Improvement of service road of Rajua left embankment from Pandiaibili to Badaput village .

Clearing grass and removal of rubbish up to a distance of 50 meters outside the periphery of the area, with all labour, T&P, taxes & cess etc complete as per direction of Engineer-in-charge.

Construction of embankment with approved material obtained from borrow pits with all leads and lifts, transporting to site with mechanical means with in a lead of 1km spreading, grading to required slope and compacting to meet requirement of table 300-2 and clause 305 of MOSRT&H specification for road and bridge work (4th revision) etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam of Grade III specification including spreading in uniform thickness, hand packing, rolling with three wheeled steel roller 8-10 tonnes in stage to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density as per clause 404 of MoRT&H specifications for Road & Bridge works(4th Revision) with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoRT&H Specifications for Road & Bridge works (4th Revision).

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including clearing of road surface and spraying primer @ 0.60 Kg/sqm using mechanical means as per clause 502 of MoSRT&H Specification for Road & Bridge works (4th. Revision).etc with all mechineries,labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing and applying tack coat with bitumen emulsion (RS-I) on prepared surface using emulsion pressure distributor @ 0.20 kg/ sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per clause 503 of MoSRT&H Specification for Road & Bridge works (4th. Revision).etc with all mechineries,labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing & laying Bituminous Macadam of Grading-II (19mm nominal size) with hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder of 60/70 penetration grade, transporting the hot mix to work site, laying with a hydrostatic paver finisher wit censor control to the required grade, level, alignment, rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoRT&H specification for road and bridge works (4th revision)

Providing & laying SDBC of Grading-II with batch mix hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder of 60/70 penetration grade, transporting the hot mix to work site, laying with a hydrostatic paver finisher wit censor control to the required grade, level, alignment, rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoRT&H specification for road and bridge works (4th revision)

Providing of moorum spreading to required thickness including watering, turf edging and compaction with PRR etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Please Enable Macros to View BoQ information