Procurement of Ash handling Spares for AHP-1 of RTPS

Sno Item Code Item Name Specification Unit Qty Brand offered % GST Included HSN Bidders compliance

1 6111409011 DUMP GATE ASSSEMBLY DRY SYSTEM DUMP GATE FOR U-1&4MAKE:INDUREMATERIAL OF CONSTRUCTION (MOC) : EN8 NUMBERS 15

2 6111409186 SILICON DUMP GATE SEAL FOR DUMP GATE FOR U-1&4 NUMBERS 50

3 6111409216 PISTON SEAL FOR 6" PIVOT MOUNT DRY SYSTEM FOR DUMP GATE Piston seal for 6" Pivot mounted cylinder NUMBERS 30

4 6111453142 VALVE BODY FOR 6" SEG VALVE 6" SEGRIGATING VALVE BODY FOR FLY ASH LINES WITH POWER CYLINDER. VALVE SEAT PROVIDED ON BOTH SIDE OF VALVE BODY.MATERIAL FOR BODY - 2.5% Ni CI, IS 210 Gr, FG 200, FOR SEAT - 4.5% Ni CI 600 BHN SETS 4

5 611010110R VALVE SEAT FOR MHV VALVE SEAT FOR 8"X6" MATERIAL HANDLING VALVE.MTERIAL - Ni hard type - 4, Hardness - 550-600 BHN NUMBERS 300

6 611010124R VALVE BODY FOR MHV - LEFT VALVE BODY - LEFT FOR 8" X 6" MATERIAL HANDLING VALVE.MHV CONSISTING FLANGE BODY AND SLIDE GATE HOuSING IN ASSEMBLED CONDITION, MATERIAL - 2.5% Ni CI, IS 210 Gr, FG 200 NUMBERS 10

7 611010201R SLIDE GATE -8 " SV,SS-316-S SLIDE GATE FOR 8" SEGRIGATING VALVES, MATL: SS- 316.Thickness of plate - 3.5mm (+0.00/ -0.05)surface ground finish on both sides of the plate. NUMBERS 100

8 611010202R SS SLIDE GATE FOR 6 " SV SLIDE GATE OF SEGRIGATING VALVES NUMBERS 5

9 611010214R PISTON SEAL FOR 6" POWER CYL 6"ODX2"ID,PISTON SEAL KIT FOR SEGRATING VALVE SETS 50

10 611010302R NOZZELE TIPS (SET OF 22 NOS) FLY ASH SYSTEM WETTING HEAD ITEMS SETS 5

11 611010303R FOG JET NOZZELES ( 3 HOLDER 21 FLY ASH SYSTEM WETTING HEAD ITEMS,3 HOLDER BRASS MATERIAL AND 21NOS NOZZLE OF SS MATERIAL SETS 10

12 611010311R TAIL PIPE FLY ASH SYSTEM WETTING HEAD ITEMS TAIL PIPE,CAST IRON TOOL PIECE WITH FLANGE,OD-240MM,ID-200MM,HEIGHT-480MM,FLANGE OD-400MM WITH 12NOS HOLES NUMBERS 5

13 611020111R SPLIT LANTERN RING(SET OF3PCS) BOTTOM ASH SYSTEM CLINKER GRINDER SPLIT LENTERN RING (SETOF3 PCS) SETS 20

14 611020123R OIL SEAL 75X95X13 MM BOTTOM ASH SYSTEM CLINKER GRINDER OIL SEAL 75*95*13 MM NUMBERS 100

15 611020128R DRIVING SPROCKET 12 TEETH BOTTOM ASH SYSTEM CLINKER GRINDER DRIVING SPROCKET 5.74" PCD 12 NUMBERS 8

16 611020129R DRIVEN SPROCKET 42 TEETH BOTTOM ASH SYSTEM CLINKER GRINDER DRIVEN SPROCKET 20.07" 42 TEETH NUMBERS 8

17 611020131R EJECTOR FEED SUMP FOR 2' CG BOTTOM ASH SYSTEM CLINKER GRINDER FEED SUMP NUMBERS 3

18 611020140R C G ROLLER HOUSING Clinker grinder roller housing for unit 1&2. NUMBERS 3

19 611020427R OIL SEAL 42 X 62 X 7 MM OIL SEAL FOR FLUID COUPLING. NUMBERS 20

20 611030212B 350NB- COUP. ASSY.IS TO IS 350NB SLEEVE COUPLING ASSEMBLY,MAKE :INDURE, PIPE TO PIPE,ASSY.NO.:A-6014-IS-(SPL),WITH RUBBER GASKET(Neoprene),STUD,NUTS & washers(12 Nos) SETS 25

21 611040114R EZY COUPLING FOLLOWER 8" SPECIAL PIPES & FITTINGS INDURITE FITTINGS EZY COUPLING FOLLOWER 8" NUMBERS 20

22 611040116R 8" D NEOPRENE RUBBER GASKET-CI 8"Dia neopreene rubber gasket for CI pipes.Material:Polymer Rubber,65-70 shore hardness,Contents: Neopreen polymer(Hydrocorbon)-55%, Additives & filler -32%, Plasticzer- 5.4%,Valcanzing agent- 4.3%, Activator- 3.3%.ID-235 X Thick-15 X Width-24 mm as per drg. NUMBERS 500

23 611040120R ACI LATERAL 8X8X8 -45 DEG SPECIAL PIPES & FITTINGS ACI LATERAL 8"X 8"X 8" DIA, 45 DEG. NUMBERS 6

24 612010311R FLUSHING NOZZLE FOR WH SS nozzle for wetting head ejector flushing line. Material - SS 400 serieas 500 to 550 BHN hardness. NUMBERS 20

25 612020114R CG BEARING SUPPORT UNIT 3 Clinker grinder bearing support for unit 3. NUMBERS 3

26 612020141R CG DRIVING GEAR FOR UNIT 3 Clinker grinder driving gear for unit 3, material - cast steel. NUMBERS 4

27 612020215R THROAT FOR HYDRO EJECTOR Throat for 8"x8" hydro ejector of unit 3.Material - Ni hard type 4 IS 4771. Ni - 4.5%. Hardness- 500BHN. NUMBERS 5

28 612020308R DOOR GUIDE RAIL (LEFT) Door guide rail (left) for feed gate. NUMBERS 12

29 612040118R 6" Q NEOPRENE RUB GASKET 6" Dia neopreene rubber gasket for CI pipes.Material:Polymer rubber, 65-70 shore hardness, Contents: Neopreen polymer(Hydrocorbon)-55%, Additives & filler - 32%, Plasticzer - 5.4%, valcanizing agent - 4.3%, Activator - 3.3%.Dimns. ID-178X Thick-12 X Width-24mm as per drg.. NUMBERS 300

30 613111348B 200NB BUTTERFLY VALVE ACT PN6 BUTTERFLY VALVE MODEL-44 FOR AHP U#3,SIZE:200NB,TYPE:WAFER TYPE(CONCENTRIC DESIGN),ACT OPERATED+LSB,TYPE OF OPERATION:PNEUMATIC ACTUATED,PRESSURE CLASS/RATING:PN6,TESTING STANDARD:EN12266-1(BS:6755-1),DESIGN STANDARD:EN593(BS:5155),MAX.WORKING PRESSURE:508mm of Hg(g),MOC: BODY:CI-IS:210Gr.FG260,DISC:DI-ASTM A536 Gr.60-40-18,STEM:ASTM A276 TYPE 410,SEAT:EPDM,STEM BEARING:DELRIN,DRAWING NO:EEAHP2/BTPS/BFV/08,MAKE:BDK. NUMBERS 1