CWE KOTA/PLN-77 OF 2019-20 SPECIAL REPAIR TO BUILDINGNO P-39AND P-40 OF OR MD ACCN UNDER AGE I PILANI

Amount

B/R PORTION. Taking down cement plaster any description, on brick, PCC block or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as specified and directed.

Demolition of cement (un-reinforced) concrete in any description and position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material complete all as directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Dismantling boarding any description, fixed any position with nails, complete all as specified and directed.

Dismantling water tank of capacity exceeding 250 Ltrs but not exceeding 500 Ltrs and removal from site complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. .

Demolition of RCC Jalies and connected works on building shaft etc. all any height and making good it with necessary treatments, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. pointed in any mortar complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed :-

15mm bore.

20mm bore.

25mm bore.

32mm bore.

Dismantling of cement concrete tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition and breaking up drain pipe of 100mm dia (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including PCC bedding and haunching etc complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and directed. Make :- URP Pidiproof of Dr. Fixit or equivalent.

S & F 30mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid for separately.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.

S&F 19/20mm thick block board grade-1 quality exterior grade decorative veneer on both faces and alround covered with 6mm thick teak wood beading/lipping fixed with screwed to timber frame complete all as specified and directed.

Refixing shutters of any description exc 1 sqm and n exc. 2 sqm each in same opening, complete all as specified and directed.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as applicable to item 08095 given in SSR Part - II (2010) complete all as specified and directed.

S & F Factory made solid PVC moulded door shutter, 28 to 30 mm thick (style), with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as all as per specifications and drawings as applicable to item 08101 & 08102 given in SSR Part – II, complete all as specified and directed.

M & L for preparation of old surfaces or unplastered decoarated surfaces of ceiling and applying one coat of distemper oil emulsion of any tint complete all as specified and directed.

M & L for praration of old surfaces of walls and applying one coat of distemper oil emulsion of any tint complete all as specified and directed.

M&L for preparation of newly plastered surfaces on ceiling and applying two coats of Oil Bound Distemper over a one coat of priming paint on new ceiling surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall and applying two coats of Oil Bound Distemper over a one coat of priming paint on new wall surfaces complete all as specified and directed.

M & L for 1mm thick wall care putty complete all as specified and directed. Make. Birla White/Bison wall putty of Berger/Nerolac wall putty/ Asian Paint powder putty.

M&L for complete removal of existing treatment on surfaces of walls, including cleaning of any mortar drops, fungus efflorescent salts etc and applying two coats of oil bound distemper over a coat of priming paint on wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of water based anti fungal exterior emulsion over coat of priming paint complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description and applying one coat of synthetic enamel complete all as specified and directed.

M&L preparation of newly wooden surfaces of any description and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L for preparation old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-1 using 20 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 2 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in back filling to pressed steel chowkhats, complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in coving in sunken portion of slab and like including necessary form work complete all as specified and directed.

M&L PCC 1:5:10 type E-2 using 40mm graded stone aggregate in foundation, filling and mass concrete in sunken portion of slab etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate in sub base of floor complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 using 12.5mm graded stone aggregate finished and even in floor complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or cement surface in CM 1:6 finished even and fair complete all as specified and directed.

M&L rendering 5 mm thick on fair faces of brick work or cement surface in CM 1:3 finished even and fair complete all as specified and directed.

M&L rendering 15mm thick on brick surfaces or concrete surfaces cement mortar 1:4 mixed WPC finished even and smooth complete all as specified and directed. (Note :- Supply only WPC shall be measured and paid separately)

M & L for priming surfaces and applying bitumen felt water proofing treatment, normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2, ISI marked(IS:7193-1994), complete all as specified and directed.

S&F GI tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

15mm bore.

20mm bore.

25mm bore.

32mm bore.

S & F in repair Cast iron soil, waste and vent pipes (spun pipes), 100mm bore of pipe, in any length with or without ears, with cement joints, laid in trenches or in floors but fixed to wall and tested complete all as specified and directed.

S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed. (Note : PVC tanks shall be ISI marked and having two layers)

S & F in repair Cast iron floor trap 100mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S & F in repairs 100mm bore bends cast iron of any radius with dimenshing pieces or taper (larger bore measured), complete all as specified and directed.

S&F 100mm bore cast iron branch pieces, single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch complete all as specified and directed.

S & F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F in repairs Brass Hat and coat hooks, solid body of size 175mm to 250mm complete all as specified and directed.

S & F aluminium Hasp and staples 100mm plate type, complete all as specified and directed.

S&F continuous (Piano) hinges width of flaps (when open) 40mm, MS, bright finish or electro galvanised complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F 75mm long MS butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100mm long MS butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F 300mm long aluminium anodised barrel tower bolt of extruded section ISI marked complete all as specified and directed.

S & F 125mmx60mm size pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S & F 150mm size extruded aluminium alloy handles fabricated type anodized ISI marked complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for matt finish, joint free light coloured ceramic tiles (Premium quality) of size 600x600x8-9mm thick in floor etc. bedded over screed bed 15mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for matt finish, joint less light coloured vitrified ceramic tiles 10mm thick (Premium quality) of size 600x600x8-9mm thick on vertical surfaces such as dado, skirting etc., bedded over and including rendering 10mm thick in CM 1:3 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over rendering complete all as specified and directed.

M&L for matt finish, joint free light coloured ceramic tiles (Premium quality) of size 300x300x7-8mm thick in floor etc. bedded over screed bed 15mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for matt finish, joint less light coloured vitrified ceramic tiles 10mm thick (Premium quality) of size 300x450x, 300x600mmx7-8mm thick on vertical surfaces such as dado, skirting etc., beded over and including rendering screed bed 10mm thick in CM 1:3 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over rendering complete all as specified and directed.

M & L for providing kitchen cabinet in required sizes at site made out of 18mm thick one side decorative lamination and other side balancing lamination sheet consisting of carcass 18mm thick PVC sheet & provision of shutters made out of 18mm thick one side decorative lamination PVC sheet all required brackets 5.5 screws etc., the panel shall be fabricated using adhesive and srews where ever required all the edges shal be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as per drawing and specifications approved, complete all as specified and directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L 20 mm thick granite slab/tiles (of any type table rubbed and polished) in steps jambs pillars, window cills, cooking platforms over screed bedding layer of mortar 10mm thick in cement mortar 1:3 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repair vitreous china wash basin, with pedestal white, flat back, size 600 x 480 mm including including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S & F in repairs tabular towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (mimimum weight 170 gms), complete all as directed.

S & F in repair bib taps 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of for complete all as specified and directed.

S & F in repairs concealed type Cast Copper alloy, Chromium plated fancy type, 15 mm bore angular stop valve with wall flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs CP wall mixer, single lever type complete all as specified and directed.

S & F in repairs chromium plated shower roses with or without swivel joints of any size, including swivel shower of PTMT any colour and shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour fixing to steel pipe or union, complete all as specified and directed.

S & F in repairs PVC connection 15mm dia 450mm long with chromium plated check nut and washer etc complete all as specified and directed.

S & F in repairs brass PVC connection 15mm dia 450mm long with chromium plated check nut and washer etc complete all as specified and directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed.

M & L cutting and punning in brick walls for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed.

S&F in repair vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe etc) including making good to floor complete all as specified and directed.

S&F in repair CP waste coupling 32mm size full thread with 80mm height, complete all as specified and directed.

M&L for in repairs gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm dia complete all as specified and directed.

M&L for in repairs gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia complete all as specified and directed.

M&L for in repairs gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 32mm dia complete all as specified and directed.

S & F in repairs CP Soap Dish of any type fixed to plugs with cromium plated brass screws complete all as specified and directed.

S&F decorative curtain rod, 20mm to 40mm dia polished, moulded, cut to required length including decorative moulded edge clamp with necesary pin as required and intermediate clamp (where required) including taking down existing complete all as specified and directed.

S & F in repair ball valve high pressure of PTMT suitable for 20mm bore pipe (minimum weight -210Gm) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

E/M PORTION Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including teak wood battens or from existing conduits with all fittings, such as switches, ceiling rose, pendants, sockets, lamp holder, fan regulators, sketch/brackets light fittings etc but excluding ceiling fan and removal of old material from site and making good disturbed surfaces of walls, floors ceiling etc to match with existing surfaces, complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC rigid non metallic conduit and conduit accessories concealed in walls/ceiling/floors with sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers at every turning point all as per IS including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable (green colour) as earth continuity conductor to common earth & connecting to earth dolly for the following :- Notes : (i) The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces. (ii) Ceiling rose, light fittings, switches, sockets, regulators, bell push etc shall be measured and paid separately under respective items of BOQ.

One light/fan point controlled by one switch.

One Multi 5 pin, 5 Amp socket outlet on independent board.

One Multi 5 pin, 5 Amp socket outlet on same board.

M & L for point wiring complete for 6 pin 15 Amps socket outlet on independent board with 4.0 Sqmm single core multistranded copper conductor of 1100 volts gradePVC insulated and unsheathed FRLS cable through and including PVC rigid non metallic conduit and conduit accessories concealed in walls/ceiling/floors with sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers at every turning point all as per IS including 4.0 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable (green colour) as earth continuity conductor to common earth & connecting to earth dolly Notes : (i) The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces. (ii) Switches, sockets etc.shall be measured and paid separately under respective items of BOQ.

S & F switch piano flush type 5 Amps single pole one way 230 volts including taking down onld unservceiable one complete all as specified and directed.

S&F, switch socket combination two-in-one, 5 pin, 5 Amp 230 volt multi pin flush type universal complete all as specified and directed.

Supply and fix in repair LED tube light fitting 1x20 Watt 230 Volt 4 feet T-5 LED batten ingrated type aluminium extruded etc complete with all accessories internally pre-wired and including fixing the fitting on wall / ceiling with suitable PVC round block -02 Nos, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make - C &S Cat Part No : LTTB4F20WLED/W or equivalent as specified in appendix ' D'.

Supply and fix in repair LED tube light fitting 1x10 Watt 230 Volt 2 feet T-5 LED batten ingrated type aluminium extruded etc complete with all accessories internally pre-wired and including fixing the fitting on wall / ceiling with suitable PVC round block -02 Nos, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed by Engineer-in-Charge. Make - C &S Cat Part No : LTTB4F10WLED/W equivalent as specified in appendix ' D'

S & F in repair LED decorative wall light fixture madeup of polycarbonate, suitable upto 1x12 watt LED lamp, spiral/B 22 base complete all as specified and directed. Make : Cat Part No LHFOFTE1TZ1W012 of make Havells or equivalent model as specified in Appendix 'D'.

S & F in repair LED lamp 10 watt sutiable for decorative wall light fixture complete all as specified and directed. Make : Cat Part No LHLDERUEMD8X010 of make Havells or equivalent model as specified in Appendix 'D'.

S & F lamp holder, PVC / polycarbonate insulated body type 240 volts with back plate suitable for batten fittings complete all as specified and directed.

S & F fan regulator electronic stepper type 100-200W, 230V, AC 50 Hz, complete all as specified and directed.

S & F Call bell ding dong type, including taking down old unserviceable one, complete all as specified and directed.

S & F in repair bell push, flush type, 5 Amps including taking down old unserviceable one, complete all as specified and directed.

S & F switch piano flush button socket combination outlet 2 in 1, 6 pin, flush piano type universal 15 Amps controlled by one switch including taking old unsv one, complete all as specified and directed.

S & F ceiling rose, three terminal, PVC / polycarbonate insulated body, 240 volt, ISI marked complete all as specified and directed.

m/s nemichand contractor

Pioneer Enterprises