Road Signage work on Widening and Strengthening of Rampur Badakhas Simra Hardua Hardaspur Navadia Bhaisodi Road (ODR) from Ch. 6.600 To 14.700 in District Rampur

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (as per IRC:67-2012 clause 14.60)

Stop Sign Board (90 cm hight Octagonal)

Speed Limit 30 (60 cm circular)

Chevron Board Single Side 50x60 cm

Route Marker Sign Board 45x60 rectangular

Object Hazard Marker left and right (30 cm x 90 cm rectangular)

Cat Eyes (raised pavement marker). Supply & fixing of moulded cats eye with shank raised pavement markers made of polycarbonate moulded body and reflected pannel with micro prismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD for 4280 type 'H' and complying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-07-DO-III 11-06-1997. The height, width and length shall not exceed 20 mm 150 mm and 105 mm and with minimum relfective area of 13 sqcm. and the each side slope to the base shall be 350. Fixing will be without nails but using with twin polymer shanks bitumen adhesive on bitumen roads as per manufacture's recmmendation including site clearence etc. and complete as per direction by E/I.

Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area. Thickeness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level uniform and free from streak and holes. (Road Strips)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminouse Surface. (Repeated/Tranvers bar) Providing and laying of hot appiled thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area. Thickeness of 5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level uniform and free from streak and holes.

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixed in position including painting & Printing Etc

5th Km Stone

Ordinary Km Stone

Hectometer Stone

Please Enable Macros to View BoQ information