Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹6.4 L+₹41,971.80 (7.05%)Rejected-Finance | L2 | Rejected-Finance Second Lowest | |
| 3 | L3₹6.5 L+₹50,299.40 (8.45%)Rejected-Finance | L3 | Rejected-Finance Third Lowest | |
| 4 | L4₹8.0 L+₹2.1 L (34.8%)Rejected-Finance | L4 | Rejected-Finance Fourth Lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical Due to No remarks in WLR for the QE Mar 2022 issued by HQ CEWC |
Tender Value
Refer Docs
EMD Value
₹14,880
Closing Date
14 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt, Palampur
SPL REPAIR TO BLDG NO M-16 (MT GARAGE) AND CERTAIN SANCTIONED WORKS AT PALAMPUR MIL STN
2022_MES_545768_1
GEP-23/2022-23
Open Tender
Civil Works
Item Rate
180 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Palampur
₹14,880
Yes
15 Oct 2022
17 Aug 2022
16 Sept 2022
17 Aug 2022
14 Sept 2022
31 Aug 2022
Amount
SCHEDULE 'A' PART-I:- Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out Hard/dense soil complete all as specified and directed.
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep in hard/dense soil for foundation, laying cables, foundation of poles etc. and getting out complete all as specified and as directed.
M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.
Demolition of brick work or stone /boulder masonry, built in CM, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.
Taking down wooden roof trusses,coupled rafters or trussed beams clear span above 4.00 m and upto 8.00 m complete all as specified and directed.
Taking down cement plaster on brick ,PCC block or stone walls or RCC ceiling,etc including raking out joints, hacking for key, scrubbing down with water etc,and removing of rubbish off the premises, leaving the work clear of any plaster complete all as specified and directed.
Racking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to cources built in cement or cement lime mortar, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any pointing (keeping the surface to be pointed wet for 2 days prior to repointing) complete all as specified & directed.
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
M&L rendering 15mm thick plaster on stone masonry or other than fair faces of brick work in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.
M&L raised pointing to random rubble stone masonry,un-courses or brought upto course in cement mortar 1:3 complete all as specified and directed.
M&L walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted, built in cement mortar 1:6 etc, complete all as specified
M&L prepartion of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) complete all as specified and directed.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.
M&L preparation of new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)
M&L 100 mm thick PCC 1:3:6 type C-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paver block/ path etc finishing the surface even & rough without using extra cement complete all as specified and directed.
M&L 75 mm thick PCC 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in floors/ hard standing etc finishing the surface even & smooth without using extra cement complete all as specified and directed.
M&L broken stone or boulder hardcore of gauge n exc.63mm,deposited,spread and levelled in layers n exc,15 cm thick,watered and rammed to a true surface complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed.
S&F TMT bar 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking end and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed.
S&F mild steel TMT bars 5 mm dia and over up to 10 mm dia in stirrups,spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate in footings,including rafts,footings,foundation beams,plinth beams; bases for columns,etc complete all as specified and directed.
M&L RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate in columns, pillars, piers,posts and struts,etc complete all as specified and directed
M&L RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate in beams, cantilevers, bressummers,lintels over 1.50m span, bands,etc complete all as specified and directed
M&L RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like, complete all as spfd and directed.
Form work to sides of concrete foundations, footing,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work;vertical or to batter for fair finished surfaces, complete all as specified and directed.
Form work to sides of pillars,posts,struts piers,columns and stanchions for fair finished surfaces, complete all as specified and directed.
Form work to sides and soffits of floor or roof beams,bands,beam haunchings,girders, bressummers ,lintels,cantilevers,shelves including supports,overhangs,etc also splays between floors and beams for fair finished surfaces, complete all as specified and directed.
Form work to sides and soffits of suspended slab, such as roof slab, floor slab, landing and similar work n.exc. 200mm thick (horizontal or sloping) for fair finished surfaces, complete all as specified and directed.
Form work to edges of concrete flats,treds,breaks in floors,window cills,concrete railing,opening in concrete walls,floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc20cm wide etc,fair finished surfaces of concrete complete all as specified and directed .
Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc. 25cm, complete all as specifed and as directed.
Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in sub base of flooring, leveling course of flooring or levelling course of roof etc, finisshed even and rough complete all as specified and directed.
M&L rendering 5mm thick plaster on RCC roof ceiling in CM 1:3 finished even and smooth without using extra cement, complete all as specified and directed.
M&L rendering 15mm thick plaster in cement mortar(1:4) on fair faces of brick work or concete surfaces, finished even and smooth without suing extra cement complete all as specified and directed.
M&L applying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt esistance exterior paint of required shade (company depot Tinted) with silicon additives @ 1.43 Litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over and including plaster of paris putty of 1mm thickness over plastered surfeces to prepare the surface even and smooth.complete all as specified and directed.
M&L roof tiles, manglore pattern,interlocking at side joints,laid dry, complete all as specified and directed.
M&L ridge or hip tiles tosuit mangalore pattern of roofing tiles,bedded and jointed in cement mortar 1:3 , complete all as specified and directed.
M&L finished walls with textured exterior paint of required shade:new work (two or more coat applied @3.28 ltr/10sqm over and including priming coat of exterior primer applied @2.20kg/10 sqm including writing letter,painting. etc complete all as specified and directed.
S&F buffed stainless steel pipe/drum (matt finished) of grade SS 304 fixed with anchore fastener including bearing etc (size as decided by GE) ,welding etc including writing letter,painting/printing sketch. etc complete all as specified and directed. Note;-contractor are requested to see drawing /sketch from AGE B/R-I during working hours.
SCHEDULE 'A' PART-II:- Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed.
Point wiring with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.
All as per the description of Serial item No 47 here-in-before but for 5 pin socket outlet 6 amp same board complete all as specified and directed.
All as per the description of Serial item No 47 here-in-before but for 5 pin socket outlet 16 amp independent board with cable of size 2.5 sqmm in point wiring and 2.5 sqmm in continuous earth wire in casing caping complete all as specified and directed.
S&F switch piano flush type single pole one way, 6 Amps, complete all as specified and directed.
S&F switch piano flush type single pole one way, 16 Amps, complete all as specified and directed.
S&F socket out let 2 in 1, 3/5 Pin 6 Amps flush type all as specified and directed.
S&F socket outlet 5 pin,6and 16 Amp, flush type universal complete all as Specified.
S&F ceiling rose surface type bakelite 50x65 mm two to three terminals all as specified.
S&F surface/wall mounted light fitting pre wired suitable for single T8 LED fitting along with one number LED tube rod in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put- 2100 lm, Colour Temp- 6500 Kelvin, Size & Length - G13/T8/4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of sze 23/0.0076 complete all as specified and directed. Make:- Cart Part No. for tube light fitting;- STREAKT8UPTO 1X22WSGBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved. Cat Part No for Tube rod:- PHOTANULTRAE2.0 1213T8SSTL18W LED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LEDtube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved.
Taking down main switches, distribution board, sheet metal enclosure with MCB's any way and any rating including wooden board or steel board and making good the disturbed surfaces complete all as specified and directed.
S&F sheet metal enclosures distribution board single pole and neutral, 8 way with 200 Amps rated bus bar 240 V, metallic double door IP-42/43 protection complete all as specified and directed.
S&F MCB SP, 6 to 32 Amps, 230 Volts 10 KA, 'B' series complete all as specified and directed.
S&F MCB SPN 32 Amps 10 KA 230 volts 'B' series complete all as specified and directed.
M/s Sai Construction
BHARDWAJ BUILDERS
M/S ER CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .