SPECIAL REPAIR OF INTERNAL RAOD OF FASF, OMC AND 425 (I) FD COY ENGRS AND K S LINE-II AREA AT MIL STN BHAJ UNDER GE (ARMY) BHAJ

Rolling of existing surface including cutting and levelling upto required level and depth all as per specified and directed by Engineer-in-Charge as per ground conditions.

Material and labour for 100 mm avg thickness plain cement concrete 1:4:8 type D-2 (using 40mm grded stone aggregate) as in sub base complete all as specified and directed.

Material and labour pavement quality concret (PQC) of minimum 28 days field flexural strength of 45 Kg/Sqm of 4.5 Mpa, aggregate gradation as per table 3 of IRC 15-2017, coarse aggregate of clean, hard stone, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregate of clean natural sand or crushed stone sand or combination of both using minimum 360 Kg/cum of cement with non-circular , virgin synthetic 12-18mm length specific gravity 1.34 to 1.39 , UV stable, alkali resistant with equivalent dia 15-40 micron minimum melting temperature as 240 C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer, PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by texturing cum curing machine complete all as specified and directed. Required surface texturing to be done as specified in clause 10.1.14 and table -9 of IRC 15-2017 complete all as specified and as directed.

Material and labour for forming construction joint 30mm deep X 10mm wide filled with sealing compound grade 'A' for 200 mm thick concrete slab complete all as specified and as directed.

Material and labour for preparing bituminous surfaces/ concrete surface of road and marking 1.5-2 mm thick centre lines,stop lines,dashes,arrows etc. width of 10cm or above on roads pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Taking down solar cat eye/cat eye solar reflective in any position fixed in road complete all as specified and directed by Engr-in-Charge.

Supply and fixing of cat eye solar reflective type of metal body alloy size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972 fixed with and incl MS stud of suitable size as per manufacturing instructions.

Demolition of precast concrete articles like kerb stone built in cement mortar complete all as specified and directed by Engr-in-Charge.

Material & Labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm ), including making drainage opening wherever required complete size and shpe as aprroved by Engr-in-Charge.

Material and labour for preparation of new concrete surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over coat of primer all as specified and as directed.