RENOVATION OF IGS LABS AT PFT TO HLL HERITAGE MUSEUM (Re-tender)

CIVIL WORKS

PLUMBING WORKS

ELECTRICAL WORKS

FIRE FIGHTING WORKS

BUILDING SIGNAGES

DSR code

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately).Second class teak wood. 35 mm thick shutters

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 8mm thick Toughened glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)

Providing and fixing a 4-panel teak wood sliding foldable door with 40mm thick shutter including teak wood frame of overall size 2250 mm (W) × 2100 mm (H), comprising four equal panels, with two panels sliding and folding to the left and two panels sliding and folding to the right, complete with all necessary hardware, fittings, fixing accessories, alignment, adjustment, testing and commissioning, including all screws, fasteners, anchors and consumables, Melamine polish with primer, as per the approved drawings and the direction of the Engineer-in-Charge. Rate is inclusive of all complete. The sliding folding door system shall include the following accessories: Top Track (extruded Aluminium) – 1 No Bottom Track (extruded Aluminium) – 1 No. Sliding Folding System – Fixed Assembly (SS 304 grade) – 2 Sets Sliding Folding System – Moving Assembly (SS 304 grade) – 2 Sets Concealed 3D Hinges (SS 304 grade ) – 2 Sets Top track shall be embedded in the frame and bottom track embedded on the floor without damaging the floor . The door shall operate smoothly with synchronized sliding and folding action from the centre towards both sides, ensuring proper alignment, easy operation, and complete functionality. The rate shall include supplying, fixing, installation, adjustment, lubrication, testing, and commissioning of the complete sliding folding door system, including all complete, required for satisfactory performance as directed by the Engineer-in-charge. Make: EBCO National recovery Center (Base rate - Rs. 49700/-)

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :125x64x2.50 mm

Finishing wood work with Melamine polish with thinner (30%) : New work (Two or more coat applied @ 2.2 ltr/10 sqm) over and including two coats of melamine sealer with thinner (30%) @ 2.2 ltr/10 sqm and wood filler wherever required all complete as per the direction of engineer in charge (Make: Nippon /Asian Paints / Berger)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointing

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, flooring, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over 0.50 sqm.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement::4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish Size of Tile 600 x 600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of tile 300mmX600mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing & fixing of terracotta roof tile of Size 40x25 cm, thickness not less than 20 mm as per approved pattern on steel frame work including painting complete (steel frame work to be paid separately).Tile pattern, colour, shade and layout shall be as approved by the Architect. (Base rate of terracotta clay tile - Rs. 35/-per no)

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).Tile pattern, colour, shade and layout shall be as approved by the Architect

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Flashings/ Aprons for valleys of roof .( Upto 600 mm)

Clay Tile Ceiling Installation - Providing and fixing terracotta clay under-deck ceiling tiles of nominal size 300mm x 200mm and thickness 13mm to 15mm. Tiles must be sound, well-burnt, regular in shape, and free from cracks . Installation includes interlocking tiles on to the existing framework, securing each tile safely with non-corrosive copper/GI tie-wires or specialized brackets, maintaining perfect lines, levels, and slopes as per architectural drawings including painting of tiles all complete .Rate of framework shall be paid separately (Tile pattern, colour, shade and layout shall be as approved by the Architect) (Base rate of terracotta clay tile Rs. 32/-per no)

Providing and fixing eave board with 2nd class teak wood plain lining with approved carving and design including cost of all materials, priming coat, labour charges for making and fixing in correct line and level as per the direction of Engineer in Charge . 40 mm thick

Providing and fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flanged of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45x15x0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27 mm high having flages of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of day wall screws of size 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitable fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with.a.8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through acutoclaving process.

Providing and fixing waterproof marine plywood false ceiling with 10-12 mm thickness of approved make, cut to the required size and securely fixed using suitable screws, bolts, premium adhesive , and all necessary hardware complete. The item shall include 3-4 mm thick natural wood veneer laminated over the plywood surface, with all cutting, matching, edge finishing, and polishing carried out to achieve a seamless appearance. The work shall also include providing and fixing GI support framework wherever required, fabricated from 40 × 40 mm and 20 × 40 mm GI sections, cut, welded, aligned, and securely anchored to the substrate. All GI members shall be cleaned, treated with one coat of zinc/chromate primer and finished with two coats of synthetic enamel paint of approved shade. The rate shall include all materials, labour, fasteners, adhesives, hardware, cutting, fabrication, welding, transportation, wastage, scaffolding (if required), and all incidental works necessary to complete the item as per the approved drawings and directions of the Engineer-in-Charge. (Laminate pattern, colour, shade and layout shall be as approved by the Architect) (Base rate of marine plywood ceiling - Rs. 1400/-per Sqm)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm

Providing and fixing bright finished brass handles with screws etc. complete: 600 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Providing and fixing SS baby latch 4 inch for doors with necessary screws etc. complete

Providing and fixing SS knob with cylindrical lock 75mm dia of approved quality with necessary screws etc. complete.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

12 mm cement plaster on single brick/block or half brick/block wall of mix : 1:4 (1 cement: 4 coarse sand) to the inside of walls

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster including providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Extra for providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Removing varnish or any polish from the wooden doors/windows/ventilators etc by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm

Providing and fixing bright finished brass hard drawn hooks and eyes : 200 mm

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling 15 to 110 mm dia C.I/G.I./PVC pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, circular, rectangular, angles, tees and flats etc

Dismantling and removing existing Mild Steel (MS) window grills from the window frames without causing damage to the existing frame, masonry, plaster, or finishes. The rate shall include all labour, tools, making good minor damages caused during dismantling. The dismantled MS grills shall be stacked within the site premises and it will remain the property of the department/client and shall be handed over as directed by the Engineer-in-Charge.

Dismantling roofing including ridges, hips, valleys and gutters etc., within 50 metres lead of: shingles G.S. Sheet

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 5 km initial lead, for all leads including all lifts involved.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 square centimetres and above

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area 40 square centimetres and above

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Demolishing laterite/brick work/Solid block manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialv within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling tile work in floors, walls and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

Providing and laying Terracotta Floor Tiles (Glossy finish)(thickness to be specified by the manufacturer) of approved make, in all colours and shades, conforming to relevant Indian Standards wherever applicable, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of tile : 30x30 cm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 300x300mm

Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing, laying, maintaining and removing tarpaulin sheet for protection during roof dismantling works by covering the exposed roof area with heavy-duty waterproof HDPE/PE laminated tarpaulin sheets of minimum 200 GSM (or approved equivalent), securely fixed over suitable timber battens, GI pipes, ropes, nylon cords, sandbags or other approved anchoring arrangements to prevent displacement due to wind. The work shall include providing adequate overlaps, sealing joints wherever required, ensuring complete protection of the building interior against rainwater ingress, periodic adjustment, maintenance, and immediate repositioning during the entire period of roof dismantling and renovation works. The rate shall include all materials, labour, tools and tackles, scaffolding/lifting arrangements if required, watch and ward, replacement of damaged sheets, and removal of the tarpaulin after completion of roofing works, including cleaning the site, complete as per the directions of the Engineer-in-Charge. The tarpaulin protection shall be maintained continuously until the permanent roofing system is installed and made completely watertight.

DSR code

Flexible pipe32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Make: Modiguard / Saint Gobain (Base rate - Rs. 665/-)

Providing and fixing toilet paper holder: C.P. brass

Providing and fixing white vitreous china extended wall mounting rim less water closet with cistern of size 385x650x800mm or nearest of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete. Make: Jaquar SLS-WHT-6953BIPPSMN (Base rate - Rs. 11600/-)

Supplying and fixing Low flow Health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe (Make: Jaquar)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions: 30 cm length 15 mm nominal bore

Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore (Make: Jaquar)

Supplying and fixing PVC Floor Trap 100mmx75mm size with SS grating of approved quality of Rectangular type with openable circular lid : 150 mm nominal size square with 100 mm diameter of the inner hinged round grating including cutting open, boring through RCC slabs if needed and making good the damages, all complete as per the direction of Engineer-in-Charge. (Make: Finolex/Supreme)

Providing and fixing PVC Gully Trap with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 160x100 mm size P type with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Make: Finolex/Supreme/Astral/Prince)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal dia pipes (Make: Finolex/Supreme/Astral/Prince, Base rate - Rs.120/mtr)

Supply and fixing PVC 10kgf sanitary concealed pipes and specials , jointing with solvent cement and fixing them on slabs, floors etc. in position for connecting various fixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) and specials with brick or CC supports wherever necessary including cutting and chasing brick walls as required, making good the same with brick in CM 1:6 and plastering with CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete, complete : 50 mm diameter (Make: Finolex/Supreme/Astral/Prince)

Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing with solvent cement and fixing them on slabs, floors etc. in position for connecting various fixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) and specials with brick or CC supports wherever necessary including cutting and chasing brick walls as required, making good the same with brick in CM 1:6 and plastering with CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete, complete : 75 mm diameter (Make: Finolex/Supreme/Astral/Prince)

Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing with solvent cement and fixing them on slabs, floors etc. in position for connecting various fixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) and specials with brick or CC supports wherever necessary including cutting and chasing brick walls as required, making good the same with brick in CM 1:6 and plastering with CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete, complete : 110 mm diameter (Make: Finolex/Supreme/Astral/Prince)

DSR code

Wiring for circuit/submain wiring along with earth wire with the following sizes of HFFR PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

MCCB, MCB & DBs

EARTHING

LIGHT FITTINGS AND FANS

MISCELLANEOUS ITEMS

DSR code

DSR code

Illuminated Round logo Acrylic (Door top signage) at the HLL Heritage Museum , made of minimum 4mm thick clear acrylic sheet with laser cut , letters and logo acrylic inner cut and pasting. back lit illuminated with 2w led (impex plus) Warm W. Power supply make: Impex (Two-year warranty.) Logo Size: 56x56cm (Signage make- 3M,LG)