CA NO.CWE BLY/GE (W) /77 OF 2023- 2024 REPAIR/REPLACEMENT OF WALL PANELLING, FALSE CEILING WORK, SANITARY FITTINGS WORKS, TILING WORKS AND CERTAIN MISC B/R WORKS IN ZONE VI AND ZONE VII UNDER AGE B/R-1 AT GE (WEST) BAREILLY

Amount

Demolition cement concrete(un reinforced)in ground floor and packing n exc 15 cm thickness (bellow or above ground level) complete all as specified and directed.

Taking down cement plaster from brick wall including racking out joints hacking for key and scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering on brick work or concrete surface in CM 1:6 finishing the surface fair & even complete all as specified and directed.

M&L for rendering 5 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cementcomplete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surfaces as on ceiling applying two coats white wash complete all as specified and directed.

Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over & including a coat of white cement wash complete all as specified and directed.

Preparing plastered or unplastered surfaces of walls and applying one coats of cement base paint white or tinted over & including a coat of white cement wash complete all as specified and directed.

M&L for preparation of plastered old surfaces of walls and applying two coats of distemper (washable) oil emulsion paint on wallscomplete all as specified and directed.

M & L PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) including demolition of brick work in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete , using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Add or deducted for each 25mm grith or part thereof over or under 30cm complete all as specified and directed.

S & F for Vitrous china squating pan orissa pattern size 580 x 440 mm white with integrat foot rest fixed in repairs including provision of lime concrete bedding complete all as specified and directed.

S & F for Vitrous china wash hand Basin white flat back size 550 x 400 mm including bracket and cutting for and pinning in ends of brackets, fixed in repair complete all as specified and directed.

S & F in repair 15 mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed for 15 mm dia pipe complete all as specified and directed.

S&F PVC connections 15 mm Size with brass check nuts of length 450 mm complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 Ltr capacity, white with all fittings and fixtures including brackets and 32 mm bore PVC flush pipe complete all as specified and directed.

S&F Chomium plated shower roses 75 mm size in repair with or without swivel joints any size including fixing to steel pipe or unoincomplete all as specified and directed.

S & F in repair bib tap cost copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule in 15 mm bore complete all as specified and directed.

S & F in repair stop volve cast copper alloy screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipe or for unions, 15 mm dia of pipe complete all as specified and directed.

S&F in repair angle valve cock CP in repair fancy type half /full turn 15mm bore flanges complete all as specified and directed approved by Engr-in-Charge

S & F Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including S & F cantiliver bracket of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet pan pedestal pattern white (excl fixing bolt flushing cistern and flush pipe ) fixed in repairs complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S & F in repair 32 mm waste fittings/coupling of CP WHB ,Sink complete all as specified and directed.

Dismantling & breaking up drains pipes 100 / 75 mm (Saltglaged ware ,AC,PVC) Set in cement mortar complete all as specified and directed.

S & F in repair PVC (SWR) pipes double socketed in any length with rubber Ring joints fixed to walls 110 mm bore fixed complete all as specified and directed.

All as per Item No above but 75 mm bore complete complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius 110 mm bore fixed complete all as specified and directed.

All as per item No above but 75 mm bore complete all as specified and directed.

S & F in repair PVC (SWR) juntion single T equal or uneqoal 110 mm bore fixed complete all as specified and directed.

S & F in repair PVC (SWR) juntion single T equal or uneqoal 75mm bore fixed complete all as specified and directed.

S & F in repair PVC (SWR) vent cowl 110 mm bore fixed complete all as specified and directed.

Taking down WC including trap ,dismantling of existing floor of WC and removal of PCC or Cinder etc from sunken floor of toilet exc 1.00 sqm & n.exc 2.00sqm Taking down plaster from wall of sunken floor including racking out joints hecking for key ,scrubbing with water etc & M& L for 20 mm thick rendering in CM 1:4 finished even & smooth using extra cement as bearing coat .M&L for 25 mm dia GI Pipe(0.45 mtr ) fixed to wall in sunken floors including cuttings holes & making good disturbed surface complete all as specified and directed.

Cleaning the sunken floor surfaces by wire brushes removing dust and applying following operation :- (a) Applying priming coat with bituminous primerconfirming to IS 3384. 1986 @ 0.5 Kg/Sqm (b) Applying a coat of hot bitumen grade 85/25 @ 1.20 Kg/Sqm confirming to Is -705-1998 for water proofing membrance (c) Applying of polymeric water proofing membrane weighting not less than 3 Kg/Sqm over entire area with overlapping and sealed. (d) Again Applyingtack coat of hot blown bitumen grade 85/25 @ 1.2 Kg/Sqm.over water proofing membrance (e) Spreading Dry sand @ 0.75 Kg/Sqm dusted over the bitemen indicated at (d) above

M $& L for PCC (1:5:10) type E-2, using 40mm graded BRICK aggregate for filling up sunken floor over felt complete all as specified and directed.

S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F in repair Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. Note :- Bldgs hight is upto five storey neccessary scaffolding will be included in cost of items

M&L for preparation of old wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including Powder coated Aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

S&F Prelam PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more thant 200 mm. The strips shall be fixed to wall vertically at an equal interval of 10" between two PVC strips. A strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be stuck at the places where two panels are jointed, using solvent cement and including taking down existing PVC wall paneling complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of wall/roof/Chajja projections including facia, cornices including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and etc and applying one coat of weather proof exterior emulsion paint over 2mm th wallcare putty upto five story building with necessary scafolding complete all as specified and directed. Note- Emulsion to be carried out through air less spray machine ( Mechanical means), Shade and coloured as approved by Engr-in-Charge.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of oil bound distemper with roller over 2 mm th wall care putty of approved shade/tint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of white wash complete all as specified and directed.

M&L for two coats of birla white putty or JK wall putty avg 3mm thick with smooth finish by sand papering to achieve smooth surfaces complete all as specified and directed.

M&L for Vitrified designer tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15 mm thick screed bed in cm 1:6 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for Vitrified designer tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in CM 1:4 including dismentling existing tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, 600x300 mm size, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in CM 1:4 including dismentling existing tiles complete all as specified and as directed by Engineer-in-Charge.

M & L for non- skid designer ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of existing old floor or wall tiling and 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair 20 mm dia Stainless steel drappery curtain Rod with bracket and lattu and other connceted accessories etc complete all as specified and directed

S&F in repairs to CP Brass jet spray for EWC complete all as spd and directed Make -Jaguar, Cera, Hindware

S&F in repairs to CP Brass Health faucet with 1 mtr tube with wall hook complete all as spd and directed Make -Jaguar, Cera, Hindware

Repairing of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down & refixing (if required) for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed by Engr-in-charge.

Dismantling of plaster of paris ceiling (Gypsum anhydrous) to flat surface including framework and G.I. wire mesh complete all as specified and directed.

M&L POP (Plaster of Paris) designer false ceiling applying 10 to 12 mm thick POP finish over ceiling surfaces with wall care putty mixed with POP powder in ratio of 1:10 (a) PGI sheet of 26 gauge in angle shape of size 25 x 25 mm all around the wall complete. (b) Main runners of 26 gauge PGI sheet in angle shape of size 35 x 25 mm at the interval of 90 cm centre to centre complete. complete including one dome not less than 1 metre dia and frame work complete all as described below : (c) Cross runners of 26 gauge PGI sheet in angle shape of size 35 x 25 mm at 40 cm center to center complete. (d) Suspender/ hanger of 26 gauge of PGI sheets in angle shape of size 25 x 25 mm fixed to soffits of roof by steel fastener complete.

M & L for Making POP cornices 75/100 mm wide of required design as directed by Engineer-in-charge.

M & L for Making POP Dome design( dia exc 90 cm but n.exc 120 cm) of required design as directed by Engineer-in-charge.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed.

S & F Powder coated aluminium frame for doors, windows, ventilators, Partition with one or more rebates including joining cleat for fixing etc with powder coated complete all as specified and directed.

S&F Aluminium section powder coated of colour as approved doors frame and shutters partly with 4.8 mm thick reflective glass and partly closed with 5 mm thick aluminium composite panel (alco panel) fixed with aluminium chamfered clip section no 4407 of aluminium door sections as under. (a) Frame 100x40x2mm section No-2420 (b) Shutter style 85x44.45x1.7mm thick section 4546 (i) Top rail 14.30x44.45x1.7mm thick section 4553 (ii) Middle rail 83.50x44.45x1.7mm thick section 4565 (iii) Bottom rail 114.30x44.45x1.7mm thick section 4529 (iv) glazing clip powder coated 0.7mm thick section no 4407 (v) Handle stainless steel 300mm long as approved (vi) Tower bolt powder coated 9.90 mm dia & 200mm long section No 4002 (vii) Mortice lock 100mm 7 lever all as directed of Godrej make (ix) Rubber gasket white PVC (x) Namda rope to be fixed in the styles's groove for proper air tightness. (xi) Top guide rail to be provided as per requirment to withstand adequate load of shutter to be installed at site for easy movement of shutter.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for sliding windows including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary fitting , filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws ,bow handles , tower bolt locking arrangement etc all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F Anodised powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ tainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,including Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all complete as per requirement and direction of Engineer-in-charge.

M& L for Double action floor spring hydraulically regulated made up of inimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc. complete all as spd and directed

S&F 5 mm Aluminium composit panel of approved colour fixed to frame work or door etc complete all as spd and directed.

S&F Sheet glass black tinted /reflective 5.5 mm thick (of any tint) or fixed and complete all as specified and directed

M&L providing BRAND FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge

M&L in providing 30 mm thick brand factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

M & L for machine cut kota stone slab flooring 20-25 mm thick over and including 15mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L for machine cut kota stone 20-25 mm thick slab for skirting, dado, riser etc over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick granite (black) stone for floor, steps, jambs, pillars, window cills, cooking platform and like machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in CM 1:6 complete all as specified and directed.

S & F In repair urinal partition rectangular shaped with frosted glass of size 900mm x450 m x 10mm thick complete all as specified and directed.

S & F In repair Vitreous China bowl urinal flat back, size ofangle back of size 430 x 370 x 340 mm (minimum ), with grating and union for discharge pipe and waste pipe complete all as specified and directed. Make - Jaquar Cat-URS-WHT-13261/Cera Cat-S4020112/Kajaria Cat-RASSO-KS507

S & F In repair Continental single piece WC with PP Soft close seat cover ,hinges, Dual flush cistern fitting , P Trape 180mm with fixing accessories size 380x700x665 mm complete all as specified and directed. Make-Jaquar Cat-LYS-WHT-38851P180UFSM,/Cera Cat-A1014112/Kajaria Cat-VERA-KB3026

S & F In repair Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but fixing of supply and waste pipe complete all as specified and directed. Make - Jaquar Cat-CNS-WHT-818/Cera Cat-A20200109/Kajaria Cat-BAINES-KS293W

S & F In repair Towel Ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.Make - Jaquar Cat-ACN1121BN/Cera Cat-F5014105CH/ Kajaria Cat-KA670005

S & F In repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges size 450 mm long complete all as specified and directed. Make - Jaquar Cat-ACN1111SM/Cera Cat-F5014103CH/Kajaria Cat-KA990001

S & F In repair Soap dish, any type, fixed to plugs with chromium plated brass screws with fixing accessories complete all as specified and directed.Make - Jaquar Cat-ACN1131N/Cera Cat-13F5014116CH/ Kajaria Cat-KA670004

S & F In repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges size 450 mm long complete all as specified and directed. Make - Jaquar Cat-AQN7781/Cera Cat-F5001101/Kajaria Cat-KA660010

S & F In repair Toilet paper holder with flat recessed type stainless steel single toilet roll holder with stainless steel flap with fixing accessories complete all as specified and directed. Make - Jaquar Cat-ACN1153S/ Cera Cat-F5013110CH/Kajaria Cat-KA990009

S & F In repair Continental Corner glass shelf (with bracket) with fixing accessories complete all as specified and directed. Make - Jaquar Cat-ACN1173/Cera Cat-F500103/Kajaria Cat-KA980014

S & F In repair Continental soap dispenser with glass bottle with fixing accessories complete all as specified and directed. Make - Jaquar Cat-AKP35735P/Cera Cat-F5012111CH/Kajaria Cat-KA990015

S & F In repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long long with fixing accessories complete all as specified and directed.Make - Jaquar Cat-AQN7771/Cera Cat-F5001114/ Hindware Cat-F880010

S & F In repair Continental shivel mirror size 630X445mm rectangular shape with fixing accessories complete all as specified and directed .Make - Jaquar Cat-AKP35795/Cera Cat-B3510106/Parryware Cat-C896G46

S & F In repair Toilet paper holder with flat recessed type stainless steel single toilet roll holder with stainless steel flap with fixing accessories complete all as specified and directed

S & F In repair long body Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Cat-COP107PM/Cera Cat-G1017152/Kajaria Cat-KB1711004

S & F In repair Angle stop valve of any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed. Make - Jaquar Cat-COP057PM/Cera Cat-F8040301/Kajaria Cat-KB811003

S & F In repair Continental sensor faucet for wash basin (battery operated) with fixing accessories complete all as specified and directed. Make - Jaquar Cat-SNR51011N/Cera Cat-F6010102/Hinware Cat-F240001

S & F In repair Continental thin rim table top basin, shape - round, size - 455x455x110mm with fixing accessories complete all as specified and directed.Make - Jaquar Cat-JDSWHT25939/Cera Cat-A2020122/ Parryware Cat-CO41M

S & F In repair pillar taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed with fixing accessories complete all as specified and directed. Make - Jaquar Cat-OPP15001M/Cera Cat-G1017101/Hindware Cat-F520002

S & F In repair Continental single lever exposed shower mixer with provision for connection to exposed shower pipe (SHA-1211N) with connecting legs and wall flanges with fixing accessories complete all as specified and directed. Make - Jaquar Cat-FON40147/Cera Cat-F2008404/Hindware Cat-F740018

S & F In repair 0 Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed connector for hand shower arrangement with connecting legs, wall flanges & wall bracket for hand shower with fixing accessories complete all as specified and directed. Make - Jaquar Cat-QQP7273PM/Cera Cat-F1003402/Kajaria Cat-KB111018

S & F In repair stainless steel for disabled - friendy bath room Grab bar 692 mm long satin with fixing accessories complete all as specified and directed

S&F Sheet glass 4.80 mm thick (of any tint) or fixed and complete all as specified and directed

UTTRAKHAND BUILDERS

JAI SRI RAM ASSOCIATE

M/S VIRAT CONSTRUCTION

SANJEEV ENTERPRISES

REHAN CONSTRUCTIONS

M/S Alam Construction Co

Harsha Consultant and Builders

Jain construction co