AUDIO/VIDEO CONFRENCING WORK IN DISTRICT DISASTER MANAGEMENT AUTHORITY AT ALMORA.

Supply of 98 Inch LED Display, 440 Typical nits, Full Array LED, Smart Android, 4K UHD, 24X7, Airplay/Chromcast, 5000:1 Contrast Ratio, 120Hz Refresh Rate, 32GB Storage, XR Triluminos Pro, Cognative Processor XR, 40W Speakers, HDR10, HLG, Dolby Vision, HDMI (4), Digital Audio Out (1), USB (2), Ethernet (1).

Supply of Steel Wall mount stand for above Display

Supply of PTZ Camera, Full HD Resolution: 1/2.8 inch high quality CMOS sensor. Resolution is up to 1920x1080 with frame rate up to 60 fps. Multiple Optical Zoom Lens: 20X optical zoom lens. Leading Auto Focus Technology: fast, accurate and stable auto focusing technology. Low Noise and High SNR: super high SNR image is achieved with low noise CMOS. Advanced 2D/3D noise reduction technology further reduces the noise while SUpply of ensuring high image clarity. Multiple video output interfaces: HDMI, SDI, USB 3.0, LAN. Simultaneously output: audio and video signal via HDMI, SDI and LAN. LAN interface supports PoE, USB 3.0 support dual code stream, SDI support transmission up to 100m under 1080p60 format Multiple Audio/Video Compression Standards: support H.264/H.265 video compression, up to 1920×1080 resolution 60 fps; support AAC, MP3 and G.711A audio compression, 8000, 16000, 32000, 44100,48000 sampling frequency USB 3.0 Support Dual Coding Stream: support main stream and sub –stream, and simultaneous output; support YUY2, MJPEG, H.264, NV12, H.265 video coding format Built-in Gravity Sensor: support PTZ auto-flip function and easy installation. Multiple Network Protocol: support ONVIF, GB/T28181, RTSP, RTMP, VISCA OVER IP, IP VISCA & RTMPS protocols; Support RTMP push mode, easy to be connected to streaming server (Wowza, FMS); Support RTP multicast mode; Control Interface: RS422 is compatible with RS485, RS232-IN, RS232-OUT, and the RS232 interface supports cascading. Multiple Control Protocol: support VISCA, PELCO-D, PELCO-P protocols; Support automatic identification protocols. Quiet Pan / Tilt Movement: with high accuracy step driving motor, camera can pan / tilt extremely quiet and smooth. Various remote controls: users can choose infrared remote control or wireless remote control according to the environmental conditions used. The 2.4G wireless remote control is not affected by angle, distance, and infrared interference. Support the remote control signal transparent transmission function, which is convenient for back-end equipment to use. AI Human Detection: built-in high-speed processor and advanced image processing and analysis algorithms, users can choose real-time tracking and regional tracking according to the environment. Makes- DVDO/AVER/VADDIO

Supply of camera mount for above camera

Supply of The fixed I/O DSP shall support Audio Video Bridging (AVB) digital audio networking that shall allow up to 128 x 128 channels. The AVB networking connection shall be implemented on a RJ-45 connector. The fixed I/O DSP shall support Ethernet connection for programming and control on a RJ-45 connector. The fixed I/O DSP shall have internal DSP processing. The fixed I/O DSP shall include 4 channels of General Purpose Input and Output connection (GPIO) for sending or receiving logic signals. The programming of the GPIO ports shall be software configurable. The fixed I/O DSP shall include a RS-232 connection for control data transmission into or out of the fixed I/O DSP and such operation shall be software programmable. The fixed I/O DSP shall include a Universal Serial Bus (USB) connection on a standard USB-B type connector. The fixed I/O DSP shall be software configurable to stream up to 8 channels of digital USB Class 1 Audio transmission either into or out of the fixed I/O DSP or simultaneous input and output. The fixed I/O DSP shall support port authentication via IEEE 802.1X. The fixed I/O DSP shall provide 12 balanced input connections for receiving of microphone or line level analog audio signals on screw-down, removable connectors. The input connections shall include Acoustic Echo Cancellation (AEC) hardware and firmware, the parameters, routing and operation of which shall be software programmable. The fixed I/O DSP shall provide 8 balanced output channels for the transmission of microphone or line level analog audio signals on screw-down, removable connectors. Each individual channel shall have its own dedicated connection. The fixed I/O DSP shall integrate to Voice Over Internet Protocol (VoIP) systems on a RJ-45 connector for two lines of VoIP communication and shall support Session Initiation Protocol (SIP) v2.0 or later. The fixed I/O DSP shall integrate to standard telephony communications on a RJ-11 connector for a single line of telephone communication. The fixed I/O DSP shall provide front panel OLED identification of device power, status, alarm, and activity as well as system-wide alarm. The fixed I/O DSP shall be rack mountable (1RU) and feature software-configurable signal processing, including but not limited to:signal routing and mixing, equalization, filtering, dynamics, and delay, as well as control, monitoring, and diagnostic tools. The fixed I/O DSP shall control devices. The fixed I/O DSP shall be CE marked, UL listed, and shall be compliant with the RoHS directive. Warranty shall be five years. Makes- Biamp/Symentrix/DVDO

Supply of Wall Mount Speaker two-way, 6.5-Inch or better IP64 rated Surface mounted loudspeaker, The loudspeaker shall be suitable for mounting on wall and include a 6.5 inch/165.1 mm driver and a 1 inch/25.4 mm tweeter in a 2-way design with coated paper woofer material and an IP rating of IP64. Both woofer and tweeter will be mounted in a 5° down tilt angle into the cabinet. Shall include a transformer with multiple taps of 60 - 30 - 15 - 6 watts at 100v and 60 - 30 - 15 - 7.5 - 3 watts at 70v. Shall have a dynamic power of at least 200 watts and the low impedance connection, Shall present a load of 16 ohms to the amplifier. The output sound pressure level at a distance of 1m with 1watt input level applied shall be at least 90 dB, The maximum output sound pressure level at a distance of 1m with full power applied shall be at least 110 dB. The loudspeaker shall have a frequency response of at least 65 - 20kHz. Shall have Nominal Beamwidth (H x V) 100° x 50° or better, Sensitivity of 87db or more & Max SPL of 118 dB peak or better. Makes- Biamp/L-Accosutic/Zycoo

Supply of Amplifier shall provide 4 output channels and a total of 300 W output power. The amplifier shall provide output channels individually configurable for driving up to 150 W per channel into a per channel selectable loudspeaker load including 4 ohm, 8 ohm, 70V, and 100V options. The amplifier shall feature a high pass filter at 70 Hz that can be manually switched on and off per output channel. The amplifier shall support 4 analog, line level, balanced inputs for the reception of signal. The amplifier shall provide input and output channels on Euroblock connectors. The amplifier shall provide LED identification of signal, limiting, and temperature for each channel. The amplifier shall provide control of power state as well as mute all outputs via logic inputs. The amplifier shall provide monitoring of power state and health via logic outputs. The amplifier shall support being surface mounted onto a wall or under a table with included hardware. The amplifier shall also be half-rack width and be rack mountable as a single unit or in pairs and fit in one rack unit (1U) with included hardware. The amplifier shall feature a standby operation that is enabled when no signal is present and shall leave the standby state when signal is present again. The amplifier shall be CE marked, UL listed and shall be compliant with the RoHS directive. Warranty shall be 5 years. Makes- Biamp/L-Accosutic/Zycoo

Supply of Wireless Handheld Mic, Operating Frequencies F-Band: 824 - 831 MHz, 863 - 865 MHz,Frequency Response 60 Hz - 16 kHz,Operating Range 60m,Condenser Cardioid,Sensitivity 10dBµV (S/N 60dB @ 20 kHz deviation),Makes- Audio Technica/Sennheiser/Shure

Supply of Digital Conference Control unit /Server. Should have minimum 3 x Conference Network Ports (RJ45) or better, 1 x LAN Port, 1 x Balanced XLR audio input, 1 x Balanced XLR audio output or more, Should have internal / External Conference recording capablity, Camera Control integration capability. Controller Must have Dante / AES67 interface. Power supply should be from same OEM.Server Should be able to drive chairman/delegate units mentioned in the tender with the help Extension unit and power supply unit. Intel® Core™ i7-12700 Processor (2.1 GHz, up to 4.9 GHz w/Boost, 25 MB cache, 12 core, 65W), 16 GB (2 x 8 GB) DDR5 4800 SODIMM Memory, 256 GB PCIe 4x4 2280 Value M.2 SSD, 2x 1 Gbps Ethernet adapters, Approved Makes: Televic/ Brahler/ Marconi technology/ DPA

Supply of Goosenck Mic Table top Delegate Discussion Unit with removable Gooseneck microphone. Microphone lenght: 360mm or better. Microphone must have led indicator. Microphone Should have USB-C port Connection /Mini USB/ Screw lock 5-Pin/ Din-Pin conncetor. Delegate Discussion Should have built-in Digital Signal Processing. Unit should provide Priority to speak to chairman. Audio quality : 16 bit digital or better.Speaker: minimum 4W or better.Frequency response: 25 Hz-15,000 Hz or better. 3.5 mm stereo jack socket for headphones output with volume adjustment. Connectivity: Concealed conference bus connections. 2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loop through, daisy-chain cabling (non-proprietary). Unit with Bi color bar indicatorConnectivity: Concealed conference bus connections, 2 x RJ 45 ethernet port (IN/OUT - interchangeable), Loop through, daisy-chain cabling (non-proprietary).Compatible screw lock microphone connectivity. Certification: CE; BIS. Approved Makes: Televic/ Brahler/ Marconi technology/ DPA