Electrical Installation work for make shift arrangement for setting up Jalpaiguri Medical College, Jalpaiguri. Installation of Internal Electrical Work.

Amount

Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable (KEI /Havells/RR Kabel/ Gloster or Approved by EIC)

2 core 6 sq. mm.

4 core 16 sq. mm.

4 core 70 sq. mm.

4 core 120 sq. mm.

4 core 240 sq. mm.

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 2X10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [PWD/GS Page: F-1 Item: 2/b]

Laying of cable upto 3/4 core 25 sqmm [PWD/GS Page: F-1 Item: 2/b]

Laying of cable 3/3.5/4 core 70 sqmm to 95 sqmm [PWD/GS Page: F-1 Item: 2/d]

Laying of cable 3/3.5/4 core 120 sqmm to 150 sqmm [PWD/GS Page: F-1 Item: 2/e]

Laying of cable 3/3.5/4 core 240 sqmm [PWD/GS Page: F-1 Item: 2/e]

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable. [PWD/GS Page No.: F-4 Item No.: 7/c]

2 core 6 sq. mm.

4 core 16 sq. mm.

4 core 70 sq. mm.

4 core 120 sq. mm.

4 core 240 sq. mm.

Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials. [PWD/GS Page No.: F-5 Item No.: 8/b]

2 core 6 sq. mm.

4 core 16 sq. mm.

4 core 70 sq. mm.

4 core 120 sq. mm.

4 core 240 sq. mm.

Supply & laying of three core 4 sqmm. un-armoured copper cable through rigid conduit including supply & fixing of 19mm rigid conduit.

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. [PWD/GS Page No.: D-14 Item No.: 34/a/i]

100x50x1.25mm (18SWG) Cable Tray

150x50x1.25mm (18SWG) Cable Tray

S&F medium gauge 65mm dia GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required as per GS. [PWD/GS Page: F-6 Item: 11]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire, with an average depth of 3.65 Mts. below the ground level (For soft Soil: ISI-Medium GI pipe) [PWD/GS Page No.: G-1 Item No.:2/a]

Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil) [PWD/GS Page: G-1 Item:1]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [PWD/GS Page: G-2 Item: 3/a]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode [PWD/GS Page: G-2 Item: 3/b]

S&F earth busbar of galvanized (Hot Dip) MS flat on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [PWD/GS Page: G-2 Item: 4/a]

S&F galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall

Connecting the equipments to earth busbar including S & F 4SWG GI (Hot Dip) wire of size. [PWD/GS Page:G-2 Item: 5/a]

S & F 4/6 SWG GI (Hot Dip) wire of size.

Connecting the equipments body to earth busbar including S&F galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat [PWD/GS Page:G-3 Item: 5/c]

S&F double door 8-Way Vertical TPN MCB Distribution board for 160A MCCB incomer with IP-42/43 protection, on angle iron frame on wall incl. Inter connection & provision for earthing attachment (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-11 Item: 15]

S&F IP-42/43 cable end box for 8-way VTPN (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-12 Item: 16]

S&F double door 6-Way Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall (Legrand: (607716 /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-10 Item: 14 ]

S&F IP-42/43 wire way box for 6 way HTPN (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-12 Item: 16]

S&F double-door (2+16) Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall. (Legrand: 607713 /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-09 Item:13]

S&F Wire way box suitable for 2+16-way SPN MCB DB(Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC)

S&F 40A 240/415 V (L&T: AUC00204000) changeover switch of on din rail of existing DB and necessary connection.

S&F Legrand: make 40A, 240V, 300mA sensetive double pole RCBO (L&T: AUF3C204030).

S&F 415 V L&T 160A 4- Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection[PWD/GS Page: D-8 Item:10]

Supply & fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-6 Item: 7]

63A FP MCB

63A TP MCB

40A DP MCB

6-32A SP MCB

Distn. wiring in 3X22/0.3 (1.5 sqmm) single core stranded 'LS0H or ZHFR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board complete with 2 no. “Ph & N” copper bar and 'L' sahped insulator chair with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. [equivalet to PWD/GS Page: E-9 Item: 2/a]

On board 5A

Average run: 08 Mtr.

Average run: 10 Mtr.

Average run: 12 Mtr.

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge 19mm polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works [PWD/GS Page: E-02 Item: 3/a]

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge 25mm polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works [PWD/GS Page: E-02 Item: 4/a]

Distribution wiring in 1.1 KV single core stranded 'LS0H or ZHFR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required [equivalet to PWD/GS Page: E-14 Item: E/1/a]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'LS0H or ZHFR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 2 X 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required [equivalet to PWD/GS Page: E-9 Item: E/1/a & E-16 item: 7]

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [PWD/GS Page: F-5 Item: 9]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm)

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm)

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm)

S&F 250 V AC/DC superior type Call Bell (Anchor-8320) on HW board incl. S&F HW board [PWD/GS Page: D-13 Item: 20 ]

S&F 240 V two 5 Pin 6A flush type plug socket with two 6A Piano key type (Anchor make) switch on sheet metal box with bakelite top cover and earthing attachment incl. S&F sheet metal box appropriate of size [16 SWG] with 3mm thick bakelite top cover. [PWD/GS Page: E-4 & 5 Item: 11, 12 & 14, 15]

S&F 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite top cover of 3mm thick and making necessary connections as required (Computer Board) [PWD/GS Page: E-7 Item: 26 ]

S&F 240 V one 5 Pin 20A flush type modular plug socket with 2 Module GI Modular type switch board with 2 Module top cover plate flushed in wall.

Supply & Fixing 240 V, two nos. 16 A, 3 pin plug socket (Brand approved by EIC) with two nos. 16A piano key type switch, without plug top on sheetsteel metal switch board and bakelite top cover of 3mm thick and making necessary connections as required .

Supply & fixing Sintex loop box of size 250 x 200 x 105 (Syntex: GSJB-2520) with half round clamp on pole and supply & fixing a best quality 63A, 4-pole barrier terminal inside it including all accessories.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-19 Item: 17 ]

S&F Electronic Socket type fan regulator on existing switch board with backelight top cover after making housing for regulator knob by cutting backelight top cover including making necessary connections. [Make: Anchor] [PWD/GS Page: E-6 Item: 18/a ]

Supply & Fixing 18", 450mm 4-blades, Metal Body AC wall bracket fan (Orient: Wall-II Tornado or equivalent of Havells ) and (back side of fan should me metal) on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) on 150mmX300mm best quality vernished wood or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [PWD/GS Page: C-4 Item: 29 ]

Supply & Fixing 18" 3-blades, Metal Body AC pedestal fan (Orient: Pedestal-II Tornado or equivalent of Havells or Crompton).

S&F EPC make 9" Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter. [PWD/GS Page: C-4, Item: 28, 30 ]

S&F EPC make 12" Heavy Duty Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter. [PWD/GS Page: C-4, Item: 28, 30 ]

Supply & Fixing 56" (1400mm) AC ceiling fan make: (Orient PSPO NEWBREEZE or SUMMERCOOL / equivalent of Crompton or Havells or approved by EIC) complete with down rod, canopy fork, blades with all other accessories etc. but without regulator. [PWD/GS Page: C-3 Item: 21/a] Supply & fixing additional safety arrangement of ceiling fan by stranded GI strain wire of suitable gauge with one end fixed at RC clamp with special type of socket, nut-bolts, thimbles which throughly crimped with the strain wire and the wire passing through down rod (for upto 8 ft) and also other end connected with armature spindle by its existing jam nut hole with special arrangement (sample approved by EIC). The length of the strain wire up to 9ft also considering any type of work required i.e. enlarging the existing hole by file etc. to complete the job including installation as per direction of EIC (Static & Dynamic Load Test (in rotation of 1:20) certificate must be provided with final bill jointly with concerned Junior Engineer & authorised Electrical Supervisor of Agency).

Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop (like as PWDES1 0001) [PWD/GS Page: C-3 Item: 24/a ]

S&F of FulllGlow-High efficiency 2ftX2ft LED Panel light fitting complete with all accessories suspended from false ceiling / decorated false ceiling with all accessories [Philips: RC380B LED36S-6500 L60W60 PSU OD S1 or Equivalent of Havells/ Crompton LCTLRNE-36-FO-CDL approved by EIC)

S&F single 4ft LED tube light fitting incl. 4ft LED tube (LTT8-20), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Crompton: IGP131LT8-16 or Equivalent of Philips or Havells] [PWD/GS Page: C-2 Item: 17]

S&F single 4ft LED tube light fitting incl. 4ft LED tube (LTT8-20) complete with all accessories Directly on wall with HW block/MS flat (25X6mm) clamp (as per direction of EIC) and suitable size MS fastener, Ceiling plate, nipples etc. as required. [Crompton: IGP131LT8-16 or Equivalent of Philips or Havells] [PWD/GS Page: C-2 Item: 14/d]

S&F double 4ft LED tube light fitting incl. 2 nos. 4ft LED tube lamp (LTT8-20), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Crompton: IGP132LT8-16 or Equivalent of Philips or Havells] [PWD/GS Page: C-2 Item: 17]

S&F double 4ft LED tube light fitting incl. 2 nos. 4ft LED tube (LTT8-20) complete with all accessories Directly on wall with HW block/MS flat (25X6mm) clamp (as per direction of EIC) and suitable size MS fastener, Ceiling plate, nipples etc. as required. [Crompton: IGP131LT8-16 or Equivalent of Philips or Havells] [PWD/GS Page: C-2 Item: 14/d]

Extra for suspension for LED TUBE light fitting exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [PWD/GS Page: C-2 Item: 16]

Supply & Fixing of 10W LED Lamp. Havells or Equivalent of Philips or Crompton )

Supply & fixing Sintex loop box of size 250 x 200 x 105 (Syntex: GSJB-2520) with half round clamp on pole and supply & fixing a best quality 32A, 2-pole barrier terminal and 6A SP MCB inside it including all accessories.

Supply & fixing of single arm header assembly made with 100mm dia GI pipe Jacket of 30cm long with 1.5 mtr. long 40mm dia GI pipe bracket duly welded with top cap at an angle of 110 degree with the vertical incl. 12 mm dia full threaded through nuts-bolts and 3 nos. supporting nut-bolts etc. including necessary painting as per direction of EIC.

Supply & fixing of Crompton: LSTP-60-CDL or equivalent of Philips or Havells outdoor type light fitting complete with all accessories to be fixed on 9 mtr. incl. S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making necessary connections as required.

Supply & fixing Sintex loop box of size 250 x 200 x 105 (Syntex: GSJB-2520) with half round clamp on pole and supply & fixing a best quality 32A, 2-pole barrier terminal and 6A SP MCB inside it including all accessories.

Panel No. 1: Supply delivery installation testing & commissioning Indoor Cubical type L.T. Distribution panel board of appropriate size base mounted cmpartmentalized with maple arrangement having rigid & self supporting structure with cable allay fabricated from 2 mm thick CRCA sheet steel and 5X40X40mmX4.4mm M.S. Channel for base support. And making masonary trench of 600mm depth and suitable length & wide in matching with Panel with 10" brick work, plastering & neet cementing as per direction of EIC. The panel board consisting of the following item-

415V, 500A electrolyte grade tinned copper BBC with vertical / Horizontal section of 50X6 mm size for neutral & Phases. Bus-bar shall be fixed with FRP insulator chair & the entire bars are insulated with PVC heat Sinkable sleeve of suitable size & color as per direction of E.I.C [equal bar for each i.e. 4-bar] And Interconnections for : 400A MCCB with 50X6 mm copper bar and all incoming and outgoing MCCB should be connected with suitable size copper strip.

Incomming: L&T 415V 400A FP MCCB with spreader link & Extended Rotary handle(Thermal magnetic type).---01 no. Outgoing: L&T 415V 200A FP MCCB with spreader link & Extended Rotary handle(Thermal magnetic type) - -----------06 nos. L&T 415V 160A FP MCCB with spreader link & Extended Rotary handle( Thermal magnetic type)- -----------06 nos. Other equipments: 3-phase LED Volt Meter class-1 (L&T: WL132010OOOO) ---01 no. 3-phase LED Ammeter 5A, class-1 ( L&T: WL131010OOOO) ------ 01 no. 400/5A CT (Kappa) --- 03 nos. LED R-Y-B indicator with --- 03 nos. 6A SP MCB -- 03 nos. Supply & Fixing 08"X06" Danger Board ---- 02 nos.

Panel No. 2: Supply delivery installation testing & commissioning Indoor Cubical type L.T. Distribution panel board of appropriate size base mounted cmpartmentalized with maple arrangement having rigid & self supporting structure with cable allay fabricated from 2 mm thick CRCA sheet steel and 5X40X40mmX4.4mm M.S. Channel for base support. And making masonary trench of 600mm depth and suitable length & wide in matching with Panel with 10" brick work, plastering & neet cementing as per direction of EIC. The panel board consisting of the following item-

415V, 500A electrolyte grade tinned copper BBC with vertical section of 50X5mm size for neutral & Phases. Bus-bar shall be fixed with FRP insulator chair & the entire bars are insulated with PVC heat Sinkable sleeve of suitable size & color as per direction of E.I.C [equal bar for each i.e. 4-bar] And Interconnections for : 400A MCCB with 50X6mm copper bar and all incoming & outgoing MCCB should be connected with suitable size copper strip.

Incomming: L&T 415V 400A FP MCCB with spreader link & Extended Rotary handle(Thermal magnetic type)--------01 no. Outgoing: L&T 415V 250A FP MCCB with spreader link & Extended Rotary handle(Thermal magnetic type)---------- 04 nos. Other equipments: 3-phase LED Volt Meter class-1 (L&T: WL132010OOOO) ---01 no. 3-phase LED Ammeter 5A, class-1 ( L&T: WL131010OOOO) --- 01 no. 400/5A CT (Kappa) ----03 nos. LED R-Y-B indicator with ----- 03 nos. 6A SP MCB -------03 nos. Supply & Fixing 08"X06" Danger Board ----02 nos.

M/S. A.D.ELECTRICAL ENTERPRISE

ELECTROCRAFT