel nylons casters

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with paddle.

Capacity-10 to 15 Ltr.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying and providing dust bin made of 100% virgin plastic with paddle.

Capacity-120 L

Blinds : Providing and fixing as per approved make manual roller blinds

with Soltis fabric & spring drive system with steel ball chain/one touch with

speed control action roller blind with end brackets with head ail,

components, bottom bar.Color-Alu with manual operation and warranty etc

as per manufacturer’s specifications. Fabric to be as per approved sample.

All the work complete as per the detailed drawing and instruction of

Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC with

Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm, Openness

255 Factor:3%, Visible Light Transmission (N-N): 2%-4%, Solar reflection (white) Sqm 115.00 1,962.94

65%, Internal Solar Factor (gtot): 0.35 - 0.48, Tensile Strength

(Warp/Weft):160/170daN/5cm,Tearing Strength(Warp/Weft):11/13daN,

Fungi static Treatment: Degree 0, Excellent (EN ISO 846-A) Fire Retardancy:B-

s2,d0/EN 13501-1. All complete as per approval of designer & instruction

of Project Manager. (The mode of Measurement: The size of the blind will be

measured from end to end bracket (Left to Right bracket) & height will be

measured from top of the pelmet till the bottom of the bottom bar

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with

256 proportionately base dimenstion as per approved design by client and Nos 1.00 1,50,995.00

complete as per instruction of engineer-in charge and consultant.

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden frame

257 of size 2in x 1in consisting 6mm thick ply in back with digital vinyl printing Nos 30.00 2,497.23

and 5mm thick glass on top if required.

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 x

258 2160 pixels with HDR TypeHDR 10+ complete as per approved make and as Nos 1.00 1,02,067.57

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb RAM

259 DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE 2021 STUDENT, Nos 8.00 59,748.35

Full HD display of 21 to 23.8' with keyboard and mouse.

Providing and fixing Automatic Duplex laser printer with 30 pages per

260 minute print speed, 8 mb memory, Large 250 sheet paper tray with USB Nos 1.00 15,157.58

connectivity.

Supplying and providing xerox machine- -20PPM Copy / Print /Color Scan /

261 Duplex DADF /Single Nos 1.00 58,075.00

Providing and fixing Directional and Informative Signages- SS Plate, Grade

262 304, Brush finish, 2mm Thickness with smoothen corner edges, Acid Sqm 1.50 92,433.18

etching with duco color, SS studs 1.5' away from wall.fitting as per dirction

of Architect and EIC

Providing and Fixing Library Name in Gujarati Letter SS304 1mm thick letter

263 1.5" depth 10" Height with Duco color & fitting as per direction of Architect Nos 1.00 52,520.00

Total Amount Rs. =

Total Amount Rs. =

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as

Estimated amount put to tender Estimated amount put to tender

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by

1 the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal