08/EWC(B)/2023-24

Amount

Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

PCC 9 Mtr. long

Cross Arm Channel 100x50mm V type

33 KV Pin insulator

33 KV Pin with nut

Disc insulator B&S type 7000 kg.

Disc fitting Dog/raccon 7000kg.

ACSR dog conductor

G.I. Wire 8 SWG

M.S. Earthing rod of 20x2500mm & 6swg. Earthing wire

Top Channel 125x65x6mm

M.S. Angle 65x65x6mm

Stay set complete

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts, washer would be provided by contractor.

Single support of PCC Pole 9mtr long.

Double pole structure on PCC Pole 9.0 mtr long complete with bracing.

Tri pole structure on PCC Pole 9.0 mtr long complete with bracing.

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete etc would be provided by contractor.

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor of shifted 33KVline including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Fixing of danger board on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.

Safe dismentling of old & rotten ACSR Raccon conductor of existing 33 KV Bhadsara Udra line Near Bhooda Village without damage of any insulator, cross arm, clamp etc. of existing 33 KV line.

Loading. unloading and safe carrige of old & Used conductor (almost 2.5 ckt km.) from site to Store center, Pilibhit (Distance upto Approx 50 km).

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

M/S HINA ELECTRICALS