Supply and delivery of 20HP & 25HP Squirrel Cage Induction motors and suitable starters at water supply boosters for standby motors and supply of sluice valves, Non-Return valves for maintenance of ELSR filling Boosters in Works Division-II area for

Supply and Fixing of Kirloskar make 18.5KW /25HP/1440RPM Squrrel Cage Induction Motor, 440V AC Supply, 50HZ , Three Phase Class F- insulation Foot Mounted, Crompton make including cost and conveyance of all materials and transportation etc., complete and as directed by the departmental authorities. For 25HP Motor

Supply and delivery of Kirloskar make 20 HP / 15 KW / 1450 rpm with TEFC enclosure 3-phase 415v Induction motor with S.C. 180M frame size suitable to run for the above pump etc., with trail run and as directed by the departmental authorities. For 20HP Motor

Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With SS enclosure comprising of contactor with bi-metalic relay with necessary push buttons, etc., complete suitable for up to 3 HP Makes: As per list of recommended brands. (MAT-03716)

Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz..enclosed with no volt coil and overload protection with necessary materials, etc., complete. Makes: As per list of recommended brands.

Upto 3HP (MAT-03717)

5 to 7.5HP (MAT-03718)

10HP (MAT-03719)

Supply and delivery of 80mm GI Pipe 'B' class including cost and conveyance of all materials etc., complete. (MAT-00038)

Supply and delivery of 80mm GI Couplings including cost and conveyance of all materials etc., complete.

Supply and fixing of 3'' x 3' long size clamp sets including cost and conveyance of all materials etc., complete and as directed by the departmental authorities.

Supply and Delivery of Chain Wrenches including cost and conveyance of all materials etc., complete.

18" Chain Wrench (Taparia)

24" Chain Wrench (Taparia)

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.

150mm dia PN 1.6 (MAT-08070)

200mm dia PN 1.6 (MAT-08071)

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.

150mm dia PN 1.6 (MAT-08048)

200mm dia PN 1.6 (MAT-08049)

Cost of MS Flanges incuding bolts, nuts, Rubber packing etc., complete and flange thickness conforming to IS:7322-1985 and flange dimensions conforming to IS:1538-1993 exculding cost of MS Specials including cost and conveyance to site etc., complete.

150mm dia x 15mm thick (MAT-06413)

200mm dia x 15mm thick (MAT-06414)