SPL REPAIR OF PERIMETER SECURITY WALL AT KITCHAMA AND BLDG NO P-666 OF CI DET AT BARAMULLA UNDER GE 969 EWS

Amount

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Demolition of Cement Concrete of any description and in any position (below or above ground level), complete all as specified and as directed.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonary built in cement mortar, complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground, complete all as specified and as directed.

Demolition of Cement Concrete (reinforced) of any description and in any position (below or above ground level), complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 (40mm graded aggregate) in foundations, filling & mass concrete, complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6), complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 on Brick/ concrete surfeses using waterproofing compound @ 3% by weight of cement and finished surfaces even & smooth without using extra cement. (Note - WPC to be measured and paid separately).

M&L for rendering 15 mm thick in CM 1:4 on Brick/ concrete surfeses on stone masonary surfaces or surface other than fair face of brick-work or on one side of lathing using waterproofing compound @ 3% by weight of cement and finished surfaces even & smooth without using extra cement. (Note - WPC to be measured and paid separately).

Supply only WPC compound, complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, bed blocks etc. including all necessary foRm works, complete all as specified and as directed.

S&F mild steel posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets for securing wire mesh etc including MS bars for tightning chain link necessary drilling bolting reveting etc. & similar work, fence with all nut & bolts complete confoRming to Fe- 410 - or Fe-310-0, complete all as specified and as directed.

All as per item No 13 but fixing only, complete all as specified and as directed.

S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing & Straining & fixing to any type of Standared rails straining bolts including securing or tying at crossing with & provision of galvanised mild steel wire stapples or steel pins etc, complete all as specified and as directed.

All as per item No 15 above but fixing in repairs after restraining resecuring and good staples etc, complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 etc, complete all as specified and as directed.

All as item above17 but using old stone masonary in CM (1:4), complete all as specified and as directed.

M&L for RCC (nominal mix) type B-1 1:2:4 (using 20mm graded aggregate) fdns, including rafts, footings, foundation beams; plinth beams; bases for columns, complete all as specified and as directed.

M&L for RCC (nominal mix) type B-1 1:2:4 (using 20mm graded aggregate) Columns, pillars, piers, posts and struts ,complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; flat surfaces incl fair finish, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat surfaces incl fair finished, complete all as specified and as directed.

M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with ms wire (annealed not less than 0.9 mm dia. etc, complete all as specified and as directed.

All as per item No 23 above but 5 mm dia and over up to 10 mm dia in stirrups/binder/ spacers and rings, complete all as specified and as directed.

Dismantling structural steel work including doors, gates, grills, gratings but excluding framed truss etc, complete all as specified and as directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks & similar work confoRming to Fe 290-0 Gde E-165 including dismantling, complete all as specified and as directed.

M&L for preparing surfaces of newly or previously untreated steel or iron surfaces of any description over 10 cm in width or girth not otherwise described and apply two coats of sythetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparing surfaces of old steel or iron surfaces of any description over 10 cm in width or girth not otherwise described annd apply two coats of sythetic enamel paint, complete all as specified and as directed.

M&L for Preparing on new plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed.

M&L for Preparing on old plastered surfaces of wall and applying one coats of cement base paint, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed.

S&F galvanised,corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screw and washers in roofs, walls etc incl dismantling, complete all as specified and as directed.

S&F 80 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 gm incl dismantling, complete all as specified and as directed.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc, complete all as specified and as directed.

M&L 4 mm thick veneered decorative, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling, complete all as specified and as directed.

M&L 4 mm thick veneered decorative, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on wall, complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed.

Dismantling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm, complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm, complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site, complete all as specified and as directed.

M&L for 12 mm thick plywood ,grade BWR , type BB, fixed with screws to timber frame, complete all as specified and as directed.

MS Cold rolled Butt hinges medium weight 75 mm long , complete all as specified and as directed.

S&F 100mm long Anodised Aluminium tower bolt, complete all as specified and as directed.

S&F 100mm long extruded aluminium alloy handle, complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-O (using 12.5 graded aggregate) as in floors finished even and fair, complete all as specified and as directed.

M&L, Non-skid ceramic tiles 7 to 8 mm area of each tile not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding 15mm thick screed bed or bedding layer in cement mortar (1:4), complete all as specified and as directed.

M&L for Kota stone slabs, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar (1:4) including rubbing, cutting and polishing (mirror type), complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

S&F glazed ceramic coloured tiles in verticles surfaces of size 600x300x7/9 mm thick set and jointed in neat cement slurryy and pointed white or coloured cement to match tile surface over and including 10 mm thick plaster in cement and sand mortar 1:4, complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

M&L for GI tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top all as specified and directed for 15 mm bore, complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

S&F 15mm bore Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fency type, complete all as specified and as directed.

S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe, complete all as specified and as directed.

M&L for complete removal of existing treatment of surfaces and applying two coats of cement base paint on walls surfaces, complete all as specified and as directed.

M&L for complete removal of existing treatment of surfaces and applying two coat of oil bound distempering with emulsion on walls over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering, complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of old or new galvanised surfaces (on CGI/PGI roof sheet) of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer, complete all as specified and as directed.

S&F Aluminium conductor, steel reinforced, complete all as specified and as directed.

S&F Shackle Type, Porcelain, vitreous, white, brown or green, insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, of size 75 mm x 90 mm and dia of bolt 12mm, complete all as specified and as directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles as necessary gusset plates riveting, etc confroming, to Fe. 290 Gde E-165, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire aRmoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium Conductor of size 50 sq mm 3.5 core, complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for laying of cables up to proper level, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.

Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point, complete all as specified and as directed.

Supply and filling dry river sand in trenches for cushioning of LT UG cable and punning down, complete all as directed. (Note : The punned down thickness shall be measured and paid).

M&L for well burnt as class 'B' bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench, complete all as specified and as directed.

M&L for cement concrete for foundation fillings and mass conctere type D2 (1:4:8) using 40 mm graded aggregate, complete all as specified and as directed.

M&L for cement concrete for coping of poles using B-1 1:2:4, 20 mm graded aggregate, smooth finishing without using extra cement, complete al as specified and as directed.

M& for cement concrete for foundation fillings and mass conctere type C-2 (1:3:6) using 40 mm graded aggregate,complete all as specified and as directed.

S&F steel tubular swaged poles complete with MS base plate continuously welded to pole, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (09 metres long) including two coat of black bituminous paint internally throughout and externally upto embedded portion and applying two coats of synthetic enamel paint over a coat of red oxide primer with black and white strip of 30 cm each upto 1.50 metre height and two coats of aluminium paint over a coat of red oxide primer externally on remaning exposed surface after preparation of surface and eraction in position, complete all as specified and as directed. (earth work, PCC and coping will be measured and paid separately)

Supply& fixing cubical type hot pressed moulded of size 500x 500 x 105 mm juction box for pole mounted teRminal box suitable for mounting on round pole and suitable arrangement for fixing bracket complete with one MCCB 4 Pole 100 Amps capacity with 20O Amp Bus bar TPN suitable to terminate loop in/out cables upto 50 sqmm.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :-

(a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way.

(b) One 3 pin 5 Amp switch socket outlet on same board.

(c) One 3 pin 5 Amp switch socket outlet on independent board

M&L for point wiring in PVC casing caping with 2.5 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 3 pin 15 Amps on independent board with 1.5 Sqmm copper conductor cable as earth lead connected to common earth and dolly.

S & F in repair Switch piano flush type single pole, one way 5 Amp 240 volts, complete all as specified and as directed.

S&F switch socket outlet two in 1, 3 Pin, 5 Amp, flush type, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universal complete all as specified and as directed.

S&F LED light fitting 1x20W, 220 AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S&F lamp Holder, PVC/Polycarbonate type with black plate suitable for batten fitting, complete all as specified and as directed.

Supply and fix ceiling rose 3 terminal /PVC/ Polycarbonate, isolated body, complete all as specified and as directed.

S&F 1100 V grade heavy duty U/G cable with PVC insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed one twin core cable flat or circular of size 25 sqmmX2 core, complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed.

S&F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed.

S&F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed.

Supply and fix LED inverter Bulb 12 Watt, complete all as specified and as directed.

Supply and fixing square shape 36 watt 220 volts AC recessed/ Surface 2X2 FET type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, theRmostate, NRV, connection piece etc.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below noRmal ground level) with top edge of the plate not less than 1.5 m below noRmal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc

Note:- Schedule of credit Rs 73,779.65 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S MUKHTAR CONSTRUCTION CO (BID ID -3329270)

Javeed And Co (BID ID -3330715)

ALCO ENGINEERSPVT LTD (BID ID -3330039)

M/S WEB COMPNAY (BID ID -3330159)

M/S Tajamul Ah Buchh (BID ID -3330059)

M/S MARVEL ELECTRICALS (BID ID -3329995)

m/s mohd saleem and co (BID ID -3328848)

M/S NORTHERN ELECTRICAL WORKS (BID ID -3328302)

M/S MOHAMAD YOUSUF AKHOON AND SONS (BID ID -3327996)