Loading…
Loading…
Tender Value
₹2.6 Cr
EMD Value
₹2.6 L
Closing Date
15 Jul 2026, 6:00 pm
Similar tender results from the same govt authority in the past 3 years.
Secretary, Sports Authority of Gujarat, Gandhinagar,
Construction of Study Hall Building at Dhrangadhra Dist.Surendranagar
317259
07 of 2026-27
Open
Civil Works
Gandhinagar
3 documents required · 3 mandatory
₹4,248
Secretary, Sports Authority of Gujarat, Gandhinagar payable at Gandhinagar
₹2.6 L
24 Jun 2026
24 Jun 2026
24 Jun 2026
15 Jul 2026
24 Jun 2026
NAME OF WORK : CONSTRUCTION OF STUDY HALL BUILDING AT DHRANGADHRA DIST.SURENDRANAGAR
Qty Item of Work In Rupees Unit Amount In Words
Demolition including stacking of serviceable materilas and disposal of Rupees One Thousand Thirty
unserviceable materials with all lead and lift. (i)R.C.C. work Paise EightyOne Only
Demolition of Brick work and stone masonry including stacking of serviceable
Rupees Five Hundred ThirtySix
2 19.70 materilas and disposal of unserviceable materials with all lead and lift.(ii) In 536.09 cum
Paise Nine Only
Dismentaling tiled of stone floors laid in mortar including stacking of serviceable
Rupees FourtySix Paise
3 154.18 materilas and disposal of unserviceable materials with all lead and lift. 46.77 Sqm
SeventySeven Only
Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking
Rupees FourtySix Paise
4 114.40 of serviceable materilas and disposal of unserviceable materials with all lead and 46.77 Sqm
SeventySeven Only
lift.(i) Polycarbonate fabric sheet roofing.
Dismentling steel work including distempering and stacking the materials with all Rupees Three Paise SixtySeven
lead and lift. Only
Removing old paint / colour from walls (interior and exterior) by hand scraping,
using scrapers, wire brushes, sandpaper, or other approved manual tools,
Rupees TwentyThree Paise
6 875.28 including cleaning the surface, removing loose, flaking, or peeling paint, and 23.23 Sqm
TwentyThree Only
disposing of scrapings outside the premises, complete as per directions of
Engineer-in-Charge.
Clearing and grubbing road land including uprooting rank vegetation grass
Rupees TwentyEight Thousand
bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees
7 0.06 28,393.04 Hec Three Hundred NinetyThree Paise
cut earlier and disposal of unserviceable materials (C) By mechanical means in
area of light jungle
Excavation for foundation upto 1.5 m depth including sorting out and stacking of
Rupees One Hundred Seventeen
8 418.33 useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) 117.08 Cum
Paise Eight Only
Loose or soft soil
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and
Rupees One Hundred TwentyNine
9 186.73 stacking of useful materials and disposing off the excavated stuff upto 50 Meter 129.81 Cum
Paise EightyOne Only
lead.(A) Loose or soft soil
Filling available excavated earth (excluding rock) in trenches. plinth, sides of
Rupees One Hundred Thirty Paise
10 299.07 foundations etc. In layers not exceeding 20 cm. in depth consolidating each 130.39 Cum
ThirtyNine Only
disposited layer by ramming and watering.
Filling in foundation and plinth with murrum or selected soil in layers of 20cm.
Rupees Two Hundred EightyTwo
11 192.26 thickness including watering, ramming and consolidating etc. complete. 282.02 Cum
Filling in plinth with sand under floors including watering ramming, consolidating
Rupees Four Hundred
12 57.01 and dressing complete 424.90 Cum
TwentyFour Paise Ninety Only
Applying general insecticide pest control treatment to floors, cupboards etc
including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS
part -II( (0.075% concentration by mass) is recommended 10.5ml chemical diluted Rupees ThirtySeven Paise
with 5 liters of water application 0.5 litre chemical /Sqm of surface is TwentyThree Only
recommended as per I.S. (The Product Performance Shall Carry Guarantee for
P.C.C : Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4-
Rupees Three Thousand Seven
graded stone aggregates 20 mm nominal size) and curing complete including cost
14 150.82 3,797.13 Cum Hundred NinetySeven Paise
of formwork in (A) Foundation and Plinth
Providing and laying controlled cement concrete M.250 concrete With all lead,
including all transportation, pumping, pouring, curing of concrete etc complete
Rupees Four Thousand Nine
including the cost of formwork but excluding the cost of reinforcement for
15 60.69 4,914.56 Cum Hundred Fourteen Paise FiftySix
reinforced concrete work in M300 all RCC element like foundation,
(A) Footing, at all floor level from below plinth and above plinth level
Providing and laying controlled cement concrete M.250 concrete With all lead,
including all transportation, pumping, pouring, curing of concrete etc complete
Rupees Six Thousand Three
including the cost of formwork but excluding the cost of reinforcement for
16 90.61 6,375.67 Cum Hundred SeventyFive Paise
reinforced concrete work in M250 all RCC element lik, © Slabs, landing, shelves,
SixtySeven Only
Balconies, Girders and Cantilever all floor level.
Providing and laying controlled cement concrete M.250 concrete With all lead,
including all transportation, pumping, pouring, curing of concrete etc complete
Rupees Six Thousand One
including the cost of formwork but excluding the cost of reinforcement for
17 121.88 6,105.81 Cum Hundred Five Paise EightyOne
reinforced concrete work in M250 all RCC element lik © Slabs, landing, shelves,
Balconies, Lintels, Beams, Girders and Cantilever all floor level.
Providing and laying controlled cement concrete M.250 concrete With all lead,
including all transportation, pumping, pouring, curing of concrete etc complete
Rupees Seven Thousand
including the cost of formwork but excluding the cost of reinforcement for
18 69.99 7,087.78 Cum EightySeven Paise SeventyEight
reinforced concrete work in M250 all RCC element lik © Landing, Stair case,
Lintels, Copping, Beams, Girders, shelves,Balconies, and Cantilever all floor level.
Providing and laying controlled cement concrete M.250 concrete With all lead,
including all transportation, pumping, pouring, curing of concrete etc complete Rupees Five Thousand Seven
19 73.20 including the cost of formwork but excluding the cost of reinforcement for 5,776.68 Cum Hundred SeventySix Paise
reinforced concrete work in M250 all RCC element lik (D) Columns, Pillars posts SixtyEight Only
and struts, all floor level.
GRADE SLAB (M200) : Providing and laying controlled cement concrete M.200
Concrete with all lead, including all transportation, pumping, pouring, curing of Rupees Four Thousand Six
20 40.40 concrete etc complete including the cost of formwork but excluding the cost of 4,662.08 Cum Hundred SixtyTwo Paise Eight
reinforcement for reinforced concrete work in M200 Grade Slab Only
Qty Item of Work In Rupees Unit Amount In Words
Constructing Under Ground water tank with Providing and laying controlled
cement concrete M250 mix for R.C.C. work including reinforcement, boxing,
centering, vibrating, curing and mixed with approved water proofing cement
compound or "CEMWET" or "PIDICRETE LW" integral water proofing admixture as
water proofing agent to be mixed with 50 kgs. bags shall be as recommended by
the manufacture of the water proofing material, concrete work for top, bottom
slab & side pardi, column, beam for under ground water tank item incl. 300mm
Free Board and Necessary excavation & refilling the available earth, raft thickness
Rupees Thirteen Paise FourtyFour
21 75000.00 250mm & wall thickness 230mm ., Sunctipn Pit size 600mmX600mmX600mm 13.44 Litr
water proofing cement plaster 20mm thick Double Coat with smooth finishing &
Glazes tile Dedo, vata 10cm X 10cm , 50mm thick cement concrete flooring
watering etc. Comp. to all face of tank. including locking arrengement outlet,
inlet, overflow and washout outlet pipe arrengement as necessary & C.I. Cover
0.60 x 0.45 weight not less then 35 kg with locking arrengment.C.I. steps etc.
comp as per structural detail drawing Including thermo Mechanically treated bars
(TMT BARS) Fe 500/500D as directed by Eng-in-charge.) 75,000 LITER CAPACITY.
(50 Kl Fire Tank & 25 Kl UGWT)
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,
Rupees SeventySix Paise
22 65748.05 binding and placing in position complete. upto floor two level 76.21 Kg
Brick work using common burnt clay building bricks having crushing strength not
Rupees Four Thousand
23 27.76 less than 35 kg./Sq.Cm. in foundation and plinth, in Cement Mortar 1:6 (1- 4,021.02 Cum
TwentyOne Paise Two Only
Cement : 6 -fine sand) (B) Conventional
White Stone Bela mesonry block in course in superstructure with stone of
approved quality in Lime Mortar 1:6 (1-Cement : 6- course sand) including with Rupees Four Thousand Nine
24 198.46 precast concrete block in superstructue above plinth upto floor two level. packing 4,995.35 Cum Hundred NinetyFive Paise
the joints etc. complete. (4680.24+265.65 = 4945.89) ThirtyFive Only
White Stone Bela mesonry work in partition walls upto 15 cm thickness in cement
Rupees Four Hundred FiftyEight
25 304.62 Mortar 1:4 ( 1- Cement : 4- course sand). in foundation, plinth and superstructure 458.81 Sqm
Paise EightyOne Only
Providing 10mm thick cement plaster in single coat on brick/concrete walls for
interior plastering upto floor two level and finished even and smooth in (i)
Cement mortar 1:3 (1-cement:3-sand), interior plastering above floor two level Rupees One Hundred SixtyThree
for every additional storey height. all type of scaffolding , tools, tackles etc Paise FiftyThree Only
complete. (For all floor) (137.34 + 24.57 = 161.91)
Providing 20 mm thick double coat mala cement plaster on interior and external
brick / concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing Rupees Two Hundred Seventy
and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) Paise FourtyThree Only
finished with trovel including all level, scaffolding, curing, tools, tackles etc
complete. ( For all floor )
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of
single or half brick walls for interiorplastering upto floor two level and finished Rupees One Hundred
even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) FourtyThree Paise Two Only
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of
single or half brick walls for interior plastering upto floor two level and finished
even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) plastering on Rupees One Hundred SixtyThree
ceilings and sofits of stairs upto floor two level instead of plastering on walls. all Paise EightySix Only
type of scaffolding , tools, tackles etc complete. (For all floor) (141.60+20.64=
Providing and fixing G.I. hexagonal chickenmesh of size 16 x24 of 22 gauge at
junction of concrete and brick work or between different materials after making
"V" grove between two different material surface and filled with rich cement
mortar and @ 100mm on each side of surfaces including necessary "U" nails /
Rupees Two Hundred ThirtyTwo
30 114.10 screws / washers with cleats for fixing, overlaps, scaffolding at all floors / all levels 232.79 Sqm
Paise SeventyNine Only
/ all heights / all shapes etc. complete as per drawing / specifications and
direction of Engineer-in-charge. For civil, plumbing, electrical & infrastructure
Providing and applying external finish of average 2 to 2.5mm thick acrylic polymer
based texture and pattern with standard tool and applicator as specified by
manufacturer on exterior surfaces at all heights including scaffolding to give even
shades including thoroughly brushing the surfaces free from mortar droping and
other foreign matter and sand paper smoothed etc. complete as per the
Rupees Three Hundred One Paise
31 2022.60 manufacture specifications and up to the satisfaction of Engineer in-charge/ 301.99 Sqm
NinetyNine Only
Architect. The rate includes making of grooves, pattas and finishing as directed by
Architect/ EIC. Paint shall be measured and paid in seperate tender item. (Item
should be executed by approved applicator only.)
Providing and laying six courses water proofing treatment with bitumen felt over
roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15
conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of
area respectively, second and fourth courses of roofing felt type 3 grade I
conforming to IS : 1322 (Hessian based self finished bitumen felt) , sixth and final Rupees Six Hundred EightyOne
course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic Paise Eighty Only
decimeter per sqm including preparation of surface but excluding grading,
complete.(The Product Performance Shall Carry Guarantee for 5 Years Against
Qty Item of Work In Rupees Unit Amount In Words
Providing and laying broken chine mosaic flooring for terrace using 12 mm to
mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or
slope and to be tempered to bring mortar creme out upto surface using white Rupees Seven Hundred
33 338.01 cement including rounding off junctions and extending them upto 15 cm along 747.29 Sqm FourtySeven Paise TwentyNine
the wall,clearing with water and oxalic acid etc. as directed.(The Product Only
Performance Shall Carry Guarantee for 5 Years Against Any Leakage)
Vitrified Flooring (Type-01) : P & L 24" x 24" vitrified 8 mm thick tile flooring over
mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Rupees One Thousand Three
34 53.58 surface or fixing on existing flooring by adhesive material including dismentaling 1,397.83 Sqm Hundred NinetySeven Paise
of existing flooring and jointed with color cement slurry including finised with EightyThree Only
flush pointing & cleaning the surface etc. complete for antiskit
Vitrified Flooring (Type-01) : Providing and laying Vitrified tiles 8 to 10 mm thick
Rupees One Thousand Five
in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement :
35 236.13 1,538.85 Sqm Hundred ThirtyEight Paise
3-coarse sand) and jointed with white cement slurry
EightyFive Only
Providing and applying Tactile Polyurethane (PU) Flooring system of approved
shade and design over the existing finished surface, including surface
preparation, cleaning, grinding, and removal of dust, oil, or loose particles. The
system shall comprise application of primer coat, base coat, and tactile PU
topcoat with anti-slip finish to form tactile indicators (warning and directional Rupees Two Thousand Seven
36 50.00 tiles) for visually impaired persons, as per approved pattern and sample. Work 2,787.60 Sqm Hundred EightySeven Paise Sixty
includes all necessary surface levelling, repairing of undulations, masking, layout Only
marking, and application using manufacturer’s recommended tools and
techniques to achieve a seamless, uniform, and durable tactile flooring.
Providing and laying Granite slab (16 to 18 mm thick) one side polished flooring
over 20 mm (average) base of cement mortar 1:6 ( 1 cement : 6 coarse sand) or Rupees Two Thousand Three
L.M. 1:1.5 laid and jointed with grey cement slurry including rubbing & polishing Hundred Six Paise SixtyNine Only
complete, for all floors.
Providing and laying 16 to18 mm thick polished Granite stone slab machine cut
in single piece in risers of steps, dedo, pillar, sill and jambs or dedo laid on
mm thick cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) laid over and
jointed withgrey cement slurry incl. rubbing and polishing etc complete. The
Rupees Two Thousand Three
38 175.97 rate includes lodding, unlodding, scaffolding, wastage, making hole, cutting/ 2,391.00 Sqm
Hundred NinetyOne Only
chasing, rounding champhering, edge polishing of edges. The work shall be
carried out as per the approval of architect and engineer-in-charge. for all floors
Vitrified Flooring (Type-02) : Providing and laying Lapato / Glossy/Matt/Rustic
finish Vitrified tiles flooring using minimum 10 mm thick tiles as per approved
make list or selected by Architect , tile size (1200 mm X 600 mm,900
x900,600x600 ) including preparing base for leveling with 20mm thick cement
Rupees One Thousand Nine
mortar 1:6 (1 cement : 6 coarse sand ) and jointed with 3mm thick laticrete
39 387.95 1,920.25 Sqm Hundred Twenty Paise TwentyFive
grouting of approved shade and colour in proper line and level as per detailed
drawing / instruction and approval by architect.The rate shall be inclusive of
protecting the flooring by plaster of Paris and plastic and/or bubble top sheets.
(At all floor area)
Tile (Type-02) : Providing and laying Lapato /Glossy finish vitrified tiles in skirting
using minimum 10 mm thick vitrified tiles of approved make list or as selected by
Architect of premium quality fixed in skirting on 10 mm thick Cement plaster 1:3
(1 cement : 3 coarse sand) and jointed with 3 mm thick-min. 75 mm height Rupees Two Thousand SixtyOne
laticrete grouting of approved shade and colour in proper line and level for Paise TwentySeven Only
average 125 mm height as per detailed drawing /instruction and approval by
architect. ( At all floor area)
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block
60mm thick with grade of concrete M300 pnumatic compressed / vibrated
mechanically and as per approved design Confirming to IS 15658 : 2006 including Rupees Six Hundred EightyThree
35 mm Sand layer for levelling and filling the joint with sand in proper line and Paise EightyEight Only
level as per guidlines of IRC : SP 63-2018 etc. Complete.
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick
base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty
Rupees Nine Hundred
42 11.86 :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with 971.95 Sqm
SeventyOne Paise NinetyFive Only
pigment to match the shade of slab including rubbing and polishing etc.
complete. (A) 25mm thick
Providing and laying polished kota stone slab 25mm thick in risers of
steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1- Cement
Rupees One Thousand FiftySix
43 0.70 : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match 1,056.26 sqm
Paise TwentySix Only
the shade of slab including rubbing and polishing etc. complete.
Kerb Stone : Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of M250 grade
Rupees Three Hundred SixtyOne
44 40.00 concret as per approved design and including excavation for fixing in proper line 361.64 Rmt
Paise SixtyFour Only
and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.
Qty Item of Work In Rupees Unit Amount In Words
Basin Counter/Granite Platform (All Floor : Width - 600 mm ) : Providing and
constructing approved shade and sample of Mirror finish granite platform
600mm width 25 mm thick Machine polished kotah stone as vertical supports at
sides,including cutting granite & kotah as per required shape , dedo 1'6" ht & size Rupees Five Thousand Two
45 5.38 to fit kitchen sink, moulding, tiles adhesive nosing, chamfered front edges, 5,268.09 Sqm Hundred SixtyEight Paise Nine
fixing, disposal of debris etc complete with all labour and materials and as per Only
detailed drawings / architects instruction and approval by Engineer-in-charge.
The sample mock shall be approved from EIC.
Urinal partition : Providing & laying 16 to 18 mm thick both side mirror polished
granite of approved shade and quality, seleted and sorted for uniform color for
urinal partition/ division plate as per design and in required sizes and shapes after
chasing /cutting of dado with cutter machine fixing shall be carried out in white
cement sand mortar (1:1) with matching pigment and/ or necessary adhesive. Rupees Two Thousand Six
46 2.40 (Only finished granite work shall be measured). All expose edges shall be 2,624.36 Sqm Hundred TwentyFour Paise
champhered and polished. The rate includes making hole, cutting/ chasing, ThirtySix Only
rounding champhering, edge polishing of edges. The work shall be carried out as
per the approval of architect and engineer-in-charge.
False ceiling : Providing and fixing eco-friendly light weight calcium silicate false
ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile
Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall
have , light reflection 85% non-combustible as per B.S. 476 part IV, 100%
humidity resistance and also having thermal conductivity0.043° w/m KC.for the
best thermal Insulation . The Light weight calcium Silicate tile shall be of approved
texture Fine fissured/Spintone/Cosmos having NRC value of 0.5 & Globe having
Rupees One Thousand Six
NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true
47 46.87 1,648.96 Sqm Hundred FourtyEight Paise
horizontal level suspended inter locking metal grid of hot dipped galvanized steel
sections (galvanizing @120 grams per sqm including both side) consisting of main
‘T’ runner suitably spaced at joints to get required length and size of 24X38mm
made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross
‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm
along spaced between main ‘T’ at 600mm centre to centre to form agrid of
1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made
of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the
wherever required, Main ‘T’ runners to be suspended from ceiling using G.I.
slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm
long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of
size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom
exposed with 24mm of all T-sections shall be prepainted with polyester baked
paint, for all heights, as per specifications, drawings and as directed by engineer-
in-charge.Note:- Only calcium silicate false ceiling area will be measured from wall
to wall. No deduction shall be made for exposed frames/opening (cut outs) - - -
having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC.
Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for
Globe, light reflection 85% noncombustible as per B.S. 476 part IV, 100%
humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the
best thermal Insulation
Providing and fixing in position collapsible steel shutters with vertical channels
x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom Rupees Five Thousand Eight
48 3.00 rails of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, 5,825.33 Qnt. Hundred TwentyFive Paise
nuts, locking arrangements, stoppers handles including applying a priming coat of ThirtyThree Only
red lead paint.
Flush Door With WPC frame (37 MM) : Providing and fixing in position 35mm
thick solid core wooden flush doors of approved make having fire retardant ply
facing on both sides and finished with 1 mm thick laminate as approved , WPC
Rupees Six Thousand Five
frame size - 125 X 63 MM Well Quality Hardware system of Hinges , Boxer type
49 28.98 6,570.17 Sqm Hundred Seventy Paise Seventeen
door closer , Door handle , Euro profile , lock ,Door stop . work complete
including all type of hardware, fittings , fixtures etc complete as per detailed
drawings and specifications, sample mock shall be approved from EIC.
Flush Door with frame and finish with 1mm thick Laminate (37MM): Providing
and fixing in position 35 mm thick solid core wooden flush doors of approved
make having fire retardant ply facing on both sides and finished with 1mm thick
laminate as approved ,Indian Teak Wood Frame size - 125 X 75 MM, Single rebet , Rupees Four Thousand Seven
50 6.67 Well Quality Hardware system of Hinges , Boxer type door closer , Door handle , 4,749.90 Sqm Hundred FourtyNine Paise Ninety
Euro profile , lock ,Door stop . work complete including all type of hardware, Only
fittings , fixtures etc complete as per detailed drawings and specifications, sample
mock shall be approved from EIC.
Double Leaf Flush Door with frame and finish with 1mm thick Laminate
(37MM): Providing and fixing in position 35 mm thick solid core wooden flush
doors of approved make having fire retardant ply facing on both sides and
finished with 1mm thick laminate as approved ,Indian Teak Wood frame size - Rupees Four Thousand Eight
51 22.05 250 X 75 MM double rebet , Well Quality Hardware system of Hinges , Boxer 4,898.11 Sqm Hundred NinetyEight Paise Eleven
type door closer , Door handle , Euro profile , lock ,Door stop . work complete Only
including all type of hardware, fittings , fixtures etc complete as per detailed
drawings and specifications, sample mock shall be approved from EIC.
Qty Item of Work In Rupees Unit Amount In Words
Window : Providing and fixing factory made upvc fenesta wooden colour sliding
glazed window with Mosquito net and Approved sample by Architect/Client/EIC.
all height dimension comprising of upvc multi chambered frame with in built
roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick
galvanizd mild steel section made from roll forming process of required lenght (
shape & size according to upvc profile ), appropriate dimension of upvc extruded
glazing beads and upvc extruded interlocks, epdm gasket,wool pile,zinc alloy
(white powder coated) touch locks with hook,zinc alloy body with single nylon Rupees Twelve Thousand Four
rollers (weight bearing capacity to be 40 kg),g.i. fasteners 100 x 8 mm size for Paise Ten Only
fixing frame to finished wall and necessary stainless steel screws etc. profile of
frame & sash shall be mitred cut and fusion welded at all corners,including drilling
of holes for fixing hardware's and drainage of water etc. after fixing frame the gap
between frame and adjacent finished wall shall be filled with weather proof
silicon sealant over backer rod of required size and of approved quality,all
complete as per approved drawing & direction of engineer-in-charg. Three track
Three panels sliding window of 5 mm thick toughen glass and series 2000 frame
Providing and fixing S.S. bird net jali (Invisible Grill)- using wire gauge with
average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all
complete With Aluminium equal angle frame or 12 mm mild steel U beading work
at required opening and at any height with all labour & material etc. complete.
Rupees One Thousand Three
53 56.40 and fitting with necessary nuts, bolts, machine screws etc fixing i/c fixing with 1,303.60 Sqm
Hundred Three Paise Sixty Only
necessory accessories and dash / Anchor fasteners of required size. on the top of
floors, concretes, wood, walls, sides of slab with suitable arrangements. etc
complete for all floors and at all levels
Providing and fixing standared extruded of alluminium section of size 63mm x
38.10mm x 1.2mm (Jindal Section:2434, @ Wt. 0.643 Kg/mt) with colour Powder Rupees One Thousand One
54 3.60 Coated alluminium frame for ventilation with 5mm thick frosted glass as details 1,175.56 Sqm Hundred SeventyFive Paise FiftySix
etc complete for Ventilation. All Level Only
Providing and fixing M.S. grills of required pattern to wooden frames of windows
etc. with M.S. flats at required spacings and frame alround, square or round bars Rupees One Hundred One Paise
with round headed bolts and nuts or by screws (A) Plain Grill. Seventeen Only
Applying two coats of putty & two coats of primer of approved brand and
manufacture on new wall surface to give an even shade including thoroughly Rupees Fourty Paise FiftyNine
brushing the surface free from mortar dropping and other foreign matter and Only
sand papered smooth.
Wall painting (two coats) with plastic emulsion paint of approved brand and
manufacture on undecorated wall surface to give an even shade including Rupees SeventyEight Paise Ninety
throughly brushing the surface free from mortar droppings and other foreign Only
matter and sand papered smooth.
Finishing wall with weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the Rupees One Hundred Fourteen
surface to remove all dirt, and remains of loose powdered materials. etc Paise FiftyThree Only
Applying priming coat over new steel and other metel surface after and including
preparing the surface by throughly cleaning, oil, grease, dirt and other foreign
59 2016.39 matter and scoured with brushes fine steel wood, scrapers and sand paper with 35.00 Sqm Rupees ThirtyFive Only
ready mixed priming paint brushing red lead.
Painting two coats (excluding priming coat) on new steel and other metal surface
with enamel Paint, brushing, interior to give an even shade including cleaning the Rupees EightySeven Paise
surface an even shade including cleanicn the surface of all dirt, dust and other EightyOne Only
foreign matter.
Steel work, welded in built up sections framed work including cutting, hoisting,
fixing in position and applying a priming coat of red lead paint. (A)In beams and
Rupees Nine Thousand
61 4.13 joists, channels angles Tees, flats, with connecting plates or angle cleats as in 9,047.86 Qui.
FourtySeven Paise EightySix Only
main and cross beams. Hip and jack rafters, purlins conneted to common rafters
Providing and fixing 'Y' shaped barbed wire fencing on compound wall top with
vertical angle of 50x50x6mmx0.50 mt. height, two cross angle
50x50x6mmx0.45mt. Length, having 3 horizontal and two diagonal rows of
barbed wire (9.38 kg/100 rmt) on vertical angle and three horizontal and two
Rupees Two Hundred
62 125.00 diagonal barbed wire rows on each cross angle incl. cost of barbed wire, 274.14 Rmt
SeventyFour Paise Fourteen Only
necessary GI stapplings, fixing on top of compound wall, painting angle with one
coat of anticorrosive primer and two coats of enamel paint of approved qaulity,
necessary scaffolding etc. complete as per the direction of the Engineer in charge.
Expansion Joint Edge Reparing Treatment : Repairing and profiling of the
existing joints line with help of polymer modified mortar to be fixed in alignment Rupees Four Hundred Six Paise
and straight line as per the joint design width and joint design complete . FiftyThree Only
Providing and fixing of 1.2mm thick EPDM/PVC waterbarrier membrane over the
Rupees One Thousand Eight
joint profile with help of special adhesive and necessary loop throughout the joint
64 9.00 1,835.17 Rmt Hundred ThirtyFive Paise
profile before fixing of the joint system to ensure water tight joints,complete.
Qty Item of Work In Rupees Unit Amount In Words
Horizontal Internal : Floor to Floor & wall to floor FF & WF : The work shall
consist supply and installation of 3R joints and seals -expansion/seismic joint
sysytem model 3R MSDSZJ /3R MSD -QZJ or as approved by client or equivalent
in accordance with the contract drawings and requireements of the specifications
below. The joints are proprietary design utilizing extruded aluminum base
members ,self aligning / centering arrangement and support plates. The material
shall be such that it provides wateright flat joint cover expansion control sysytem
that is capable of accommodating multidirectional seismic movement without Rupees Six Thousand Two
65 4.20 stress to its components.System shall consisit of metal profile that incorporates a 6,272.10 Rmt Hundred SeventyTwo Paise Ten
universal aluminum base member designed to accommodate various project Only
conditions and floor/roof treatments. The cover plate shall be designed of width
and thickness requried to satisfy projects movement and loading requirements
and secured to base members by utilizing manufacturer's pre-engineered self-
centering arrangement that freely rotates / moves in all directions. The self -
centering arrangement shall exhibit circular sphere ends that lock and slide inside
the corresponding aluminum extrusion cavity to allow freedom of movement and
flexure in all directions including vertical displacement . The joint sysytem shall
External - vertical : The work shall consist supply and installation of 3R Joints and
seals - expansion/seismic joint sysytem model 3R MSNGZ/3REM or equivalent
as approved in accordance with the contract drawings and requirements of the
specificatios below. The joints are proprietary design utillizing extruded
elastomeric seals and aluminum base members. The material shall be such that it
provides an Expansion Joints System suitable for Vertical wall to wall flat
application,both new and existing construction in structure & complexes with no
slipping down tendency amongst the components of the Joint Sysytem. the Joint Rupees Four Thousand Eight
66 1.26 sysytem shall utilize lightweight aluminum profiles exhibiting required exposed 4,878.30 Rmt Hundred SeventyEight Paise Thirty
aluminum surface mechanically snap locking to facilitate joint movement Only
throughout the normal movement cycle,the sysytem shall demonstrate the
movement ability to remain flat at all times and provide a flush transition to
maintain the asthetic look between opposing and adjacent finish construction.
Providing and fixing of 3R EM / 3R MSNG system designed for exterior wall
finishes with expansion movement of +/- 25mm design for external
application on wall to wall /wall to corner where exposed metal plate is desired
as per the joint design and design width over the joint profile as per the joint
Internal - vertical : The work shall consist supply and installation of 3R Joints and
seals - expansion/seismic joint sysytem model 3R MSNSK /QSK or equivalent as
approved in accordance with the contract drawings and requirements of the
specificatios below. The joints are proprietary design utillizing extruded
elastomeric seals and aluminum base members. The material shall be such that it
provides an Expansion Joints System suitable for Vertical wall to wall flat
application,both new and existing construction in structure & complexes with no
slipping down tendency amongst the components of the Joint Sysytem. the Joint
Rupees Five Thousand One
67 0.60 sysytem shall utilize lightweight aluminum profiles exhibiting required exposed 5,110.60 Rmt
Hundred Ten Paise Sixty Only
aluminum surface mechanically snap locking to facilitate joint movement
throughout the normal movement cycle,the sysytem shall demonstrate the
movement ability to remain flat at all times and provide a flush transition to
maintain the asthetic look between opposing and adjacent finish construction.
Providing and fixing of 3R MSNSK/ 3R IL2 system designed for interior wall
finishes with expansion movement of design for internal application on wall
to wall /wall to corner where concealed /flush metal plate is desired as per the
joint design and design width over the joint profile as per the joint
Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for
following diameters for services wherever pipes pass through walls/ slabs/ beam
in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per
drawing, kept in the position while concreting, and burrs removed before laying.
Rupees NinetyOne Paise Seventy
68 10.00 Open ends of the pipe shall be closed as the pipe is installed to avoid clogging 91.70 Rmt
while concreting. Rate shall be inclusive of removal of sleeves before water
proofing or grouting. For all floors / all levels / all heights. (a) 50mm Diameter
Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for
following diameters for services wherever pipes pass through walls/ slabs/ beam
in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per
drawing, kept in the position while concreting, and burrs removed before laying.
Rupees One Hundred SixtyTwo
69 10.00 Open ends of the pipe shall be closed as the pipe is installed to avoid clogging 162.53 Rmt
Paise FiftyThree Only
while concreting. Rate shall be inclusive of removal of sleeves before water
proofing or grouting. For all floors / all levels / all heights. (a) 75mm Diameter
Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for
following diameters for services wherever pipes pass through walls/ slabs/ beam
in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per
drawing, kept in the position while concreting, and burrs removed before laying.
Rupees Three Hundred Eight
70 10.00 Open ends of the pipe shall be closed as the pipe is installed to avoid clogging 308.70 Rmt
Paise Seventy Only
while concreting. Rate shall be inclusive of removal of sleeves before water
proofing or grouting. For all floors / all levels / all heights. (a) 110mm Diameter
Qty Item of Work In Rupees Unit Amount In Words
Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for
following diameters for services wherever pipes pass through walls/ slabs/ beam
in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per
drawing, kept in the position while concreting, and burrs removed before laying.
Rupees Eight Hundred FiftyFour
71 10.00 Open ends of the pipe shall be closed as the pipe is installed to avoid clogging 854.86 Rmt
Paise EightySix Only
while concreting. Rate shall be inclusive of removal of sleeves before water
proofing or grouting. For all floors / all levels / all heights. (a) 160mm Diameter
Core cutting : Providing and wet drilling accurate and clean holes of specified
diameter in RCC walls, slabs, beam or any other RCC member without vibration
by core cutting (diamond drilling) machine including scafolding, safety majors,
disposing the debris, cleaning for all levels/ all height as per structural
Rupees One Thousand One
consultant's drawing, after approval of engineer in charge etc compete. Rate shall
72 18.00 1,126.66 Nos Hundred TwentySix Paise SixtySix
be inclusive of filling the hole with non shrink grout/Chemical Anchoring in good
manner. Measurement shall be taken for the depth of holes in running meter for
specified diameter. Holes shall made by authorised approved agency. (a) holes
Core cutting : Providing and wet drilling accurate and clean holes of specified
diameter in RCC walls, slabs, beam or any other RCC member without vibration
by core cutting (diamond drilling) machine including scafolding, safety majors,
disposing the debris, cleaning for all levels/ all height as per structural
Rupees One Thousand Four
consultant's drawing, after approval of engineer in charge etc compete. Rate shall
73 18.00 1,463.49 Nos Hundred SixtyThree Paise
be inclusive of filling the hole with non shrink grout//Chemical Anchoring in good
FourtyNine Only
manner. Measurement shall be taken for the depth of holes in running meter for
specified diameter. Holes shall made by authorised approved agency. (b) holes
Providing and fixing anchor fastener system chemical based of Hilti or equivalent
make for connections in concrete as per design and drawings and/or as directed
by engineer in charge. (Rate shall include cost of bolts, labour, all material
including chemical cartridge (wherever required). T & P for power drilling,
cleaning the drilled holes of loose dust by blowing air, insertion of chemical from
cartridge with plastic nozzles as may be required, placing internally threaded Rupees One Hundred
sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, NinetySeven Paise FourtySix Only
fastening screw and tightening with nuts and check nuts etc may be
required.Work complete including all type of tools , tackles, scaffolding etc
complete at any level and height. work complete as per the instruction of
EIC/Client/Architect. 12 mm dia.
Providing and fixing anchor fastener system chemical based of Hilti or equivalent
make for connections in concrete as per design and drawings and/or as directed
by engineer in charge. (Rate shall include cost of bolts, labour, all material
including chemical cartridge (wherever required). T & P for power drilling,
cleaning the drilled holes of loose dust by blowing air, insertion of chemical from
cartridge with plastic nozzles as may be required, placing internally threaded Rupees Four Hundred FourtyOne
sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, Paise ThirtySeven Only
fastening screw and tightening with nuts and check nuts etc may be
required.Work complete including all type of tools , tackles, scaffolding etc
complete at any level and height. work complete as per the instruction of
EIC/Client/Architect. 16 mm dia.
Providing and fixing anchor fastener system chemical based of Hilti or equivalent
make for connections in concrete as per design and drawings and/or as directed
by engineer in charge. (Rate shall include cost of bolts, labour, all material
including chemical cartridge (wherever required). T & P for power drilling,
cleaning the drilled holes of loose dust by blowing air, insertion of chemical from
cartridge with plastic nozzles as may be required, placing internally threaded Rupees Eight Hundred Thirty
sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, Paise FourtySeven Only
fastening screw and tightening with nuts and check nuts etc may be
required.Work complete including all type of tools , tackles, scaffolding etc
complete at any level and height. work complete as per the instruction of
EIC/Client/Architect. 20mm dia.
SS RAILING : Providing & Fixing Stainless steel 304 grade pipe railing Horizontal
50 mm dia. 2 Nos. and Supprt pipe from wall 16mm Dia. at everymax 0.90mtr C/C
including welding, grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel nuts, Plates and bolts Rupees Two Thousand Eight
77 20.00 complete, i/c fixing the railing with necessary accessories & stainless steel dash 2,872.66 Rmt Hundred SeventyTwo Paise
fasteners, stainless steel bolts etc., fixed on Concrete or brick work . Rate SixtySix Only
including of all materials.labour, fixing & polishing etc. comp. as per Drawing and
Approve by Engineer In Charge
Qty Item of Work In Rupees Unit Amount In Words
SS RAILING : Providing and fixing stainless steel (Grade 304) railing Horizontal top
pipe of 50mm dia., verticle Sq pipe 32X32 mm 900 mm c/c and 16 mm Dia.
Nos. Horizontal Pipe equval Spacing Hollow Pipes, channels, plates etc., including
welding, grinding, buffing, polishing and making curvature (wherever required)
and fitting the same with necessary stainless steel nuts, Plates and bolts
complete, i/c fixing the railing with necessary accessories & stainless steel dash Rupees Three Thousand Seven
78 59.50 fasteners, stainless steel bolts etc., of required size, on the top of the floor or the 3,764.88 Rmt Hundred SixtyFour Paise
side of waist slab with suitable arrangement as per approval of Engineer-in EightyEight Only
charge, (for payment purpose only weight of stainless steel members shall be
considered including fixing accessories such as nuts, bolts, fasteners etc.). as per
Drawing and Approve by Engineer In Charge
Roller blind : Providing and fixing of approved quality roller blinds using phifer or
equivalent fabric of premium grade, with roller tube, bottom bar leveller made
of extruded aluminium alloy an Idler, Insert Type- Brackets, PVC chain etc. all
complete at all floor and heights as per approved specification. Roller Tube
Control, Clutch, Idler Side by side or single Roller Tube of extruded Aluminium
38mm inner dia - 41mm outer dia minimum wall thickness of 1.6mm. Roller blind -
roller blind fabric should be made up of 35% FibreGlass, 65% PVC, it should have
Rupees One Thousand Seven
specific low emissivity treatment and lead free with Greenguard gold
79 60.00 1,724.69 Sqm Hundred TwentyFour Paise
certification. It should have 3% to 5% openness, fabric thickness should be
mm, mesh weight approx 400 gms/ sqmtr. It should cut UV rays, with
antimicrobial properties preferably with Microban. The fabirc should be Flame
retardant and Lead Free. It should be GreenGuard certified with Gold Standard
for low chemical emissions for indoor use. including all accessories, material,
labour,installation etc..and complete the work satisfactorily as per instruction of
architect or Engineer-in charge
Ply palmet work : Providing and fixing wooden pelmets of upto 150mm/950 mm
x 150 to 600 mm L shape made of 19mm thick ply as per IS 710 MR Grade and
beading of 1.0 mm thick Laminate for curtains/ blinds/ projection screen of
openings. Rate to be inclusive of lipping, cutting, wastages, necessary fixtures, Rupees One Thousand Seven
80 9.57 nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per 1,778.38 Rmt Hundred SeventyEight Paise
drawing and approved sample etc finish with veneer semi gloss PU finsh. (Mode ThirtyEight Only
of Measurements: Only the palmet length shall be measured & paid for the items
in which palmet work is not inclusive in item description)
Soft Board : Providing and fixing on wall 12mm thick approved quality soft board
with cotton cloth/fabric of approved make and shade on 12mm thick IS 710 MR
Grade ply with 19mm x 25 mm thick Ghana teak wood beading all around
including semi glossy PU polish, as approved sample and as directed by Architect.
Rupees Two Thousand Seven
81 6.00 The work shall be measured & paid in Sqm. for all floors, all level and at all 2,710.01 Sqm
Hundred Ten Paise One Only
heights including all costs, The rate shall be inclusive of lacquer polish to all the
exposed wooden members. Only the clear elevation area of the cloth/fabric shall
be measured and paid.
GRC WORK : Providing & fixing architectural moldings profiles and other
decorative elements made out of GRC (Glass Fibre reinforced Cement) in required
shape, size & thickness all as per manufacturers specifications, such as all
decorative articles should be made by using high power spray machine, using AR
Glass fiber with minimum ZrO2 16% including necessary scaffoldings for all
heights, as per approved drawings and reference images. GRC elements thickness
shall be 12-15 mm. fixing edges will be 4O TO 50 MM GRC Elements shall be fixed
Rupees Five Thousand Six
on RCC Structure/Brick Work/ Primary Steel Structure (MS with protective coat of
82 10.50 5,609.85 Sqm Hundred Nine Paise EightyFive
Red oxide/Zinc Primer Shall be Used). Hilti make GI Screw Fastners or equvalent,
GI Thread Rods and MS cleats shall be used for fixing of GRC elements on RCC/MS
Primary fabricated structure. Joints shall be filled with PU sealants/ base material
of GRC as and where required. The quote rate shall be inclusive of all design, &
shop drawing and sample mock of all elements approval from Architect &
consultant.Rate shall be inclusive of all required fabrication work for fixing only
primary strcure shall be provided as base structre only as per requirement. Mode
and method of measurement shall be in accordance with IS: 1200.a ) GRC JALI-As
Convex Mirror is a curved mirror : Providing and supplying Convex Mirror as per
references image, detail and approved sample by Architect/EIC. The Convex
Safety Mirror is structured with a polycarbonated front and acrylic back which
makes it lighter and easy to place on any exterior. It also looks like a bubble
mirror that has a curvature of the 130-degree view. The Convex Mirror comes
with a protective film coating that makes the traffic mirror scratch-resistant,
break-resistant, and tear-proof.The Polycarbonate Lens reflects a crystal clear and
bright image of the view which can be seen from a long distance. It also magnifies Rupees Two Thousand Nine
83 2.00 the opposite fronts that help the drivers to locate small things clearly. The 2,903.75 Each Hundred Three Paise SeventyFive
contractor shall Convex Mirror with Installation Kit, Nuts & Bolts Included Only
support, Location, any Height and all complet installation work as per site
condition. This Item includes cost of all labour, transfort etc. as required for
completing the work in all respects. All works are carried as per approval and
instructions of the architect. Rate shall inclusive of sample, all materials, loading,
unloading, all taxes, transportation, placing at all floors and for all leads,all
accessories as described in item description.
Direct Bought Out Item : Providing and placing in position SS brush finish (12 LTS
Rupees One Thousand One
PEDAL BIN/ STEP BIN -) of Kich , Dorma ,etc Square Pedal bin 10x15 Stainless
84 2.00 1,184.73 Nos Hundred EightyFour Paise
Steel Dustbin or Equivalent as per images and as selected by the Architect.
SeventyThree Only
Qty Item of Work In Rupees Unit Amount In Words
Providing and supplying of Dustbin of Approved Brand Sintex or equivalent of 40- Rupees One Thousand Eight
85 2.00 50 Liters capacity. 1,811.94 Nos Hundred Eleven Paise NinetyFour
Providing and fixing in position Duel (2 No) of Dustbin for wet and dry garbage, of
suggested size, material (corrosion resistance), finish (PU painted/ polyster
powder coated), with logo of client and type/ function of dustbin and as per
duel Rupees Eleven Thousand Nine
sample approved by Architect. The rate shall be for duel dustbin or two seperate
86 3.00 11,963.45 (2 No) Hundred SixtyThree Paise
dustbin (min 40 Lit each capacity) as per selection. Rate shall be inclusive of fixing
dustbi FourtyFive Only
of dustbin with all required civil work, anchor fastners of approved make and
required capacity and making good.
Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden frame of Rupees Two Thousand Four
87 10.00 size 2in x 1in consisting 6mm thick ply in back with digital vinyl printing and 5mm 2,497.23 Nos Hundred NinetySeven Paise
thick glass on top if required. TwentyThree Only
Natural Plant : Providing and planting of natural plants, healthy, well-grown, and
free from diseases, of approved species and variety, by Architect.Item includes
cost of all labour, transfort etc. including supply, transportation, handling,
Rupees Four Thousand SixtyFive
88 40.00 excavation of pits, planting with good quality garden soil and manure, watering, 4,065.25 Nos
Paise TwentyFive Only
staking, and minimum plant height 10' with pvc pot , complete as directed by the
Engineer-in-Charge.
Providing and fixing Sainless steel signage plate of 1.5mm thick with laser print/
etching and filled with duco paint of approved make including fixing to the wall or
Rupees Six Thousand Eight
89 0.55 door with required acessories and as specified type including fixing etc complete 6,856.08 Sqm
Hundred FiftySix Paise Eight Only
as directed by engineer in charge
DOOR MAT : 3M Nomad - Wiping technology - Heavy Duty 7150 - or eqvivalant
approved make Grey Colour: Open Contruction Loop Matting with Crush Resilient
Rupees One Thousand Two
Vinyl with backing. Matting Should be durabe shouldn't Flatten ove time.
90 14.40 1,261.39 Sqm Hundred SixtyOne Paise
Thickness Should be 13mm Min.Suitable for heavy traffic areas, where traffic is
ThirtyNine Only
upto 4 lakh people per year. work complete as per approved sample.
Providing & placing in position DIGITAL CLOCK - WALL MOUNTED as per architect Rupees Two Thousand
selection Ajanta Digital Wall Clock(Brown, Black, With Glass) SeventyNine Paise Nine Only
Signages : Providing and fixing of the following signages using make of cosign or
equivalent approved make by architect.All the detailed work out as per the
detailed drawing and instruction of EIC., specifications and drawings as indicated
there in to all heights and elevation including necessary scaffoldings / supports
/permanant fixing with cement mortor if fixed to ground etc complete in all
Rupees One Thousand Eight
respects.The Signage cost should be inclusive of panels,hanging
92 11.00 1,888.60 Nos Hundred EightyEight Paise Sixty
system,bridges,primary & secondary fixings,vinyl,painting,powder coating self
glowing mateial as directed etc.All shop drawings and coordination with other
services is in scopeof contractor.( At all floor) Size (150 x 600mm) - FACE /WALL
MOUNTED NAME PLATES/SIGNAGES/INFORMATION SIGNAGES (with back lit)
Inauguration Plate : Providing & fixing inauguration plate (Takhti) made from
+18 mm thick Granite with embossed/engraved text letters made from SS
grade of various sizes 1. The fonts and letters shall be as per the reference
drawing made from SS 304 with national Emblem Logo The work shall be done as
per the approved shop drawing (to be prepared by contractor), specifications,
sample approved and as directed by the Architect and Engineer-in-charge. The Rupees Six Thousand Six Hundred
rate shall be for complete item inclusive of all material, labour, wastages, SixtySeven Paise TwentyFive Only
necessary tools & tackles,approved make for all floors, all heights, all levels and
all places within campus. Contractor shall do all the needful and shall fulfill
Architect's design intent. No additional claims will be entertained for this.
Providing and Fixing the S.S. 304 Letters with back light of given size as per
Architect's drawings and approved sample or make (Approx Height of each letter
18 to 24 inches) along with all necessary hardwares, scaffolding, Alu/MS Back
support, hanging support and accessories, The rate shall be for complete item
Rupees TwentyTwo Thousand Six
inclusive of all material, labour, wastages, necessary tools & tackles, for all floors,
94 26.00 22,649.25 Each Hundred FourtyNine Paise
all heights, all levels and all places within campus. Contractor shall do all the
TwentyFive Only
needful and shall fulfill Architect's design intent. No additional claims will be
entertained for this. (Consider Letter : TALUKA LIBRARY AT DHRANGADHRA)
Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with Rupees One Lakh FiftySix
95 1.00 proportionately base dimenstion as per approved design by client and complete 1,56,802.50 Each Thousand Eight Hundred Two
as per instruction of engineer-in charge and consultant. Paise Fifty Only
PLUMBING FIXTURE : Providing, fixing, jointing and testing in position of various
Rupees One Thousand Four
Bathroom C.P. Fixtures with hydraulic testing complete as per design, drawing
96 11.00 1,451.88 Nos Hundred FiftyOne Paise
and instruction of site incharge. 25mm Dia Control Valve
EightyEight Only
Providing and fixing screw down bib taps of following size. (B) Brass chromium Rupees Two Thousand Paise Ten
plated screws down Bib Tap. (i) 15mm dia. Only
Providing and fixing health faucet with 1 m PVC tube and swivel hook including all Rupees One Thousand Five
98 6.00 fittings complete. 1,585.45 Nos Hundred EightyFive Paise
FourtyFive Only
Providing, fixing, jointing and testing in position of various Bathroom C.P. Fixtures Rupees Two Thousand Two
99 7.00 (Angle Cock) with hydraulic testing complete as per design, drawing and 2,268.41 Nos Hundred SixtyEight Paise
instruction of site incharge. Urinal stop cock. FourtyOne Only
Qty Item of Work In Rupees Unit Amount In Words
Providing and fixing white glazed vitreous china wall mounting type (European
type) water closet with C.P. bolts, nuts, C.I. Chair or other hanging arrangement,
white solid plastic seat with lid, C.P. brass hinges and rubber buffers, Metropole
Rupees Seventeen Thousand Nine
flush valve reguler 40mm size (concealed body) with exposed shut off provision
100 6.00 17,968.41 Nos Hundred SixtyEight Paise
C.P. brass screws and washers complete, including cutting and making good the
walls floors where required. Wall hung EWC matching white plastic seat with lid
& CP brass hinges & CP push plate .
Providing and fixing White glazed vitreous Wash Basin Round Over-Counter, size
450 mm dia., with supporting in stone flooring, 1 no, 32 mm CP Bottle trap with Rupees Five Thousand Eight
101 7.00 extension piece to wall flange with rubber adopter for waste connection,1.2m 5,819.81 Nos Hundred Nineteen Paise
Flexible Pipe [1No] and waste coupling. Etc complete. Wash Basin Table Top - EightyOne Only
Providing & fixing in position 15 mm C.P. brass angle cock of best quality with
Rupees Two Thousand Paise Ten
102 11.00 Rmt Long pvc Tube and accessories with necessary fittings etc. complete. 2,000.10 Nos
Providing & fixing in position 15 mm C.P. brass pillar cock of best quality with Rupees One Thousand Seven
103 7.00 necessary fittings etc. complete. 1,751.75 Nos Hundred FiftyOne Paise
SeventyFive Only
Providing and fixing TOWEL RING SQUARE , as approved by the architect. Work
Rupees Nine Hundred
104 7.00 complete including all type of fittings, etc complete as per suggestion of 974.01 Nos
SeventyFour Paise One Only
Providing and fixing SOAP DISH HOLDER as approved by the architect. Work Rupees One Thousand Three
105 7.00 complete including all type of fittings , etc complete as per suggestion of 1,344.74 Nos Hundred FourtyFour Paise
Architect/EIC. SeventyFour Only
Supply, Installation, Testing & Commissioning vitreous matrix set (For Handicap)
including matrix EWC (European type water closet) with cistern, wall hung matrix
wash basin, lever arm faucet for ease of operation, centre pre-punched tap hole, Rupees FiftyThree Thousand Nine
106 1.00 grab bar with slightly lower height for added convenience & fixed to wall with 53,924.73 Nos Hundred TwentyFour Paise
brackets including cutting and making good the wall and floors as required. SeventyThree Only
Colour Star White.
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter
with jali of the following nominal diameter of self cleansing design with C.I scread Rupees Five Hundred FiftyEight
down or hinged grating including the cost of cutting and making good the walls. Paise ThirtySix Only
Providing and fixing Urinal of approved quality including connection with trap and Rupees One Thousand Five
108 4.00 with integral longitudinal flush pipe. (A) Squating plate pattern white 1,554.17 Each Hundred FiftyFour Paise
earthenware 550mm x 300mm. Seventeen Only
Providing and fixing Kitchen sink with C.I. Or M.S. brackets, painted white
Rupees Two Thousand Two
including cutting holes in walls and making good the same but excluding fittings.
109 4.00 2,280.27 Nos Hundred Eighty Paise
(C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size
TwentySeven Only
Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass Rupees Eight Hundred
110 7.00 mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge 833.73 Each ThirtyThree Paise SeventyThree
with C.P. brass screws and washers. Only
Providing erecting and fixing double coated ISI water tank of required capacity
Rupees Three Paise NinetyFive
111 10000.00 each with all necessary fittings and connection etc. complete on terrace 3.95 Lit
SUB EST-01 (Civil Interior, Plumbing Fixure)
Reading Table / Work Station : Providing & fixing work station / table having ht
of 750 mm Top, with MS Pipe Structure of Frame as per Architect/ Engineer
Design or Selection and Back and side Ply of table is also made up of 19mm Thick.
Top of Table is 19mm thk ply with laminate Finish Per Requirement and All
internal & external Joints finished with teakwood beading Patti. Common or front
Part of Table is Sectationized with MS Perforated Sheet. All exposed and internal
Rupees TwentyFour Thousand
112 66.96 surfaces covered with Laminate Finish of approved shade & Complete as per 24,910.00 Sqm
Nine Hundred Ten Only
detail drawings & as instructed by Architect/consultant/ Engineer In charge.
Complete with all necessary hardware like nails, ss screws, table chain, Key board
trey, TDS channel, adhesives etc. Contractor has to provide all necessary cut outs
for Electrical works & no extra payment shall be made for it. All ply should follow
Supplying and providing reading chairs with PP arms with soft PU pads, Seat and
back upholstered with PU cushioned and MS powder coated frame and cantilever
Rupees Four Thousand Eight
legs. Overall dimension 590 L x 600 W x 915 H (Or as specified) complete as
113 124.00 4,878.30 Nos Hundred SeventyEight Paise Thirty
directed by architect and product as per given specification. Complete as per
architectural design and concept and approved by Architect & Client.
Gang Chair (3 Seater) : Providing and Fixing 3 Seater (moulded foam seat and
back In PU upholstery ) Pero Cross Beam made of powder coated regular MS ERW
tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/- 0.014 cm size. Legs to be
chrom plated made of rolled steel with 0.12 +/- 0.013 cm thinkness.Seat and Back
Rupees Eighteen Thousand Three
114 4.00 Shell to be peforated made from cold rolled M.S. Sheet (DIN 1623 Part 1 ST -12 18,003.25 Nos
Paise TwentyFive Only
Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made of chrome Plate solid
steel 3.0 cm +/- 0.03cm x 1.2 cm +/- 0.03 cm with fluting and plastic inserts. The
Shell to be assembled on the cross beam with help of M8 Bolts.
Qty Item of Work In Rupees Unit Amount In Words
Supplying and Placing Folding Wheel Chair with Overall dimension: (L) 790 x (W)
600 x (H)870mm Frame structure Foldable frame structure is made of section
22x1.2mm A3 carbon steel with chrome finish. Cross bar are made of A3 carbon
steel with section 25.4 x 1.2mm. Rear wheel 24 inch Solid mag wheels with alloy
in the rim Hand rim Integrated hand rim provide to drive the wheel chair of
section 16x1.2mm A3 carbon steel with chrome finish Front wheel 8 inch HUB
made of PA polymer and outer with solid rubber Arm rest PU molded arm rest &
base is made of ABS for better arm support Calf rest & seat Leatherette strap for
Rupees TwentyThree Thousand
115 2.00 calf rest & leatherette cushion for seat Footrest Adjustable alluminimum die cast 23,230.00 Nos
Two Hundred Thirty Only
foot rest with updown & swivel type mechanism Push handle Handles are made
of moulded rubber grip to push the wheelchair Brakes Hand brakes are provided
to lock the wheelchair at desired location. Foot press Extended base with molded
plastic for better grip Finish Anti rust chrome finish safe working load
100kg.etc.complete as per drawings and design supplied by architect and
instruction given by authority and E.I.C.
SUB EST- 02 (Furniure Work)
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length , in below type of pipe erected with 6A
Modular type switch / bell push & accessories and earth continuity of following
type, erected on PVC / Metallic/Wooden box, single mounting base frame
Rupees Four Hundred EightyFive
116 64.00 covered with textured/metallic/white front plate modules erected on / in wall / 485.81 Pt.
Paise EightyOne Only
ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete Cat-III
Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of
sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires, in below type of pipe to be erected complete with earth
continuity and necessary connection with primary light with accessories erected
on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Rupees One Hundred SixtySeven
Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling Paise SixtySix Only
rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete Cat-III
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire
of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires erected in below type of pipe with 6A Modular type
switches and following type of accessories erected on PVC / Metallic/Wooden
box, single mounting base frame covered with textured / metallic/white front Rupees Six Hundred Three Paise
plate modules erected on / in wall / ceiling as per pipe erected. with necessary NinetyEight Only
batten/angle holder or ceiling rose or H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both
are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up
to 10 mtr length, in below type of pipe erected with 6A Modular type switch and
hum free EME step type electronic fan regulator mounted and accessories with
earth continuity of following type erected on PVC / Metallic/Wooden box, single
Rupees Six Hundred SeventyFour
119 22.00 mounting base frame covered with textured/metallic/white front plate modules 674.68 Pt.
Paise SixtyEight Only
erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete Cat-III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are
of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected complete with Modular type switch &
pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front
plate modules erected on / in wall / ceiling as per pipe erected with following
Rupees Five Hundred Ten Paise
120 139.00 type of accessories. 510.05 Pt.
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby
switchboard/mcb db board
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete Cat-III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are
of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected complete with Modular type switch &
pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front
plate modules erected on / in wall / ceiling as per pipe erected with following
Rupees Seven Hundred
121 7.00 type of accessories 745.38 Pt.
FourtyFive Paise ThirtyEight Only
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete Cat-III
Qty Item of Work In Rupees Unit Amount In Words
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin
socket erected on PVC / Metallic/Wooden box, single mounting base frame
Rupees Two Hundred FiftySeven
122 14.00 covered with textured / metallic/white front plate modules erected on / in wall 257.55 Pt.
Paise FiftyFive Only
/ ceiling with following type accessories. Cat-III
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured /
Rupees TwentyFive Paise
123 20.00 metallic/white front plate , modules erected with necessary connections as per 25.25 Ea.
TwentyFive Only
site situation directed by Engineer In charge. (7) Blank Plate
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings
& Junction boxes fixed with adhesive solution & Clamps with following dia of Rupees ThirtyThree Paise
pipes, in approved manner as directed. ThirtyThree Only
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected
concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC
Rupees SixtyTwo Paise SixtyTwo
125 561.00 insulated stranded wire of green colour for earth continuity of following size 62.62 Mtr.
(A) with medium class Rigid PVC pipe and accessories
(a) 2 wire 1.5 sq. mm
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected
concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC
Rupees EightyTwo Paise
126 616.00 insulated stranded wire of green colour for earth continuity of following size 82.82 Mtr.
(A) With medium class Rigid PVC pipe and accessories
(b) 2 wire 2.5 sq. mm
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected in / on
wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire
Rupees One Hundred Twelve
127 105.00 of green colour for earth continuity of following size 112.11 Mtr.
Paise Eleven Only
(A) with medium class Rigid PVC pipe and accessories (a)
Providing and erecting decorative wall bracket fittings complete with LED lamp
and rust free fittings components mounted in chrome finish housing with holder Rupees One Thousand Seven
128 8.00 ,clear/opaque glass diffuser complete erected with lead wires with minimum 15 1,712.96 Ea. Hundred Twelve Paise NinetySix
wattage capacity as per instruction engineer incharge/architect/authority .cat-III Only
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die
cast powder coated and high U.V. & corrosion resistance with diffuser housed in
aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Rupees Four Hundred
Luminaire efficacy> 85 lumens/watt
129 10.00 427.23 Ea. TwentySeven Paise TwentyThree
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision
for spring loaded mounting clips complete.IP20
(ii) 11-15 watts, Surge-2 KV KV cat-III
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die
cast powder coated and high U.V. & corrosion resistance with diffuser housed in
aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt , Rupees Five Hundred EightyNine
LED driver efficiency > 85 % Paise EightyFour Only
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision
for spring loaded mounting clips complete.IP20
(iii) 16-20 watts, Surge-2 KV cat-III
Qty Item of Work In Rupees Unit Amount In Words
Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star
rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite
magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.
canopies, shackle kit with earthing provision, copper winding, Power factor not <
0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,
RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Rupees Two Thousand Eight
131 22.00 Speed Control and all remaining accessories including safety pin, nut bolts, 2,885.57 Ea. Hundred EightyFive Paise
washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage FiftySeven Only
and rectifier circuit with surge, over current and overload protection , 50 Hz,
Single phase AC Supply, earthing etc. Complete as required.[ Make shall be
approved by Engineer in Charge]
(B) 1200 mm Sweep (48")
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down
Rupees One Hundred Eight Paise
132 7.00 rod erected duly painted for fan complete with proper insulation without leakage 108.07 Mtr.
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the
RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box Rupees One Hundred Eight Paise
/ Heavy Duty PVC box complete erected concealed in Ceiling with necessary Seven Only
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Eighteen Paise Eighteen
Supplying & erecting approved make low noise decorative exhaust fan having Rupees One Thousand Seven
135 8.00 square frame ABS body with inbuilt lowers & square frame.For 200mm with 1350 1,703.87 Ea. Hundred Three Paise EightySeven
RPM cat-ii Only
Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up
to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. Rupees Six Thousand One
136 9.00 supply 50 c/s. with all internal connections, spreader tinned copper & complete 6,173.12 Ea. Hundred SeventyThree Paise
erected in existing 16 G.M.S. housing. Twelve Only
ICS=100% of ICU only Cat III
Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 35 KA. at 415 V. having normal current rating
Rupees Eight Thousand FiftyFive
137 2.00 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 8,055.76 Ea.
Paise SeventySix Only
c/s. with all internal connections, spreader tinned copper & complete erected in
existing 16 G.M.S. housing.
Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating
Rupees Sixteen Thousand Two
200A.with variable Thermal & magnetic release suitable to work on A.C.supply
138 1.00 16,221.61 Ea. Hundred TwentyOne Paise
c/s. with all internal connections, spreader tinned copper & complete erected in
existing 16 G.M.S.housing. ICS=100% of ICU only Cat III
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting
Aluminium Busbars with four equal Nos. of bus having current density not more
than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with
Rupees One Thousand
colour insulating tape for phase sequence of following current carrying capacity, Rn.Mt
139 8.00 1,037.27 ThirtySeven Paise TwentySeven
erected with necessary bus bar supports /insulators, main cable socket to each r
busbar,erected in existing cubical panel with necessary connections.
(B) Suitable for 200 Amp. capacity
Providing and erecting Approved make Earth fault Relay suitable to mount with
inter connection suitable to following size of moulded case circuit breaker having
Rupees Four Thousand Nine
CT ratio & MCCB rating as following along with shunt trip 220V AC. with all
140 1.00 4,983.34 Ea. Hundred EightyThree Paise
internal connections & complete erected in existing M.S.housing.
ThirtyFour Only
providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to
operate on 240 V A.C. system and having breaking capacity 10 KA to be erected Rupees One Hundred Twelve
in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Paise Eleven Only
Providing & erecting 240 V MCB double pole switch for motor & inductive load
(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box Rupees Two Hundred NinetyNine
having following capacity (A) 6 to 32 Paise NinetySeven Only
Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve)
having 10 KA Breaking capacity and confirms to IS : 8828 in existing metal box Rupees Seven Hundred
having following capacity. (C) 63 ThirtySeven Paise Thirty Only
Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve)
having 10KA breaking capacity & confirms to IS :8828 in existing box having Rupees Six Hundred FourtySeven
following capacity (b)40 Paise FourtyOne Only
Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve)
having 10KA breaking capacity & confirms to IS :8828 in existing box having Rupees Seven Hundred Sixteen
following capacity (c)63 Amp. Paise Nine Only
providing and erecting Approved make RCCBs conforming to IS: 12640 and having
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for
operation on single phase 240 V,50Hz. having characteristic of quick action &
Rupees Two Thousand Two
tripping with all advance feature & do not incorporate any electronic component.
146 7.00 2,235.13 Ea. Hundred ThirtyFive Paise Thirteen
for following Max. rating erected as directed
(ii) 40Amps. DP Cat. III
Qty Item of Work In Rupees Unit Amount In Words
Providing and erecting Sheet Steel powder coated MCB distribution board - flush
/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate
nos. of MCBs.(The DBs should be used of same company of MCB to be used) Rupees Three Thousand Eight
147 2.00 suitable for 3,874.36 Ea. Hundred SeventyFour Paise
(B) three phase incoming and single phase horizontal type outgoing Per phase ThirtySix Only
isolation type (PPI)
(b) sheet steel double door
Supplying & erecting in earthpit of minimum bore dia. 225mm size approved
make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of
mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250
Micron galvanising, connection terminal dia of 14 mm with constant ohmic
value surrounded by highly conductive compound with high charge dissipation
suitable for following type of applications with chamber and heavy duty cover
(A)(approved make OEM has to submit test certificate including value of earth
148 resistance of installation duly stamped and signed by agency and officer Incharge - -
has to ensure the value of earthing resistane mentioned in test Certificate) &
having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-
0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load
& dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound
should be capable to retain moisture for long time Necessary test report must be
submitted by Agency.
(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester
Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e Rupees Ten Thousand Five
4.00 independent Earthing in normal soil. 10,593.89 Ea. Hundred NinetyThree Paise
Length of Pipe : 3.00 mtrs EightyNine Only
Back filling Compound :2 nos Bags of 25 Kg.
Providing & erecting weather proof, dust & vermin proof, floor mounted front
operated indoor type cubical panel board necessary IP-42 and above protection
as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet
for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with
necessary accesories , supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal partitions & cable alley as per
requirements & instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper
wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB
for measuring instruments, earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles with locking arrangement
and rubber gasket,heavy duty end terminal connection,danger notice
board,necessary ventilation,earthing strip complete. The Panel shall be painted
with epoxy powder coating.
(B) The standard companies switch gear shall be used and only manufacturers at
CPRI approved factory
(i) with 350mm depth
Rupees Fourteen Thousand Nine
Hundred Two Paise FiftyFive Only
Providing and erecting ,Fabricating the box type items made from M.S. Sheet
with A.I. supports, wings, doors, handles other hardware materials as per
Rupees One Hundred Eighty Paise
150 40.00 requirement design with finishing by three tank powder coating processed inside 180.79 Kg.
SeventyNine Only
and outside painted, erected as directed including minor civil work.
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in
Rupees Two Hundred Twenty
151 88.00 existing trench / pipe of following size of cables (B) 3 1/2 220.18 Mtr.
Paise Eighteen Only
core 35 Sq. mm ( 16 Sq. mm 1/2 core)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Rupees Three Hundred
152 83.00 existing trench / pipe of following size of cables (D) 3 1/2 378.75 Mtr. SeventyEight Paise SeventyFive
core 70 Sq. mm ( 35 Sq. mm 1/2 core) Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Rupees Four Hundred Ninety
existing trench / pipe of following size of cables (E) 3 1/2 core Paise EightySix Only
95 Sq. mm ( 50 Sq. mm 1/2 core)
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Rupees One Hundred FiftyThree
existing trench / pipe of following size of cables (A) 4 core 16 Paise FiftyTwo Only
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Rupees One Hundred Ninety
existing trench / pipe of following size of cables (B) 4 core 25 Paise EightyNine Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
Rupees Two Hundred
156 0.00 existing trench / pipe at road crossing or floor of following size of cable. 287.85 Mtr. -
EightySeven Paise EightyFive Only
(B) 3 core 4 Sq. mm
Qty Item of Work In Rupees Unit Amount In Words
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
Rupees Three Hundred SixtyFour
157 55.00 existing trench / pipe at road crossing or floor of following size of cables. 364.61 Mtr.
Paise SixtyOne Only
(B) 4 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
Rupees Five Hundred Ten Paise
158 143.00 existing trench / pipe at road crossing or floor of following size of cables. 510.05 Mtr.
(C) 4 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
Rupees Six Hundred SeventySix
159 44.00 existing trench / pipe at road crossing or floor of following size of cables. 676.70 Mtr.
Paise Seventy Only
(A) 4 core 10 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for
PVC insulated armoured cable complete with out going tails, insulating tape etc Rupees ThirtyThree Paise
for following size of cables. (A) 2 to 4 core ThirtyThree Only
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for
PVC insulated armoured cable complete with out going tails, insulating tape etc Rupees ThirtyEight Paise
for following size of cables. (B) 2 to 4 core 6 ThirtyEight Only
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for
PVC insulated armoured cable complete with out going tails, insulating tape etc Rupees ThirtyEight Paise
for following size of cables. (C) 2 to 4 core 10 ThirtyEight Only
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for
PVC insulated armoured cable complete with out going tails, insulating tape etc Rupees FourtySeven Paise
for following size of cables. (D) 2 to 4 core 16 FourtySeven Only
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for
PVC insulated armoured cable complete with out going tails, insulating tape etc Rupees FiftyOne Paise FiftyOne
for following size of cables. (E) 2 to 4 core 25 Only
Providing and, fixing heavy duty flange type brass double compression type
cable gland with rubber ring for PVC insulated armoured cable complete with out
Rupees One Hundred Three Paise
165 2.00 going tails, insulating tape etc for following size of cables. 103.02 Ea.
(C) 3 & 1/2 core 70 Sq. mm
Providing and, fixing heavy duty flange type brass double compression type
cable gland with rubber ring for PVC insulated armoured cable complete with out
Rupees One Hundred ThirtyOne
166 2.00 going tails, insulating tape etc for following size of cables. 131.30 Ea.
Paise Thirty Only
(D) 3 & 1/2 core 95 Sq. mm
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
Rupees Thirteen Paise Thirteen
167 9.00 terminals with brass/cadmium plated nut bolts in an approved manner. 13.13 Ea.
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
168 20.00 terminals with brass/cadmium plated nut bolts in an approved manner. 15.15 Ea. Rupees Fifteen Paise Fifteen Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
Rupees Twenty Paise Twenty
169 11.00 terminals with brass/cadmium plated nut bolts in an approved manner. 20.20 Ea.
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
Rupees TwentyFive Paise
170 7.00 terminals with brass/cadmium plated nut bolts in an approved manner. 25.25 Ea.
TwentyFive Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
171 7.00 terminals with brass/cadmium plated nut bolts in an approved manner. 40.40 Ea. Rupees Fourty Paise Fourty Only
Solder less crimping type Copper lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
172 53.00 terminals with brass/cadmium plated nut bolts in an approved manner. 8.08 Ea. Rupees Eight Paise Eight Only
Providing and erecting metallic vitrified danger notice board as per language
Rupees SixtyNine Paise SixtyNine
173 2.00 suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected 69.69 Ea.
as per IS-2551.
Providing & erecting Medium Voltage Danger Notice Board sticker as per
Rupees TwentySix Paise
174 2.00 language suggested by engineer incharge of standard size as per IS-2551 26.26 Ea.
Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground
across the road crossing or on floor with necessary material in an approved Rupees Three Hundred
manner and making the ground as per original. (C) 300 FourtyThree Paise Fourty Only
Qty Item of Work In Rupees Unit Amount In Words
Providing & laying approved make Double walled corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of
same material at required depth in existing trench for laying of cable. below Rupees NinetyFive Paise
ground / road surface for enclosing cable NinetyFive Only
(C))90 mm outer dia
Providing & laying approved make Double walled corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of
same material at required depth in existing trench for laying of cable. below Rupees One Hundred ThirtySeven
ground / road surface for enclosing cable Paise ThirtySix Only
(D)120 mm outer dia.
Making trench in all soil of suitable width of 90 cm deep for laying cable or
Rupees FiftyFive Paise FiftyFive
178 350.00 locating the fault all over the run and back filling the same and making the 55.55 Mtr.
surface as normal ground.
Supplying and erecting approved make panel mounting type Digital Voltmeter
Rupees One Thousand Two
having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel
179 1.00 1,275.63 Ea. Hundred SeventyFive Paise
board with all connection, wiring etc .with manufacturers calibration certificate.
SixtyThree Only
Supplying and erecting approved make panel mounting type Digital Ammeter
having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps Rupees One Thousand Five
180 1.00 suitable to operate on 500 Volt AC , erected on existing panel board with all 1,558.43 Ea. Hundred FiftyEight Paise
connection, wiring etc .with manufacturers calibration certificate. FourtyThree Only
Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC
Rupees Three Hundred Seventeen
181 1.00 Supply 500 V on existing panel board with necessary connections. 317.14 Ea.
Paise Fourteen Only
Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 Rupees Two Hundred
182 1.00 ratio 15 VA burden erected in existing CRCA box duly secured with insulating 274.72 Ea. SeventyFour Paise SeventyTwo
materials connected to the meter Only
Supplying and erecting approved make set of indicator lamps of LED type lamp,
Rupees FourtyThree Paise
183 3.00 lens cover, Bakelite holder complete erected with necessary connections. 43.43 Ea.
FourtyThree Only
Providing and fixing printed instruction chart both in English and Gujarati and
Rupees One Hundred Thirty Paise
184 1.00 duly framed with front glasses, for treatment of person suffering from Electric 130.29 Ea.
TwentyNine Only
shock with minimum 50" diagonally size.
Supplying stand first AID box with antiseptic cream, medicine for use on wounds
due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-
Rupees Two Hundred NinetyNine
185 2.00 aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or 299.97 Ea.
Paise NinetySeven Only
similar) etc. (All above contents shall be of standard makes)
Providing and erecting water cooler having storage capacity 25Ltr. & cooling
capacity 10 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the
water should drop by 15˚ C within a hour, The water cooler should be comprising
of hermetically sealed compressor, fan motor, condensing unit, water tank Rupees TwentySeven Thousand
surrounded by evaporating coil, thermostats, relay etc. complete with necessary Two Hundred Seventy Only
inlet & outlet connection. The body of water cooler will be made from Stainless
Supplying & erecting 5 stage single reverse osmosis water purification system
with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter
GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with
psi inline type post carbon filter auto low & high pressure switches with following
size of storage tank & LPH capacity & erected as directed
[B] 25 Ltr / Hr with 30 Ltr. Storage Tank Rupees Fifteen Thousand Six
2.00 15,620.66 Ea. Hundred Twenty Paise SixtySix
Providing Power Connection Requirement of 40 KW Including Electrical
Connect Power Charges , Inspector Approval . Liaisoning work for additional Rupees Fourty Thousand Four
load for requirement, electrical power connection charges and inspector Hundred Only
approval for power
SUB EST-03 (Electrical Work)
Supply, installation, testing, and commissioning of complete Wi-Fi system
including wireless access points (indoor/outdoor as specified), wireless
controllers, network switches, structured cabling, mounting accessories, PoE
injectors or PoE switches as required, configuration, integration with existing LAN
infrastructure, and provisioning for seamless wireless connectivity throughout
the designated area. The system shall support the latest Wi-Fi standards Rupees Sixty Thousand Five
189 2.00 (minimum Wi-Fi 6 / 802.11ax), ensure high-speed internet access, robust security 60,599.99 Ea Hundred NinetyNine Paise
protocols (WPA3), centralized management, load balancing, roaming capabilities, NinetyNine Only
and scalability for future expansion. All equipment shall be from approved makes,
compliant with relevant industry standards, and installed as per manufacturer’s
guidelines and project specifications. The scope includes necessary civil and
electrical works, testing, labeling, documentation, and training to client
personnel, complete in all respects.
Qty Item of Work In Rupees Unit Amount In Words
Supply, delivery, installation, testing, and commissioning of a new 75‑inch
LED/Smart TV for library or display use. The TV should have a minimum native
resolution of Full HD (1920×1080), with built‑in smart functionality (or
compatibility with external streaming devices), at least 2 HDMI ports, USB port(s),
and standard audio output connectivity. It should come with a table stand or wall Rupees One Lakh TwentyOne
mounting bracket (as required) along with remote, power cable, user manual, Thousand Two Hundred Only
and warranty card (minimum 1 year). The supplier shall mount or place the TV at
the designated location, ensure it works (inputs, network, picture quality), carry
out necessary cable routing (power, HDMI etc.), and hand over in fully
operational condition with demonstration to staff.
Supply and installation of a monochrome laser printer for use in the library for
tasks such as printing borrower slips, overdue notices, reports, and other
documents. The printer should have a minimum print speed of 20 pages per
Rupees TwentyTwo Thousand
191 1.00 minute (ppm), print on dual side of paper, a duty cycle of at least 10,000 pages 22220 Ea
Two Hundred Twenty Only
per month, and support USB and/or Wi-Fi connectivity. The printer should come
with starter toner, power cables, driver installation CD (or digital access), and a
one-year warranty. Setup and testing at the library site are to be included.
Supply, installation, testing, and commissioning of a 5 MP STQC-certified
dome‑type IP CCTV camera with vandal‑proof metal housing, secure firmware,
encrypted video transmission, and compliance with MeitY Essential Rupees TwentyTwo Thousand
Requirements; to be fully integrated, configured, and commissioned as a Two Hundred Twenty Only
complete, operable surveillance unit in accordance with the contract
Supply, installation, testing, and commissioning of a 5 MP STQC-certified
dome‑type IP CCTV camera with vandal‑proof metal housing, secure firmware,
encrypted video transmission, and compliance with MeitY Essential Rupees Fifteen Thousand One
Requirements; to be fully integrated, configured, and commissioned as a Hundred Fifty Only
complete, operable surveillance unit in accordance with the contract
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings
Rupees ThirtyThree Paise
192 500.00 & Junction boxes fixed with adhesive solution & Clamps with following dia of 33.33 Mtr.
ThirtyThree Only
pipes, in approved manner as directed
SITC of CAT6 UTP 23AWG Solid: Per Meter
Rupees FourtyThree Paise
193 500.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer 43.43 Mtr.
FourtyThree Only
SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded
Rupees Four Thousand Four
194 1.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer 4400.57 Ea
Hundred Paise FiftySeven Only
Supply, Installation, Testing, and Commissioning (SITC) oF 1U horizontal cable
manager for a 19-inch rack, made of powder-coated steel with a black finish. The
manager shall feature multiple D-rings, typically 5 to 7, to provide organized Rupees Two Hundred EightyTwo
routing and support for patch cables. The design should facilitate easy moves, Paise Eighty Only
adds, and changes while maintaining proper cable bend radius. Includes all
necessary M6 cage nuts and screws for mounting.
SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m Rupees Seven Hundred
196 15.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer 779.72 Ea SeventyNine Paise SeventyTwo
SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports
Advanced L2 switching and security features L2+ Static Routing Optional Rupees ThirtyOne Thousand Nine
197 1.00 “standard mode” or “surveillance mode” management user interface 193 W PoE 31996.8 Ea Hundred NinetySix Paise Eighty
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m Rupees One Thousand Nine
198 1.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer 1901.83 Ea Hundred One Paise EightyThree
Supply and installation of a 24-channel Network Video Recorder (NVR) with
support for up to 8 SATA hard drives and capable of handling video input
resolutions up to 12MP for both live preview and playback. The NVR shall support
H.264/H.265 video compression, provide simultaneous multi-channel recording Rupees SixtyFour Thousand Five
and playback, and feature user-friendly interface for remote monitoring via web Hundred Two Paise SixtyFour Only
and mobile apps. It must include advanced functionalities such as motion
detection, alarm management, and network redundancy options. The unit shall
support PoE ports (if applicable) and be compatible with standard IP cameras.
Supply and installation of 6TB Surveillance-grade Hard Disk Drive (HDD) suitable
for continuous 24x7 operation in CCTV/DVR/NVR systems. The HDD shall be
specifically designed for video surveillance applications with enhanced reliability,
high write endurance, and optimized for multiple HD video stream recording. It
Rupees Fifteen Thousand Eight
200 2.00 must support SATA III interface (6 Gbps), have a minimum spindle speed of 5400 15806.49697 Ea
Hundred Six Paise Fifty Only
RPM or higher, and include vibration resistance and thermal management
features. Scope includes delivery, integration with existing recording system
(DVR/NVR), formatting, testing, and ensuring proper recording functionality. HDD
must be from a reputed brand
Qty Item of Work In Rupees Unit Amount In Words
Supplying and erecting ceiling speaker with rated power of 6 watt/power tapping
30/15/7.5 watt available,opening angle 180 degree H * 77 degree V ,sound
Rupees One Thousand Two
201 13.00 pressure level 88 dB ,frequency response of 70Hz to 20KHz 1212 Ea
Hundred Twelve Only
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer
SITC of 16 Zone Standaone Voice Alarm controller 19” 2U rack mount type with
Rupees One Lakh FourtyThree
Built in Media Player with USB (MP3/ WAV/FLAC), Bluetooth V5.0, FM Radio
202 1.00 143369.495 Ea Thousand Three Hundred
functions, SD CARD , Pre-recorded Evacuation messages and fire alarm
SixtyNine Paise FourtyNine Only
integration supported
Supply and installation of a Voice Alarm Call Station designed for emergency
communication and public address in safety and security systems. The call station
shall support clear two-way voice communication, with built-in microphone and
speaker, and include features such as call initiation, emergency signaling, and Rupees FourtyTwo Thousand Five
203 1.00 integration capability with existing voice alarm or public address systems. It 42561.39899 Ea Hundred SixtyOne Paise Fourty
should be rugged, wall-mountable, and compliant with relevant safety standards. Only
Scope includes delivery, installation, wiring, integration with the alarm control
system, functional testing, and commissioning. The product must carry a
minimum one-year OEM warranty.
Supplying & erecting Amplifier having following specification:
Power Output :100 W (RMS):(130 W Max.)
inputs :5 Mics & 2 Aux.
frequency Response :50-15000 Hz+3db
Tone Controls :Cut & Boost type Rupees Six Thousand Two
204 1.00 Speaker Matching :4-8-ohms 70- 100 V line 6249.88 Ea Hundred FourtyNine Paise
LED Meter :5 LED Array. EightyEight Only
The amplifier suitable to operate 240V A.C.& 24 volt D.C. (Battery) with automatic
changeover from AC to Battery operation, duly protected by wrong Battery
Polarity connection. [[Approved by Competent Authority i.e. not Below the rank
of Executive Engineer ]
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings
Rupees ThirtyThree Paise
205 150.00 & Junction boxes fixed with adhesive solution & Clamps with following dia of 33.33 Mtr.
ThirtyThree Only
pipes, in approved manner as directed
Supply, Installation, Testing, and Commissioning (SITC) of: High-quality, low-
impedance, 2-core, 1.5 sqmm speaker cable for the connection of loudspeakers
Rupees TwentyTwo Paise
206 150.00 to the voice alarm amplifier/controller. The cable must be suitable for both 22.22 Mtr.
normal public address and emergency voice alarm applications, ensuring clear
and reliable audio signal transmission
SUB EST-04 (Ele Work)
Electric Motor Driven Hydrant Pump
Supplying,Installing, testing and commissioning of Fire authority approved
Electrical driven fire pump suitable for automatic/ manual operation consisting of
the following-Rates for erection of pump only Horizontal split casing, high
pressure, single/ multistage centrifugal type fire pump having cast iron body,
bronze impeller,stainless steel shaft & capable of delivering 1280 LPM against a
total head of 40Mtr while running at 2900 RPM complete with proper connection
to suction and delivery line, and including bypass arrangement for testing of Rupees One Lakh ThirtySix
207 1.00 pumps as per the requirement. Suitable mechanical seal with mounting 1,36,350.00 set Thousand Three Hundred Fifty
aggangement shall be included, having a name plate indicating suction, delivery, Only
head, discharge, stages, RPM and direction of rotation. Y Stainers at pump input
shall be provided as per manufacturer requirements. Pump shall be capable of
furnishing not less than 150% of rated capacity at a head not less than 65 % of
rated head. The shut off head shall not exceed 120% of rated head. Squirrel cage,
induction motor, TEFC type suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of
suitable HP rating for the above pump with synchronous speed of 2900 RPM
conforming to IP 55 protection & class 'F' insulation. The motor shall conform to
Electrical Motor Driven Jockey Pump
Supplying,Installing, testing & commissioning of fire authority approved
electrically driven Jockey pump suitable for automatic/manual operation
consisting of the following: Horizontal / Vertical mounted multistage jockey
pump having cast iron body, S.S. impeller, stainless shaft with mechanical seal
capable of delivering 1280 LPM against total head of 40Mtr while running at
2900 RPM complete. The system shall be complete with necessary pressure
gauge with gun metal shut off cock on delivery side including bypass arrangement
for testing of working of the pumping set as required. The pump should meet the
Rupees SeventyFive Thousand
208 1.00 requirement of IS 15105:2002 and must be approved by the local fire authority. Y- 75,750.00 set
Seven Hundred Fifty Only
Stainers at pump input shall be provided as per manufacturer requirements.
Squirrel cage induction motor suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply
of suitable HP rating for the above pump with synchronous speed of 2900 RPM
T.E.F.C type connected to pump with flexible coupling and coupling guard .
Factory fabricated Common base plate for mounting pump and motor fabricated
of mild steel channel as per manufacturer's recommendation with heavy duty
Nos. Anti Vibration pads.(Cushy foot) . grouting bolts to be provided and installed
by the vendor at his cost Suitable reinforced cement concrete pump foundations
as per manufacturer's design including foundation bolts, washers as required.
Qty Item of Work In Rupees Unit Amount In Words
Diesel Fire Pump
Supplying, Installation, Testing and commissioning of Diesel engine driven fire
pump suitable for automatic operation and consisting of following: Horizontal
type, centrifugal End Suction pump of cast iron body & bronze impeller
mechanical seal to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and
farthest outlet at specified flow of 137 m3/Hour@ 40M. head conforming to IS
Rupees Three Lakh FourtyEight
209 1.00 1520. with M.S.fabricated common base plate, coupling, coupling guard, 3,48,450.00 set
Thousand Four Hundred Fifty Only
foundation bolts etc. as required.
Diesel Fire Pump
Discharge : 1280 LPM
Pumping Head : 40 M
Pump Size : 30 HP
Fire pump panel (Combined for All Pumps) and electrical works - Starter panel
with star delta or as per CFO approved starters rated to suite pump HP with
necessary protection feautres like SPP / ELR / OL / SC / phase and on off
indicating lamps. The busbars shall be of Al - 0.8 A / sq mm size. Panel shall be
fabricated from 14G sheet steel with seven tank process powder coated and shall
be min IP 52. Panel shall have Ammeter / Voltmeter and KWh meter. Cabling /
earthing from panel to pump shall be scope of vendor without any extra cost.
Cabling - supply / laying and terminating, shall be Al XLPE armoured / Cu XLPE Rupees Two Lakh TwentyTwo
armoured / as per manufacturers specifications with necessary terminal box to Thousand Two Hundred Only
terminate the cables. Panel shall be rated min for 25KA fault level. Cable trays -
hot dip GI ladder type 16 gauge with required supports shall be used for cabling.
Panel shall have one incomer MCCB / ACB of required rating where by incoming
supply and earthing shall be terminated by electrical contractor.Starters shall be
suitable for respective motors.panel to take inputs from pressure switch/on-off
switch . Flow switch wiring shall be in suitable mms pvc consuits. Panel should
be manufactured by CPRI approved panel builder
Supply, Installation, testing and commissioning of CAST IRON Y-TYPE STRAINER Rupees Fifteen Thousand Three
211 1.00 (flanged) PN-1.6 ; body - C.I., Screen stainless steel a.150 mm dia 15,326.75 Each Hundred TwentySix Paise
SeventyFive Only
Supplying,Installing, testing & commissioning of dial type Pressure Guage having Rupees Two Thousand One
212 3.00 100 mm dial & range of 0-15 Kg/cm2 with syphon and cock. 2,151.30 Each Hundred FiftyOne Paise Thirty
Supplying,Installing, testing & commissioning of Pressure Switch required Rupees Two Thousand Twenty
accessories Only
Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s
seat duly lSI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS Rupees Four Thousand Eight
13095, of following sizes as required.a.150 mm dia Hundred FourtyEight Only
Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s
seat duly lSI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS Rupees Four Thousand Six
13095, of following sizes as required. b.100 mm dia Hundred FourtySix Only
Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s
seat duly lSI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS Rupees Three Thousand Eight
13095, of following sizes as required. c. 80 mm dia Hundred ThirtyEight Only
Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s
seat duly lSI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS Rupees Three Thousand Eight
13095, of following sizes as required. d.65 mm dia Hundred ThirtyEight Only
Supplying,Installing, testing & commissioning of CI dual plate non-return valve of
Rupees Five Thousand Two
218 2.00 following sizes conforming to IS: 5312 complete with rubber gasket, GI bolts, 5,252.00 Each
Hundred FiftyTwo Only
nuts, washers etc. as required.a.150 mm dia.
Supplying,Installing, testing & commissioning of CI dual plate non-return valve of
Rupees Four Thousand One
219 1.00 following sizes conforming to IS: 5312 complete with rubber gasket, GI bolts, 4,141.00 Each
Hundred FourtyOne Only
nuts, washers etc. as required. b.65 mm dia
Supply, Installation, Testing and Commissioning of the following sizes of flange
jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked
including accessories such as MS bracket, U clamps with Anchor fasteners, tees /
Rupees One Thousand Four
elbows / reducers / couplings / unions / bends / flanges etc., and laying on the
220 116.00 1,424.10 Mtr. Hundred TwentyFour Paise Ten
surface including painting with two coats of anticorrosive primer and two coats of
approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required. 150 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange
jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked
including accessories such as MS bracket, U clamps with Anchor fasteners, tees /
Rupees One Thousand Two
elbows / reducers / couplings / unions / bends / flanges etc., and laying on the
221 50.00 1,232.20 Mtr. Hundred ThirtyTwo Paise Twenty
surface including painting with two coats of anticorrosive primer and two coats of
approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required. 100 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange
jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked
including accessories such as MS bracket, U clamps with Anchor fasteners, tees /
elbows / reducers / couplings / unions / bends / flanges etc., and laying on the Rupees Nine Hundred FourtyNine
surface including painting with two coats of anticorrosive primer and two coats of Paise Fourty Only
approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 80 mm
Qty Item of Work In Rupees Unit Amount In Words
Supply, Installation, Testing and Commissioning of the following sizes of flange
jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked
including accessories such as MS bracket, U clamps with Anchor fasteners, tees /
elbows / reducers / couplings / unions / bends / flanges etc., and laying on the Rupees Seven Hundred
surface including painting with two coats of anticorrosive primer and two coats of Seventeen Paise Ten Only
approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 65 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange
jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked
including accessories such as MS bracket, U clamps with Anchor fasteners, tees /
elbows / reducers / couplings / unions / bends / flanges etc., and laying on the Rupees Five Hundred EightyFive
surface including painting with two coats of anticorrosive primer and two coats of Paise Eighty Only
approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 50 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange
jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked
including accessories such as MS bracket, U clamps with Anchor fasteners, tees /
elbows / reducers / couplings / unions / bends / flanges etc., and laying on the Rupees Four Hundred NinetyFour
surface including painting with two coats of anticorrosive primer and two coats of Paise Ninety Only
approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 40 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange
jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked
including accessories such as MS bracket, U clamps with Anchor fasteners, tees /
elbows / reducers / couplings / unions / bends / flanges etc., and laying on the Rupees Four Hundred FourtyNine
surface including painting with two coats of anticorrosive primer and two coats of Paise FourtyFive Only
approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 32 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange
jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked
including accessories such as MS bracket, U clamps with Anchor fasteners, tees /
elbows / reducers / couplings / unions / bends / flanges etc., and laying on the Rupees Two Hundred FiftyTwo
surface including painting with two coats of anticorrosive primer and two coats of Paise Fifty Only
approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 25 mm
Supplying,Installing, testing & commissioning of Weather proof standard fire
hose cabinet (750 mm x 600 mm x 300 mm deep) made out of 16 SWG powder
coated M.S. sheet having single or double opening glazed (4.0 mm thick glass)
shutter including necessary locking arrangement by allen key, stove enamelled Rupees Five Thousand One
Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked on front, Hundred FiftyOne Only
suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe &
nozzle spanner (For External Hydrant).
Supply, Installation, Testing and Commissioning of Weather proof Standard Fire
Hose Cabinet wall mounting type (450 mm x 600 mm x 250 mm deep) having
Rupees One Thousand Eight
229 7.00 single or double opening with necessary locking arrangement by allan key 1,818.00 Each
Hundred Eighteen Only
suitable for housing 1 nos. hose pipe, 1 no. Branch pipe & nozzle spanner.
Supply ,installation, testing and commissioning S.S. Single Headed Fire Hydrant
Valve with 80mm N.B. flanged inlet, 63 mm dia female instantaneous outlet type.
S.S. coupling, blankcap, chain, twist release type lug & all accessories Conforming Rupees Three Thousand Thirty
to IS:5290. Including fixing with supports, flanged tapping from wet riser,orifice Only
plate complete as required by the Local Fire Authority.
Supply, installation, testing and commissioning non-percolating rubber reinforced
Rupees Three Thousand Two
231 7.00 lined fire Hose pipe (as per IS:903) of 63 mm dia and 15 mtrs long. 3,232.00 Each
Hundred ThirtyTwo Only
Supply, Installation, Testing and commissioning of 63 mm dia instantaneous
232 7.00 808.00 Each Rupees Eight Hundred Eight Only
pattern aluminium short branch pipe
Supply, installation, testing and commissioning of First Aid Hose Reel equipment
conforming to IS:884 comprising of hose reel drum, 8 mm shut off nozzle, Rubber
hose reel tubing as per IS: 444 of 25 mm dia x 45 mtr. long, painting, Manual fix Rupees Four Thousand Eight
type with fixing bracket, anchor fastener, bolts & nuts etc. complete as required Hundred FourtyEight Only
by Local Fire Authority.
Supply, installation, testing and commissioning of SS Ball Valve.
234 7.00 808.00 Each Rupees Eight Hundred Eight Only
Supply, installation, testing and commissioning of Cast lron Four Way Fire
Brigade Inlet as per IS:904 having 63 mm dia inlet with blank cap and chain with Rupees Four Thousand Eight
necessary fittings, flanges, nut bolts etc. complete as required. Hundred FourtyEight Only
Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve Rupees Three Thousand Five
with necessary fittings. Size: 25 mm (For Riser) Hundred ThirtyFive Only
Supply, Installation, Testing and commissioning of Quartzoid Bulb type Sprinkler Rupees Three Hundred FiftyThree
Heads. (a) Pendent Sprinkler 57°C - standard response Paise Fifty Only
Supply, installation, testing and commissioning of ABC type Fire Extinguisher of
Rupees One Thousand Four
6.0 kg confirm to IS:15683, with ISI marked / TAC approved fitted with required
238 4.00 1,424.10 Each Hundred TwentyFour Paise Ten
accessories including wall suspension brackets.
Qty Item of Work In Rupees Unit Amount In Words
Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire
Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved fitted Rupees Three Thousand Eight
with required accessories including wall suspension brackets. Hundred ThirtyEight Only
Supplying,Installing, testing & commissioning of fire alarm and pump trigger
240 4.00 system as per requirement and specification consisting of following items. 606.00 Each Rupees Six Hundred Six Only
Manual call point:
Supplying,Installing, testing & commissioning of fire alarm and pump trigger
Rupees Seven Hundred FiftySeven
241 4.00 system as per requirement and specification consisting of following items. 757.50 Each
Paise Fifty Only
Supplying,Installing, testing & commissioning of fire alarm and pump trigger
242 4.00 system as per requirement and specification consisting of following items. Pump 505.00 Each Rupees Five Hundred Five Only
On / Off switch:
Supplying,Installing, testing & commissioning of fire alarm and pump trigger
Rupees Two Hundred TwentyTwo
243 55.00 system as per requirement and specification consisting of following items. 4 core 222.20 MTR
Paise Twenty Only
1.5 sq.mm cu. Flexinble Cable
Supplying,Installing, testing & commissioning of fire alarm and pump trigger
Rupees One Hundred Eleven
244 66.00 system as per requirement and specification consisting of following items. 2 core 111.10 MTR
1.5 sq.mm cu. Flexinble cable
Providing and fixing M.S. structural work fabricated from standard sections, (MS
rounds, angles, channels etc.) including cutting to size, drilling, welding, including
cost of fasteners, clamps in RCC structural members as directed, including two or Rupees One Hundred Six Paise
more coats of synthetic paint over one coat of primer after surface preparation Five Only
including cutting and making good walls (Structural other than pipe supoort).
Painting of above ground lines with two coats of red oxide primer and two coat of Rupees Seven Hundred Seven
sinthetic enamal paint (PO.Red) Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Fire Rupees Two Hundred FiftyTwo
lift size: 4" X 12" Paise Fifty Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Fire Rupees Two Hundred FiftyTwo
Hydrant: 4" X 12" Paise Fifty Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Rupees One Hundred FiftyOne
"DCP" Extinguisher: 8" X 4" Paise Fifty Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Rupees One Hundred FiftyOne
"CO2" Extinguisher: 8" x 4" Paise Fifty Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: In Rupees Three Hundred FiftyThree
case of Fire, do not use lift, use staircase: 8" x 8" Paise Fifty Only
Coating & Wrapping for underground pipe Wrapping Tape(150mm wide x 4mm Rupees One Thousand Two
thick) Hundred Twelve Only
Getting Approval/NOC of Fire protection system from local fire authority and any
other relevant statutory authority at initial and various other stages of work, Rupees One Lakh FiftyOne
including preparation of report/drawings as per fire authority. Thousand Five Hundred Only
SUB EST-05 (Fire Fighting Work )
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
Rupees SeventyTwo Paise
254 110.00 concealed as directed including necessary fittings etc. including testing of pipe 72.65 Rmt
and joints and fixing the same with adhesive solvent, including cost of all
Providing laying and jointing in true line and level 20mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
Rupees One Hundred NinetyEight
255 110.00 concealed as directed including necessary fittings etc. including testing of pipe 198.97 Rmt
Paise NinetySeven Only
and joints and fixing the same with adhesive solvent, including cost of all
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
Rupees NinetyOne Paise
256 88.00 concealed as directed including necessary fittings etc. including testing of pipe 91.84 Rmt
EightyFour Only
and joints and fixing the same with adhesive solvent, including cost of all
Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
Rupees One Hundred Nineteen
257 61.00 concealed as directed including necessary fittings etc. including testing of pipe 119.15 Rmt
Paise Fifteen Only
and joints and fixing the same with adhesive solvent, including cost of all
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
Rupees One Hundred FourtyEight
258 83.00 concealed as directed including necessary fittings etc. including testing of pipe 148.12 Rmt
Paise Twelve Only
and joints and fixing the same with adhesive solvent, including cost of all
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees One Hundred NinetyFive
concealed as directed including necessary fittings etc. including testing of pipe Paise SixtySeven Only
and joints and fixing the same with adhesive solvent, including cost of all
Qty Item of Work In Rupees Unit Amount In Words
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of
260 22.00 following dia. nominal bore tube fittings and clamps including making good the 205.00 Rmt Rupees Two Hundred Five Only
wall, ceiling and floor etc. complete. [B] 20 mm. All Conceal Pipe line Cold & Hot
Water & RO Water
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL
VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts,
Rupees One Thousand Eight
261 3.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 1,818.00 Nos.
Hundred Eighteen Only
charge for water supply lines of the following Nominal bore (NB) size: 25 mm
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL
VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts, Rupees Two Thousand Seven
262 3.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 2,777.50 Nos. Hundred SeventySeven Paise Fifty
charge for water supply lines of the following Nominal bore (NB) size: 32mm Only
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL
VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts, Rupees Three Thousand Five
263 6.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 3,595.60 Nos. Hundred NinetyFive Paise Sixty
charge for water supply lines of the following Nominal bore (NB) size: 40mm Only
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL
VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts, Rupees Four Thousand Eight
264 6.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 4,898.50 Nos. Hundred NinetyEight Paise Fifty
charge for water supply lines of the following Nominal bore (NB) size: 50mm Only
Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non
return valve confirming to IS 778, with screwed / flanged ends, 20 Kg/m2 of Rupees Two Thousand Five
approved make, on water supply lines of the following Nominal bore (NB) size: Hundred TwentyFive Only
Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)
conforming to IS 13592-1992 with one end plain and other end socketed with
rubber ring, & fittings conforming to ISI 14735-1999 of approved make for
drainage system pipe line, pipe shall be jointed with each other with rubber
lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm
Rupees Eight Hundred ThirtyFive
266 135.00 diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or 835.15 Rmt
Paise Fifteen Only
shall be concealed in walls as directed including necessary fittings such as bends,
shoes etc. including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials. (Soil + Waste + Rain Water)
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure
poluthene pipes of the following outside Dia. Low densidy, complete with special Rupees One Hundred
267 50.00 falnge compression type fittings, wall clipsetc. including making good the wall 123.29 Rmt TwentyThree Paise TwentyNine
ceiling and floor.(C) 32mm (waste water for Wash basin) Only
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure
poluthene pipes of the following outside Dia. Low densidy, complete with special Rupees One Hundred EightyNine
falnge compression type fittings, wall clipsetc. including making good the wall Paise Twenty Only
ceiling and floor.(E) 50mm
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure
Rupees Two Hundred
polythene pipes of the following outside Dia. Low densidy, complete with special
269 118.00 277.43 Rmt SeventySeven Paise FourtyThree
falnge compression type fittings, wall clipsetc. including making good the wall
ceiling and floor.(F) 75mm
Providing, fixing, jointing and testing IS 14735 for Drain PVC SWR 'P' - traps of
self cleansing design with water seal not less than 50 mm., with or without vent,
cutting chases / hole in floors / slabs and bringing the same in proper condition
and shape after placing the trap in right position in case of suspended / open
270 19.00 606.00 Each Rupees Six Hundred Six Only
plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc.
complete, as required. The trap shall be 'P' type, of following sizes: 110 x
mm OD inlet / outlet
Providing and fixing Heavy class S.S. grating with Mosquito proof S.S. strainer
of Chilly or equivalent make, as approved, (cockroach trap) including setting in Rupees Four Hundred Nineteen
floor with cement mortor to match with floor finish as per architect Paise Fifteen Only
Providing and fixing in position cowel went to pipes.
Rupees Three Hundred
EightyNine Paise SeventyFour Only
Providing and fixing in position cowel went to pipes. Rupees Five Hundred One Paise
(C) 100mm dia EightySeven Only
Providing laying (to level or slopes) and jointing reinforced concrete Light duty
non-pressure pipes I.S. class NP2 of the following internal diameter with collars Rupees Two Hundred ThirtyEight
and butt ends prepared for collar joints including testing of joints complete.(B Paise SixtyOne Only
Providing laying (to level or slopes) and jointing reinforced concrete Light duty
non-pressure pipes I.S. class NP2 of the following internal diameter with collars Rupees Three Hundred
and butt ends prepared for collar joints including testing of joints complete.(C) FourtyThree Paise Sixty Only
Rupees One Thousand Two
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and
276 2.00 1,292.19 Each Hundred NinetyTwo Paise
water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard
weight.(i) Square mouth traps. (A) 100mm x 100mm size P type.
Rupees Four Hundred NinetySix
277 2.00 Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap 496.72 Each
Paise SeventyTwo Only
(Standard pattern) te weight of cover to be not less 4.53 Kg.)
Qty Item of Work In Rupees Unit Amount In Words
Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm
Rupees Two Thousand Seventeen
278 2.00 including 500mm x 450mm C.I. horizontal grating wih frame complete. 2,017.19 Each
Paise Nineteen Only
C.I. Cover with frame 500mm x 700mm Rupees One Thousand One
279 2.00 1,140.96 Each Hundred Fourty Paise NinetySix
Constructing brick masonry chamber for underground C.I. Inspection chamber
and bends with bricks having crushing strength not less than 35Kg/ Cm2 in C.M.
1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg. (Wt. of
cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement Rupees Seven Thousand One
280 6.00 :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 7,180.44 Each Hundred Eighty Paise FourtyFour
inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating Only
coat of neat cement on walls and bed concrete etc. complete.(iii) Inside
dimensions 600mm x 850 mm and 450mm deep for pipe lines with three or
Extra over items 24.44 for every additional depth of 0.1M. Of part thereof
Rupees Three Hundred
281 1.00 beyond 450mm depth for Brick masonry chamber.(iii) for 600mm x 850mm size. 325.59 Each
TwentyFive Paise FiftyNine Only
C.I. Cover without frame 455mm x 610mm
Rupees Nine Hundred SixtyFive
Paise FourtyNine Only
Installing, testing and commissioing of Pump system comprising of horizontal
Submersible Pumps with SS casing, SS impeller, SS Shaft and driven by 415 V AC,
3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied with all
accessories viz., base plate, coupling, motor, VFD based control panel, dry run &
overload protection, cabling up to panel, earthing, GI medium duty suction,
delivery & header pipes, pressure gauge, pressure switches, pressure transmitter,
suction ball valves & delivery ball valves & check valves etc., complete.
200 lpm., 40mtr., (To GROUND FLOOR TO TERRACE TANK) FOR DOMESTIC Rupees Fifty Thousand Five
WATER Hundred Only
Supply, installation, testing & commissioning of Water level controller for the OH
284 tanks with switches, hardwares, interlocking with panel, etc. - - -
For Under Ground tank & OH Tank Rupees Ten Thousand One
SUB EST-06 (Plumbing Work )
Total Amount ( Civil, Interior,Furniture, Electrical, Ele,Fire Fighting, & Plumbing Work) Total Amount
Total Amount ( Civil, Interior,Furniture, Electrical, Ele,Fire Fighting, & Plumbing Work) Total Amount
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
1.00 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall
2.00 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3.00 GST and Income tax TDS will be deducted at a source while making payments of bills
4.00 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C
Signature of Contractor with Seal Signature of Contracting Authority with Seal
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01_NIT Document Drangadhra Study Hall.pdf
02_SAG_Standard Bidding Document_Dhrangadhra Study Hall.pdf
03_Schedule-B Dhrangadhra Study Hall.pdf
04_Index of Specification Dhrangadhra Study Hall.pdf
06_R and B Book let - Building Specification.pdf
07_General Electrical and ELV Specification for Dhrangadhra.pdf
08_General Fire fighting system Specification for Dhrangadhra.pdf
09_General Plumbing Specification for Dhrangadhra.pdf
10_ Make List-Drangadhra Study Hall.pdf
11_Dhrangadhra Study Hall drawing set.pdf
05_Seprate Technical Specification_Dhrangadhra.pdf
Download all tender documents and submit your bid