COMPREHENSIVE MAINT OF CERTAIN BLDGS AND PERIODICAL SERVICES OF OTM AND MD ACCN OF NHO AND HQ CWE (HILLS) DEHRADUN UNDER AGE B/R-III OF GE CLEMENT TOWN

Amount

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed by Engr-in-Charge.

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thick ness including cover fillets complete all as specified and directed by Engr-in-Charge..

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position complete all as specified and directed by Engr-in-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutters exc 1 Sqm and n.exc 2 Sqm of any description and refixing in same opening/position include cutting for size and fitting including making good of distrub area complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass of size >exc 1.50 Sqm (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springclips and providing and fixing new one complete all as specified and directed by Engr-in-Charge.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-Charge.

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-Charge.

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes of capacity exc 250 & n exc 500 ltrs complete all as specified and directed

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes of capacity exc 500 & n exc 1000 ltrs complete all as specified and directed

M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screwscomplete all as specified and directed by Engr-in-Charge.

S&F Rolled Mild steel work of Fe-290 (Gde E-165) as in framed work, trussed, purlins, crane gantries, rails & fastenings and heavy bracket framing (Beam, tee, angle, channel, Hollow section or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC (1:2:4) type B-1 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L RCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, cooking platform ,canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed by Engr-in-Charge.

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

M&L Vitrified coloured tiles 8-10mm thick any Shade/Double charged (square/rectangular) area of each tiles exc 0.18 Sqm but not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 laying floor finishes, complete all as specified and directed by Engr-in-Charge.

M&L Vitrified coloured tiles 8-10mm thick Dark Shade/Double charged (square/rectangular) area of each tiles exc 0.18 Sqm but not exc 0.36 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 to recieve tiles complete all as specified and directed by Engr-in-Charge.

M&L for Non skid Endura coloured tiles 8-10 mm thick (square/rectangular) , area of each tile exc 0.06 Sqm but not exc 0.11 Sqm over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Non skid Endura coloured tiles 8-10mm thick (square/rectangular) , area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in vertical surface such as dado/ skirting etc over and including 10mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 15mm thick screed bed in CM (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic coloured joint free tiles 450x300x7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like over and including cement screed bed 15mm thick in CM (1:6) including pointing in white cement (1:2) using marble dust to match with marble shade complete all as specified and directed by Engr-in-Charge.

M&L for rubber moulded coloured cement concrete chequered tiles polished of size 30cm x 30cm x 25mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for coloured Machine pressed precast polished concrete interlocking paver block as in road berm, path and hardstanding any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with pigments over and including 25mm thick sand cushioning complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick factory made flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed by Engr-in-Charge.

S&F in repair powder coated aluminium glazed side hung double door shutters with anodised aluminium frame of section 100x44x1.5mm and shutter having style, top rail, lock rail and bottom rail of 84x44x1.5mm including 5.5mm thick tinted blind sheet glass ordinary quality with all necessary suitable push & pull plate/handle, screw, jointing cleats, rubber packing, aluminium snap beading and 1 No 200mm long Al tower bolt in each shutter, 100 mm long 3 No Al butt hinges B-21 type in each shutter, and one No mortice brass lock 100mm size 6 leaver (vertical type) complete all as specified and directed by Engr-in-Charge.

S&F Factory made 100% Solid WPC Brown door Frame (75mm x 50mm Single Rebate) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cum & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawing as directed by the Engineer-in-Charge. The door frame should be Waterproof, Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F Factory made 100% Solid WPC Brown door Frame (100mm x 63mm Single Rebate) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cum & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawing as directed by the Engineer-in-Charge. The door frame should be Waterproof, Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F Factory made 100% Solid WPC Brown door Frame (125mm x 63mm Double Rebate) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cum & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawing as directed by the Engineer-in-Charge. The door frame should be Waterproof, Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F 24mm thick Moulded WPC Brown Factory made 100% Solid door (Conforming as Per IS:4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side plain with density not less than 600 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be Waterproof, Termite Proof, Fire Retardent and having screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick Moulded WPC Brown Factory made 100% Solid door (Conforming as Per IS:4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side plain with density not less than 600 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be Waterproof, Termite Proof, Fire Retardent and having screw holding capacity complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick Factory made Wiremesh SOLID WPC(Wood Plastic composit) moildede gauged door shutter with wire mesh in any number of division with brown wood grain texture, including S.S wire mesh shall be fixed with 15 x 15 square tube in side rails with screwing 8x28 heat metal zinc coated screws can be removed or fix again after changing of wire mesh when needed. The density of the door shall be as per manufacture instruction complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium powder coated three track sliding windows (with three sliding shutters, (One with and incl stainless steel wire mess and two with and incl 4mm thick sheet glass panes) aluminium sections not less than 1.1kg per meter for bottom track and top track and side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides, 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete all as specified and directed. Windows shall be provided with guard bars using 25mm flat iron and 10mm square bars of design including painting of guards bars, complete all as specified and directed by Engr-in-Charge.

S&F in repair 18mm thick WPC board one side prelaminated and other side plain white colour as in cup boad shutters and frames, kitchen cabinet front shutter, partion, shelf & drawer, fixed with screws, solvent cement/ adhesive complete all as specified and directed by the Engineer-in-Charge.

S&F 100mm long stainless steel butt hinges, medium weight cold rolled complete all as specified and directed by Engr-in-Charge.

S&F 150mm long, Stainless Steel barrel tower bolts complete all as specified and directed by Engr-in-Charge.

S&F 100mm size Stainless Steel handles, all as directed complete all as specified and directed by Engr-in-Charge.

S&F 150mm size Stainless Steel handles, all as directed complete all as specified and directed by Engr-in-Charge.

S&F of 250mm long (Length of bolt) Stainless Steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, and fixing bolts and sliding bolt complete all as specified and directed by Engr-in-Charge.

S&F 150mm Stainless Steel Hasp and Staple, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Hydrulic Self Closing hinges 35mm of crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F aluminium section for modular kitchen partition incl fixing with cleats complete all as specified and directed

S&F 18 m thick with min density 600kg/cum LEAD FREE PVC celuka ply of both side plain white fixed with SS screws solvent cement/ adhesive to make kitchen cabinet, shelves as per manufacturers instruction complete all as specified and directed.

S&F in repair 16 to 18 mm thick pre laminated TESA ACTION shutter ultra voilet coated panels of intrior grade type II with melamine finish of approved shade for kitchen cabinet fixing with necessary fittings (like keku fitting, spring clip, hanger plate, modular hinges) all as specified and directed including taking down of old cupboard/ cabinet shuttr complete all as specified and directed

S&F set of 6 modular kitchen stainless steel basket , pull out drawers, shelves cabinet, rack basket tray for multipurpose utensil containers shelf organiser complete incl all fittings and side sliding rails all as specified and directed.

S&F in repair door closer aluminium (extruded section) body hydraulically regulated, designation No. 3, universal type, complete all as specified and directed by Engr-in-Charge.

S&F in repair 300mm long MS Helical ordinary rat tail rod pattern door spring including roller and roller plate etc complete of approved quality complete all as specified and directed by Engr-in-Charge.

S&F in repair of 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate complete all as specified and directed by Engr-in-Charge.

S&F in repair 4mm thick plain glass of aluminium window by taking down window shutter by any means and replacing rubber packing, jointing clip etc. complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n.exc. 0.5 sqm each pane complete all as specified and directed by Engr-in-Charge.

S&F 25mm dia drapery rod fancy type powder coated wooden finish fixed to wall with wooden finale and brackets incl ends doms complete all as specified and directed by Engr-in-Charge.

S&F Dust/Snake guard aluminium strip in doors of size 40x2mm with rubber at strip bottom complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering cement mortar (1:4) mixed with liquid water proofing compound on brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. (WPC shall be paid seperately)

M&L for 10mm thick plaster on roof, chajja and roof parapet of CM (1:3) on RCC finished even and smooth without using extra cement etc ncl taking down cement plaster complete all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for three coats of white wash to newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for two coats of oil bound distemper over a coat of 1mm thick wall putty to newly plastered surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L two coats of cement based paint over a coat of white wash to newly plastered surfaces of wall including preparation surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surface by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls surface including salt, glue and blue etc. as required incl cleaning of glass panes, floor and plinth protection complete all as specified and directed by Engr-in-Charge.

All as per item No. 76 above but two coats of white wash on wall surfaces complete all as specified and directed by Engr-in-Charge.

All as per item No. 76 above but one coat of white wash on ceiling surface complete all as specified and direced by Engr-in-Charge.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on walls including cornices, pilasters etc complete all as specified and directed by Engr-in-Charge.

All as per item No. 79 above but on ceiling surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller over a layer of wall care putty to make the surface smooth all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge.

M&L for preperation of old decorated/painted surfaces of walls by washing, rubbing down and stoping painted surfaces and applying one coat of plastic emulsion paint complete all as specified and directed by Engr-in-Charge.

M&L preperation of old painted concrete/tile floor surfaces of any description includig scraping, brushing, brooming down and repair surface with Primer and applying two coat of Indigo emulsion floor paint any tint / shade over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L preperation of old painted plastered surfaces of any description and applying one coat of exterior emulsion paint (Apex) of asian paint or other equivelent as approved complete upto four storey height all as specified and directed b Engr-in-charge. Note : The work is required to be carried out upto 4th storey building. The cost of scaffolding shall be deemed to be included in the item. The contractor shall also make necessary safety arrangement for labour

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.

M&L for preparation surface of old wall by washing,rubbing down and stopping of surfaces and applying one coat of cement base paint on walls complete all as specified and directed by Engr-in-Charge.

M&L for preparation surface of old wall by washing,rubbing down and stopping of surfaces incl complete removal of existing treatment and applying two coat of cement base paint on walls complete all as specified and directed by Engr-in-Charge.

M&L for preparation surface of old wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

All as per item No. 88 above but applying two coat of synthetic enamel paint on wooden surfaces complete all as specified and directed by Engr-in-Charge.

M&L preperation of old painted steel and iron surfaces of any description not otherwise described over 10cm width of girth and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed by Engr-in-Charge.

M&L for preperation of old painted plastered or concrete surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L two coats of weather proof emulsion paint Apex in newly plastered surface over a coat of primer incl preparing the surface with 2mm thick wall putty complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of french polish on wooden surface complete all as specified and directed

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed by Engr-in-Charge.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling for 15mm bore GI tubing complete all as specified and directed by Engr-in-Charge.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling for 20mm bore GI tubing complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm dia PVC (SWR) floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 110mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 75mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 75mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 110mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 75mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC vent cowls 75mm complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC waste pipe 32/40 mm dia complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed by Engr-in-Charge.

S&F in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore Stop valve fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia brass chromium plated pillar tap long body with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified and directed by Engr-in-Charge.

S&F in repair of Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia brass CP wall mixer with provision for over head shower with 115mm long bend pipe and wall flange for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia brass CP Sink mixer with swinging spout (wall mounted model) with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections fixed in position complete in all respect as specified and directed

S&F in repair CP angular stop cock 15mm dia single way and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair PTMT bath mirror cabinet of overall size 500mm x 400mm, fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair CP toilet paper holder fixed to wall with CP brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Sheet glass shelf assembly/Glass Corner assembly set of three consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed by Engr-in-Charge.

S&F in repair 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china white wash down couple closet composite type including PVC soft seat cover white complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC seat cover for wash down couple closet incl fixing bolts complete all as specified and directed

S&F in repairs Kitchen Plate rack with and including shelves and hanging arrangement for utensil for kitchen, made of stainless steelsheet 0.63mm thick size 24"x24"x10" complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC water storage tank double layer cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC water storage tank double layer white colour cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 25mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed by Engr-in-Charge.

M&L for concrete in Sunken floor and vertical faces of walls to ease up about corners with cement concrete 1:2:4 type B0 (using 12.50mm stone aggregate) mixed with SBR Latex liquid polymer (mixed as per manufacture instructions & will be paid under relivnt item of Sch A) including using form work (straight or curved) as required complete as per directions by Engr-in-Charge.

M&L for providing cement concrete 1:2:4 type B-1 for fixing edge of interlocking tiles and rounded or chamfered edges, coping complete all as Specified and directed by Engr-in-Charge.

S&F False Ceiling with Semi perforated 10mm thick Square edged GRG False Ceiling tiles at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Nomocombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120grams per Sqm incliuding both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50mm lon, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster os size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed by Engr-in-Charge.

S&F in repair 6mm thick PVC heavy grade hollow profile designer sheet strips & channel feathered at edges of approved quality and design PVC Wall/Ceiling lining fixing with frame including all beading, matching PVC angles at all window corners with all necessary frame as required complete all as specified and directed by Engr-in-Charge.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

G S CONSTRUCTIONS (BID ID -3347302)

A.S. CONSTRUCTION COMPANY (BID ID -3338793)

sweety pest control (BID ID -3347164)

M/s caspur construction company (BID ID -3347072)