Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.9 LAccepted-AOC 96 SECTOR 16 A CHANDIGARH 160015 | CHANDIGARH | CHANDIGARH | 160015 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹97.9 L+₹4.9 L (5.28%)Rejected-Finance 164 SECTOR 21A CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | L2 | Rejected-Finance Being not lowest tenderer | |
| 3 | L3₹98.5 L+₹5.5 L (5.91%)Rejected-Finance | L3 | Rejected-Finance Being not lowest tenderer | |
| 4 | Rejected-Technical 901 GH 83 SECTOR 20 PANCHKULA 134116 | PANCHKULA | HARYANA | 134116 | - | Rejected-Technical Two class below |
Tender Value
₹1.3 Cr
EMD Value
₹2 L
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) Tughlakbad
HQ Commander Works Engineers Air Force, Tughlakabad PO Sangam Vihar New Delhi 110 080
IMPROVEMENT OF SNCOs MESS AND SINGLE LIVING ACCN PHASE-II (E-BOCK) AT BRD AF STN CHANDIGARH UNDER GE(AF) MC CHANDIGARH
2022_MES_526110_1
84175/E8/Token-12
Open Tender
Civil Works
Item Rate
500 days
GE(AF) MC Chandigarh
As per NIT/Tender Conditions
7 documents required · 7 mandatory
₹1,000
GE (AF) MC CHANDIGARH
₹2 L
Yes
30 Aug 2022
24 May 2022
28 Jul 2022
24 May 2022
26 Jul 2022
29 Jun 2022
60 days
Amount
B/R portion
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but exluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Material and labour for Brickwork with subclass 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Material and labour for Brickwork with sub-class `B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Taking down chowkhats or frames n .exc. 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames exc. 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.
Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per standard engineering practice complete all as specified and directed.
Supply and fix Factory Made Solid PVC Moulded Door Shutters with Particle board Core 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front Face & 2mm Prelam PVC sheet on back face, supplying & fixing in frame at site as per standard engineering practice complete all as specified and directed.
Supply and fix 100mm long butt hinges extruded aluminium alloy ISI marked, complete all as specified and directed.
Supply and fix 200mm long Aluminium, anodized, barrel tower bolts of extruded section, ISI marked complete all as specified & directed.
Supply and fix 150 mm long extruded aluminium alloy, handles, fabricated type, anodized,ISI marked complete all as specified & directed.
Supply and fixing 1.25mm thick press steel frames for doors with double rebates of size 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, includig tarring back of chowkhat & hold fasts complete as specified and directed.
M&L for cement concrete 1:3:6 type C-0 as in pressed steel frames complete all as specified and directed by Engineer-in-Charge.
Supply andf Fixing of 35mm thick Glazed and skeleton shutters, 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20, complete all as specified and directed.
Supply and fixing 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F butt hinge, 125 mm size, heavy duty weight cold rolled mild steel and fixed fixed to angle iron door frame by continiuous welding complete all as specified and directed
S&F Mild steel sliding door bolts of 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete alll as specified & directed.
Supply and fixing mild 375mm, ordinary rat tail rod pattern springs incluidng roller and roller plate complete all fixed to door shutter and pressed steel frame including necessary welding etc.complete alll as specified & directed
Supply and fixing 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, ISI marked with hard drawn steel spring, fixed in floor complete alll as specified & directed
Supply and fixing factory made box type steel window composite type with double rebate pressed steel frames 80mmx60mm (peripheral) and 80x75mm (intermediate members) made out of cold rolled 1.25mm thick sheet having steel window /ventilators double shutters of MS tubular section of size 50mmx20mmx1.1 mm thick fixed with box type hinges including 12mm x 3mm MS flat as beading for glazed and wire shutter handle of 100mm MS hollow tubular section as beading for wire and putty for glazing shutter handle of 100mm size made out of Z section 01 no, MS stove enamelled black tower bolt of size 120mm 02 nos , 150mm mild steel hooks and eyes , each shutter flat iron 40mmx1.25mm and 200mm long hold fast 04 nos each window including necessary filling frame with PCC (1:3:6) complete all as specified and directed .
Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete alll as specified & directed
Supply and fixing 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exceeding 0.5 sq.m in each pane complete alll as specified & directed
Supply and fixing 4mm thick Sheet glass, in repair ordinary quality and glazing with oil putty in square n exceeding 0.5 sq.m in each pane including hacking out old glass complete all as specified and dirfected
Supply and fixing mild steel framed work such as grills, gratings etc with ends of bars shouldered and or rivetted, or forged in to spikes; framed guard bars; barred iron doors; ladders; framed balusters; cooler stand, walk ways; railing; frameworks of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Taking down cement plaster of any description including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour Rendering 10 mm thick in cement mortar 1:6 on brick/concrete surfaces finished even and smooth without using extra cement including taking down cement plaster on brick walls and concrete surface and the like at any height including necessary scaffolding, ladder, formwork etc complete all as specified and directed.
Material and labour for Rendering 10mm thick on concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection,fascia,fins,parapet, waist slab on RCC staircase etc and similar likes at any height including necessary scaffolding, ladder, formwork complete all as specified and directed.
Material and labour Rendering 15 mm thick on concrete or dubbed surfaces in CM 1:4 finished even & smooth without using extra cement over chicken wire mesh 1.40mm dia of size 20mm and including dubbing out average 15mm thick in 1:4 CM on irregular face of walls, fascia, fins, parapet, soffits of chhajjas etc and similar likes at any height including necessary scaffolding, ladder & formwork up to height of 10m complete all as specified and directed.
Material and labour for 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, in two layers with backing coats 10mm thick and second coat of 5 mm thick with WPC, including necessery scaffolding etc at any height complete all as specified and directed. Note :- WPC shall be considered separately under only suppl.
Material and labour applying two coats of Oil Bound Distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty including preparation of newly plastered wall surfaces complete all as specified and directed.
Material and labour for complete removal of existing treatment wall surfaces and two coats of Oil Bound Distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty complete all as specified and directed.
Material and labour for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete at any height including necessary scaffolding all as specified and as directed.
Material and labour for Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.
Material and labour for two coats of synthetic enamel painting over a coat of pink primer on wooden surfaces of any description,over 10cm in width or girth not otherwise described including prepration to new or previously untreated surfaces.
Material and labour for two coats of synthetic enamel painting over a coat of red oxide primer on steel surfaces of any description, over 10cm in width or girth not otherwise described including prepration to new or previously untreated surfaces.
Material and labour for preparation of old painted surfaces and applying one coats of synthetic enamel painting on steel surfaces of any description,over 10cm in width or girth not otherwise described including prepration to old or previously treated surfaces.
Material and labour for First quality Non-skid Ceramic coloured tiles jointless, 7-8 mm thick (area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm) laid in floors with neat cement slurry @ 3Kg/Sqm over and including 15mm thick screed bed of cement mortar (1:6) and including pointing in white cement with pigment to match the shade of tiles including 25mm thick cement concrete type B0 1:2:4 (12.5 mm graded agregate) including dismantling of floor, hearth or wall tiling including cemetn mortar bedding complete all as specified and directed.
Material and labour for First quality Glazed ceramic coloured tiles in vertical surface 300x 450x 7 mm thick set and jointed in neat cement of required shape and size as in skirting/dado etc set and jointed in neat cement slurry over & incl 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match including dismantling of floor, hearth or wall tiling including cemetn mortar bedding complete all as specified and directed.
Material and labour for Machine cut kota stone flooring 20-25 mm thick (size of kota stone slab not less than 55cm X 55cm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over and including 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes and and including 25mm thick cement conrete type B-1, 1:2:4(12.5mm graded aggregate including ddemolition of existing kota stone floor/ tiles also in scattered places complete all as specified and as directed.
Material and labour for Machine cut kota stone 18-25 mm thick as in riser and treads of steps,skirting,dado including rubbing and polishing to mirror finish over and including 10mm thick backing plaster in CM 1:4 & roughening to conctere/terrazo surfaces and brushing the surfaces with neat cement slurry @ 3Kg/Sqm complete all as specified and as directed.
M & L Grinding & polishing of old kota stone floor/skirting with grinding machine including making good of joints filling with cement/pigment grout complete to achieve mirror polished surface all as specified and directed.
Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for including removing the rubbish outside defence land.
Supply and fix Mild steel TMT bar 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour Formwork to chullah hoods, chajjas, shelves troughs and similar items including edges, fins, louvers, fascia and parapets fair finished surfaces of concrete etc complete all as specified and as directed.
Material and labour for Reinforced cement concrete nominal mix type B1 (1:2:4) using 20mm graded aggregate as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and chajjas etc complete all as specified and directed.
Material and labour for Pre Polished Baroda Green marble slabs 18-20mm thick fixed as in cup board shelves including embedding in brick wall in cement mortar 1:3.
Material and labour for cup boards steel shutter having 1.00 mm thick MS plain black sheet, locking arrgement with MS chromium plated handle mechanism and shutter fixed with purpose made hinges and Pressed Steel frame having profile size of 85x60x1.25mm thick fixed in wall,Each shutter is strengthen with 1.00mm thick sheet beam presed in C shape having girth of 150mm, with built in 5.0mm thick mirror of size 400mm x 1200mm in one shutter of each cup board ,1 No stainless steel drappary rod of 20mm dia with brackets, 1 No Stainless steel peg set of 3, including powder coating to complete cupboard frame & shutter (inner & outer) sample approved by GE including 50mm long 4 lever brass mortice lock with 2 keys of make Harrison/Godrej/Link all as specified and as directed.
Supply and fix Aluminium anodized alloy curtain rods of 20mm dia including SS holding brackets and Decorative/ornamental Bulbs/cups including taking down the existing rods complete all as specified and directed
Taking up or down 15mm bore steel tubing and connections.
Supply and fix 15mm bore steel water tubes, `medium grade' galvanised ISI marked, with all fitting and fixed complete to roof, walls and ceilings or laid in floors complete all as specified and directed
Taking up or down 20mm bore steel tubing and connections.
Supply and fix 20mm bore steel water tubes, `medium grade' galvanised ISI marked, with all fitting and fixed complete to roof, walls and ceilings or laid in floors complete all as specified and directed
Taking up or down 25mm bore steel tubing and connections.
Supply and fix 25mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to roof, walls and ceilings or laid in floors complete all as specified and directed
Supply and fix 2000 Ltr capacity double layered ISI Marked rotational moulded polyethylene water storage tanks (cylindricall) vertical with closed top and with outer face white in colour hoisted and fixed in position all as specified in SSR Part-I and including dismantling of existing water tank complete all as specified and directed.
Supply and fix 500 Ltr capacity double layered ISI Marked rotational moulded polyethylene water storage tanks (cylindricall) vertical with closed top and with outer face white in colour hoisted and fixed in position all as specified in SSR Part-I and including dismantling of fexisting water tank complete all as specified and directed.
Supply and fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (exluding fixing bolts, flushing cistern and flush pipe) including white seat cover fixed with mild steel chromium plated hinging devices, flushing jet spray & CI P or S trap complete all as specified and directed.
Supply and fix CP toilet paper holder ISI marked including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed
Supply and fix in repair vitreous China wash down water closet (squatt pan) orissa squatting pattern pan of size 580mm x440mm white with integral foot rests etc including P or S trap complete all as specified and directed.
Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, low level 10 lit capacity, white, with inlet, ball valve, float,handle including PVC Bend or pipe and brackets.
Supply and fix in repair Vitreous China wash basin, oval type counter top size 600 x480mm exluding taps, but including MS brackets, 32mm dia CP waste coupling & PVC pipe of suitable length.
Material and labour Granite 20 mm thick (of any type) table rubbed & polished in steps , jambs, cills, shelves etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and inculding Screed bed or bedding of layer of mortar 15 mm thick in CM 1:4 for laying of floor finishes complete all as specified and as directed .
Rounding to edges of stone slabs one edge including griding and polishing to mirror finish such as in steps, cooking platform and other similar situations complete all as specified and directed.
Supply and fix 15mm bore CP fancy type wall mixer for mixing hot & cold water cast copper alloy with capstan handle, screwed down for iron pipe and fixed on wall complete all as specified and directed.
Supply and fix 15mm bore CP fancy type Basin mixer for mixing hot & cold water cast copper alloy with capstan handle, screwed down for iron pipe and fixed on WHB complete all as specified and directed.
Supply and fix CP overhead rain shower rose 125mm size with 450mm long CP overhead shower arm with wall flange.
Supply and fix CP Towel rail 600 mm long fixed with and including chromium plated brass screws and wooden/plastic cleats.
Supply and fix in repair CP fancy type bib taps 15mm bore, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
Supply and fix CP fancy type Stop valves 15mm bore, cast copper alloy screwed down high presure, with capstan handle, screwed both ends for iron pipe or for unions and fixed.
Supply and fix CP fancy type Stop valves 15mm bore, with long shank and cup (concealed type) cast copper alloy screwed down high presure, with capstan handle, screwed both ends for iron pipe or for unions and fixed.
Supply and fix Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions, and fixed in repair suitable for 20 mm bore tubes, complete all as specified and directed .
Supply and fix Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed & suitable for iron pipe 20 mm bore, (Minimum weight 210 gm) complete all as specified.
Supply and fixing in repair Vitreous China Urinal, Half stall type, white including 32mm dia galvanized MS waste pipe of suitable length and brass urinal spreader and doom type stainless steel waste coupling 32mm dia (exluding flushing cistern, flush pipe) and fixing of (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, and Union for discharge except pipes.
Supply and fix 15mm long PVC connection 600mm long with PTMT nuts and rubber washer standard all as specified and directed.
Supply and fix PTMT Grating doom 125mm dia with waste hole of PTMT(Minimum weight 40 gms) complete all as specified and directed.
Supply and fix Soap Dish vitreous China whate approximate size 160 x 160x 90mm, complete all as specified and directed.
Supply and fix Stainless steel peg set of 5 hooks including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms).
Supply and fix Cast iron soil, waste and vent sand cast pipe 100 mm bore, in any length, with or without ears, with cement joints, fixed to wall including dismantling and taking out of existing unserviceable CI pipes complete all as specified and directed.
Supply and fix Cast iron soil, waste and vent sand cast pipe 75 mm bore, in any length, with or without ears, with cement joints, fixed to wall including dismantling & taking out of existing unserviceable CI pipes complete all as specified and directed.
Supply and fix Cast iron floor trap 75 mm in REPAIRS, marked, including jointing to soil waste pipe in cement concrete 1:2:4 type B-1, complete all as specified and directed.
Supply and fix Cast iron bends 100 mm bore, with oval access door diminishing pieces or tapers, complete all as specified and directed.
Supply and fix Cast iron bends 75 mm bore, with oval access door diminishing pieces or tapers, complete all as specified and directed.
Supply and fixing in repairs 100 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.
Material and labour Plain cement concrete (1:5:10), type E-2, using 40 mm graded brick aggregate as in mass concrete (sunken portion) including demolition of existing concrete surface complete all as specified and directed.
Material and labour 50 mm thick plain cement concrete type B-0 (1:2:4) using 12.5 mm graded crushed stone aggregate as in floor, etc including necessary form work complete all as specified and directed.
Material and labour for providing water proofing tratment of sunken portion of WC, bathroom etc. applying cement slurry mixed with Acrylic based polymer modified cementitious composite compounded coating of make as approval in Technical Instruction 5/2003 adding: (a) 15mm thick rendering CM (1:4) with Liquid water proofing compound 200 ml per 50kg bag of cement on floor and wall , finishing the surface even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (b) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @ 0.242 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ .126 kg/sqm. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs including dismantling of existing tratment etc complete all as specified and directed. Note: water proofing compound shall be measured and paid separatelly , contractor's quoted rate shall deem to include all other items mentioned above .
Material and labour for 35mm thick Providing precast cement concrete Type B-0 1:2:4 (12.5 mm graded aggregate) as in louvres and jallies, Set in Cement Mortar 1:4, complete all as specified and as directed.
Supply and fixing Salt-glazed stoneware gully traps 150x150mm, square or round mouthed, type `P' including cast iron grating of suitable size jointing to soil waste pipe in cement concrete 1:2:4 type B-1, complete all as specified and directed. Note: Rate for excavation & earthwork shall be deemed to include in the composite rate of this item.
Supply and fixing 100mm bore Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof including two coats of synthatic enamel paintover a paint of red oxide primer.
Supply and fixing 75mm bore Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof.
Cutting holes in brick walls built in cement mortar not exceeding Half brick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.
Supply and fixing Figured, Pin head glass 4.0 mm thick, fixed to aluminium frame of ventilator /window etc including necessary snap beading and rubber gasket required complete all as specified and directed.
Demolition of Cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L PCC 1:2:4 type B-2 75 mm thick (40 mm graded stone agg ) finishing cement concre surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
M&L for filing joints with bitumen sand mastic (size 10mm width x 25mm depth) comprising 1 part of sand & 3 part of bitumen in cement concrete flooring complete all as specified and as directed
Supply and Fix 100mm dia cast iron cowls complete all as specified and as directed
Supply and Fix 75mm dia cast iron cowls complete all as specified and as directed
M&L for applying two coat of cement base paint over a one coat of primer including Preparation of new decorative plastered surfaces of wall/ ceiling complete all as specified and directed.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per specified and directed. (Glazing, paneling to be paid for separately) :
(A) For Frame : Powder coated aluminium (minimum thickness of powder coating 50 micron)
(B) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required : Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per specified and directed. . (Cost of aluminium snap beading shall be paid in item no. 1.101) : 5.5mm thick sheet glass of ordinary quality
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete as per specified and directed. NOTE:- Payment shall only be made when contractor submit the Purchase Voucher to GE
M&L for racking/pointing to block in stone masonary work built in cement mortar 1:4 complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
Internal Electrification
Taking down carefully old unserviceable point wiring (Light, fan, socket or power complete (including fittings such as switches, ceiling roses, pendants, regulator, sockets, light fittings etc) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed
Taking down carefully by unscrewing the unserviceable sheet metal enclosure, DB boxes complete with MCCB/MCB SP, SPN & TPN etc all as directed.
Taking down the sub main wiring of any size complete removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed and specified.
Material and labour in replacement for point wiring (concealed) in and including rigid non metallic PVC medium grade conduit ISI marked, 19/20 mm dia/suitable size as per site reqmt including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable, ISI marked in and including flush type metal boxes modular type with cover plate suitable for fixing modular switches, sockets, fan regulators etc with brass screw, cup washer and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as earth wire connected to common earth and earth dolly as per IS specification and as specified for the One light/fan/bell point controlled by one switch.
All as per item No 2.04 above but for one 3 pin socket outlet 6 Amp on same board
All as per item No 2.044 above but for one 3 pin socket outlet 6 Amp on independent board
Material and labour in replacement for point wiring (concealed) in and including rigid non metallic PVC medium grade conduit ISI marked, 19/20 mm dia/suitable size as per site reqmt including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 4.0 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable, ISI marked in and including flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulators etc with brass screw, cup washer and including PVC insulated unsheathed multi stranded copper conductor cable of 4.0 sqmm as earth wire connected to common earth and earth dolly as per IS specification and as specified for the socket outlet having provn for 3 pin 15 amps on the independent board.
S&F switch modular, 1 module single pole one way 6 Amp, ISI marked complete all as specified and directed.
S&F switch modular, 1 module single pole one way 16 Amp ISI markedcomplete all as specified and directed.
S&F modular socket 2/3 pin combined 6 Amp multipurpose, 2 module ISI marked complete all as specified and directed.
S&F modular socket 2/3 pin combined 6/16 Amp multipurpose, 2 module complete all as specified and directed.
S&F step regulator modular type 2 module for ceiling fan of any sweep ISI marked complete all as specified and directed.
Supply and fix ceiling rose 3 pole/PVC/polycarbonate, isolated body ISI markedcomplete all as specified.
S&F LED Flood light fitting 60 watts to be fixed to channel and as reqd to be mounting bracket on wall/roof to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Engr-In-Charge.
Taking down ceiling fan of any size after disconnecting from the ceiling rose, shifting to store for safe custody and rehanging the same after cleaning/greasing at the designated location and making connection complete all as directed and specified.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F decorative wall mounting antique brass finish fixture with opal glass diffuser suitable for 7.5 W A60 LED filament lamp E27 base study lamp complete .
S& F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
S&F LED bulb 9 W with B22 base 5 star rated ISI marked complete.
Supply & fix in replacement sheet metal enclosure double door vertical TPN DB 8 way with 200 Amp rated bus bar IP 43 protection, cement spill protector, door earthing including MCCB TPN 100 Amp 25 KA with thermal magnetic release manual fixed type as incomer complete all as specified. Make : C&S/ Havells/ABB
Supply and fix in replacement MCB DB TPN 415 V 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection nautral link, earth bar and Din rail double door complete all as specified and as direcrted.
Supply and fix in replacement MCB DB SPN 4 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted.
Supply and fix in replacement MCB DB SPN 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted.
Supply and fix MCB SP 6 to 32 Amps, ISI marked complete all as specified and as direcrted.
Supply and fix MCB SPN 40 to 63 Amps ISI marked complete all as specified and as direcrted.
Supply and fix MCB TPN 100 AMP ISI marked complete all as specified and as direcrted.
S&F exhaust fan metal body with louver shutter 380 mm sweep 1400 rpm heavy duty AC single phase 230/240 volts including necessary connection with 3 core copper conductor of size 1.5 sqmm from ceiling rose & cutting hole in brick wall and making good disturbed area all as specified and directed.
Material and labour for four single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 16 sqmm as sub main wiring including suitable size medium duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 2 x 16 sqmm as an earth continuity conductor complete all as specified.
Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as sub main wiring including suitable size medium duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified.
Supply, installation and testing of desert cooler of 4000 cfm made out of dynamically balanced aluminium blade for better and efficient air delivery with 18 guage sheet metal body including built in water tank of suitable capacity, fan, water pump, wood wool as cooling medium 3 step speed controller operated on single phase AC supply including necessary connection etc complete all as directed.
M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire of dia 4 mm by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No 3 of SSR-2009 (Part-I). Note :-THe Earth value/result should be less than 5 ohms.
External Electric Supply
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3.5 core complete all as specified and directed
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed
Excavation in trenches for laying underground cables, poles and stays in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m deep and getting out complete all as specified and directed
Returning, filling in, including speading, levelling,watering and well ramming in layers not exceeding 25cms thick complete all as specified and directed
Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed
Sand cushioning to under ground cable provided with a layer of 8cm deep before laying the cable and 15cm deep after laying and stretching the cable complete all as specified and directed
Brick covering with common burnt clay bricks old size laid as width equal to length of brick for protection to cables with well burnt sub class 'B' bricks laid dry flat all as directed.
Supply, install, testing and commissioning of factory made LT panel of suitable size, CPRI approved outdoor double door type for LT distribution floor mounted, totally enclosed cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thickness 3.00 mm complete with bus bar chamber having openable front and rear shutters with suitable locking arrangements of shutters, duly powder coated. LT panel shall have angle iron frame 50x50x6 mm of 600 mm height to be embeded in PCC 1:2:4 not less than 300 mm complete including making connection of all incoming and outgoing cables with suitable size of lugs, glands etc and necessary earth work.all as specified and directed with the following components:-
S&F Tubes 80 mm dia, 'light grade' galvanised ISI marked, with all fitting and fixed to walls and ceilings complete or laid in floors all as specified and directed by Engr-in-Charge
Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.5 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, including GI strip 32 x 6 as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 40 mm dia light grade GI protection pipe and watering pipe 20 mm dia med grade with funnel and wire mesh including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc complete all as directed and specified. Note : The earth value/result must be less than 5 ohms.
Hot Water Supply
Supply and fix electric water heater, storage type steel body with corrosion resistance inner tank and anti scaling heating element capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc. complete all as specified and directed by Engr-in-Charge.
Supply and lay pipe galvanized, “Medium class”,ISI marked including fittings 20 mm (3/4”) dia complete all as specified and directed
Supply and lay pipe galvanized, “Medium class”,ISI marked including fittings 15 mm (1/2”) dia complete all as specified and directed
Supply and fix Valve, stop, screwed,20 mm (3/4”) dia pipe ISI marked complete all as specified and directed
Supply and fix Valve, stop, screwed,15 mm (1/2”) dia pipe ISI marked complete all as specified and directed
Supply and fix Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, for iron pipe or for brass ferrule and fixed for size 15 mm (1/2”) dia pipe complete all as specified and directed
Schedule of Credit
MS SACHDEVA BUILDERS
shree balaji builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .