SPECIAL REPAIR OF ROOF, FLOORING, PLASTERING OF WALL

Amount

Demolition of stones or brick masonry, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc.complete,all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, all as specified.

Dismantling plain or corrugated steel sheeting any guage, thickness including Nainital or similar pattern roof covering, all as specified.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified & directed.

Taking down chowkhats or frames exc 1.50 sqm but n.exc 4.00 sqm with shutters (without taking off shutters from the frames) all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete all as specified.

Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Excavation in trenches for pipes, laying of cables and manholes in any type of soil n.exc 1.5m wide and but exc 1.5m deep and getting out complete all as specified and directed.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specified and directed.

Removal of excavated material (soil) to a distance exc 500m but n.exc 1.50 Km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

4 mm thick non asbestos fibre cement bldg boards as in ceiling including two coat of colour wash, placed on GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.90 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete size of grid 605 x 605 mm all as specified and directed .

Plain cement concrete M-15, nominal mix, B-0 using 12.5mm graded mechanically crushed stone aggregate as, in lintels upto 1.5 metre clear span, steps, seismic and other similar bends, coping, bands plates for serving hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating complete all as specified.

Precast cement concrete M-15, nominal mix, type B-1 (using 20mm graded mechanically crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in cement mortar 1:4 (1 cement : 4 coarse sand), all as specified. Note for Serial Item No 16 & 17:- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Reinforced cement concrete M-25 (Design Mix), type A-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves. complete all as specified and directed. Note:- Reinforcement and form work shall be measured and paid separately.

Form work to soffits of suspended slab such as roof slabs, floor slab landing etc and similar works not exceeding 200mm thick (horizontal or sloppy) for rough finished surfaces of concrete.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide , roughly finished surface of concrete, all as specified.

TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded etc., complete, as specified, supplied and fixed including one shop coat of red oxide zinc chrome primer, all as specified.

Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded etc., complete, as specified, supplied and fixed including one shop coat of red oxide zinc chrome primer, all as specified.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified, fixed including one shop coat of red oxide zinc chrome primer, all as specified. Note for Serial Item No 23 to 25:- Weight of steel windows shall be asessed by BOO convened by GE.

Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed.

Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe 410 -W (Gde-E- 250) quality-A, steel work duly painted with one shop coat of zinc chromate primer including preparation of surfaces all as specified.

Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, all as specified and directed.

Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley/ eaves/ rain water gutters, drip and straight flashing (length and girth as fixed), fixed with self tapping screws all as specified

75 mm thick plain cement concrete M-10 (Nominal mix), type C-2 (using 40mm graded brick aggregate) as in foundations/ sub base or in mass filling all as specified and directed.

Hard core of broken stone or boulders of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, all as specified.

Plain cement concrete M-10 nominal mix, type C-1 using 20 mm graded mechanically crushed stone aggregate as in surface channel and drains all as specified.

Extra for forming fair finished channel or drain 30 cm and over inner girth in cement concrete using extra cement, including forms, moulds, stopped ends etc., all as specified.

Factory made 35 mm thick second class hard wood (Sal/ Hollock) glazed and skelton door shutters open rebated and prepared to receive glass gauge etc (with out sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified.

Factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled 35mm thick shutters (two panels) with lock rail and panels of 9mm BWP commercial plywood or 12mm veneered particle with commercial face veneers on both sides. The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, all as specified.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1) specified and directed.

Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet and edges shall be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 160 of MES SSR 2010 Part-II

Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm long, all as specified and directed.

Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia 100mm size all as specified.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm, complete all as specified.

Extruded aluminium alloy handles, fabricated type, anodised of size 150 mm all as specified and directed.

Extruded aluminium alloy handles, fabricated type, anodised of size 200 mm all as specified and directed.

Aluminum alloy handle, cast type anodised of size 150 mm complete all as specified and directed.

Butt hinges, medium weight, cold rolled, mild steel 100mm complete all as specified and directed.

Aluminium anodised, barrel tower bolts of size 150mm extruded section and fixed all as specified & directed.

Mild steel, 300mm, ordinary rat tail, rod pattern springs including roller and roller plate complete fixed to chowkhats, all as specified.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanised wire staple fixed with stainless steel wire staples all as specified and directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified. Note:- Size of flat iron for fixing grills shall be 20X5mm.

Mild steel hand rails, half round or other stock section of core for wooden hand rail straight portion, drilled and countershunk for balusters running bars, for doors, balusters, frame work for man hole covers, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. flat iron fillets (For securing wire mesh etc) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe 290 Gde E-165, all as specified.

Pressed steel frames for doors of size 105 mm X 60 X 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed including one shop coat of red oxide zinc chrome primer and filling frame with PCC m-15, type B-0 using 12.5 mm graded crushed stone aggregate, all as specified and directed.

Pressed steel frames for doors of size 125 mm X 60 X 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed including one shop coat of red oxide zinc chrome primer and filling frame with PCC m-15, type B-0 using 12.5 mm graded crushed stone aggregate, all as specified and directed.

18/ 19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in wall panelling, cup board shutters etc., complete all as specified.

Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved).

20mm thick granite (of any type) work (table rubbed and polished) as in steps, floors, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing complete laid over and including 15 mm thick screed bed in cement mortor (1:6) (1 cement : 6 coarse sand) laid and jointed with gray cement slurry mixed with pigment, complete all specified.

Mat finish, premium quality, coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.

Glazed ceramic, premium quality, coloured/ printed tiles 450mm x 350mm x 7 to 8 mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed.

Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase complete, all as specified.

Machine cut kota stone slab 18-20 mm thick as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab as in in skirting, dados, risers to steps etc, laid over and including 10 mm screed layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified.

25mm thick cement concrete M-15 (Nominal mix) type B-0 (using 12.5mm graded crushed stone agg ) as in flooring, finished even & fair complete all as specified and directed.

Coloured chequered cement concrete tiles machine pressed of size 20cms x 20 cms x 25mm thick with grey cement, set jointed & pointed in neat cement slurry mixed with pigment to match the shade of the slab in floors laid over and including 15mm thick screed bed in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 50mm thick sand cushion, joints of tiles filled with dry sand and compacted with mechanical vibrator complete all as specified and directed.

Rendering cement plaster 10 mm thick on fair faces of brick/ concrete surface in cement mortar 1:6 (1 cement : 6 coarse sand) and finished even and smooth without using extra cement complete all as specified.

Rendering 10mm thick plaster on concrete surfaces as in facia or ceiling in cement mortar 1:3 (1 cement : 3 coarse sand) finished even and fair without using extra cement, complete all as spfd and directed by Engr-in-Charge.

Rendering cement plaster 15 mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer), on other than fair faces of brick wall or on stone masonry surfaces, trowelled to even and smooth finish without using extra cement complete all as specified.

3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed.

3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane, all as specified.

Mild steel galvanised iron tubings (ISI Marked) 15mm dia medium grade with all fittings & fixtures complete to walls/ ceilings or laid in floors all as specified and directed.

Mild steel galvanised iron tubings (ISI Marked) 20mm dia medium grade with all fittings & fixtures complete to walls/ ceilings or laid in floors all as specified and directed.

Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including taking down of old tank, all as specified.

Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down high pressure, screwed for iron pipe or for brass ferrule fixed in repairs, all as specified.

Stop valves/ angle valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed in repairs complete, all as specified. (Makes mentioned in Appendix 'C').

PVC connection 15mm size with PTMT nuts at boths end 450mm long and fixed in repairs, all as specified.

Chromium plated brass shower rose, fancy type, 125mm size with shower arm, chromium plated, 195mm long with bend of 45° with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified.

Sink with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to one brick/ dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, fixed in repairs, all as specified. Make:- (Cat Part No BSSBSD-52 of make 'Blue Star or equivalent in makes mentioned in Appendix 'C').

Steel plate rack made of stainless steel having thickness 0.80 mm, fixed with plugs, washers and steel screws including bedding in cement mortar on to dwarf wall, overall size 900mm x 900mm X 3250 mm, all as specified and directed.

PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm complete, all as specified.

Plain cement concrete M-7.5, type D-2 nominal mix using 40mm graded aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for internal dia of pipe 100 mm (thickness of bed shall be 10 cms), all as specified. Note:- (i) The unit rate include for use of form work. (ii) Width of bed shall be outer dia of drain pipe plus 30 cms. Haunching shall be as per MES SSR-part-I/Part-II

Wash hand basins, Vitreous China (White) size 550mmx400mm, excluding tap etc including brackets with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, chain and plug, PVC 32mm dia flush pipe and all accessories fixed in repair complete as all specified and directed. Make: Cat Part No. 1008 of Cera or equivalent makes mentioned in Appx 'C'

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repairs, all as specified. Make: Cat Part No. 2071 of 'Cera' or equivalent makes mentioned in Appx 'C'

PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, in repairs, all as specified. Make: Cat Part No. 2602 of Cera or equivalent in makes mentioned in Appx 'C'.

Sheet glass assembly consisiting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard & chromium plated railing, 60 cms long, fixed with chromium plated brass screws, complete all as specified.

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190gms), complete all as specified.

Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90gms), complete all as specified.

Grating doom 100mm dia of PTMT (Minimum weight 25gms), all as specified.

Grating doom 125 mm with waste hole of PTMT. (Minimum weight 40gms), all as specified.

Mild steel curtain rod, 20 mm bore, PVC coated with all fittings i.e. wall bracket, bracket screws, all as specified.

Preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceiling or facia complete all as specified and directed.

Preparation of old treated plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified.

Painting two coats with synthetic enamelled paint on new steel or iron surfaces of any description exceeding 10cm width/ girth including preparation of surfaces over a coat of red oxide primer all as specified and directed.

Taking down point wiring with aluminium/ copper conductor for light point, socket point/ power point etc. in PVC casing and caping, surface pvc/ steel conduits, wood batten with clips including taking down board any type and size complete with any type of switches, sockets, holders, (batten or pendent type), ceiling rose etc. The light fittings (any type), main switches, distribution board with MCB’s of any capacity and make are to be removed/ replaced if required and all as specified and directed. NOTE: - Existing fan regulator (any type) and electric meters are to be refixed and connected properly where required.

Point wiring with 1.5 Sqmm copper conductor FRLS (Multistrand) PVC insulated ISI Marked unsheathed cable in and including PVC casing and caping of approved size, double lock type, medium grade, ISI marked with all fittings/ accessories as specified in preamble 1 (a) to (q) of Section 19 of SSR Part-II, under heading point wiring and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FLRS as earth wire (green colour) connected to common earth dolly for modular fitting and including modular box sunk for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet (Make Hylum or equivalent ISI marked) for one light point or one fan point through regulator or one bell point, controlled by one way switch/ push button complete including making good disturbed surfaces to match with existing all as specified and directed.

All as per serial item No '95' above, but for one 3 pin 5 Amps socket outlet on the same board all as specified and directed.

All as per serial item No '95' above, but for one 3 pin 5 Amps socket outlet, independent all as specified and directed.

All as per serial item No. '95' above but for 3 pin 15 Amps socket out let independent with 2.5 Sqmm PVC copper conductor cable and and PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified.

Switch piano flush type, single pole, one way, 5 Amps, all as specified.

Socket outlet two & three pin 5Amp flush type, all as specified.

Switch socket combination two in one, 3 Pin 5 amps and 15 amps, flush type, all as specified.

Lamp holder, PVC/Polycarbonate type with back plate suitable for angular/ batten fittings, all as specified.

Ceiling rose, 65 mm to 50 mm, two to three terminals, PVC/ Polycarbonate, insulated body fixed on PVC block, all as specified.

Bell push switch, flush type, single pole, 5 Amps, one way, all as specified.

Buzzer, Ding Dong AC, 230 volts, single pole, all as specified.

Flush type, step fan speed controller suitable for 1200/ 1400 mm sweep ceiling fan complete all as specified and directed.

Wall mounted LED integrating batten fitting T5, 20 Watt LED, 4 feet, PVC extruded with 20 watt LED tube rod with all acessoreis prewired and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete. Make:- Havell's Cat Part No. LHEWEBP71N1W020 or equivalent in makes mentioned in Appx 'C'.

Renewal of sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded RLS conductor of size 6 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 4 Sqmm and drawn into PVC conduit/ casing & capping with all fittings/ accessories, junction boxes 1 to 4 way 20mm dia, cutting chases, making good in cement mortar (1:3), finishing surfaces to match with existing and connected to common earth dolly including taking down old unservicable submain wiring, complete and as directed. Note :- Two run (each run of 1 RM) of 6 sqmm copper conductor and one RM of earth wire of 4 Sqmm, shall be measured as one RM).

Renewal of bulk head LED light fitting, 10 Watts with deep drawn anodised aluminium body, epoxy white powder coated, heat resistant prismatic glass cover with specially designed glass cover with 10 watts LED lamp with all acessoreis prewired and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete. Make : C&S Cat Part No. E-Tarta/ Crompton Greaves Cat Part No. CG80IB10WLEDor equivalent in makes mentioned in Appx 'C'.

Taking down ceiling fan of 1200/ 1400 mm sweep from fan hook dismentling blade opening of motor cleaning stator rotor, cleaning of all parts, greasing, oiling of bush & bearing, reassembling, refixing, reconnecting with 3 core copper cable of size 23/ 0.0076 from ceiling rose to ceiling fan and testing on completion, complete all as specified.

Sheet metal enclosures for DBs when MCBs to be used, single pole and neutral, 8 way, double door, 240 volts with 200 Amp rated bus bar, all as specified. Make : Havells Cat Part No. DHDPSHODPW08 or equivalent in makes mentioned in Appx 'C'.

MCB SPN 40 to 63 Amp, 240 Volts, 10 kA all as specified. Make : IndoAsian Cat Part No. 811153/ 811154 or equivalent makes mentioned in Appx 'C'.

MCB SP 6 to 40 Amp, 240 Volts, 10 kA all as specified. Make : Havell's Cat Part No. DHMCCSPF006-032 or equivalent makes mentioned in Appx 'C'.

Sand cushioning to under ground cables provided with a layer of sand 8 cms thick before laying the cable and 15 cms thick after laying the cable complete all as specified and directed.

Sub class "B" bricks for covering to cable laid dry flat, with width equal to length of bricks all as specified and directed.

Mild steel galvanised iron tubing light grade for cable protection in crossing drain of 40mm size. Make of GI tubing:- Makes as mentioned in Appendix 'C'.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm 2 core laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc including testing complete and taking out old unservicable cable all as specified. Note:- Excavation & Earth work, cable cover, GI tubing and sand cushioning shall be measured and paid separetly.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC M-15, type B-I using 20mm graded crushed stone aggregates with 40mm thick cover of RCC M-15, type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.

VIVEKA ENTERPRISES