SPECIAL REPAIRS OF EXISTING DRAINAGE SYSTEM FROM BLOCK I TO MT GATE AND BLOCK II II TO ARO MAIN GATE OF 117 INF BN TA THE GUARDS AT GARUDA LINES AND SPECIAL REPAIRS AGAINST BER VOLTAGE STABILIZER GEYSER AND CABIN FAN AND CEILING FANS AND CERTAIN MINO

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft loose soil complete all as specified and directed.

Deamolition of PCC of any description and in any position not otherwise specially provided for all as specified and directed.

Demolition of PCC block walling built in cement mortar 1:6 complete all as speicified and direceted.

Cement concrete in surface channels and drains type C2 1:3:6 using 40mm graded stone aggregate all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in mortar 1:4 type C1 1:3:6 using 20mm graded aggregate complete all as specified and directed

Extra for forming fair finished drain or channel of 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/ dense soil complete all as specified and directed

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in coping complete all as specified and directed.

Providing Precast cement concrete for RCC cover blocks type B1, 1:2:4 using 20mm graded stone aggregate set in cement mortar 1:4 complete all as specified and directed.

Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Supply and fix Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with out put voltage stabilized at 230 V with accuracy of + 2.5% and of capacity 5 KVA with digital display all as specified and directed.

Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed.

Wall mounted fan complete with blade and accessories 230V, 400 mm Sweep complete all as specified and directed.

Ceiling fans complete with blades, down rods, electronic regulator and accessories including cable connection, 230 V, 1200mm sweep Min air delivery 210 CFM with serive valve 6.00 BEE five star rated all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volt grade, 16 sqmm 4 core in trenches/ through pipes/ ducts or on poles/ walls jointing to OH conductor, LT panels, main switch with cable size including aluminium lugs and testing complete all as specified.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volt grade, 6 sqmm 4 core in trenches/ through pipes/ ducts or on poles/ walls jointing to OH conductor, LT panels, main switch with cable size including aluminium lugs and testing complete all as specified.

Galvanised Tubes 'Medium grade' with all fittings laid in trenches/ fixing on pole for cable protection of size 25 mm bore complete all as specified.

Galvanised Tubes 'Medium grade' with all fittings laid in trenches/ fixing on pole for cable protection of size 40 mm bore complete all as specified.

PCC hard standing/ road surfaces including making good the surface with PCC 1:2:4, Type B1 using 20mm stne aggregate to match the existing surface complete all as specified.

Junction Box, Sheet Moulding Compound (SMC) type, with hinged type door , locking arrangement off white colour suitable size comprising Bakelite terminal connector , MCB SP 5 Amps - 1 N0.complete fixed on pole / wall etc., with suitable size clamps, bolts, nuts. all as specified and diredcted.

LED street light fitting 45 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete made required shape all as specified and directed

Wiring for circuit / sub main wiring using FR PVC insulated copper conductor cable of size 2 x1.5 mm2 along with 1 x 1.5 mm2 single core cable for earth continuity to be drawn in non metallic PVC conduit in surface / recessed all as specified and directed Note:Two runs of PVC insulated cable with one run of earth wire and one run of conduit including accessories shall be measured as one length

Steel tubular swaged poles type 410 SP-22 (9.0 meter long) complete with CI base plate and finial including foundation and coping including testing complete all as specified and directed

Supply, Errect, connect, test and commissioning of Feeder pillar panel out door type conforming to protection class IP 54 of IS 2147 of 1962 KISOK type made out of 3 mm thick MS sheet weather proof with front opening hinged double doors and locking arrangement duly powder coated painted and mounting on PCC platform (1:2:4) type B1 including re-connecting the existing cable all as directed comprising of followings:- (i) MCB 4 pole 16 A breaking cap 10 KA - 01, (ii) Timer switch with 4 pole contactor-01 including wiring for provn of lugs and cable gland for incoming & out going cables complete all as specified and directed.

earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level, top edge of the plate not less then 1.5M below nominal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts and cheek nut and washer of galvanised iron incl GI protection pipe and watering pipe all as shown in electrical plate No 5 of SSR Pt 1 including connection with O/H conductor on poles / main switch board / Panel / FPB all as specified or indicated incl testing on completion incl taking and/removing old u/s earthing from extg location all as specified and directed

spreading clean dry riddled sand in trenches for cushioning all as specified for cable protection in trenches / ducts complete all as directed. Note:- The punned down thickness shall only be measured

Un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250 mm x 150 mm x 40 mm as protection to cable complete all as specified and directed.

Cutting PCC/ Road 200 mm thick for laying of cable all as specified and directed

AM BUILDERS

RELIANCE SALES AGENCY