Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC | ₹11.5 L | L1 | Accepted-AOC found lowest bidder |
| 2 | L2₹12.3 L+₹82,517 (7.17%)Accepted-AOC | ₹12.3 L+₹82,517 (7.17%) | L2 | Accepted-AOC found second lowest bidder |
| Sl No | Description | Qty | Unit | HARIS T A L2 | PRADEEP KUMAR.V.K L1 |
|---|---|---|---|---|---|
| 1.00Electrification | |||||
| 1.00 | 90.15.4.4:Supply Conveyance, installation, testing and commissioning of 100W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | 36 | each | 9,000 ₹3,24,000 | 8,310 ₹2,99,160 Lowest |
| 1.00 | OD310903/2024-2025:Supply installation testing commissioning of Decorative Pole 3 meter height above the ground level made out of GI, tubular pole & lsquo; T& rsquo; washed and premi & egrave;red (ASTM A123) having two section section, bottom section of minimum 1000mm with base dia of 114mm and upper section of minimum 2000mm with dia of 76mm. The pole shaft shall be as per IS 1161.The pole shall have castiron embellishments. The pole shall have base plate of dimension 200x200x12mm. The pole shall be with inbuilt junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out and with MS base plate. The pole shall be suitable for wind loadings as per IS 875 part 3 1987. Design comply EN40 standard and basic wind speed 169kmph.Pole should hot dip galvanized to 65 microns to IS 2629:985/ IS 4759:1996 / IS 2633:1986. The Pole should be given with two coats of epoxy primer and above that it should be given with polyurethane UV resistant coating (painted with avg. DFT of 70μm). The complete system should be hot dipped Galvanised. ( Kesslec 3M Decorative RILA Pole GI with base plate/Crompton Trossa/bajaj jordhan | 12 | each | 14,275 ₹1,71,300 | 13,362 ₹1,60,344 Lowest |
| 1.00 | OD310905/2024-2025:SITC of LED Decorative Classic luminaire of system wattage 40W, BIS certified with a body and frame of high pressure die cast aluminium, a frosted PMMA protector (IK06) fixed on to the optical unit, separate optical and control gear compartment accessed by opening four screws at the top of the luminaire, a vent pressure equalization unit and pre-cabled as required. The luminaire shall have ingress protection of IP66. Highly efficient temperature
resistant lenses for light distribution with several optical options providing excellent
photometry to optimally cater to different applications. Overall system efficiency of
110lm/W at correlated colour temperature (CCT) 3000K, colour rendering index (CRI) >70
and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power
Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4 kV and
an additional surge protection device (SPD) of 10 kV. ( KESSLEC RILA 40W WW
LED/equivalent) | 12 | each | 14,531 ₹1,74,372 | 13,601 ₹1,63,212 Lowest |
| 1.00 | 90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm | 1,000 | metre | 208 ₹2,08,000 | 195 ₹1,95,000 Lowest |
| 1.00 | 9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.4 X 10 sq. mm (25mm) | 66 | set | 255 ₹16,830 | 239 ₹15,774 Lowest |
| 1.01 | 90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size | 650 | metre | 143 ₹92,950 | 134 ₹87,100 Lowest |
| 1.01 | 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps | 100 | metre | 493 ₹49,300 | 461 ₹46,100 Lowest |
| 1.01 | 90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm | 276 | metre | 82 ₹22,632 | 77 ₹21,252 Lowest |
| 1.01 | OD308951/2024-2025:Supply and fixing junction box of size 250*250*160 of Syntax type suitable for providing DP MCB and termination of Street light cable (GSJB2525) | 29 | each | 1,474 ₹42,746 | 1,380 ₹40,020 Lowest |
Tender Value
₹12.7 L
EMD Value
₹31,773
Closing Date
2 Jun 2025, 6:00 pmClosed
AEE PWD Electrical Kasaragod
O/o AEE PWD Electrical Sub Division Kasaragod
Electrification
2025_PWD_764407_2
PWD/BLDG/TR/6271/2025_6_1_1/1
Open Tender
Electrical Works
Item Wise
120 days
Kasaragod
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,760
₹31,773
3 Sept 2025
26 May 2025
5 Jun 2025
26 May 2025
2 Jun 2025
26 May 2025
Amount
Electrification
90.15.4.4:Supply Conveyance, installation, testing and commissioning of 100W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
OD310903/2024-2025:Supply installation testing commissioning of Decorative Pole 3 meter height above the ground level made out of GI, tubular pole & lsquo; T& rsquo; washed and premi & egrave;red (ASTM A123) having two section section, bottom section of minimum 1000mm with base dia of 114mm and upper section of minimum 2000mm with dia of 76mm. The pole shaft shall be as per IS 1161.The pole shall have castiron embellishments. The pole shall have base plate of dimension 200x200x12mm. The pole shall be with inbuilt junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out and with MS base plate. The pole shall be suitable for wind loadings as per IS 875 part 3 1987. Design comply EN40 standard and basic wind speed 169kmph.Pole should hot dip galvanized to 65 microns to IS 2629:985/ IS 4759:1996 / IS 2633:1986. The Pole should be given with two coats of epoxy primer and above that it should be given with polyurethane UV resistant coating (painted with avg. DFT of 70μm). The complete system should be hot dipped Galvanised. ( Kesslec 3M Decorative RILA Pole GI with base plate/Crompton Trossa/bajaj jordhan
OD310905/2024-2025:SITC of LED Decorative Classic luminaire of system wattage 40W, BIS certified with a body and frame of high pressure die cast aluminium, a frosted PMMA protector (IK06) fixed on to the optical unit, separate optical and control gear compartment accessed by opening four screws at the top of the luminaire, a vent pressure equalization unit and pre-cabled as required. The luminaire shall have ingress protection of IP66. Highly efficient temperature resistant lenses for light distribution with several optical options providing excellent photometry to optimally cater to different applications. Overall system efficiency of 110lm/W at correlated colour temperature (CCT) 3000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4 kV and an additional surge protection device (SPD) of 10 kV. ( KESSLEC RILA 40W WW LED/equivalent)
90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm
9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size
90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps
90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm
OD308951/2024-2025:Supply and fixing junction box of size 250*250*160 of Syntax type suitable for providing DP MCB and termination of Street light cable (GSJB2525)
OD308950/2024-2025:Supplying and fixing DIN rail / bar in existing Panel/ Meter board etc. as required.
OD308955/2024-2025:Supply and installation of Bakelite Strip - Current Rating (A): 30 A; Volt: 250 V; 30A 5 Way Bakelite Strip made of Bakelite with Captive Screws with Deep Inserts for Easy Cable Entry, Non-Flammable.
OD308977/2024-2025:MNX Contactor 18A 3P 415V AC In Built 1NO AC-3 220V AC Coil 50/60 Hz (Make : L&T: MNX 18-3P)
OD308978/2024-2025: Analog time switch( Make :L&T : AUTS03ANA00 )
2.10.5:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral
2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
OD311160/2024-2025:Insulated combo bus bar, Cu conductor Insulation PVC (ROHS), 100 Amps, 4 Pole, Fork Type
OD4475/2025-2026:Supply and providing 25x3 mm brass nut and bolt etc as required
OD4476/2025-2026:Supply and providing 12x3mm brass nut and bolt etc. as required
OD311239/2024-2025:Supply & installation of dust and vermin proof, 3 Phase Syntex Meter Board( GS-MB-6535) and to fix KSEB LT meters, TVM with CTs/DHD and fuse cut out etc as required including fixing it on wall, making good the damages colour washing etc. as required. 815*350*230mm
OD4477/2025-2026:Painting charge for base of old Street light
OD4478/2025-2026:Charges towards preparation of documents required for availing Service connection including Plan, scheme etc. of EI and submitting the same to concerned KSEB section office including all laison charges, transportation, AF, stamp etc. (Excluding CD, OYEC, service connection charges etc.)
HARIS T A (BID ID -2219024)
Bidder Name
PRADEEP KUMAR.V.K
HARIS T A
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1249193.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .