Loading
Loading…
Loading…
| # | Schedule | Awarded To | Bids | Value |
|---|---|---|---|---|
| 1 | 3 ROLL,35 DEGREE GARLAND IMPACT ROLLER, DIA 127 ERW 4THK,CS,PIPE,RUBBER OD DIA 170 DEGREE,DEEP GROOVE,BRG 6206( DIA 30 DEGREE),1200MM SPACING. 3Rollers combindedly form one No (Set) please collect sample at our site before manufacturing and dispatching the material. | GANAPATHI INDUSTRIAL ENGINEERING ENTERPRISES | 2 | ₹4,602 |
| 2 | CARRYING IDLER 3 ROLL 35 degree DIA:152.4MM,LENGTH:465MM,SEIZE RESISTANCE BRG,420207,SHAFT DIA AT BRG dia 35MM SUITABLE FOR BELT WIDTH:1200MM 1.Rollers shaft material shall be EN-8 2.All Bearings for rollers shall be seize resistant with nylon cage single row deep groove heavy duty ball bearings of SKF/FAG/NTN make and life of bearings:30,000Hours min. 3.Idler shells are of 4.85mm thick ERW tube as per IS:9295. 4.Idler shall be provided with double labyrinth dust seal. 5.All idlers rollers shall be dust and water proof under worst ambient conditions of dusty surroundings and heavy rains. 6.All rollers are drop in type and life sealed lubricated. 7.Rollers run out shall not be more than 0.8mm and tolerance as per IS:8598 | PRAYAG ENGINEERING EQUIPMENT | 2 | ₹1,639.08 |
| 3 | IMPACT IDLER, SIZE: 465 MM X 190 MM, BARREL: ERW TUBE AS PER IS-9295 ( 114.5 MMX 4.5 MM ), SHAFT: 30 MM EN-8, BRIGHT BAR, EDGE-18MM, BEARING: 420206 SEIZE RESISTANCE ( LIFE LUBRIATED WITH GREASE) .please collect sample at our site before manufacturing and dispatching the material | PRAYAG ENGINEERING EQUIPMENT | 2 | ₹2,243.44 |
| 4 | RETURN IDLER 2 ROLL 10 degree DIA:152.4MM,LENGTH:700MM,SEIZE RESISTANCE BRG,420205,SHAFT DIA AT BRG dia 25MM SUITABLE FOR BELT WIDTH:1200MM 1.Rollers shaft material shall be EN-8 2.All Bearings for rollers shall be seize resistant with nylon cage single row deep groove heavy duty ball bearings of SKF/FAG/NTN make and life of bearings:30,000Hours min. 3.All idlers rollers shall be dust and water proof under worst ambient conditions of dusty surroundings and heavy rains. 4.Idler shall be provided with double labyrinth dust seal. 5.Idler shells are of 4.85mm thick ERW tube as per IS:9295. 6.All rollers are drop in type and life sealed lubricated. 7.Rollers run out shall not be more than 0.8mm and tolerance as per IS:8598 | PRAYAG ENGINEERING EQUIPMENT | 2 | ₹1,894.28 |
Tender Value
Refer Docs
Closing Date
18 Nov 2025, 12:00 amClosed
Different types of Idlers(rollers)
618413
314/2025-26/CE/O&M/KTPP/CHP MM/Supply of Different types of Idlers(rollers)
Goods
Telangana
22 May 2026
18 Nov 2025
stage.html
html • 0.01 MB
aoc.html
html • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].