Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC | L1 | Accepted-AOC Admitted Found Reasonable for Acceptance | |
| 2 | L2₹21.2 L+₹1.4 L (6.99%)Rejected-Finance HOUSE NO 105 PANTHEERMA VILLAI NEAR NELLIKKAVILLAI CSI CHURCH VELLAYAMBALAM VENCODE P O KANYAKUMARI DIST TAMIL NADU 629 171 | VENCODE | KANYAKUMARI | TAMIL NADU | 629171 | L2 | Rejected-Finance Rejected L1 being accepted |
Tender Value
₹19.5 L
EMD Value
₹39,000
Closing Date
13 Sept 2022, 6:00 pmClosed
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum-06
As per tender documents
2022_MES_545450_1
GE (ARMY) TVM 9473/E8
Open Tender
Civil Works
Item Rate
180 days
Trivandrum
As per NIT
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹39,000
Yes
11 Oct 2022
16 Aug 2022
20 Sept 2022
16 Aug 2022
13 Sept 2022
30 Aug 2022
Amount
Excavation in Post holes ( or similar holes ) in hard dense soil, each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering , and removing surplus soil to a distance n exc 50 M and making good surface etc complete all as specified and directed
M&L for PCC 1:3:6 type C-2(using 40mm graded broken stone agg) as in foundation, filling mass concrete etc complete all as specified and directed
M&L for Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area in exc 100 sq. cm, with or without chamfered angeles and flat, splayed, rounded or mitred tops etc complete all as specified and directed.
M&L for deformed TMT bars in reinforcement 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed
All as per item no 5 here-in-before but 5mm to 8mm dia for stirrups, spacers and binders
M&L for mild steel round bars in reinforcement 12 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing with clips quality conforming to Fe - 410 W (Gde E-250) quality - A or Fe 290 (Gde E-165) etc complete all as specified and directed
S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed
S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long etc complete all as specified and directed
Supply only chain link MS Galvanised fencing of size 50mm x 50mm x 4mm thick wire etc complete all as specified and directed
Fixing Only Chain Link Fencing including line wires, any mesh, size and type to any type of standrads, rails, straining bolts, etc. including provision of binding wire etc complete all as specified and directed
M&L for two coat of Synthetic enamel paint over a coat zinc chrome primer, incl preparing new steel surface of any description, over 10cm in width or girth, not otherwise etc complete all as specified and directed
S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc complete all as specified and directed (each line wire to be measured).
M&L for surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil etc complete all as specified and directed
M& L Plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in sub base in 100mm thick etc complete all as specified and directed
Sand filling/cushioning under floors or in foundations including watering and consolidation etc complete all as specified and directed
M&L for machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 Grade with grey cenent and pigment etc complete all as specified and directed
M&L for PCC type B1 1:2:4 ( 20 mm graded aggregate in kerbs or mud stops rounded or chamfered edges etc complete all as specified and directed
Removing excavated surplus soil to a distance not exeeding 50 m and depositing where directed at a level not exeeding 1.5 m above the starting point etc complete all as specified and directed
S&F Aluminum door/windows using power coated aluminum section, including necessary joining cleats,glazing clips, rubber neoprene packing, handles aluminum snap beading screws etc powder coating of any colour (thickness of powder coating minimum 50 micron ) complete all as specified and directed.
S&F Door closer hydralulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed using aluminium extruded section all as specified and directed..
S&F Brass Mortice lock of 4 Levers, vertical type, of size 100mm etc complete all as specified and directed
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (Overall length of cover plate 150mm) etc complete all as specified and directed
S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc complete all as specified and directed
S&F 18mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to fimber frame work etc complete all as specified and directed
M&L for sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 5.5 mm thick glass or all as specified and directed .
S & F 3mm thick coloured electrostatic conductive vinyl flooring optimal and constant static conductive property,antifungal,anti bacterial on levelled floors (using cementious self levelling compound using suitable adhesive,copper strip) and cord welding of joints including sealing of joints of wall and floor with sealing compound etc complete all as specified and directed
Excavating over areas, n exc 1.5 m deep and getting out in hard/ /dense soil etc complete all as specified and directed
Excavating over areas, exc 1.5 m deep but n exc 3.00 m deep and getting out in hard/ /dense soil etc complete all as specified and directed
Excavating over areas, exc 3 m deep but n exc 4.5 m deep and getting out in hard/ /dense soil etc complete all as specified and directed
M&L for Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed
M&L for rendering 15 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:4, finished even and smooth without using extra cement including mixing with WPC etc complete all as specified and directed Note: Water proofing compound will be measured and paid seperately)
Supply only Integral waterproofing compound
M & L for loose filling with graded bricks of gauge 40 mm to 80 mm in pits etc complete all as specified and directed
M&L precast cement concrete slabs /shelves/landing and similar articles with plain faces type B1 1:2:4 (20mm gaded aggregates)and set in CM 1:4 etc complete all as specified and directed
M & L for 150 mm reinforced pipes,class NP2 with one collar per length of pipe all as specified and directed
Cutting holes into or through brick or concrete block masonry walls built in cement mortar for fixing / inserting pipe depth of embeddedportion block exceeding one brick nut not exceeding two brick / block etc complete all as specified and directed
M&L for Point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including PVC casing-capping/concelad minimum 25 mm wide with all fittings and accessories such as bends, tees, joints etc. fixed to wall or ceiling with recessed, pressed steel terminal boxes not less than 1.6 mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly etc all as specified and directed
All as per ser item No. 37 here-in-before but for One fan point controlled by one way switch and regulator
All as per ser item No. 37 here-in-before but for one 5 Amps socket outlet on independent board.
All as per ser item No. 37 here-in-before but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
S&F switch piano, flush type, single pole, one way 5 Amp, 240 volt, white or ivory ISI marked complete all as specified
S&F for stepped type electronic fan regulator, 60 Watts, flush type 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm/1400 mm sweep all as directed
S&F switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 volts, white or ivory ISI marked complete all as specified
S&F switch socket combination 2 in 1, 5 pin, 5/15 Amps flush type, universal, 240 volts, white or ivory ISI marked complete all as specified
S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified
S&F sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed.
Supply and fixing sub main wiring with 2 runs of 6 sqmm single core, multi-stranded PVC insulated, unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, 20mm bore with conduit fittings and accessories concealed in wall/ceiling/floor including one run of 6 Sqmm multistranded PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Two runs of 6.0 sqmm copper cable and one run of 6.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
Supply and fix LED light fittings 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc complete all as specified and directed
Supply and install test and commissioning hi wall split type air conditioner units indoor / outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star raiting and EER 3.2 of capacity 1.5 TR etc complete all as specified and directed.
DJ GROUP
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .