Repair to 50000 GPH x 130 meter head HC pump set installed at pumping station Salmay stage-2nd (New) alongwith allied works.

Repair of 50000 GPH X 130 meter head pump installed at pumping station Salmay Stage-2nd (new). The job involves disconnecting incoming main power, decoupling of pump from motor, unfastening pump from base frame, suction and delivery, fitting blind flange on delivery side and subsequently shifting the pump to workshop. Dismantling the pumping unit and extraction of internal parts followed by repair by way of fitting of new SS shaft as per sample turned and finished to the original bearing size. Providing, fabrication and fitting of impellers-2nos., diffusers-1 no., diffusers bushes-02nos, neck ring-3nos. spacer bush-2nos., protection sleeve 2 nos., gland bush-2no., chuck nuts-2nos., alongwith repairing of impellers 01 no., diffuser 02 nos. Providing and fitting of new bearings 410-1no and 6410-1no., and 6319-2nos. of 200 HP motor in lieu of damaged bearings. Job also includes fabrication of coupling pulley set and thereafter assembling the pumping unit and shifting to site of installation, fitment on base frame and then coupling of pump with the motor after making proper leveling and alignment, making electrical connections, testing the pump motor set on no and on full load. Complete job includes cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.