Repair / replacement to floor joinery walls tiles sanitary / water supply fittings and allied repair works in Zone VI under AGE B/R-I at GE WEST Bareilly

Amount

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

Material & labour for brick work with fly ash bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n.exc 4 sqm each and removing from site complete all as specified and directed.

All as per Item No.4 above but area n.exc.1.5 Sqm each complete all as specified and directed.

Taking down shutter of any description area exc. 1 Sqm but n.exc.2 Sqm each and removing from site complete all as specified and directed.

All as per Item No. 6 above but area n.exc.1.0 Sqm each complete all as specified and directed.

S & F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. Note : 10mm deformed bar shall be provided in bottom portion in each frame. The rate for the same is included in rate quoted against this item.

M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply & fix 30mm thick flush shutter solid coreconstruction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fix 35mm thick 2nd class hard wood (Sal) plain, framed, parelleled shutters (any number of panels) with panells of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers complete all as specified and directed.

Supply & fix 35mm thick 2nd class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc, without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I section 8 supplied and fitted to chowkhats complete all as specified and directed.

S & F of 100 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F of 140 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Taking down old steel window with side hung shutters incl. projecting or box type hinges, steel handle and steel peg stay and refixing in same opening after necessary repair, welding and replacing damaged / missing part and making good dismantled portion of walls incl. PCC bed block and rendering on jambs / cill / soffit etc. complete all as specified and directed.

Supply & fix steel windows with side hung shutters incl box type hinges, steel handle and steel peg stay complete with glazing bar, dovetailed or welded including taking down old window complete all as specified and directed.

Supply & fix steel ventilator with top/side hung shutter including hinges, steel peg stay including taking taking down old ventilator complete all as specified and directed.

Supply & fixing mild steel framed work such as grills,ladder flat iron grating,gauge etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde E-165 complete all as specified & directed.

Material & labour for factory made steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as specified and directed. Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongry as required (iii) Guard bars glazing & wire mesh shall however be measured & paid for separately under respective items of Sch ‘A’ complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Material & labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

All as per Item No. 24 above but fixed in repairs complete all as specified and directed.

Supply & fix mild steel frame consisting of wire cloth, 0.50mm nominal dia of wire and average width of aperture 1.18mm fixed on steel frame made up of MS flat iron 20x3mm thick after drilling out old ribates and flat iron strips and replacing with new 20 x 3 mm F.I. strips and new rebbets incl. necessary welding and painting of fillets to match with existing work as directed at site. and fixed with stainless wire staples fixed as in repairs in wooden frames complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.

Supply & fix butt hinges stainless steel 100mm with screw complete all as specified and directed.

Supply & fix rubber beading for doors of required size complete all as specified and directed.

Supply & Fix 0.50 mm thick plain, aluminium sheeting, alloy 31000 H4 in drip and straight flashing on doors complete all as specified and directed.

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for rendering 5 mm thick in CM 1:3 on ceiling and finished surface even and smooth complete all as specified and directed.

Material & labour for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L preparation of walls and applying two coats of oil bound distemper over one coat of primer after finishing the wall surfaces with JK/Birla wall care putty to achive smooth finish complete all as specified and directed

Material & labour for preparing old/newly plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

M & L for Preparation of old plastered or unplastered surface of walls and applying one coat of white wash on wall complete all as specified and directed.

M & L for Preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash on wall complete all as specified and directed.

M & L for Preparation of old decorated surface of wall by washing, scrubbing down, stopping and applying two coat of oil bound distemper complete all as specified and directed.

M & L for Preparation of old decorated surface of wall by washing, scrubbing down, stopping and applying two coat of cement based paint using mechanical apliances complete all as specified and directed.

Material & labour for Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces complete all as specified and directed.

M & L for Preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old painted surface of steel of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor, laid in panels including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar complete all as specified and directed.

M & L for vitrified ceramic coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 10mm thick screed in CM 1:6 and all as per manufacturer's instruction complete all as specified and directed.

Supply & fix Glazed ceramic tiles (any shade) of size 450x350x7 mm thick / 350X250X7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces as in dado/skirting including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for 18 – 20 mm thick machine cut granite stone of any shade slab as in floor, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing rounding to exposed edges and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for 18 – 20 mm thick machine cut 'Z' black granite stone slab as in floor, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing rounding to exposed edges and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for 18 – 20 mm thick machine cut 'Z' black granite stone slab as in skirting / dado, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing rounding to exposed edges and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & labour for 25 mm thick PCC 1:2:4 - B0 (using 12.5 mm graded stone aggregate) as in floor finished surface fair and even complete all as specified and directed.

Supply & fix 25mm dia MS fancy type vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports & rings etc complete all as specified and directed.

Supply & fix in repair vitreous china squatting pan "Orrissa" pattern of size 580X440mm white with integral footrests excluding flushing cistern including connection to trap and cistern, flush pipe and making good disturbed surface of floor complete all as specified and directed.

Supply & fix vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor, fixed as in repair complete all as specified and directed. by GE/Engineer-in-charge.

S & F in repair PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc making all connection and making good disturbed surface complete all as specified and directed.

S & F of 15 mm bore fancy type, chromium plated stop valve, with long shank and cup (Concealed Type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F of 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

Supply & fix vitreous china wash basin white flat back type of size 550 x 400mm including cutting for and pinning in ends of brackets as in repair and 32mm dia chromium plated waste coupling complete all as specified and directed by GE/Engineer-in-charge.

Supply & fix in repair kitchen sinks made of stainless steel 0.80mm thick with plug, washer and waste including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, over all size1140mm x 510mm and bowl size 560mm x 405mm complete fixed all as specified.

Supply & fix superior quality CP brass tubular towel rail 20mm dia, D type, 60 cm long between flanges fixed as in repair complete all as specified and directed.

Supply & fix in repairs, 15mm dia CP bib taps of superior quality with long body cast copper alloy with crutch or butterfly handle screwed for iron pipe fixed complete all as specified and directed.

Supply & fix 15mm dia, in repairs, pillar taps of superior quality cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screws for iron pipe fixed complete all as specified and directed.

Supply & fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting exc. 10 cm & not exc. 20 cm in girth complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore including cleaning for refixing or removal from the site complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore including cleaning for refixing or removal from the site complete all as specified and directed.

Supply & fix GI tubing 15 mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor complete all as specified and directed.

Supply & fix GI tubing 20 mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes for exc 250 & n exc 500 ltr capacity including writing date and year of cleaning of height not less than 50mm and width not less than 20mm on plain base with synthetic enamel paint etc complete all as specified and directed.

All as per Item No. 77 above but exc 500 ltr and n.exc. 1000 ltr capacity complete all as specified and directed.

Dismantling existing water tanks capacity exc. 250 ltrs but n exc. 500 ltrs, removing from site complete all as specified and directed.

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in position complete all as specified and directed.

Supply & fix ball valve 20mm dia high pressure PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minium weight 20mm - 210 gms complete all as specified and directed.

Material & Labour for 75 mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (40 mm stone agg) as in Sub base finishing cement concrete finished even and smooth without using extra cement complete all as specified & directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 complete all as specified and directed

M & L for 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over sand cushioning complete all as specified and directed.

Note :- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

M/S SAJJAD HUSSAIN CONTRACTOR

hardeep singh enterprises

JAI SRI RAM ASSOCIATE

M/S YASHCON CONSTRUCTIONS

VISHAL CONSTRUCTIONS

REHAN CONSTRUCTIONS

M/S Harshri Nath Enterprises

M/S Shree Sai Builders

vipul nagaich

M/S VIRAT CONSTRUCTION