Renovation of existing toilet at Bus stand (Near Matri Chhaya building) for Temple Trust Shri Naina Devi ji, District Bilaspur (HP) Phase-II

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,complete in all respect within all lead & lifts, as per direction of Engineer-in-charge. (a) All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. Cement mortar 1:6 (1 cement : 6 coarse sand ).

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, complete in all respect as per direction of Engineer-in-charge

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement within all lead & lifts, complete in all respect as per direction of Engineer-in-charge (A)1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A) 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :- Foundations, footings, bases of columns, etc. for mass concrete within all lead & lifts, complete in all respect as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantileverswithin all lead & lifts, complete in all respect as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for :- Columns, Pillars, Piers, Abutments, Posts and Struts within all lead & lifts, complete in all respect as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for :- Suspended floors, roofs, landings, balconies and access platform within all lead & lifts, complete in all respect as per direction of Engineer-in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A) Mild steel and Medium Tensile steel bars. (Sail, TISCO, RINL, JINDAL, PANTHER,of (JSPL), SHYAM Steel ISI Make)

Brick work using common burnt clay F.P.S. ( Non modular) building bricks of class designation 7.5 in super structure above plinth level upto floor V in all shapes and sizes in within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) Cement mortar 1:6 ( 1 cement : 6 sand ) 2 nd Class Bricks

Half brick masonry in common burnt clay F.P.S. ( Non modular) building bricks of class designation 7.5 in super structure above plinth level up to floor V level within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) Cement mortar 1: 4 ( 1 cement : 4 sand) 2nd Class Bricks .

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

6 mm cement plaster of mix within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A)1:3 (1 cement : 3 fine sand)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) Size of tiles 1200x600 mm (Kajaria, NITCO, Johnson & Johnson &Simpolo)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) Size of tiles 1200x600 mm (Kajaria, NITCO, Johnson & Johnson &Simpolo)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadewithin all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) Two or more coats on new work over and under coat of suitable shade with ordinarypaint of approved brand and manufacture (Asian Paints)

Providing and fixing a piece construction white vitreous china squatting plate with an intrgral longitudinal flushing pipe, white P.V.C. automatic flushing cistern. with fittings standard size G.I./PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.E. Clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required.within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A) Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. (Hindware, Cera, Jaquar)

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A)Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (Hindware, Cera, Jaquar)

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) and finished smooth within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A)White Agaria Marble Stone

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.(Hindware, Cera, Jaquar)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing (A)Rectangular shape 1500x450 mm (Modi Float, Saint Gobind)

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhisive etc. complete. (A)110 mm dia (Supreme, AKG, Finolex ISI Make)

(B) 75 mm dia (Supreme, AKG, Finolex ISI Make)

Providing and fixing PVC doorbends with ovel; acess door,insertation rubber 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhisive etc. complete of required degree. (A) 100 mm dia (Supreme, AKG, Finolex ISI Make)

(B) 75 mm dia (Supreme, AKG, Finolex ISI Make)

Providing and fixing PVC Plain bends with ovel; acess door,insertation rubber 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhisive etc. complete of required degree.(A) 100 mm dia (Supreme, AKG, Finolex ISI Make)

(B) 75 mm dia (Supreme, AKG, Finolex ISI Make)

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : (A) 15 mm dia nominal bore (TATA, Jindal B Class Hissar Make ISI )

(B) 20 mm dia nominal bore (TATA, Jindal B Class Hissar Make ISI )

Providing and fixing PVC single equale branch Plain ISI marked including fixing with approved adhisinve etc. complete (A) 110 mm dia. (Supreme, AKG, Finolex ISI Make)

(B) 75 mm dia (Supreme, AKG, Finolex ISI Make)

Providing and fixing PVC collar ISI marked including fixing with approved adhisive etc. (A) 100 mm dia (Supreme, AKG, Finolex ISI Make)

(B) 75 mm dia. (Supreme, AKG, Finolex ISI Make)

Providing and fixing PVC P or S trap for water closet (Sqautting pan ISI marked including jointing the trap with the pan and PVC pipe with approved adhisive etc. complete.(A) 110 mm dia (Supreme, AKG, Finolex ISI Make)

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floors etc. complete (A)75 mm dia. (Supreme, AKG, Finolex ISI Make)

Providing and fixing PVC water storage tank of ISI 12701 marked GI inlet and outlet connection 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A)2000 litres each.=1x2000=2000 Litres( Sintix ISI Make Double Layer)

ASHWANI KUMAR

AYUSH ENGINEERING AND CONSTRUCTION