Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹42.2 L+₹6.9 L (19.6%)Rejected-Finance 2076 2077 CHIRIMAR MOHALLA AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹43.0 L+₹7.7 L (21.9%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Other Than Lowest Bidder | |
| 4 | L4₹45.4 L+₹10.1 L (28.7%)Rejected-Finance 94 5TH FLOOR TOWER D SPENGLE HEIGHTS DHAKOLI KC ZIRAKPUR TEH DERABASSI SAS NAGAR MOHALI PB | S A S NAGAR | PUNJAB | 140103 | L4 | Rejected-Finance Other Than Lowest Bidder | |
| 5 | L5₹47.0 L+₹11.7 L (33.3%)Rejected-Finance 1106 SECTOR 29B CHANDIGARH 160002 | CHANDIGARH | CHANDIGARH | 160002 | L5 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹49.5 L
EMD Value
₹98,900
Closing Date
24 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
SPL REPAIR TO 06 OR/MD ACCN (192/1 TO 192/6) INCLUDING CERTAIN SANCTIONED REVENUE AND MINOR WORKS AT N AREA UNDER GE CHANDIGARH
2023_MES_611211_1
GE/CHD-42/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹98,900
Yes
20 Oct 2023
28 Jul 2023
26 Aug 2023
28 Jul 2023
24 Aug 2023
12 Aug 2023
28 Jul 2023 - 7 Aug 2023
Amount
Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Demolition of RCC of any description and in any position not otherwise specially provided for sunken floor complete all as specified and directed.
Demolition & breaking of AC rain water 100mm dia set in cement mortar & removing from site completed all as specified & directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar complete all as specified.
M&L 75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, as in plinth protection, complete all as specified and as directed.
M&L for providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in mass concrete etc., complete all as specified and as directed.
M&L reinforced cement concrete, type A-1 (1:1½:3), using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, chajja, drilling, weilding in old steel, roofs, landings, balconies, canopies, deck slabs and in shelves etc including fromwork to sides and soffits of floor /slab etc complete all as specified.
Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall etc. by electric drilling machine and making good complete all as specified.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. for concealed water tubing, etc., and making good, cutting not exceeding 10 cm in girth, in brick walls, complete all as specified.
Brick work with sub class 'B' bricks, class Designation 10 straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L brickwork with subclass ‘B’ bricks, class Designation 10 straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified.
All as per item no.10 above but except bricks.
Supply and fix 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats including one shop coat of primer complete all as specified and directed.
Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated as per SSR Part-1 including one shop coat of primer complete all as specified and directed.
Supply and fixing factory made single extruded WPC (wood polymer composite) solid decorative type flush shutter for cupboard of size 25mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powser/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650Kg/cum and screw withdrawal streangth of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850N/mm2 and resisitance to spread of flame of class A category with resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant.WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star haeded counter shunk S.S. screws, all as per direction of Engg-In-charge. Note: stainless steel butt hinges and necessary SS screws shall be paid separately
S&F 2nd class hardwood Boarding, 25mm thick plane one side fix with nails for cupboard shelves complete all as specified and directed.
Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.
Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified.
Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame),complete all as specified.
Taking down shutters of any description not exceeding 1 Sq. m each, complete all as specified.
Taking down shutters of any description exc 1sqm but not exceeding 2 Sq. m each, complete all as specified.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, complete all as specified.
S&F for factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,as per specification in SSR part-I complete all as specified and as directed.
S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.
S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 125 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.
S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.
S&F Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 300 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
S&F Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
S&F Aluminium handles, cast type anodized of size 125 mm, ISI marked, complete all as specified.
S&F Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed with standard aluminium screws complete all as specified.
M&L Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified.
S&F Drapery rod (conduit) of dia not less than 25 mm having a corrugated virgin PVC extrusion on it and ABS plastic rings & finials of approved shade with standard MS powder coated brackets, fixed to walls with rawl plugs and steel screws complete all as specified.
Supply and fix mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-410-O or Fe-310-O all as specified and directed.
Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Mild steel TMT bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/zinc chrome primer, IN REPAIRS, including Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/ zinc chrome primer, IN REPAIRS, including cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified.
M&L for factory made steel windows (Box type), fixed type, Ventilator dovetailed or welded etc., including one shop coat of red oxide/ zinc chrome primer, fixed as IN REPAIR including Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified.
S&F factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified.
S&F factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified.
Demolition of cement concret/ lime concrete/brick bates of any description and in any thick , any position not otherwise specifically provided for including chaina mozaic, WC etc complete all as specified and as directed.
M&L cement concrete 1:7:12 using 40mm graded aggregate in sunken floor all as specified and directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
M&L for concretein foundations, filling and mass concrete 1:4:8 type D-2 (using 20m graded crushed stone aggregate) as in sub base, foundations, filling and mass concrete etc, complete all as specified and directed.
M&L 15mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:4), using water proofing compound complete all as specified and directed.(WPC shall be measured and paid seperately).
M&L for providing and laying 3mm thick APP modified polymer reinforced water proofing membrane with minimum weight of 3.60kg/sqm including appliying bitumenous primer @ 0.30 litre per sqm over cleaned and dry roof surface and parapet, The APP membrane shall be laid using torch application with minimum 10cm side overlap and 15cm end overlap and shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant & The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet complete all as specified and directed.
M&L for 300mmX300mmX 7 to 8mm thick cool roof/ temp sheilds tile as in terraces, roofs pavment as in horizontal and slant and stair vertical surface white in colour set and jointed in neet cement slury and pointed in white or colour of tile over and including screed bed or beding layer 15mm cement mortar (1:6) complete all as specified and directed.
Cuttiing groove in parapet wall 75mm wide and 65mm deep and making good in CM 1:3 after inserting the APP membrane complete all as specified and directed
M&L Providing, cement concrete B0 1:2:4 (12.5mm gaded aggegate) in roof kerbs, roof padding or mud stops, rounded or chamfered on edges all as specified.
Excavating in trenches in soft/loose soil, n.exc. 1.5m wide and n.exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified and directed
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm complete all as specified and directed
Removing excavated spoil to a distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.
Supply only water proofing compound, complete all as specified.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.led in any mortar all as specified and directed.
M&L for 16 to 18 mm thick green marble machine cut stone slab (table rubbed polished) as in flooring & riser setted and jointed with cement slurry and bedded over & including 20mm thick cement sand mortar (1:4), & pointed with white/ coloured cement including cutting, grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.
M&L for 16 to 18 mm thick green marble machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 10mm thick cement sand mortar (1:4), & pointed with white/ coloured cement including cutting, grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.
M&L Machine cut Granite (of any type) 16-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in cooking platfrom, window cill, step & riser etc. complete (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with matching shade pigment including rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed.
M & L Glazed ceramic coloured tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement, laid in pattern with two or more colured tile including rendering 10 mm thick in cement mortar 1:4 all as directed.
M&L for Non skid, Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exc 0.18sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with shade of tiles as directed by Engr-In-charge.
M&L for Non skid, Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles as directed by Engr-In-charge.
Material & labour for 25mm thick PCC (1:2:4) type BO (using 12.5 mm graded stone aggregate), as in floor finished even & rough surface complete all as specified & directed.
M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in subbase of floor complete all as specified and directed.
Material & labour for 60mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over & including 20 mm thick cement mortar (1:4) screed, set, jointed and pointed with grey cement slurry over complete all as specified and directed.The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.
S&F endora tile good grip series 300X300X8-10mm thick consinehas of colour set in neet cement slury on 15mm thick screed bed in CM 1:6 and pointed with pigment complet all as specified and directed.
S&F 8 mm PVC board (1st qualty), one side decorative other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets, cupboards etc complete all as specified.
S&F 18/19 mm PVC board (1st qualty), one side decorative other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets, cupboards etc complete all as specified and as directed.
S&F stainless steel cutlery pan basket or any other basket of any description/pattern as approved be GE, fixed with sliding channel, revolving wheels, fixed to wood based frame work, fixed in repairs, complete all as specified and directed.
S&F Stainless steel handle, fancy type, 125 mm size and fixed in position with stainless steel screws, ISI marked, suitable for shutter drawer(s), complete as per the sample kept in the office of Engineer-in-Charge.
S&F Stainless steel auto close (dada) hinges suitable for PVC moulded shutter fixed in position with stainless steel screws, complete all as specified and directed.
S&F Stainless steel telescopic channel 400-500 mm long and fixed in position with stainless steel screws, ISI marked, suitable for cupboard drawers, complete as per the sample kept in the office of Engineer-in-Charge.
S&F in repair 50mm long magnatic catchers superior quality and fixed with screwscomplete all as specified and directed.
M&L for retrofitting by using hilti hammer drill with carbide drill bit, Chomical dispensing gun for inserting RE-500V3 Chemical upto minimum depth of (10X dia of bar) as in chajah, beam, lintel, columns slab and parapet at any height Before inserting an an anchor/bar, hole must be free from dust debris, water ice and oil grease etc by using Dia of bar 10mm complete all as per manufacture instructions. Note:- (i) Reinforcement will be measured and paid separtely. (ii) Rates are inclusive of from work shuttering and safely measures.
All as per item no. 74 above but dia of TMT bar 12mm
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified.
M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), including taking down cement plaster complete all as specified.
M&L rendering 15mm thick internal wall surface on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified.
M&L rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), including taking down cement plaster complete all as specified complete all as specified.
M&L for applying two coats of weather coat exterior paint in new externel wall surface over one coat of primer coat of damp shealth to plastered wall as per manufacture instrcution including properly filling the cracks with putty complete all as specified.
M&L for complete removal of existing treatment and applying two coat of weather coat paint internal/externel wall surface over one coat of primer coats of damp shealth to old plastered wall as per manufacture isstrcution including properly filling the cracks with putty complete all as specified.
M&L preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper(distemper oil emultion) including chalk whiting, complte all as specified.
M&L preparation of newly plastered surfaces of ceiling and applying three coats of white washing on new ceiling/chajja surfaces complete all as specified.
M&L two coats of synthetic enamel paint over old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.
M&L two coats of synthetic enamel paint over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.
M&L two coats of synthetic enamel paint over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces
M&L two coats of synthetic enamel paint over old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces
M&L for two coats of oil bond distempering on old wall surface including 1mm wall care putty and preparation of surface, after complete removal of existing treatment all as specified.
M&L for two coats of white washing on wall surface including chalk whiting, preparation fo surfaces complete all as specified.
Complete removal of existing treatment from internal surfaces on walls by wire brushes & stopping of surfaces & leveling/ edging the disturbed places/edges using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper, complete all as specified and directed .
S&F for plain Sheet glass 4 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. mm in each pane complete all as specified.
S&F for Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified.
M&L tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.
S&F tubes 20 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.
S&F tubes 15 mm bore, ‘medium grade’, galvanized with all fittings (Except pipe) and fixed complete to walls and ceilings or laid in floors, complete all as specified.
S&F tubes 20 mm bore, ‘medium grade’, galvanized with all fittings (Except pipe) and fixed complete to walls and ceilings or laid in floors complete all as specified.
Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.
Dismantling of water tank of capacity exc. 500 & n.exc. 1000 ltrs and removing to store complete all as specified.
S&F in repairs 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (triple layered cylindrical vertical with closed top) hoisted and fixed in position all as specified.
S&F Ball valves, high pressure PTMT with epoxy coated polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified.
S&F GI tank nipple suitable for HDPE for water storage tank of size 20 mm bore in repair complete all as specified.
S&F Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 15 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified.
S&F Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified .
S&F for CP soap dish holder in repair of complete all as specified and as directed.
S&F for stop valves/angle valve, fancy type, chromium plated 15mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified.
S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe, IN REPAIR complete all as specified.
S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down, suitable for 15 mm bore pipe, IN REPAIR complete all as specified.
S&F Consealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR. complete all as specified.
Supply & fix in repairs Cast copper alloy, chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.
S&F for Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, screwed for iron pipe and fixed suitable for 15 mm bore pipe, IN REPAIR, complete all as specified.
S&F 15 mm CP Pillar cock long neck, cast copper alloy, chromium plated fancy type , with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe and fixed in repairs, complete all as specified.
S&F Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) IN REPAIR, complete all as specified.
S&F PVC waste pipe 80 cm long suitable for 32 mm dia waste coupling, IN REPAIR, complete all as specified.
S&F Swivel shower of CP with shower arm 15mm size,195 mm long with bend of 45 degree with flange for fixing with 15mm pipe IN REPAIR, complete all as specified.
S&F PTMT Shelf 150 mm x 600 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) IN REPAIR, complete all as specified.
S&F 5mm thick corner glass shelf of radius 300, metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm IN REPAIR, complete all as specified.
S&F Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI pipe IN REPAIR, complete all as specified.
S&F grating doom 125mm dia with waste hole of CP (Minimum weight 25gms) complete all as specified and directed.
S&F chromium plated health fucet suitable for 15mm bore pipe with hook, including suitable length of PVC connection pipe , fixed in repair complete all as specified and as directed.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) as IN REPAIR, complete all as specified.
S&F Steel tubular section of any size and shape truss/ purline etc including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.
S&F Kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and waste coupling; including bedding in cement mortar & providing cantilever brackets and waste pipe, overall size 940mm x 460mm & bowl size 405mm x 354mm x 178mm, IN REPAIR, complete all as specified.
S&F Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories,of size 600mm x 600mm x 250mm, IN REPAIR, complete all as specified.
Supply & fix in repairs squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.
S&F 10 ltr capacity PVC flushing cistern syphonic action type white dual flush ISI (IS 7231) marked including ball and float valve with flush pipe in repair complete with all fixing arrangements complete all as specified and directed.
S&F Vitreous China wash basin with pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, IN REPAIR, complete all as specified and directed.
S&F for 110mm dia PVC (SWR) pipe, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.
S&F for 110mm dia PVC (SWR) pipe, ISI Marked laid in trenches set in cement mortar complete all as specified and directed.
S&F for 75mm dia PVC (SWR) pipe, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.
S&F Low density polythene pipes of dia 50mm bore (LDPE) of pressure rating fixed complete to walls, ceiling or in floor etc. complete all as specified.
Form work to sides and soffits of floor roof beams, beam haunching , girders, bressummers lintels, cantilevers, shelves including sup-ports, edges, over hangs, etc also splays between floors and beams , etc complete all as specified and directed.
Supply and fixing PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed.
Supply and fixing PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.
Supply and fixing PVC tee plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi corrugated,etc ) sheets in roof covering complete all as specified and directed by Engr -in charge.
S & F for pre- painted galvaLume aluminum zinc coating GI based corrugated steel sheet in roofing 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified and directed by Engr-in-Charge. Note: Colour of sheet shall be decided by GE at the time of execution.
S & F for pre- painted galvatume aluminum zinc coating GI based plain steel sheet as in Ridge 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified and directed by Engr-in-Charge. Note: Colour of sheet shall be decided by GE at the time of execution.
Dismantling timber scantlings for framed work 40 sq. cm and over in section, in any position comlete all as specified and directed
Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slab/blankets, any thickness, including cover fillets and removal from site complate all as specified and directed.
M&L for providing and fixing Gypsum board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx12mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directed
M&L for machine cut kota stone slab flooring 16-18mm thick over and including 15mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting,grinding, rubbing and mirror polishing complete all as specified and as directed.
M&L for machine cut kota stone slab 16-18mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with neat cement slurry over 10mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with complete all as specified including cutting,grinding, rubbing and mirror polishing as directed by Engineer-in-Charge.
M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished) complete all as specified and directed.
M&L for factory made Precast RCC manhole covers with frame (type A-1, 1:1½:3, using 20 mm graded stone aggregates), of size 750mm x 750mm x 75mm with plain faces, including 70x3mm ms flat all around, set in cement mortar 1:4 complete all as specified.
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified.
M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed
M&L for providing reinforced concrete pipes , claps NP2 laid and jointed complete with collars 150 mm dia (internal) laid in trenches & jointed etc all as specified and directed by Engr-in-Charge
M&L Construction of septic tank for 25 users as per drawing No : STD-1320 (C) sheet 1/3 to 3/3 of CE Chd zone complete all as specified and as directed by Engg-In-Charge.
M&L construction of soakage wells of 3.0m dia & 6m effective depth as per drawing No : STD 1173 (C) of CE Chd zone sheet 1R/2 to 2R/2 complete all as specified and by Engr-in-Charge.
M&L for Point wiring with 1.5Sqmm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable PVC insulated unseathed FRLS dolly in existing concealed/surface conduit incl modular MS Box, 1.6mm thick with modular cover plate with frame as required at site suitable for modular switch, socket, fan regulator, bell push, two way etc for One light/ceiling fan/exhaust fan/bell point controlled by one switch. NOTE : (i) Modular switch socket fan regulator shall be measured and paid separately under respective items. (ii) Cost of mudular MS Box, codular cover plate an frame of any modules as required at site and as directed by engineer-in-charge is deemed to be included in the quoted rates.
All as per Item No 153 but above one socket 5 Amp point Independent board.
All as per Item No 153 but above one socket 5 amp on Same board.
All as per Item No 153 but above wiring with 4 Sqmm for 15 Amp socket outlet point on independent.
Taking down Copper point wiring ( light, fan, socket, or power ) complete, incl fixture and fitting such as switches, ceiling roses, pendants, regulators sockets, light fittings etc. removing materials to store for keeping in safe custody or for making credit and making good disturbed surfaces of walls, floors etc. complete all as specified.
S&F ceiling rose surface bakelite 65x50mm three terminals complete all as specified ISI marked.
Supply and replacement of socket 3 pin 5 Amp and 3 pin 15 Amps flush type (ISI marked), complete all as specified.
Supply and replacement of switch piano 15 Amps single pole, AC, 230V flush type ISI marked.
Supply and replacement of socket 5 pin 5 Amp flush type (ISI marked), complete all as specified.
Supply and replacement of switch piano 5 Amps single pole, AC, 230V flush type ISI marked.
S&F bell push 5 Amp flush type.
M&L for sub main wiring in replacement (with approved colour coding as per IS) with single core 6Sqmm FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade ( two runs of main cable) alongwith one run of single core 4sqmm FRLS PVC insulated flexible stranded copper donductor 1.1 KV grade for earthing drawn in suitable sized PVC casing caping complete all as specified and directed. Note: for payment purpose 2 runs of 6Sqmm cable + one run of 4Sqmm cable shall be considered as one Rm
S&F LED Recess mounting downlight 2x2 ft decorative type of 15W natural WHITE light and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as directed by Engr in charge.
S&F as in repair LED tube light 1X20 watts LED, 230Volt energy saving recess, industrial batton type, powder coated, CRC Sheet complete with all as accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Complete all as specified and as directed by Engineer in Charge.
Supply and Fixing lamp holder, angular type,(With lamp 9 watts ) PVC/ polycarbonate with back plate of capacity 5 Amps 230 volts suitabel for general lighting system complete all as specified and as directed.
M&L bell electrical ding dong 5 Amp 230 volt.
Taking down and replacement of factory made sheet metal enclosure for distribution board double door type (Fixed to the wall), single pole and netural with 200 Amp rated bus bar, 8 way suitable for having MCB’s complete all as specified.
S&F MCB Isolator of rating 240 volts, SPN, 40 Amps with breaking capacity 10 KA incl taking down complete all as specified.
S&F in repair MCB, SP, 240V, 5 to 32 Amps with breaking capacity 10 KA incl taking down complete all as specified.
M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 3 of SSR (Part-I) and testing on completion, complete all as specified and directed.
S&F Fan regulator & Dimmer Fan step regulator 120 volt / 280 volt single phase ISI marked.
S&F street light bracket made out of 32mm dia, 1.50 mtr long GI tubing, "medium grade" ISI marked, bent to required shape and angle as per site requirement with and including MS clamps size 30X6mm, with nuts, bolts, washers etc for fixing street light fittings and bracket, duly painted with two coats of aluminium paint over a coat of red oxide primer including taking out existing unserviceable rusted GI bracket complete all as specified and as directed.
S&FSupply and fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmnagement in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
M/s REEDIT CONSTRUCTION
M/s Super Trading Corporation
Satyadev Builders
MANDEEP ENTERPRISES
M/s Nuway Constructors India Pvt. Ltd.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .