ELECTRICAL INFRASTRUCTURE WORK AT IIE SIIDCUL HARIDWAR, SECTOR 10, 11, 12

Supplying of 60 Watt LED Street light fixture powder coated pressure die cast aluminum body with driver as per the requirement Make - Havells, Cromption, Philips, Bajaj

Installation of LED Street light fixture on existing Street Light Pole.

Supply of 1.5 sqmm single core wire by required size for replacement of damaged 1.5 sqmm cable

Supply and laying of 35 Sqmm 3.5 Core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground levelover a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in allrespect The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

SITC of Earthing termination made of copper-bonded rod (Minimum copper bonding shall be 0.25mm) as per IS 3043, IEEE-80, NBC 2016 along with 25 kg Earth enhancement material some with resistivity of 0.12 ohm-mtr, and complying IEC 62561-7 and Pit Cover complying IEC 62561-5 and other accessories as required and as per specification and other applicable codes.

Muffing of pole size 0.45x0.60 cm radious with cc 1:3:6 (01 Cement : 03 Coarse : 06 grade stone 10 mm nominal size) block size 45cm height from ground level including cost of cement stone and sand etc.

Pole painting including surface cleaning, 01 primer coat and 01 Aluminum Coat with numbering on poles as per the site requirement including material and labour charges.

Repair of 160 KVA transformer installed for main supply of water supply and street light