Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.7 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹40.3 L+₹2.6 L (6.95%)Rejected-Finance | L2 | Rejected-Finance NOT L1 |
Tender Value
₹41.1 L
EMD Value
₹82,240
Closing Date
16 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) TEZPUR
GE (AF) TEZPUR SALONIBARI DIST-SONITPUR ASSAM-784104
ADDN/ ALTN TO EXISTING OTM BUILDINGS FOR INDUCTION OF THREE AD UNITS AT AFS TEZPUR UNDER GE (AF) TEZPUR
2024_MES_652594_2
800A/E8
Open Tender
Civil Works - Others
Item Rate
270 days
TEZPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) TEZPUR
₹82,240
30 Aug 2024
21 Jun 2024
18 Jul 2024
21 Jun 2024
16 Jul 2024
29 Jun 2024
Amount
Demolition of unreiforced cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4.0 Sqm each, complete all as directed.
Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as directed.
Excavation in trenches, not exc. 1.5 m wide and not exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and directed.
Returning filling in soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Materials and labour for, PCC (1:3:6) type C1(using 20 mm graded crushed stone aggregate) as in bed blocks for inserting hold fast, etc including necessary form work, complete all as specified and directed.
Materials and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) including demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles and depositing off the rubbish materials where directed, complete all as specified and directed.
Material and labour for 2nd class hardwood, plain fillets square, rectangular or triangular in section, bullnosed, splayed, chamfered or rounded on one edge or face, sectional area exc.6 sqcm but not exc.13 sqcm clean sawn, secure with nails or brads, complete all as spcomplete all as specified and directed.
Material and labour for, second class hard wood timber unframed clean sawn in scantlings including dismantling timber scantlings 40 sq.cm and over in section, in any position, complete all as specified and directed.
Material and labour for, 20mm thick 2nd class hard wood boarding, planed both side with butt joints and fixed complete in postion as in eaves boards etc. including dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.
Materials and Labour for, 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed, complete all as specified and directed.
Material and labour for, 35mm thick plain, 2nd class hard wood framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.
Supply and fix for, 30 mm thick, 2nd class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc. (with sash bars) divided into squares with plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24(b) and fitted to chowkhats, complete all as specified and directed.
Supply and fix for, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fix for, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed.
Supply and fix for, medium weight, cold rolled mild steel butt hinges,100mm size,complete all as specified and directed
Supply and fix for, medium weight, cold rolled mild steel butt hinges, 75mm size, complete all as specified and directed.
Supply and fix for, 100mm size, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed
Supply and fix, aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed.
Supply and fix, aluminium anodized barrel tower bolts of extruded section, 125 mm long, complete all as specified and directed.
Supply and fix, aluminium anodized barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed.
Supply and fix for, aluminium handles, fabricated type, anodised, 150 mm size, complete all as specified and directed.
Supply and fix for, aluminium handles, fabricated type, anodised, 125 mm size, complete all as specified and directed.
Supply and fix for, aluminium handles, fabricated type, anodised, 100 mm size, complete all as specified and directed.
Supply and fix for, aluminium Alloy, anodised, sliding door bolt, length of bolt 250 mm,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
Supply and fix in repairs for, aluminium (extruded section body) door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
Supply and fix in repairs for, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.
Supply and fix, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
Supply and fix in repairs for, aluminium tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets, complete all as specified and directed.
Material and labour for, MS hold fast made up of FI 25 x 3mm conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.
Material and labour for mild steel works, hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
Supply and fix for, powder coated (minimum thickness of powder coating 50 micron) aluminium three track window and ventilator frame with powder coated (minimum thickness of powder coating 50 micron) aluminium sliding glazed shutters, without sash bars, including necessary jointing cleats, glazing clips, rubber packing, powder coated (minimum thickness of powder coating 50 micron) aluminium snap beading, locking arrangements, handle screws etc. including 4mm tinted glass and taking down of existing shutter with framecomplete all as specified and directed. (i) Refer list of Drawings. (ii) Overall size of opening will be measured.
Supply and fix in repairs for, powder coated aluminium door frame and shutter single leaf panelled door partly glazed with 5mm thick glass and partly 6mm thick prelaminated board door shutter divided into two panels fabricated including powder coated aluminium snap beading and rubber gasket/ lining for fixing of glass and prelaminated board panel. The door frame shall be fixed aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size. The door frame and shutter shall be comprising of the following section and fitting including taking down of existing shutter with frame and fittings complete all as specified and directed:- (a) Aluminium door frame section 101.6x44.5x1.27mm (b) Aluminium styles of shutter section 85x44.5x1.56mm (c) Aluminium top & bottom rail of shutter section 101.6x44.5x2.5mm (d) Aluminium middle/ lock rail of shutter section 100x44.45x2mm (e) Aluminium handle 250mm long 02 Nos in each shutter (f) Aluminium tower bolt 200mm long as required as per normal (g) Six lever mortice lock brass (h) 03 Nos aluminium butt hinges 100mm long (j) 06mm thick pre-laminated board (k) 5.0mm thick tinted glass (Note: In case of two leaf each leaf will be measured seperately) Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.
Supply and fix for, aluminium with powder coating (minimum thickness of powder coating 50 micron) frame 63.5 mm x 38.10 mm x 2.5 mm and aluminium with powder coating (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m with half portion provided with louvers of 04 Nos 4 mm thick figured glass, pin head type and rest half portion fixed with 4mm thick figured glass, pin head type and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., (Thickness of aluminium sections not less than 1.5 mm), including taking down existing with fittings, complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.
Supply and fix for, 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc., complete all as specified and directed.
Supply and fix for, asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed.
Materials and labour for, anodised aluminium snap grid frame work for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 4mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws including dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets,any thickness, complete all as specified and directed.
Materials and labour for, anodised aluminium snap grid frame work for false ceiling/ wall panelling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including perforated particle board for insulation/ sound proofing, 60 x 60cm in size and 12mm thick fixed with nails to timber frame work or with staples on snap grid including dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets, any thickness, complete all as specified and directed.
Material and labour for 75mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.
Material and labour for 100mm thick plain cement concrete (1:2:4) type B2 (using 40mm graded crushed stone aggregate) as in floor/ paving/ hardstanding etc. finshed the surface even and smooth without using extra cement, complete all as specified and directed.
Material and labour for, glass dividing strips 3mm thick and 22mm width inserted in position, conforming to design, complete all as specified and directed.
Material and labour for, non skid ceramic tiles, coloured 7 to 8mm thick (square/ rectangular) area of each tile exc.0.11 Sqm but not exc.0.18 Sqm conforming to IS 15622, economy class, grade B IIa on floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour over and incuding 20mm thick screed bed in cement mortar (1:6), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Material and labour for, non skid ceramic tiles, coloured 7 to 8mm thick (square/ rectangular) area of each tile exc.0.18 Sqm but not exc.0.38 Sqm conforming to IS 15622, economy class, grade B IIa on floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour over and incuding 20mm thick screed bed in cement mortar (1:6), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Materials and labour for non skid ceramic coloured tiles, 7 to 8mm thick area of tile exc.0.11 Sqm but not exc.0.18 Sqm, conforming to IS 15622, economy class, Grade B IIIa, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of cement mortar (1:3), including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,, complete all as specified and directed.
Materials and labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on fair faces of brick work or concrete surface in walls and finished even and smooth without using extra cement, complete all as specified and directed.
Gsupply and fix in repairs for, GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste, complete all as specified and directed.
Materials and labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on one side of lathing and finished the surface even and smooth without using extra cement, including taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.
Materials and labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on other side of lathing and finished the surface even and smooth without using extra cement, including taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.
Material and labour for, preparation of new plastered or unplastered surfaces and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.
Material and labour for washing, rubbing down and stopping of distempered and old painted surfaces and applying one coat of distemper oil emulsion,on walls, complete all as specified and directed.
Supply and fix for, 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.
Material and labour for, Preparation of surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and directed.
Material and labour for, preparation of surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with two coats of tar or coal tar black paint, complete all as specified and directed.
Material and labour for, preparation of surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated ends of post, backs of chowkats etc.area exc.0.10Sqm but not exc.0.50Sqm each with two coats of tar or coal tar black paint, complete all as specified and directed.
Material and labour for, preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and directed.
Materials and labour for galvanized steel tubing, medium grade, 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Materials and labour for galvanized steel tubing, medium grade, 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Supply and fix in repairs for, vitreous china urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.
Supply and fix in repairs for, vitreous China wash basin, white, flat back, size 550mm X 400mm excluding taps, waste chain and porcelain stopper, but including brackets, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed.
Supply and fix in repairs for, vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed.
Supply and fix in repairs for, pillar taps, cast copper alloy, with capstan heads, fency type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, complete all as specified and directed.
Supply and fix in repairs for, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect and specified.
Supply and fix in repairs for, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.
Supply and fix in repairs for, PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 litres, including brackets, flush pipe, complete all as specified and directed.
Supply and fix in repairs for, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.
Supply and fix in repairs for, 15mm bore, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as directed.
Taking down DBs including MCBs etc.complete all as directed.
Taking down carefully unserviceable sub main wiring of any size/ core/ type including making good the disturbed surfaces, complete all as directed.
Material and labour for point wiring with 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed, multistranded copper conductor cable 1100 volts grade, single core, laid in and including not less than 20mm size PVC casing capping (medium grade) complete with all fittings and accessories, fixed to walls/ ceiling, including sunk type pressed steel terminal boxes 60mm deep, conforming to IS-5133 (Part-I) with 3mm thick plastic laminated sheet cover (ISI marked) for mounting switches/ regulator/ bell push etc. and including 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed multistarnded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected common earth dolly for one light/ fan point controlled by one switch including making good disturbed surfaces of walls, floor etc., including testing on completion, complete all as specified and directed.
All as per serial item No.73.00 here-in-before but for one 3 pin 5 Amps socket outlet on independent board.
All as per serial item No.73.00 here-in-before but for one 3/5 pin 5 Amps socket outlet on same board.
All as per serial item No.73.00 here-in-before but point wiring with 2.50 Sqmm (nominal area) and 2.50 Sqmm (nominal area) earth continuity conductor for one 3 pin 15 Amps socket outlet on independent board.
Supply and fix for, switch piano, flush type single pole, one way 5 Amp, 230 volts, complete all as specified and directed.
Supply and fix for, bell push, flush type, 5 Amps, 240 volts, complete all as specified and directed.
Supply and fix for, buzzer, Ding Dong AC. 230 volts, single pole, complete all as specified and directed.
Supply and fix for, ceiling rose, surface bakelite, 65mm x 50mm three terminals, AC, 230 volts, complete all as specified and directed.
Supply and fix for, socket outlet 3 pin, 6A, flush type, 240 volts, complete all as specified and directed.
Supply and fix for, switch socket combination 2 in 1, 5Amps, 5 pin multipurpose, flush type, 230 volts, complete all as specified and directed.
Supply and fix for, switch socket combination 2 in 1, 15Amps 6 pin multipurpose, flush type, 230 volts, complete all as specified and directed.
Supply and fix for, PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep, complete all as specified and directed.
Supply and fix for, PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep, complete all as specified and directed.
Supply and fix in repairs for, single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps capacity, complete all as specified and directed.
Supply and fix in repairs for, LED batten with tube 1x20 watts, 6500K, system luminous efficacy more than 100 Lm/W with high quality aluminium extruded with decorative end caps all as per Cat No.CCS-100-20-65-HL2-DP-NWH of make Crompton or equivalent model of make Bajaj/ Philips/ Wipro, with five years manufacturer warranty and including removing and making good disturbed surfaces, complete all as specified and directed.
Supply and fix in repairs for, LED batten with tube 1x10 watts, 6500K, system luminous efficacy more than 100 Lm/W PC batten decorative end caps all as per Cat No.CCS-102-10-65-SL-DP-NWH of make Crompton or equivalent model of make Bajaj/ Philips/ Wipro, with five years manufacturer warranty and including removing and making good disturbed surfaces, complete all as specified and directed.
Supply and fix in repairs for, 10 watts surface mounted, 6000K, LED oval bulk head decorative luminaire comprising of PDC housing with acrylic diffuser (IP65 protection) high brightness LEDs all as per Cat No.LBHP-10-CDC of make Crompton or equivalent model of make Bajaj/ Philips/ Wipro, complete withs with five years manufacturer warranty and including removing and making good disturbed surfaces, complete all as specified and directed.
Supply and fix in repairs for, 36 watts 6500K recessed mounted square panel (2x2) with die cast aluminium housing all as per Cat No.TCR-145-36-65-SL-NWH of make Crompton or equivalent model of make Bajaj/ Philips/ Wipro, with five years manuafacturer's waranty and including removing and making good disturbed surafces, complete all as specified and directed.
Material and labour for, sub main/ circuit wiring with four single core FRLSH PVC insulated unsheathed cable 6.00 Sqmm (nominal area) with multistranded copper conductor cable, 1100 Volts grade, drawn through and including casing & capping not less than 20mm size including earth continuity conductor of 2 runs of FRLSH PVC insulated, unsheathed multistranded copper cable 6.00 Sqmm (nominal area), 1100 volts grade, complete all as specified and directed. (Note: Four runs of wiring cable and two runs of earth wire alongwith one run of PVC casing & capping will be measured as one unit).
Material and labour for, sub main/ circuit wiring with two single core FRLSH PVC insulated unsheathed cable 4.00 Sqmm (nominal area) with multistranded copper conductor cable, 1100 Volts grade, drawn through and including casing & capping not less than 20mm size including earth continuity conductor of one run of FRLSH PVC insulated, unsheathed multistranded copper cable 4.00 Sqmm (nominal area), 1100 volts grade, complete all as specified and directed. (Note: Two runs of wiring cable and one run of earth wire alongwith one run of PVC casing & capping will be measured as one unit).
Material and labour for, sub main/ circuit wiring with two single core FRLSH PVC insulated unsheathed cable 2.50 Sqmm (nominal area) with multistranded copper conductor cable, 1100 Volts grade, drawn through and including casing & capping not less than 20mm size including earth continuity conductor of one run of FRLSH PVC insulated, unsheathed multistranded copper cable 2.50 Sqmm (nominal area), 1100 volts grade, complete all as specified and directed. (Note: Two runs of wiring cable and one run of earth wire alongwith one run of PVC casing & capping will be measured as one unit).
Supply and fix in repairs for, MCB, SPN, 240 Volts, 10KA, 'C' curve, 32 Amps, complete all as specified and directed.
Supply and fix in repairs for, MCB, SP, 240 Volts, 10KA, 'C' curve, 6 to 32 Amps, complete all as specified and directed.
Supply and fix in repairs for, MCB, four pole, 415 Volts, 10KA, 'C' curve, 63 Amps, complete all as specified and directed.
Supply and fix in repairs for, sheet metal enclosure, double door, vertical type, DBs for mounting of MCB for 240 Volts, SPN 4 way, with 200 Amps rated bus bar, complete all as specified and directed.
Supply and fix in repairs for, sheet metal enclosure, double door, vertical type, DBs for mounting of MCB for 240 Volts, SPN 8 way, with 200 Amps rated bus bar, complete all as specified and directed.
Supply and fix in repairs for, sheet metal enclosure, double door, vertical type, DBs for mounting of MCB for 240 Volts, SPN 12 way, with 200 Amps rated bus bar, complete all as specified and directed.
Supply and fix in repairs for, sheet metal enclosure, double door, vertical type, DBs for mounting of MCB for 415 Volts, TPN 4 way, with 200 Amps rated bus bar, complete all as specified and directed.
Taking down old unserviceable aluminium/ GI/ copper strip with saddle of any size and type complete all as directed.
Taking down old unserviceable air termination rod 12mm dia, 300mm long any size and type complete all as directed.
Taking down test point terminal block of any size and type complete all as directed.
Taking down old unserviceable GI steel tubing 40mm bore complete all as directed
Supply and fix for, single pointed air termination aluminium rod 12mm dia, 300mm long, complete all as specified and directed
Material and labour for, test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw, complete all as specified and directed
Material and labour for, aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed.
Material and labour for, galvanised iron strip 32 x 6mm buried in ground, complete all as specified and directed.
Supply and laying, galvanised steel tubing, 40mm bore, medium grade including fittings in trenches or fixed to walls etc. for protection of earthing strips, complete all as specified and directed.
Material and labour for, earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.50 metre below normal ground level connected to galvanised steel earth lead wire of 4mm by means of bolts, nuts, check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54cm x 54cm x 5cm reinforced with 8mm dia. TMT bars @100mm centre to centre both ways, with one handle for lifting made out of 10mm dia MS round bar, provision of funnel, wire mesh, 20mm bore galvanised steel tubing (medium grade) for watering, charcoal or coke and salt in alternate layers, 15mm bore galvanised steel tubing light grade for protection of earth lead connection, necessar excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No.3 of SSR Part-I (2009) including testing on completion. (Note: GI earth strp and protection pipe upto 7.5metres shall be deemed to be included in unit quoted rate).
Material and labour for, earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.50 metre below normal ground level connected to galvanised steel earth lead strips of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54cm x 54cm x 5cm reinforced with 8mm dia. TMT bars @100mm centre to centre both ways, with one handle for lifting made out of 10mm dia MS round bar, provision of funnel, wire mesh, 20mm bore galvanised steel tubing (medium grade) for watering, charcoal or coke and salt in alternate layers, 40mm bore galvanised steel tubing light grade for protection of earth lead connection, necessar excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No.3 of SSR Part-I (2009) including testing on completion. (Note: GI earth strp and protection pipe upto 7.5metres shall be deemed to be included in unit quoted rate).
M/s Hrishikesh Das
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .