Repairing and Renovation in ITI Building A, B, D at Zankhvav, Dist.Surat. (Strengthening, Door & Window, Toilet Repairing, Drainage, Sanitary, Plaster and Colour work and other Misc. works etc.)

Name of work :- Repairing and Renovation in ITI Building A, B, D at Zankhvav, Dist.Surat.

(Strengthening, Door & Window, Toilet Repairing, Drainage, Sanitary, Plaster and Colour work and

other Misc. works etc.)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item (with brief specification and reference to book of Rate In

Quantity Unit Amount

No. specifications) figures

1 Excavation for foundation up to1.5 m depth including sorting out and 24.00 Cumt 122.94

stacking of useful materials and disposing off the excavated stuff up to

Meter lead. (A) Loose or soft soil.

2 Filling available excavated Earth (Excluding Rock) in trench plinth side 17.00 Cumt 136.92

of foundation in layer not excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

3 Dismentaling of tiled stone floors laid in mortar including stacking of 160.00 Sqmt 50.62

serviceable materials and disposal of unserviceable materials with all lead

4 Demolition and disposal of unserviceable materials with all lead and lift. 164.50 cumt 639.72

(i) cement concrete.

5 Providing and laying cement concrete 1:2:4 (1-cement: 2-coarse sand: 4- 3.00 cumt 3741.69

garde stone aggregate 20mm nomial size) and curing complete excluding

cost of formwork in (A) Foundation and plinth.

6 Providing and laying polished kota stone slab flooring over 20mm 24.00 Sqmt 1080.68

(Average) thick base of cement mortar 1:6 (1-Cement : 6 coarse sand) or

L.M. 1:1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

gray cement slurry including rubbing and polished etc. complete (A)

7 Demolition of brick work and stone masonary including stacking of 5.50 Cumt 577.92

servicable materials and disposal of unserviceable materials with all lead

and lift (ii) In Cement Mortar.

8 Brick work using common burnt clay building bricks crushing strength 5.50 Cumt 4503.04

not less than 35 Kg / Sq.cm. in super structure above plinth level upto

floor two level in cement mortar 1:6 (1cement : 6 fine sand) (B)

Conventional For Ground Floor.

9 Providing and Laying Jacketing to R.C.C. member with jacketing of 0.1m 4.00 Cumt 7221.50

thick and 1:1:2 concrete with, polypropelene fibre and super plastisizer

with shuttering, curing with all materials and labour also in 12mm

Polypropelene Fabrillated Fibre 125 gm / 50 kg bag of cement + Super

Plastisizer 250 gm / 50 kg bag of cement). including cleaning all corrode

steel bar with mild nitric acid and applying zinc rich primer on steel bar

etc. comp. for all floors.

10 Providing and laying Cement Concrete 1:1:2 in Pad footing with all 7.00 Cumt 5477.23

labour and all material required like sand, cement, coarse aggregate,

polymer fibre 125gm / 50 kg bag of cement and super plasticizer 250gm /

50 kg bag of cement including formwork and curing etc. comp. as

directed by engineer in charge.

11 Removing and scraping of old deteriorated plaster of any thickness 1450.00 Sqmt 20.55

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift.

Item Description of Item (with brief specification and reference to book of Rate In

Quantity Unit Amount

No. specifications) figures

12 Providing average 20 mm thick single coat polymer plaster by removing 498.00 Sqmt 461.57

detoriated plaster over RCC member, like column, beam, slab etc.

exposing existing reinforcement including scraping by wire brush,

applying rust removing chemical, rust convertor and zinc rich primer on

existing reinforcement, applying polymer bonding agent on existing

concrete surface including plastering in CM 1: 3 in single coat including

standard quality (Dr. fixit or any equivalent brand) curing compound

agent and finishing with floating coat of neat cement slurry adding

Polyalk Fix Prime polymer chemical as per directed by Engineer - in -

charge for all floors.

13 Providing 15mm thick cement plaster in single coat on rough (similar) 772.00 Sqmt 211.82

side of single or half brick walls for interior plastering upto floor two

level and finished even and smooth in (ii) Cement mortar 1:4 (cement-1 :

4-sand and Extra over items for finishing with a floating coat of cement

14 20 mm Thick sand faced Gutka cement plaster on walls for all height 180.00 Sqmt 315.69

above ground level consisting of 12 mm Thick backing coat of c.m. 1:3 (1

cement : 3 sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement :

sand) with 1x1cm Groves at juction of structure member etc. complete.all

15 12mm Rebar, excluding bar. It should minimum 120mm embedded in 48.00 Nos. 289.87

concrete, drill dia. Should be minimum 20mm for rebar, material should

be used Will Fischer FISV 360 or equievalent. (Pull out strength check

should be given by contractor as per technical specifications.

16 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 1700.00 Kgs. 77.29

bending, binding and placing in position complete up to All floor Level.

17 Removing, Repairing and Refixing existing Alluminium window frame 40.00 Nos. 696.90

with glass of all size shutter / frame, replacing all old fixtures with new

locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

window, all materials, transport cost, taxes etc.and as directed by

engineer in charge etc. complete.

18 Removing, Repairing and Refixing Old existing wooden door shutter 25.00 Nos. 1883.65

including repairing the shutter / frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 2 Aldrop, 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

19 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 160.00 Rmt 834.38

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

Item Description of Item (with brief specification and reference to book of Rate In

Quantity Unit Amount

No. specifications) figures

20 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 64.00 Rmt 878.57

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

21 Providing, laying and jointing in true line and level 75 mm dia. UPVC 64.00 Rmt 740.33

SWR Type B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp at every 2000 mm c/c or shall be conceled in walss

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

22 Wall painting (Two coats) with plastic emulsion paint of approved brand 3721.00 Sqmt 84.37

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

23 Wall painting (Two coats) with plastic emulsion paint of approved brand 1859.50 Sqmt 90.05

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

24 Painting two coats (excluding priming coat) on previously painted wood 110.50 Sqmt 98.21

and wood based surface with enamel paint to give an even shade

including cleaning the of all dirt, dust and other foreign matter for every

subsequent coat of paint.

25 Painting two coats (excluding priming coat) on previously painted steel 242.00 Sqmt 99.57

and other metal surface with enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter

for every subsequent coat of paint.

26 Wall Painting (Two coats) with weather proof acraylic emulsion (Apex or 761.50 Sqmt 120.26

equivalent type) paint of approved brand and manufacture and of required

shade on exterior wall surface to give an even shade over and including

primery coat with Alkaly resistance primer of approved brand after

thoroughly brushing surface to remove all dust and remains of loose

powdered material etc. comp. for all height.

Item Description of Item (with brief specification and reference to book of Rate In

Quantity Unit Amount

No. specifications) figures

27 Providing and laying water proofing treatment by conventional method 1621.50 Sqmt 950.41

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

uniformly on first layer of mortar including applying cement slurry @ rate

of 0.08 bag / sqm. on fixed layer of brick bats including maintaining

necessary slope, in second layer 40 mm thick C.M 1:4 mixed with water

proofing compound as directed, including finishing smooth with cement

slurry as directed complete.

28 Providing and laying water proofing treatment with broken chine mosaic 1621.50 Sqmt 779.70

flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the wall,

clearing with water and oxalic acid etc. as directed.

29 P & L 30x30 cm. matt finished ANTI SKID Cemamic Tiles 6 mm thick 33.50 Sqmt 1090.32

tile flooring over 10 mm (average) base of cement mortar 1:3 (1 cement:

3 coarse sand) and jointed with color cement slurry mixed with pigment

to match the shade of slab including finised with flush pointing &

cleaning the surface for antiskid mat finised etc. complete. Colours Shade

approved by Engineer-In-Charge.

30 P & L Premium Printed Glazed tiles size 30 x 45 cm 6 mm thick in 102.50 Sqmt 1513.28

skirting risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement: 3 coarse sand) and jointed with colour cement slurry.

31 Dismantling santtary fittings like wash basin, W.C. pan Indian and 10.00 Nos. 425.93

European type, flushing tank etc. including stacking the materials with all

32 Dismentling C.I. pipes G.S.W.pipes and A.C. rain water pipes with 378.00 Rmt 78.84

fittings and clamps including stacking the materials with all lead and lift

(for any dia of pipe).

33 Providing erecting and fixing double coated (ISI) water tank of required 15000.00 Lit. 3.95

capacity each with all necessary fittings and connection etc. complete on

34 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 15.00 Rmt 195.67

Pipe (SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

35 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 25.00 Rmt 148.12

Pipe (SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Description of Item (with brief specification and reference to book of Rate In

Quantity Unit Amount

No. specifications) figures

36 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 25.00 Rmt 91.84

Pipe (SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

37 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 25.00 Rmt 72.65

Pipe (SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

38 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 5.00 Nos. 599.64

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

39 Provision and fixing water closet squatting orissa type W.C. pan size 7.00 Nos. 1625.09

580mm integral footrest and 100 mm P or S trap and in cluding 25 mm

dia CP brass flush valve and GI inlet connection etc. comp. (A) Vitreous

china long pattern white or colour.

40 Providing and fixing brass screw down stop tap. (A) 15mm dia. 5.00 Nos. 205.83

41 Providing and fixing ball cock of approved. quality as directed. (A) 1.00 No. 189.84

Copper Metal (ii) 50mm dia.

42 Providing and fixing washbasin with single hole for pillar tap with C.I. or 3.00 Nos. 1583.44

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings. (A) Vitreous China: (ii) Flat Back washbasin

550 mm x v 400mm size. (i) In white colour.

43 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm 3.00 Nos. 67.91

44 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm 3.00 Nos. 78.75

45 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 3.00 Nos. 859.41

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

46 Providing and fixing C.P. brass towel rail comlete with C.P. brass 3.00 Nos. 616.42

brackets fixed to wooden plugs with C.P. brass scews (B) 600mm x

47 Providing and fixing screw down bib taps of following size. (A) Brass 10.00 Nos. 186.83

screw down bib tap polished bright. (i) 15mm dia.

48 Providing and fixing pillar tap, capstan head, screw down high pressure 5.00 Nos. 308.73

with screws, shanks and back nuts. (i) 15mm dia.

49 Dismentaling of sheet roofing including ridges, Hips,Valleys, Gutters etc. 367.00 Sqmt 50.62

stacking of serviceable materilas and disposal of unserviceable materials

with all lead and lift. (i) G.I.sheet roofing.

Item Description of Item (with brief specification and reference to book of Rate In

Quantity Unit Amount

No. specifications) figures

50 Providing and fixing of Ridge flashing for roof panel shall be made out of 367.00 Sqmt 867.39

0.5 mm thick pre coated GI sheet. The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992, 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during transportation. The ridge

shall be fixed to the steel members by pop rivet or self drilling / self

stitching fastners @ maximum 450 mm c/c along length of capping /

flashing etc. complete.

(Rupees Fifty-two Lakhs Sixty-two Thousand Eight Hundred Fifty-six and Paise Sixteen Only.)

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 5262856.16 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Credit Value of Dismentalled Materials of Amount `.21,148.00 (Rupees Twenty-one Thousand One Hundred Forty-

eight Only) shall be recovered from the 1st Running Bill.

2 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 GST and Income tax TDS will be deducted at a source while making payments of bills

5 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

6 GST will be paid extra as per Govt. amendment.

Signature of contractor Deputy Executive Engineer

Mandvi (R & B) Sub Division,

Executive Engineer

Surat (R&B) Division No.2,