Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.5 LAccepted-AOC | ₹5.5 L | 1 | Accepted-AOC being L1 |
| 2 | 2₹6.2 L+₹71,980 (13.1%)Rejected-Finance | ₹6.2 L+₹71,980 (13.1%) | 2 | Rejected-Finance L2 |
| 3 | 2₹6.5 L+₹1.0 L (18.9%)Rejected-Finance | ₹6.5 L+₹1.0 L (18.9%) | 2 | Rejected-Finance L2 |
| 4 | 4₹7.6 L+₹2.2 L (39.3%)Rejected-Finance | ₹7.6 L+₹2.2 L (39.3%) | 4 | Rejected-Finance L4 |
| 5 | 5₹8.6 L+₹3.1 L (55.9%)Rejected-Finance | ₹8.6 L+₹3.1 L (55.9%) | 5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | Shiv Drillers L4 | M/S Ishan Thakur L3 | Jagjeet Singh L1 | mamta devi L5 | Rajinder Kumar Thakur L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck mounted DTH and ODEX / Percussion Calyx/RC driling rigs along with necessary accessories etc. to the site of work and erection of rig including levelling etc. complete in all respect as per direction of the Engineer-in-charge. | 1 | Each | 5,000 ₹5,000 | 3,000 ₹3,000 | 4,000 ₹4,000 | 2,000 ₹2,000 Lowest | 2,800 ₹2,800 |
| 2.00 | Drilling bore of 200 mm dia as per IS: 2800-1979 using ODEX (TUBES attachment required driling in collapsible strata conglomerate, boulders, pebbles, gravels, silt clay, etc. inclduing cost of attachments, consumable stores, bits, water, POL etc.complete with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fin-cut casing pipe which will be welded together using 2.5mm or 3.25mm dia. Advani overlinkon electrodes, with one plain end and the other end champbered to 50 degrees removing paint on the area to be welded , inclusive of the cost of bio-degradable and non-toxic foam flush etc.complete in all respect and to the entire satisfaction of the Engineer-in-charge. | 100 | Mtr | 4,990 ₹4,99,000 | 4,000 ₹4,00,000 | 3,500 ₹3,50,000 Lowest | 4,500 ₹4,50,000 | 4,000 ₹4,00,000 |
| 3.00 | Providing and lowering IS marked 175 mm dia NB 6.4mm thick fincut MSERW casing pipes as per IS: 4270-2001 in a radnom length of 4 to 7 meters with circumferential butt welded joint upto the bore hole in vertical postion including cost of scafolding, derricks and to the entire satisfaction of the Engineer-in-carge including cost of cutting threading and welding of pipe when required and requirement of ODEX attachment from approved manufactures complete in all respect and to the entire satisfaction of the Engineer-in-charge. | 88 | Mtr | 2,490 ₹2,19,120 | 2,500 ₹2,20,000 | 1,800 ₹1,58,400 Lowest | 4,200 ₹3,69,600 | 2,000 ₹1,76,000 |
| 4.00 | Providing and fixing suitable casing shoe 175mm dia and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-charge. | 1 | Each | 7,000 ₹7,000 | 3,000 ₹3,000 | 4,000 ₹4,000 | 2,500 ₹2,500 Lowest | 5,000 ₹5,000 |
| 5.00 | Collection and preservation of soil samples in polythene bags complete in all respects as per direction of the Engineer-in-charge. | 1 | Each | 30 ₹30 Lowest | 30 ₹30 Lowest | 50 ₹50 | 30 ₹30 Lowest | 30 ₹30 Lowest |
| 6.00 | Providing slotting arrangements as per IS: 8110/1994-997 slot size 1.5x75mm and Lowering of 175mm dia MS sloted pipe as per IS: 4270-2001 with upto date amendments welded and joints in to bore hole in vertical position including cost of all cutting threading and welding of pipe etc. with in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge. | 12 | Rmt | 2,500 ₹30,000 | 2,000 ₹24,000 | 1,750 ₹21,000 Lowest | 2,500 ₹30,000 | 2,050 ₹24,600 |
| 7.00 | Development of bore well with 1000 CFM air compressor or thorugh V notch as per IS: 2800-1979 including transportation of equipments etc. to the site of work complete in all respect and to the entire satisfaction of the Engineer-in-charge. | 1 | Job | 4,000 ₹4,000 | 2,000 ₹2,000 | 11,000 ₹11,000 | 1,000 ₹1,000 Lowest | 12,000 ₹12,000 |
Tender Value
₹7.1 L
EMD Value
₹14,200
Closing Date
14 Jul 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Bilaspur
Providing water facility to Luhnoo Ward No.1 under New Bilaspur Town in Tehsil Sadar District Bilaspur (SH Providing and installation of 200mm dia Bore well Nr. Balmiki Basti Culvert).
2025_HPIPH_109207_1
BLP-BLP-0736-NIT No. 3600-3699 Dated 01/07/2025
Open Tender
Civil Works
Item Rate
60 days
Sub-Division Bilaspur Section NBT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
EE JSV Division Bilaspur
₹14,200
22 Jun 2026
3 Jul 2025
14 Jul 2025
3 Jul 2025
14 Jul 2025
3 Jul 2025
Amount
Transportation of suitable truck mounted DTH and ODEX / Percussion Calyx/RC driling rigs along with necessary accessories etc. to the site of work and erection of rig including levelling etc. complete in all respect as per direction of the Engineer-in-charge.
Drilling bore of 200 mm dia as per IS: 2800-1979 using ODEX (TUBES attachment required driling in collapsible strata conglomerate, boulders, pebbles, gravels, silt clay, etc. inclduing cost of attachments, consumable stores, bits, water, POL etc.complete with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fin-cut casing pipe which will be welded together using 2.5mm or 3.25mm dia. Advani overlinkon electrodes, with one plain end and the other end champbered to 50 degrees removing paint on the area to be welded , inclusive of the cost of bio-degradable and non-toxic foam flush etc.complete in all respect and to the entire satisfaction of the Engineer-in-charge.
Providing and lowering IS marked 175 mm dia NB 6.4mm thick fincut MSERW casing pipes as per IS: 4270-2001 in a radnom length of 4 to 7 meters with circumferential butt welded joint upto the bore hole in vertical postion including cost of scafolding, derricks and to the entire satisfaction of the Engineer-in-carge including cost of cutting threading and welding of pipe when required and requirement of ODEX attachment from approved manufactures complete in all respect and to the entire satisfaction of the Engineer-in-charge.
Providing and fixing suitable casing shoe 175mm dia and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-charge.
Collection and preservation of soil samples in polythene bags complete in all respects as per direction of the Engineer-in-charge.
Providing slotting arrangements as per IS: 8110/1994-997 slot size 1.5x75mm and Lowering of 175mm dia MS sloted pipe as per IS: 4270-2001 with upto date amendments welded and joints in to bore hole in vertical position including cost of all cutting threading and welding of pipe etc. with in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge.
Development of bore well with 1000 CFM air compressor or thorugh V notch as per IS: 2800-1979 including transportation of equipments etc. to the site of work complete in all respect and to the entire satisfaction of the Engineer-in-charge.
Rajinder Kumar Thakur (BID ID -533917)
M/S Ishan Thakur (BID ID -534346)
Shiv Drillers (BID ID -534055)
mamta devi (BID ID -534298)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .