Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC D NO 38 39 86 3 4 SAIKRUPA RESIDENCY 104 AREA BAPUJI NAGAR MARRIPALEM VISAKHAPATNAM 530 007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹10.5 L+₹1.6 L (17.9%)Rejected-Finance D NO 58 13 74 10 GF 111 VASAVI PARADISE GOWRI NAGAR WARD NO 42 NAD POST VISAKHAPATNAM 530009 AP | VISAKHAPATANAM | ANDHRA PRADESH | 530009 | L2 | Rejected-Finance The bidder is 2nd lowest,hence rejected | |
| 3 | L3₹11.3 L+₹2.4 L (26.8%)Rejected-Finance | L3 | Rejected-Finance The bidder is 3rd lowest,hence rejected | |
| 4 | L4₹11.3 L+₹2.4 L (27.4%)Rejected-Finance 66 6 410 1 MULAGANDA HOUSING COLONY GAJUWAKA DEPOT VISAKHAPATNAM 530026 | VISAKHAPATANAM | ANDHRA PRADESH | 530026 | L4 | Rejected-Finance The bidder is 4th lowest,hence rejected | |
| 5 | L5₹12.9 L+₹4.0 L (44.9%)Rejected-Finance | L5 | Rejected-Finance The bidder is 5th lowest,hence rejected |
| Sl No | Description | Qty | Unit | VENKATESWARA ENGINEERS AND CONTRACTORS L1 | M/s Jai Ganesh Engineering Solutions L3 | VTC ENGINEERING P LIMITED L9 | ARP ENTERPRISES L8 | SRI DHANESWARI ENGINEERING WORKS L5 | G T SERVICES L2 | GVR CONSTRUCTIONS L4 | NIRANJAN NETHRA BUILDERS L6 | M ANJANEYULU L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S&F in repair of single phase preventer for 5HP pump set complete all as specified and directed by Engineer-in-Charge. | 2 | Each | 8,000 ₹16,000 | 750 ₹1,500 Lowest | 5,000 ₹10,000 | 5,000 ₹10,000 | 2,200 ₹4,400 | 2,400 ₹4,800 | 2,450 ₹4,900 | 1,000 ₹2,000 | 10,000 ₹20,000 |
| 2.00 | S&F in repair of motor protection relay of capacity 2.5 to 4 Amp complete all as specified and directed by Engineer-in-Charge. | 2 | Each | 4,100 ₹8,200 | 1,200 ₹2,400 Lowest | 6,000 ₹12,000 | 5,000 ₹10,000 | 2,000 ₹4,000 | 2,700 ₹5,400 | 2,150 ₹4,300 | 3,000 ₹6,000 | 8,000 ₹16,000 |
| 3.00 | S&F in repair of DOL starter, 3 phase, suitable for 5HP motor complete all as specified and directed by Engineer-in-Charge. | 2 | Each | 6,500 ₹13,000 | 2,200 ₹4,400 | 7,000 ₹14,000 | 5,000 ₹10,000 | 9,999 ₹19,998 | 4,950 ₹9,900 | 2,650 ₹5,300 | 2,000 ₹4,000 Lowest | 3,000 ₹6,000 |
| 4.00 | M&L for Re-winding of mono block motor upto 5 HP capacity with existing gauge and size of copper wire including dismantling and re-fixing of all electrical and other connection complete all as specified and directed by Engineer-in-Charge. | 2 | Each Job | 4,000 ₹8,000 Lowest | 5,000 ₹10,000 | 11,500 ₹23,000 | 25,000 ₹50,000 | 9,000 ₹18,000 | 7,700 ₹15,400 | 7,000 ₹14,000 | 4,500 ₹9,000 | 10,000 ₹20,000 |
| 5.00 | M&L for Re-winding of Submersible motor upto 3 HP capacity with existing gauge and size of copper wire including dismantling and re-fixing of all electrical and other connection complete all as specified and directed by Engineer-in-Charge. | 2 | Each Job | 4,000 ₹8,000 | 5,500 ₹11,000 | 9,500 ₹19,000 | 20,000 ₹40,000 | 6,000 ₹12,000 | 6,900 ₹13,800 | 5,000 ₹10,000 | 3,500 ₹7,000 Lowest | 15,000 ₹30,000 |
| 6.00 | Supplying and laying of GI tubing medium grade pipe including fittings and fixtures of size 80mm dia including taking out old existing U/S pipe complete all as directed by engineer-in-charge | 210 | RM | 580 ₹1,21,800 Lowest | 890 ₹1,86,900 | 900 ₹1,89,000 | 1,000 ₹2,10,000 | 860 ₹1,80,600 | 710 ₹1,49,100 | 956 ₹2,00,760 | 800 ₹1,68,000 | 800 ₹1,68,000 |
| 7.00 | Description all as per item No. 6 but for 50 mm dia | 100 | RM | 330 ₹33,000 Lowest | 650 ₹65,000 | 800 ₹80,000 | 900 ₹90,000 | 650 ₹65,000 | 425 ₹42,500 | 595 ₹59,500 | 600 ₹60,000 | 500 ₹50,000 |
| 8.00 | Description all as per item No.6 but for 40 mm dia | 120 | RM | 280 ₹33,600 Lowest | 450 ₹54,000 | 700 ₹84,000 | 700 ₹84,000 | 550 ₹66,000 | 410 ₹49,200 | 476 ₹57,120 | 450 ₹54,000 | 450 ₹54,000 |
| 9.00 | Description all as per item No. 6 but for 25 mm dia | 110 | RM | 210 ₹23,100 | 350 ₹38,500 | 600 ₹66,000 | 500 ₹55,000 | 250 ₹27,500 | 190 ₹20,900 Lowest | 266 ₹29,260 | 300 ₹33,000 | 300 ₹33,000 |
| 10.00 | Description all as per item No. 6 but for 20 mm dia | 95 | RM | 140 ₹13,300 Lowest | 250 ₹23,750 | 500 ₹47,500 | 400 ₹38,000 | 200 ₹19,000 | 165 ₹15,675 | 216 ₹20,520 | 250 ₹23,750 | 200 ₹19,000 |
Tender Value
₹15.0 L
EMD Value
₹30,000
Closing Date
27 Jun 2025, 6:00 pmClosed
Maj Sudhanshu Mishra, GE
Maj Sudhanshu Mishra, GE (Services) DGNP, Naval base post Visakhapatnam 530014
REPAIR AND MAINTENANCE OF WATER SUPPLY NETWORK ALONG WITH ASSOCIATED ITEM UNDER DGNP VISAKHAPATNAM
2025_MES_711493_1
GE(Services)/TOKEN/03 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
334 days
DGNP(V)
Pls refer tender documents
7 documents required · 7 mandatory
₹500
DGNP VISAKHAPATNAM
₹30,000
Yes
6 Aug 2025
30 May 2025
30 Jun 2025
30 May 2025
27 Jun 2025
13 Jun 2025
Amount
S&F in repair of single phase preventer for 5HP pump set complete all as specified and directed by Engineer-in-Charge.
S&F in repair of motor protection relay of capacity 2.5 to 4 Amp complete all as specified and directed by Engineer-in-Charge.
S&F in repair of DOL starter, 3 phase, suitable for 5HP motor complete all as specified and directed by Engineer-in-Charge.
M&L for Re-winding of mono block motor upto 5 HP capacity with existing gauge and size of copper wire including dismantling and re-fixing of all electrical and other connection complete all as specified and directed by Engineer-in-Charge.
M&L for Re-winding of Submersible motor upto 3 HP capacity with existing gauge and size of copper wire including dismantling and re-fixing of all electrical and other connection complete all as specified and directed by Engineer-in-Charge.
Supplying and laying of GI tubing medium grade pipe including fittings and fixtures of size 80mm dia including taking out old existing U/S pipe complete all as directed by engineer-in-charge
Description all as per item No. 6 but for 50 mm dia
Description all as per item No.6 but for 40 mm dia
Description all as per item No. 6 but for 25 mm dia
Description all as per item No. 6 but for 20 mm dia
Supplying and laying of CPVC pipes size 50 mm bore SDR 11 & Plain CPVC SDR 11 fittings in trench including taking out old existing U/S pipe complete all as specified and directed by Engg-in-Charge.
Description all as per item No. 11 but for 40 mm dia
Description all as per item No. 11 but for 32 mm dia
Description all as per item No. 11 but for 25 mm dia
S & F Stop valves,of size 50mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, including taking down old Unservicable complete all as directed by engineer-in-charge
Description all as per item No. 15 but for 40 mm dia
Description all as per item No. 15 but for 25 mm dia
Description all as per item No. 15 but for 20 mm dia
Cleaning of under ground /semi under gound sump / overhead water tank of capacity not exc. 5000 ltr by draining out the water and cleaning the sump with cleaning agent / bleaching power of sufficient quantity and repair the sump where ever required with cement work etc all as decided and specified by Engineer -in-Charge.
Cleaning of water tank of capacity not exc. 10000 Ltr by draining out the water and cleaning the tank/sump with cleaning agent / bleaching power of sufficient quantity and repair the sump where ever required with cement work etc all as decided and specified by engineer -in-charge.
Cleaning of under ground /semi under gound sump of capacity not exc. 225000 Ltr by draining out the water and cleaning the sump with cleaning agent / bleaching power of sufficient quantity and repair the sump where ever required with cement work etc all as decided and specified by engineer -in-charge.
M & L for cleaning of fountain , draining out the water and cleaning the fountain with cleaning agent / bleaching power of sufficient quantity and repair the sump where ever required with cement work etc all as decided and specified by engineer -in-charge.
Supply & Fixing motor protection relay MPR 300, earth fault (10-50A), Over load ((8-22A) as per existing sample including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
Supply and fixing submersible copper cable 1100 V grade 2.5 Sq.mm. 2 core, nominal cross section area. including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
S&F motor protection Relay with short circuti & overload protection of thermal release range 5-20 Amps including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
S&F 3 pole power contactors Type MNX 22 as per sample including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
S&F 3 phase voltage meter conzerv, DM3210 as per sample including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
S&F 3 phase Ampere meter conzerv, DM3110 as per sample including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
Excavation in trenches n.exc 1.5 mtr deep and n.exc 1.5 mtr wide getting out in soft/dense soil complete all as specified and directed by Engr-in-Charge.
M&L for sand cushioning for cable and levelling and ramming complete all as specified and directed by Engr-in-Charge.
Supply and laying reinforced precast concrete cable cover, class LV type 1, flat size 250 mm x 150 mm x 40 mm all as specified and directed by Engr-in-Charge.
Returning filling in including spreading, levelling, watering and and well ramming complete all as specified and directed by Engr-in-Charge.
Removing excavated material n.exc 50 m away and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge
Repair of pump set of 2 HP capacity including dismantling from its existing position and replacement of all old worn out parts and fixing it to its original position all as directed and specified by engineer in charge.
Repair & maintenance of Submersible pump and motor set upto 1.5 HP, 3 phase, 415Volts, including necessary replacement of worn out winding, bearings and bushes, impllers etc parts of motor and pumps to assure trouble free operation of the Pump Set all as specifed and directed by the Engr-in-Charge.
Supply and replace pump set 5 HP, three phase, model No: KDS-550++, Make: Kirloskar monoblock pump complete including testing, all as per specified and as directed including taking down old unserviceable and deposit to MES store.
Comprehensive maintenance and servicing of monoblock Pump Set 5 HP, 3 phase, 415Volts, 50C/S with discharge rate 220LPM at 40 Mtrs head, Type and model-KDS 550++ including necessary replacement of worn out bearings and bushes periodically to assure trouble free operation of the Pump Set all as specifed and directed by the Engr-in-Charge. Make: Kirloskar. Note:- 1.Servicing to be doneof P/Set=02 Nos.
Supply and replace of submersible pump set 1 HP, 220V, 50 Hz, RPM 2800, 52 Mtr head, single phase complete including testing, including taking down old unserviceable and deposit to MES store all as specified and directed by the Engineer-in-Charge.
Supply & replace submersible pump control panel board single phase MR-G2, with start capacitor (100-120) MFD, Run capacitor (1x36) MFD, Relay range 6-10Amps, Motor rating 1 HP incl Amp meter and ON/Off push button with indication lamp. including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
M & L for valve chamber including excavation in any type of soil, spreading, levelling and refilling etc. PCC (1:4:8) type D2 for foundation, brick work of one brick thick wall in CM (1:4) including internal plaster 15 mm thick in CM (1:4) external plaster 15 mm thick (1:4) and providing coping in PCC (1:2:4) type B1, angular iron frame of size 50 x 50 x 6 mm with 6 mm thick MS plate cover complete including locking arrangements and painting with 2 coat of enamel paint on both side and outside surfaces complete as specified for the size of chamber 1000 mm x 1000 mm x 600 mm comp[lete all as specified and directed.
Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sq mm 3.5 core, including taking down old unserviceable cable complete, all as specified and as directed by Engr-In-Charge.
Description all as per item No. 41 but conductor of size 35 sqmm 3.5 core
Description all as per item No. 41 but conductor of size 25 sqmm 3.5 core
Description all as per item No. 41 but conductor of size 16 sqmm 4 core
Supply and fixing of Sluice Valve Class PN 1.6 of size 150 mm dia including steel spindle with head, iron wheel, gland with gland packing, etc and necessary fixing arrangement like rubber gasket etc.,including taking down old unserviceable complete all as specified and directed by Engr-in-Charge.
Description all as per item No 45 here-in-before but size of 80 mm dia.
Supply and fixing of butterfly valve of 80 mm dia construction of body - VI, Disc - SS 316 Lining EPDM, class PN 1.0 including fittings and fixtures with suitable size neoprene rubber gasket, SS Nuts and bolts & 2 Nos of washers each bolts including taking down old unserviceable complere all as specifed and directed by Engineer-in-Charge.
Supply and fixing MCCB 4 Pole adjustable type, thermal magnetic released 415 V, 250 Amps, with breaking capacity 36 KA complete, including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
Description all as per item No 48 here-in-before but 200 Amps,3pole with breaking capacity 36 KA.
Description all as per item No 48 here-in-before but 160 Amps,3 pole with breaking capacity 36 KA.
Description all as per item No 48 here-in-before but 400 Amps, 4 Pole with breaking capacity 36 KA.
Supply and fixing MCCB 3 Pole Fixed type, 415 V, 100Amps, with breaking capacity 16 KA complete, including taking down old unserviceable one, all as specified and directed by the Engineer-in-Charge.
Description all as per item No 52 here-in-before but 63 Amps 3 Pole with breaking capacity 16 KA.
G T SERVICES (BID ID -3330847)
M/s Jai Ganesh Engineering Solutions (BID ID -3330329)
GVR CONSTRUCTIONS (BID ID -3330869)
SRI DHANESWARI ENGINEERING WORKS (BID ID -3338598)
NIRANJAN NETHRA BUILDERS (BID ID -3334653)
M ANJANEYULU (BID ID -3339175)
ARP ENTERPRISES (BID ID -3338577)
VTC ENGINEERING P LIMITED (BID ID -3330347)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .