Zilla Parishad 15th FC PFMS(Tied)

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead upto 50 m as per Technical Specification Clause 302.3 MORD but excluding GST

Construction of improved subgrade by providing selected earth having minimum CBR of 10%, MDD not less than 1.85 g/cc with LL & PI not more than 40% and 20 respectively and spreading in uniform layers with tractor grader on prepared surface, and compacted at OMC with vibratory roller 80-100 kN as per Technical Specification Clause 303 MORD by using machinery including contractors profit,Over head charges, GST and Seignaorage charges etc complete

Construction of granular sub-base by providing well graded material (Table 400.1) with Grading III material (HBG M/C + Stone Dust) CBR Value not less than 20 and PI Vale less than 6 spreading in uniform layers with Tractor grader on prepared surface, mixing by mix in place method with totavator at OMC, and compacting with static Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD including contractors profit & Over head charges but excluding, Seignarage Charges & GST.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Power trowelling to finish as per the direction of Engineer in charge, rate inclusive of labour charges all complete for finished item of work.

Carying out Groove cutting 75 mm deep width petrol driven saw as per the direction of the Engineer-incharge including labour & machinary charges etc complete

Cost & Supply of selected earth including cost,conveyance, seigniorage and labour charges etc complete for finished item of work.

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in Loamy and Clayey Soils like B.C. Soils, red earth & Ordinary Gravel (SS 20-B) including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work for Foundation.

Filling with Stone dust in plinth from approved quarry /available sources in layers consolidating each deposited layer by watering and ramming including all operational, incidental, labor charges, hire charges of T & P etc., complete for finished item of work as per technical specification

Vibrated Plain Cement concrete (1:4:8) Nominal Mix using 40 mm metal using concrete mixer including all charges etc complete. For Bed

Vibrated Plain Cement concrete (1:2:4) Nominal Mix using 20mm & 12 mm metal using concrete mixer including all charges etc complete Bed.

Vibrated Plain Cement concrete (1:2:4) Nominal Mix using 20mm & 12 mm metal using concrete mixer including all charges etc complete Side walls.

RCC M-20 Nominal mix using 20 mm to 12 mm Graded size crushed hard granite metal including C/c of all materials, taxes, operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Slab over drain.

Providing High Yield Strength Deformed (TMT) steel bars (Fe 500 graded)of different diameters for RCC works, including cost of all materials and all labour charges for placing in position with cover blocks and tying and lap-splicing with binding wire of 18 SWG forming grills for reinforcement work as per designs and drawings,including all wastages such as overlaps, couplings, chairs, spacer bars and including all other taxes on all materials etc. complete

Providing inaguration stone with Galaxy Granite 18-20mm thick (Black) Premium quality of size 1.20 x 0.60 mtrs and carving letters upto 100mm thick including labour charges and all incidental charges etc. complete.