SPECIAL REPAIR TO OTM ACCN IN BLDG NO P-6 IN 5/4 GR AT PALAMPUR MIL STN

Amount

SCHEDULE 'A' PART-I:- Demolition of cement concrete in ground floor and paving n.exc 15 cm thick bellow or above ground level all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed.

Taking down chowkhat with shutter with n.exc. 1.50 Sqm (without taking off shutters from the frame) and removing from site all as specified and directed.

Taking down chowkhat with shutter exc. 1.50 Sqm but n. exc 4 Sqm but with shutters (without taking off shutters from the frame) and removing from site all as specifed and directed.

Taking down shutter of any description exc 1 sqm n exc 2 sqm and removing from site all as specifed and directed.

S&F pressed steel frames size 125mm x 60mm for doors with one or more rebates including necessary fixing lung, hings, lock strike plate etc. complete all as specified.

S&F pressed steel frames size 105mm x 60mm for doors with one or more rebates including necessary fixing lung, hings, lock strike plate etc. complete all as specified.

M&L second class hard wood plain framed paneled shutter (factory made) of 35mm thick (two panel with lock rail & panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both sides) The size of rail & style as per IS-1003 (Part-I) kiln occasioned & chemically treated (thickness of shutter 35mm) complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutter open rebated prepared to receive glass gauge etc without sash bars for securing glass , gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed.

S&F steel window 1.25mm thick box type (Primer Coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged/glazed skelton shutter ERW sec 50mm x 20mm and 1mm thic with one or two openable leaf as directed consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including 10 mm square bar as in grill and coutting holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fitting welded to frame shutter. (i) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100mm long-1 No Per. Leaf. (iii) MS tower bolt 150mm long-2 No per leaf (iv) Z Sec 20mm x 25mm, 100mm long stopper-1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm weldeg to hinge-1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf. (vii) Fabrication & fixing arrangement as per drg No. CEPZ TD-06/07 Make :- (a) M/S Ram Fabrication Pvt Ltd, 223, Industrial Area Phase II, Panchkula Tele No. 2592599 (b) M/S Fonesta Building System, Cabin No 305, 3rd Floor SCO 60-62 Sector 17C, Chandigarh, Mobile No. 9876169990. (c) Steel man Industires Jalandhar, (d) Surjeetr steel Wks Pathankot, (e) Dhiman Engineering Wks Pkt, (f) M/S Mohinder fabricatiors Pkt, (g) Tee Pee Enterprises, Court Road Opp UCO Bank Amritsar Tele : 0183-5059597

S & F factory made single extruded WPC ( Wood Polymer composite) solid door/ window/ Ceosetory window & other frames/chowkhat of size 45x70 mm comprising of virgin pvc polymer of K value 58-60 ( Suspention Grade) calcium carbonate and natural bibres ( Wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed SS screw having minimum frame density of 750 Kg/Cum, Screw withdrawal streanth of 200 N ( face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire, retardand and fixed in position with MS hold fast/lungs/ss dash fasterners of required dia and length complete all as specified and directed.

S&F factory made single extruded WPC ( Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 ( suspention Grade), calcium carbonate and natural fibres ( wood power/ rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strenth of 1800 N ( face) & 900 N ( Edge), minimum compressive strenth 50 n/mm2 modulus of elasticity 850 n/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, complete all as specified and directed.

M&L for plain cement concrete M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

Dismantling floor, hearth or wall tiling incl cement morter bedding ( but not backing), removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for mat finish (non skid), Premium class I grade, joint free, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.

M&L for glazed coloured white tiles of size 450x300x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.

M&L for 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished even and rought to received the topping layer complete all as specified and directed.

M&L for polished machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for polished machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for makarana white marble tiles flooring 100 mm wide and 18-20 mm thick machine cut, over of 15 mm thick screed bed in CM 1:6, bedded jointed and pointed with grey cement slurry including cutting and polishing types, complete all as specified and directed. Note:- Pattern of marble strip shall be aprroved by Engr-in Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glass with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing not.exc 0.50 sqm each pane fixed in wood or steel frames with oil putty or wooden beads all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets n. exc 4 Kg complete all as specified and directed.

S&F mild steel wire cloth 0.56mm nominal dia of wire and any width of aperture 1.18 mm fiixed in wood or steel frame of any description complete all as specifed.

S&F butt hinges, extruded aluminium alloy with galvanised steel hinges, anodised and fixed, type b-21, 100 mm long complete all as specified and directed.

S&F aluminium handle, cast type, anodised 150mm long complete all as specified and directed.

S&F aluminium anodised barel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F in repairs 300mm long mild steel sliding door bolt, ordinary type stove enameled black with bright bolt n. less than 16mm dia with and included a minimum of 6 nut and bolts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F brass door spring 250-300mm ordinary rat tail rod pattern spring including roller and roller plate completecomplete all as specified and directed.

S&F in repairs drapery rod of 25mm dia powder coated decorative wooden finished drapery rod along with brackets and end caps of good quality complete all as specified as approved by GE.

Taking up or down 15mm bore dia steel water tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore dia steel water tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed.

Steel water tubing, 15mm bore dia, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed.

Steel water tubing, 20mm bore dia, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed.

All as per the description of serial item No 34 above but except 20mm bore pipe.

S&F GI spout pipe 40mm dia long medium grade incl making holes in walls & making good disturbed surfaces complete all as specified and directed.

S&F in repairs PVC valve less, crystal white, syphonic action type flushing cistern 10 litres capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, complete all as specified and directed.

S&F in repairs vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, complete all as specified and directed.

S&F in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device.

S&F CP Jet Spray Hygenic spray set ( health faucet) with 15mm dia 1 mtr long tube acrylic type complete all as specified and directed.

S&F plastic water closet seat, black or white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back, size 465mm x 355mm x 265mm white (minimum), including grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding ruinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing including 5 ltr automatic flushing cistern with bracket , flush pipe grating and union for discharge pipe complete all as specified and directed.

S&F in repair concealed type with wall flange, stop valves 15mm bore, cast copper alloy, fancy type cromium plated screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair wash basin, vitreous china glazed ware type of 550mm x 400mm oval type including waste fitting brass chromium plated screwed with fly nut and washer and 32mm dia PVC waste pipe complete all as specified.

S&F in repair pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'hot' or cold with long screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair bib taps 15mm bore, fancy type cromium plated with butterfly handle, screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions.including wall flange complete all as specified and directed.

S&F in repair brass cromium plated shower rose 125 mm size with swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F brass cromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

S&F PVC connections 15mm, 450mm long with PTMT nuts washers etc complete all as specified and directed.

Demolition of reinforcement cement concrete of any description complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stones agrgegate as in cover slabs, shelves and other similar work complete all as specified and directed.

S&F in repairs 20mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L for brick work with Subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified

Taking down cement plaster of any description and any thickness on brick/stone/concrete surfaces scrubbing down with water etc complete all as specifed and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick or concrete surfaces or other than fair faces of brick masonry, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with on bricks masonry or concrete surfaces or other than fair faces of brick masonry, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:4 on ceiling all as specified and directed finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over primer over and including one coat of wall care putty 2 to 3mm to get uniform smooth surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L two coats of plastic emulsion paint (exterior) over a coat of primer over and including one coat of wall care putty 2 to 3mm to get uniform smooth surfaces including preparation of newly plastered surfaces complete all as specified.

M&L for comlete removal of existing treatment of wall sufaces and applying two coats of plastic emulsion paint over a coat of primer over and including one coat of wall care putty 2 to 3mm to get uniform smooth surfaces all as specified and diarected.

M&L for complete removal of existing treatment of wall sufaces and applying two coats of oil bound distemper over primer over and including one coat of wall care putty 2 to 3mm to get uniform smooth surfaces all as specified and diarected.

M&L for preparation of new steel surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of old steel surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling of CI/PVC pipe 75/100mm bore fixed to wall or laid in floor or trenches inculding connection all as specified and directed.

S&F cast iron soil waste pipe (Sand cast pipes) 100mm bore single socketed, in any length with cement joint, fixed in wall including fixing stay clamp made out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof etc all as specified and directed.

S&F 100mm bore cast iron soil, waste and vent pipes (Sand cast pipes), in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore cast iron soil, waste and vent pipes (Sand cast pipes), in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F cast iron soil waste 75mm bore pipe (Sand cast pipes) single socketed, in any length with cement joint joints, fixed in wall including fixing stay clamp made out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed.

S&F 75mm bore dia bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm bore dia bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

M&L 100mm size cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete including taking down old unserviceable floor trap complete all as specified & directed.

S&F branch pieces (Double T) equal or unequal 100mm bore dia with access door complete all as specified and directed.

S&F branch pieces (Double T) equal or unequal 75mm bore dia with access door complete all as specified and directed.

S&F cast iron vent cowl 100mm bore dia complete all as specified and directed.

S&F cast iron vent cowl 75mm bore dia complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down existing water proofing treatment (if any) including cleaning with wire brushes roughening the surface and hacking out dirt, where directed and disposal of rubbish n.exc 50mm distance from the starting point complete all as specified and directed.

M&L for 15mm thick (average) screed bed/ plaster in cement mortar 1:4 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement, complete all as specified and directed. Note:- WPC and polymeric membrane shall be measured and paid separately.

M&L for applying a coat of bitumen primer conforming to IS: 3384-1986 over plastered surfaces @ 0.4 litres/ Sqm of density 0.87-0.89kg/litres at 25° C and viscosity 70-160CPS (Bitumen primer shall be of same make as of memebrane) including preparation of surfaces, complete all as specified and directed.

M&L for APP (Atactic Poly-propylene polymer) modified membranes, five layered, 3 mm thick weighing not less than 3.6 kg/ Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacture's instructions by authorised applicator only after applying evenly a coat of bitumen VG-10 grade @ 1.20 kg per sqm on the bottom of APP and on top of joints of APP complete all as specified.

Supply only liquid water proofing compound complete all as specified.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for plain cement concrete 75mm thick 1:3:6 type C-2, using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size conforming to IS15658-2006 of 60mm thickness M-35 complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

SCHEDULE 'A' PART-II:- Taking down old unserviceable copper/ aluminium point wiring concealed/batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down unserviceable sub main wiring of any size incl batten conduit earth wire etc and making good disturbed surfaces to match the existing surface complete all as specified.

Taking down unservecable TPN DB with MCB's of any make/capacity complete all as specified.

Taking down unservecable MCB DB SPN with MCB's of any make/capcity complete all as specified.

M&L for point wiring for one light/fan/call bell point controlled by one 6 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid conduit medium grade ISI marked including new CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note:- (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour.and Neutral wire shall be black colour. (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed.

All as per the description of serial item No 98 here-in-before but for one fan point/Exhaust fan controlled by one, one way switch and regulator complete all as specified.

All as per the description of serial item No 98 here-in-before but for 3 pin socket outlet 6 amp independent board complete all as specified.

All as per the description of serial item No 98 here-in-before but for 3 pin socket outlet 6 amp same board complete all as specified.

All as per the description of serial item No 98 here-in-before but for one light point controlled by 2 way switch complete all as specified

All as per the description of serial item No 98 here-in-before but for 3 pin socket outlet 16 amp independent board with cable of size 2.5 sqmm in point wiring and 2.5 sqmm in contionous earth wire complete all as specified.

S&F switch piano flush type single pole one way 6 amp complete all as specified.

S&F switch piano flush type single pole two way 6 amp complete all as specified.

S&F socket outlet 3 pin 5 Amp flush type complete all as specified.

S&F switch piano flush type single pole one way 16 amp complete all as specified.

S&F socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet all as specified .

S&F ceiling rose surface type PVC polycarbonate isolated body 3 terminal complete complete all as specified.

Supply & fixing surface /wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. MAKE:- Cat Part No for batten:- STREAKT8UPTO 1X22WSSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved .Cat Part No for Tubelight:- PHOTANULTRAE2.0 1213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LEDtube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved

Supply and fix Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified

Supply and fix LED lamp 10 W complete all as specified.

Supply and fixing LED street light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F street light bracket made out of 32 mm dia GI light grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 40 x 5 iron strip and nut bolts and washers, complete all as specified and directed.

Taking down old unserviceable light fittings/ bulk head fittings/security light of any type and model complete and making good the disturbed surface complete all as specified and directed.

M&L for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. NOTE:-Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note:- Wiring shall be done in proper colour coding.

Supply and fix distribution board iron clad vertical DB double door with IP-43 protection suitable for MCCB as incomer and MCB as outing 415 V 3 Phase 50 HZ 4 Way complete with appropriate size of copper busbar and neutral link complete with one MCCB 3 pole 415 V 125 Amp rating with reputing capacity 25 KA of the same make as of DB and incl cutting chasing to wall for fixiing DB and making good the disturbed wall to match with existing surface complete all as specified. distribution board and MCB shall be same make

S&F MCB distribution board sheet steel powder coated SPN 12 way double door IP-42 protection with 200 Amp rated busbar 240 Volt complete all as specified.

S&F MCB SPN 63 Amps 230 volts 'C' series complete all as specified.

S&F MCB SPN 40 Amps 10 KA 230 volts 'C' series complete all as specified.

S&F MCB SP 6 to 40 Amps 10 KA 230 volts "C" series complete all as specified.

M&L for earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level ,connected to galvanised earth lead wire 4.0mm by means of bolts, nuts, check nuts, washer including test point by means of bolts, nuts, check nuts, and washers of galvanized iron and connected to main switch / control board up to 7.5 metre away from earth electrode and including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thick with 8mm dia TMT bars at 140mm C/C both ways, with lifting handle, watering pipe of GI medium grade 40mm dia, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified.

Disconnecting/Taking down and Painting with enamel paint by spraying including filling cavities with filler ,one coat after cleaning all dust then refixing in servicible condition of exhaust fan any type/ any sweep incl making the connection and testing complete all as specified.

Disconnecting/Taking down and Painting with enamel paint by spraying including filling cavities with filler ,one coat after cleaning all dust then refixing in servicible condition of ceiling fan any type/ any sweep including making the connection and testing complete all as specified.

Taking down unservicible U/G cable after disconnecting from pole and Supply & laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and directed.

Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

M&L for sand cushioning to under ground cable with a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.

M&L for sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed.

Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed.

BHARDWAJ BUILDERS

M/s Sai Construction

M/S PARVEEN ENTERPRISES

M/s R S Construction

m/S Varun Gupta

MM Constructions

M/S ASHWANI KUMAR AND COMPANY