WBPHED/AE/SMSD/NIeT- 01 OF 2025-2026

Amount

Supply & delivery at site the Submersible Pump directly Coupled with 3 Phase, 50 Cycles, Water Cooled Submersible Motor for installation in 183mm. X 125mm.dia deep Tubewell as per following specification:- a) Discharge of Clear water = Q = 22 m3/hr. b) Total Head (H) = 60 M. Motor should work within a voltage range 400V + 10% Impeller of the pump should be of G.M./Bronze/S.S.., Bowl dia should not exceed 150mm. O/D.[Test Certificate & Curve Chart are to be submitted at the time of delivery].

Supply & delivery of following items:-

3 MTR long 80mm dia UPVC standard type column pipe with both side threaded and one end side socketed with rigisterd KMPG.

80 mm dia CI Top and Bottom adopter.

Heavy type 250 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design.

M.S. Reducer . Size:- 80m /50 m

Heavy type suitable dia MS suspension clamp along with nuts bolts and washer.

Naylon rope 18 mm. dia for protection of pumping machinery.

80 mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90° bend-1 no., Cl flanged tee-lno. blank flange-1 no., Cl/ MS flanged short piece 0.50 mtr.-1 no, Cl/ MS flanged pipe 1 mtr. 1 no. etc as per IS specification and certification for Construction of delivery pipe line and wash out line.

Supply & delivery of following electrical items:-

Motor Control Panel (Star delta Starter). [Make:- BCH (model:- CPSDPYKN ) or other approved make of equivalent spec.] (range:- 8.9 to 13.5A)

1.1 KV grade 4 sq.mm x 3 Core water proof flat submersible cable for above motor.

Withdrawing of 15 HP submersible pump motor set from old TW with all tools & tackles for lifting 160 ft. 3'' Column pipe after all precautionary measures.

Lowering of above supplied motor with 160 ft. 80mm. UPVC column pipe assembly with the help of all tools & tackles by connecting all electrical mechanical connection as per direction of EIC.

Making brick pillar 0.25 mtr x 0.25 mtr. for supporting of valves and pipes with 12 mm thick plaster and net cement finish complete

Making suitable size pump foundation with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete

Supply & delivery of the PVC moulded Chair .

Supply & delivery of thePVC moulded Table .

Supply, delivery & installation of the following Fan as directed by EIC. a) Ceiling Fan 1200mm sweep OR b) Wall mounting Fan 400 mm sweep including Fan clamp as and when required.

Dismatling charges of Old starter panel and fitting of new starter control panel.

Pressure gauge [H.Guru/ Febig] 150 mm dia [0-7Kg/Sq.cm] brass cock and fitting complete[This cost includes 15 mm. dia G.I. pipes and specials]

Carrying of tools and other accessories from siliguri to work site and back with old motor(Rate including loading & unloading complete).

N.B- Make as per PHE approved vendar list.

Add GST @18%

ANJALI ENTERPRISE (BID ID -6676334)

THE BANERJEE CONCERN (BID ID -6712920)