APCRDA Funds

Construction of Building Ground Floor

Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with Sand filling foundation in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental, labour charges,hire charges of T&P etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, for finished item of work. (APSS No. 402) Bed Concrete for Footings & for flooring

Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, for finished item of work. (APSS No. 402)

Providing Thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit, but excluding GST charges etc., complete for finished item of work.( APSS No.126)

Providing Mild steel bars as per IS 1786 -1979 of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of mild steel bars, including all wastages such as overlaps. cost and conveyance of binding wire, cover blcoks and all incidental, operational labour charges such as cutting, bending , placing in position, tying including statges and other taxes on all materials etc., complete including over head charges & contractor profit, but excluding GST charges etc., complete for finished item of work in all floors (APSS No.126)

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Footings

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Pedestals

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for columns

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Plinth beam

Brick masonry walls in superstructure with CM (1:6) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, constructing masonry, lift charges, curing, etc.,and including over head charges contractor profit but excluding GST & Seigniorage charges etc., complete for finished item of work. (APSS No. 501 & 504) for Basement

Brick masonry walls in superstructure with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and including over head charges contractor profit but excluding GST & Seigniorage charges etc., complete for finished item of work. (APSS No. 501 & 504) for Super Structure

Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:6) prop. (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., but excluding cost of steel and its fabrication charges complete and including over head charges contractor profit but excluding GST & Seigniorage charges etc..complete for finished item of work. (APSS No. of 501 & 509)

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Lintels.

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) for Sunshades

Reinforced cement concrete M 20 Nominal mix using 12 mm size hard granite machine crushed grded metal ( coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 330 Kgs of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2/0.8 cum) capacity including cost and conveyance of all materials like cement fine aggregte (Sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., and including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403 ) for sill slabs.

Plain Cement concrete (1:3:6) using 20 mm HBG graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 - Part 1 to Part 8) from approved quarry uing concrete Mixer 10 / 7 cft (0.2 /0.8 cum) capacity including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site including machine mixing charges and curing charges, lift charges and centring charges and including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work . (APSS No. 402) for Bed blcoks

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Roof Beams.

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Roof Slab 150 mm thick.

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Waist slab of 225 mm thick

Ornamental plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work.(SS 901,903 & 904) for Ceiling plastering

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work. (SS 901,903 & 904) For Buildig Out side walls

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work. (SS 901,903 & 904) for Internal walls

Painting to New walls and ceiling in with Plastic Emulsion pains Asian / Berger /Nerolac or equivelent and shaded over two coats water based cement primer of interior grade II and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for external walls in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials,Labour charges cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing and including over head charges & contractor profit, but excluding GST charges etc., complete for finished item of work in all floors for Internal Wall

Painting to New walls and ceiling in with Plastic Emulsion pains Asian / Berger /Nerolac or equivelent and shaded over two coats water based cement primer of interior grade II and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for external walls in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials,Labour charges cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing and including over head charges & contractor profit, but excluding GST charges etc., complete for finished item of work in all floors for External Wall

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc. complete for finished item of work. (APSS No.701 & 707) for all Rooms.

Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work.(APSS No.701 &707)

Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc. complete for finished item of work. in Toilets

Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc. complete for finished item of work. (APSS No.701 & 707)

Supply and fixing of Medium Teak wood Door double shutter fully panelled door of size 1.50 x 2.40 mt with frame made of well seasoned Teak Wood scantlings of size 125 x 75mm & 38x75 mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and panels - 8 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long brass aldrop-1 no,300 long brass latch,125mm long butt hinges 8No's, Brass Door stoppers-2 no, 200mm long Tower bolts - 2no's brass, brass fancy handles 200mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges, over heads and contractor's profit etc., complete but excluding GST charges as per specifications (APSS NO.1001 & 1002) .

Supply and fixing of Sal Wood Flush Door of size 0.90 X 2.10mts, with frame made of Sal wood scantlings of size 100 x 75mm & 38x 75 mm including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges, over heads and contractor's profit etc., complete but excluding GST charges as per specifications (APSS NO.1001 & 1002)

Supply and fixing of Sal Wood Flush Door of size 0.75 X 2.1 0mts ,with frame made of Sal wood scantlings of size 100 x 75mm & 38x 75 mm including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges, over heads and contractor's profit etc., complete but excluding GST charges as per specifications (APSS NO.1001 & 1002)

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Three track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension including cost and conveyance of all materials and labour charges, over heads and contractor's profit etc., complete but excluding GST charges as per specifications

Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch, overheads and contractors profit etc., complete for finished item of work in all floors including cost and conveyance of all materials and labour charges, over heads and contractor's profit etc., complete but excluding GST charges as per specifications.

Providing Thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit, but excluding GST charges etc., complete for finished item of work.( APSS No.126)

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for columns in First floor

Brick masonry walls in superstructure with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and including over head charges contractor profit but excluding GST & Seigniorage charges etc., complete for finished item of work. (APSS No. 501 & 504) for Super Structure

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Lintels First floor

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) for Sunshades

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Roof Beams First floor

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Roof Slab 150 mm thick in in First floor

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Waist slab of 225 mm thick in First floor

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work. (APSS No. 901 & 903) over First Floor Roof Slabs

Ornamental plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work.(SS 901,903 & 904) for Ceiling plastering

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work. (SS 901,903 & 904) for Internal walls

Supply and fixing of Medium Teak wood Door double shutter fully panelled door of size 1.50 x 2.40 mt with frame made of well seasoned Teak Wood scantlings of size 125 x 75mm & 38x75 mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and panels - 8 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long brass aldrop-1 no,300 long brass latch,125mm long butt hinges 8No's, Brass Door stoppers-2 no, 200mm long Tower bolts - 2no's brass, brass fancy handles 200mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges, over heads and contractor's profit etc., complete but excluding GST charges as per specifications (APSS NO.1001 & 1002) .

Supply and fixing of Sal Wood Flush Door of size 0.90 X 2.10mts, with frame made of Sal wood scantlings of size 100 x 75mm & 38x 75 mm including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges, over heads and contractor's profit etc., complete but excluding GST charges as per specifications (APSS NO.1001 & 1002)

(No.of items 47 (Forty seven) only