SPL REPAIR TO BLDG NO.P-141F (STAFF QTRS) AT 14 DOGRA IN GHUNGHORA UNDER GE DEHRADUN

Amount

Demolition of brick work or stone masonry/stone slabs built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed.

Taking down cement plaster, from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 finished to even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of exterior emulsion paint over a coat of exterior primer of same make complete all as specified and directed.

M&L for preparation of newly plastered surface of internal wall by application of 1.5mm wall care putty to make the surface even and smooth complete all as specified and directed.

M&L for preparation of newly puttyed/plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.

S&F Pressed steel frames of size 105x65 mm for doors made out of 1.25mm thick mild steel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc frame filled with and including cement concrete1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

S&F Pressed steel frames of size 125x65 mm for doors made out of 1.25mm thick mild steel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc frame filled with and including cement concrete1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

M&L 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1), kiln seasoned and chemically pressure treated, all as specified and directed.

S&F IInd class hard wood, 35mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E 165 includind dismantling existing mild steelwork in any position, complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company. The door should be water proof termite proof fire retardant and having good screw holding capacity complete all as specified and directed. Make:ECHON/Kumar Tech/TVL Engineers Ltd (Floresta)/Rajshree

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed. Make:ECHON/Kumar Tech/TVL Engineers Ltd (Floresta)/Rajshree

S&F of powder coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glass fixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm complete including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed by Engineer in Charge. (ii) Cost of glass and gauge shall be included in the quoted rate.

S&F in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm, Shutter verticle style :- 85x44.45x1.56mm Shutter middle Rail :- 83.50x44.45x1.54mm, Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm

S&F powder coated aluminium partition (Fixed) made out of aluminium powder coated section 83.00 x 44.45 x 2.mm including 5 mm thick glass/ACP Sheet complete with aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type if directed, rubber packing/aluminum beading etc, including dismantling of existing structure complete all as specified and directed.

S&F in repair aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm complete all as specified and directed.

S&F Stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and ditected.

S&F sheet glass ordinary quality 5.mm thick and glazing with silicon, oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane complete all as specified and directed.

S&F stainless steel barrel tower bolt 150mm long of extruded section complete all as specified and directed.

S&F stainless steel butt hinges 100mm long medium weight complete all as specified and directed.

S&F stainless steel handle 125mm long complete all as specified and directed.

S&F stainless steel sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F in repair of 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 580 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness both side plain consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 580 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.

S&F magnetic catcher and striking plate including letting complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open), 30 mm complete all as specified and directed

M & L for preparation of old treated steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile exc.0.11sqm but not exc 0.18 Sqm laid over and including 15mm thick screed bed in CM (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 450x300x7mm in vertical surfaces such as dado/skirting etc fixed over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile complete all as specified and directed.

M&L for Vitrified coloured tiles 9-10mm thick dark shade/double charged (square/rectangular) area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No.41 above but as in skirting/dado fixed over and including 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L for 18-20mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm width in brick wall complete all as specified & directed.

S&F GI tubing 15mm bore, medium grade with all fittings fixed to walls and ceiling or laid in floor including taking up or down steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified & directed.

S&F GI tubing 20mm bore, medium grade with all fittings fixed to walls and ceiling or laid in floor including taking up or down steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified & directed.

S&F in repair 75mm bore UPVC (SWR) pipes pressure 4kgf/cm2, single socketed in any length with rubber ring joints laid in trenches/ floors/fixed to wall complete all as specified and directed.

S&F in repair 110mm bore UPVC (SWR) pipes pressure 4kgf/cm2, single socketed in any length with rubber ring joints laid in trenches/ floors/fixed to wall complete all as specified and directed.

S&Fin repair PVC bend of radius 75mm bore with access door complete all as specified and directed.

S&F in repair UPVC bend of radius 110mm bore with access door complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including CI brackets, waste pipe, 32mm dia CP brass waste coupling cutting for pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan head, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white seat cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all as specified and directed.

S&F in repair vitreous china squatting pan orissa pattern long pan size 580 mm x440mm white, front or back inlet with integral foot rests and CI 'P' trap excluding flushing cistern & flush pipe but including cement concrete bedding and making good floor and connection complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed

S&F in repair CP overhead shower of 100 dia with shower arm including fixing to steel pipe or union complete all as specified and directed

S&F in repair angle/ stop valve cast copper alloy screwed down high presure screwed both end for iron pipe 15 mm dia fancy type cromium plated complete all as specified and directed.

S&F PVC connection 15mm size with brass nut, 450mm long and fixed complete all as specified and directed.

S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair health faucet (ABS Body) suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections fixed in position complete in all respect as specified and directed.

S&F in repair CP Grating 100/125mm dia with/without waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed.

S&F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

S&F in repair brass chromium plated towel ring complete all as specified and directed.

S&F in repair 20 mm dia stainless steel 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends and curtain rings 8 nos minimum complete all as speccified and directed.

S&F PVC water storage tank cylindrical, triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 1000 Ltr including dismantling of old water tank and removing from site complete all as specified and directed.

S&F in repair 75 mm bore out let cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed.

S&F ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.

M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortarand making good dismantled portion in cement 1:3 or cement concrete 1:2:4 Type B-1 as required Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall ) Exceeding half brick but not exc. One brick complete as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection/hard standing surface finished even and smooth without using extra cement complete all as specified and directed. .

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in window or door cill, lintel, benching to drain, holdfast, coping, bed block, posts, boundary pillars, bonders etc. and the like edge slightly rounded or chamfered angles and throating including necessary form work and demolition of existing cement concrete in any position complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) including dismantling of existing tiles including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L for stainless steel Grade-304 framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars, ladders, frame balusters, walk ways, railing and similar works confirming to relevant IS codes complete as specified and directed.

Dismantling of disstressed concrete by chiseling from RCC members (Beam, column, Slab, Chajja, facia, Wall, etc) and exposing the reinforcement without disturbing the core of RCC member and cleaning the surface with wire brushing including cleaning the reinforcement free from rust by sand blasting and reinforcing the surface with 100 mm x 100 mm x 3 mm welded mesh and anchoring it with 1.35 m centre to centre and cleaning the surface with water under compressed air pressure and Guiniting pressure @ 20-30 N/SqCm with Admixture (One part of cement and 3.5 part of sand) of thickness 40 mm average incl stripping, floating with wooden strippers for proper dimension,welded steel wire fabric of mesh size 100 mm x 100 mm x 3 mm. and necessary form work, scaffolding & removing of waste material etc all as directed by Engineer in Charge at Site. Note: (i) All precautionary measures shall be taken to avoid damage of existing structure otherwise contractor shall be responsible to make good of the existing structure at his own cost.(ii): The work will be carried out upto double storey builing the rate of scafolding deemed to be included in quoted rates for this item.

M&L for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed. Note : The work of water proofing treatment shall be got executed thorugh manufacturer or authorised applicator only.

M&L for 50mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone agg in floor, bedding layer over roof slab laid in alternate bays, etc and finished the top surface of concete by brooming complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed .

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc10 sqm on plan and laying of cable and getting out excavated soil/sand/unserviceable LT cable and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm inany type of soil. complete all as specified and directed.

Removing excavated material n. exc 50m & depositing where directed at a level n.exc.1.5m above the starting point.complete all as specified and directed.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM 1:1, complete all as specified and directed.

M&L for in PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in cover slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed.

M&L for mild steel TMT bars 6 to8mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down carefully copper aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose, lamp holder and regulator, light fitting etc and removing from site and making good to any disturbed surfaces of walls floors etc. as per existing specification complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed drawn through and including concealed PVC conduit non metalic medium duty 20mm or higher dia including factory made MS pressed metal flush box with zinc coated duly concealed in wall of thickness 1.2mm incl polycarbonate frame for housing modular switches, sockets, fan regulator etc. incl 3mm thick hylum sheet cover plates of suitable size/module as required at site and 1.5sqmm single core FRLS, PVC insulated 1100 volts, grade multi stranded unsheathed copper conductor cable, green colour as earth wire up to common earth and connected to earth dolly inluding cutting chases for conduits and sunken boxes including taking down existingunserviceable copper/aluminium point wiring (light, fan, socket or power etc) including fixture and fitting such as switches, ceiling rose, pandents, regulators, sockets, light fittings etc and removing from site and making good disturbed surface of wall, floors etc as per existing compete all as specified and directed by Eng.-in-charge. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

One light/fan point controlled by one-one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No.89 above but one 3 pin, 15 Amp socket outlet on independent board with cable 2.5 Sq mm PVC insulated FRLS copper conductor and earth continuity copper coductor of size 2.5 Sq mm FRLS complete all as specified and directed.

S&F step type, fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts complete all as specified and directed

S&F switch piano flush, button type, single pole, 5 Amp, 250 volts all as specified and directed.

S&F switch piano flush, button type, single pole, 15 Amp, 250 volts all as specified and directed.

S&F socket outlet two in one 3 pin 5 Amp and 15 Amp flush type 250 volts all as specified and directed.

S&F socket outlet multipurpose 3 pin 5 Amp and 2 pin 5 Amp 250 volts all as specified and directed.

S&F ceiling rose, surface bakelite 3 terminal suitable for batten fitting complete all as specified and directed.

S&F lamp holder insulated body with back platesuitable for angle and batten fittings including 9w LED bulb complete all as specified & directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLS copper conductor multistranded of size 10.0Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 10.0 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain and making good disturbed surface complete all as specified & directed. Note:-3 runs of 10 Sqmm cable and one run of PVC conduit shall be measured as one unit length.

S&F distribution board SPN 8 Way double door, 240volt with 200 amp rated bus bar IP-43 IK 09 metal door suitable for mounting 1 MCB SPN as incoming and 06 MCBs for out going, fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and directed .

S&F MCB SPN 240 Volt 10 KA, 40 Amp, 'B' curve complete all as specified and directed.

S&F MCB SP 240 volt 10 KA, 5-32 Amp, 'B' curve complete all as specified & directed.

S&F wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement BLDC ceiling fan 1200 mm sweep, BEE 5 star rated, AC single Phase 230 V / 240V 50 Hz, connecting up ceiling rose to connector block of fan with twisted three core flexible copper cable 23/0.0076 including taking down old unserviceable fan and depositing in MES store yard complete all as specified and directed.

S&F in replacement air ventilation fan made of sturdy engineering plastic body 250mm, 1200 RPM, single phase, 230V AC including necessary making hole fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge. Note: old unserviveable fan shall be deposite in E/M yard.

S&F in replacement electric water heater, storage type metal body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. Note: old unserviveable geyser shall be deposite in E/M yard.

Supply and Fixing Integral LED Bldg Security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours incl taking out old u/s fitting complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C-1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.

M&L for sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

M&L for brick well burnt Class ‘B’ as cover to underground cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches complete all as specified and directed

Supply, laying and testing XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 10 sq mm 2 core after cutting to required length with necessary glands, nuts, bolts, and lugs laid in trenches/fixed to wall etc complete all as specified and directed

M/S C S AITHANI (BID ID -3358990)

V S ENTERPRISES (BID ID -3358770)

R K BUILDERS (BID ID -3357606)

MOGHA CONSTRUCTION COMPANY (BID ID -3359005)

VDM GROUPS (BID ID -3367381)