CERTAIN REPAIR TO SEWAGE LINE MANHOLE SEPTIC TANKS CLEANING OF SEWAGE LINE TO MD OTM ACCN AT 147 AD 915 WKSP SARVATRA NAGAR SIG COMPANY MD OTM ACCN OF ODTD SHIVAJI ENCLAVE AND UNIT 495 UNDER AGE BR WEST AT GE DEHU ROAD

Amount

Dewatering of Man holes, septic tanks of various capacity and sizes including disludging of sludge at bottom in foul condition including taking out other dirty and filth materials from manhole and septik tanks by using electric sewage pumps and removing outside MD landupto 5 Km distance including burrying etc complete all as specified and as directed by Engineer-in-Charge.

Manhole of any dimension upto 1.5 m deep

Manhole of any dimension exc 1.5 m but n exc 3.00 m deep

Septic tank upto 10 User capacity

Septic tank upto 50 User capacity

Septic tank exc 50 but n exc 100 User capacity

Septic tank exc 100 but n exc 200 User capacity

Cleaning of SWG/RCC Sewage line of 150mm bore dia of pipe of foul condition by rodding the drain/sewage line using flexible rod/suitable device or by any other means for removing blockage from sewer line, mud, silt and any other debries obtained from sewage line with water to remove blockage and cleaning the entire rubbish, sludge etc and burrying the material obtained from sewage line including all precautionary and safety measures etc complete all as specified and directed.

All as per item No. 02 above for 200 mm dia pipe complete all as specified and directed by Engineer-in-Charge.

Removing blockage from water closet, floor or gully or Nahani Trap traps and bends by rodding thoroughly and pouring water under pressure and Cleaning, clearing the drainage to efficient and Smooth flow of sludge/waste water all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced )as in manholes cover complete all as specified and directed by Engineer-in-Charge.

M&L for precast cement conrete (1:2:4) type B-1 (20mm graded stone agg) as in cover slabs for man holes, set and jointed in CM (1:4) complete all as specified and directed Note:- Reinforcement shall be measured and paid separately.

M&L for mild steel TMT bars 6 to 8 mm and over dia cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars etc , precast concrete articles and precast concrete block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surface incl mixing of water proofing compound finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge (Note:-WPC shall be measured and paid separately

S&F in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches or in floor, bore of pipe 110 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) branch piece (Single Y) equal or unequal complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) branch piece double, (Double Y) equal or unequal complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches or in floor, bore of pipe 75 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) bends any radius, 75mm dia pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal,for 75mm dia pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) branch piece, double (double Y), equal or unequal,for 75mm dia pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 150 mm dia pipes, all as specified and directed by Engineer-in-Charge.

All as item No. 22 above but for internal dia of pipe 200mm dia complete all as specified and directed .

M&L for reinforced cement concrete pipes class NP-2 , laid in trenches & jointed complete with collars, dia of pipe 150 mm complete all as specified and directed by Engineer-in-Charge.

All as item No. 24 above but for 200 mm dia of pipe complete all as specified and directed by Engineer-in-Charge.

M&L concrete bed to drain pipe of 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate complete all as specified and as directed by engineer-in-Charge

All as item No. 26 above but for 200 mm dia RCC pipe.

Supply and fix in repair hume pipe septic tank 10 users capacity inclding all excavation earth work required and demolition and removal of old septic tank (any size) and removal of debris and connecting the new septic tank to the incoming sewer lines and connectd to soak pit as directed.

Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including 25 mm thick sand cushion complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced.

S&F in repairs vitreous china squating pan Orissa pattern of size 580x440 mm white with integral foot rest (excluding flushing cistern and flush pipe) all as specified and as directed by Enginner-in-Charge

S&F vitreous china premium / 1st quality wash down water closet EWC white/ivory/off white incl all necessary accessories (excluding flushing cistern and flush pipe) all as specified and as directed by Enginner-in-Charge

S&F in repairs 10 ltr capacity PVC valve less syphonic action type flushing cistern low level, white with inlet ball valve, float and handle including necessary brackets & screws, flush pipe as required complete all as specified and directed.

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed..

S&F in repair brass chromium plated bottle traps 32 mm dia for wash basin with inlet and outlet screwed for pipe or connection including necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repairs Pillar taps fancy type chromium plated with capstan heads, crewed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and directed .

S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs CP fancy type bib cock twoway double handle with flange. Make Prayag Cat Part No 6812 complete all as specified

Supply only liquid water proofing compund

Dismantling/ taking down AC waste / vent pipes fixed to walls with all fittings/ accessories 100 mm dia pipes all as specified and directed by Engineer-in-Charge

S&F in repair bib tap 15mm dia fancy type with long body all as specified and as directed by Engineer-in-Charge

H S TAKHI

Star Construction

Dinesh Constructions

KARPE AND SONS CONSTRUCTION

M/S VR KRNCH