Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹18.9 L+₹2.7 L (16.9%)Rejected-Finance R O VILLAGE SAGNAHER P O CHAUNTRA TEHSIL JOGINDER NAGAR DISTT MANDI H P | L2 | Rejected-Finance L2 | |
| 3 | L3₹22.1 L+₹5.9 L (36.7%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹23.1 L+₹6.9 L (42.5%)Rejected-Finance P O SATOG TEHSIL THEOG DISTT SHIMLA | SHIMLA | SHIMLA | HIMACHAL PRADESH | L4 | Rejected-Finance L4 |
Tender Value
Refer Docs
EMD Value
₹33,290
Closing Date
16 Mar 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER
JAL SHAKTI DIVISION DHARAMSHALA
Construction of Over Head Tank 75000 Litres Capacity 12 Mts. Stagging Height at Node No. 6
2023_HPIPH_70467_1
NO. EE/JSD/Ten/2023-23462-23561
Open Tender
Civil Works
Item Rate
180 days
DHARAMSHALA
Please refer Tender documents.
6 documents required · 6 mandatory
₹400
EE JSD
₹33,290
Yes
16 Mar 2023
9 Mar 2023
16 Mar 2023
9 Mar 2023
16 Mar 2023
10 Mar 2023
9 Mar 2023 - 10 Mar 2023
Amount
Excavation in foundation,trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting hard of soft rock by chiselling where the blasting work is prohibited slushy daldal and saturated soil including pumping or bailing out water within all heights, stacking the excacated soil within all leads clear from the edge of excavation and then returning the stacked soil in 150 mm (fifteen centimetres) layer when required into plinths, sides of foundation consolidating each deposited layer by remming and watering and then disposing of all surplus excavated earth as per the direction of Engineer-in-Charge with in all leads and lifts.
Providing and Laying Cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth complete in all respect including all leads and lifts.
Providing and Laying cement concrete work 1:1/12:3(1cement:1/12 sand: 3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work:-In foundation and plinth complete in all respect.
Walls any thickness (but not less then 0.10 mm thickness) including attached pillasters, plinth and string crusers etc. top of foundation upto Floor 6 Level complete in all respect including all leads and lifts.
Column pillars posts and struts complete in all respect.Upto Floor 2 Level (upto 6 meters above ground level).
Upto Floor 2 to 3 Level (6 to 9 meters above ground level).
Upto Floor 3 to 4 Level (9 & above ground level).
Suspended Floors, roofts landing and shelves and their support balconies beams girders bressumers and cantilevers.Upto Floor 2 Level (upto 3 meters above ground level).
Upto Floor 2 to 3 Level (3 mtrs. to 6 meters above ground level).
Upto Floor 3 to 4 Level (6 mtrs. to 9 meters above ground level).
Upto Floor 4 to 5 Level (9 metrs. to 12 meters above ground level).
Upto Floor 5 to 6 Level (12 metrs. to 15 meters above ground level).
Providing mild steel/tor steel (reinforcement for RCC work) including bending, binding and placing in position complete in all respect including all leads and lifts.
Providing form work with steel plates 315 mm thick welded with angles iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering, shuttering strutting and propping etc. with wooden bottens and ballies, height of propping etc. and centering below supporting floor to ceiling not exceedin 4 meters and removal of the same for in-situ reinforced concrete and plain concrete work in:- Foundation,footing,bases of columns and mass concrete
Vertical surfaces such as walls (only thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like complete in all respect including all leads and lifts.
Flat surfaces such as soffits of suspended floor, roofs, landing and the like complete in all respect including all leads and lifts.
Beams,cantilevers,girders & lintels etc.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtrs. In depth in all heights from floor complete in all respect including all leads and lifts.
Column pillars, posts and struts circular or curved in plan complete in all respect including all leads and lifts.
Stair cases with slopping or stepped soffits
Edges of slab and breaks in floor and walls under 20cm wide
Providing form work of ordinary timber planking so as to give a rough finish including centring, shuttering and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in-situ-reinforced concrete and plain concrete work in: Arches up to 6 mtr span complete in all respect with in all leads and lifts.
Extra for every additional height of proping and centring upto a height of 7 mtrs. excluding bricks/stones/C.C. pillars for supports complete in all respect including all leads and lifts i.e. form 7 to 14 mtrs. Above.
Extra for every additional height of proping and centring upto a height of 7 mtrs. excluding bricks/stones/C.C. pillars for supports complete in all respect including all leads and lifts i.e. form 14 mtrs. Above.
Providing steel work welded in built upto sections bruses and framed work including cutting, hosting fixing in position and applying a priming coat of red lead paint in gratings framed quard bars, ladders, railling brackets and similar works in all respect including all leads and lifts
Providing & fixing M.S manhole cover with frame having size 600x600mm with M.S angle frame size 40x40x6mm with M.S sheet having size 3.15mm thick i/c locking arrangement with M.S flat of size of 40x6mm thick one hinges on one side and other side locking arrangement complete in all respect with in all lead and lifts.
Providing and fixing M.S mosqiuto proof ventilator 400x300mm in height with frame of MS angle iron 40x40x6mm complete in all respect with in all leads and lifts.
Providing and fixing of sluice valve kirloskar /kartar make (Class PN-I.6) as per BIS 786-1984 with hand wheel of approved made complete in all respect including all leads and lifts.65mm dia
Providing and fixing lighting conductor completein all respect including in all leads and lifts.
Providing and fixing water level quard indicator complete with in all leads and lifts.
Laying, jointing & testing GMS pipe of following class conforming to IS: 1239-1990. The pipe shall be jointed with flanges of following class. The flanges shall conform to IS: 6392-1971. The MS flanges shall be fixed with pipes by welding as per 814-1967. It should be done on both faces to make the joint leak proof and capable to with stand the required hydraulic pressure including specified number and size of MS nuts and bolts as per tables mentioned below and asbestos fibre jointing gasket not less than 3mm thick conforming to IS: 2712-1965. The laying of pipes should conform to IS:5822- 1994 ( earth work in trenches to be mesured and paid for seperately) 65mm dia ( Table - 5)
Applying priming coat over new steel & other metal surface surface after and including preparing the surface by thoroughly cleaning oil, grease , dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete.
Painting two coats(excluding priming coat)on new Steel and other metal surface with ready mixed paint brushing to give an even shade including cleaning of all dirts,dust and other forign matter sand papering and knotting complete with ready mixed mixed paint other thatn white within all leads and lifts.
Finishing walls with water proofing cement paint of approved brand and manufacture of required shade on undecorated wall surface ( two coats) to give an even shadeafter throughly brushing the surface to remove all dirt and remains of loose prepared material within all leads & lifts.
Extra cost for providing and mixing polyester triangular synthetic fibrec in spoecified ration 6-18mm length designed for melting point 240-260 degree centigrade and having specific gravity of 1.33-140 as per IS 456 ammendment August 2007 and IRC 44-2008 @ rate of 125 grams per 50 kg. of cement beg in all types of CC, RCC, plastering and flooring work ect.
Provision for bearing capacity of soil complete in all respect.
Provision for Drawing and design complete in all respct.
PARDEEP KUMAR
PANKAJ MANDHOTRA
SANTOSH KUMAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .