PERIODICAL SERVICES TO CERTAIN BLDGS, DAY TO DAY B/R AND E/M MAINTENANCE OF CERTAIN BUILDINGS AND OTHER CONNECTED WORKS AT MIL STN DHARCHULA UNDER GE (MES) PITHORAGARH.

Amount

DESCRIPTION OF ITEMS

M &L for preparation of plastered or unplastered old decorated surfaces of walls applying one coat of white wash on walls complete all as specified and directed.

All as per Item No. 1 above but applying one coat of white wash on ceiling complete all as specified and directed.

M &L for preparation of (previously treated) plastered or unplastered surfaces of walls and applying one coat of oil emulsion distemper any tint of walls complete all as specified and directed.

M&L for preparing surfaces, plastered or unplasterd old decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified and directed.

M &L for preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of cement base paint on walls complete all as specified and directed.

M &L for preparing old previously treated steel surface of any description not other wise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M &L for preparing old previously treated surface of wood and wood based surfaces of any description not other wise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparing old previously treated surfaces of corrugated/plain sheets as in roof covering /wall over 10 cm girth or width and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

M & L preparing old previously treated surfaces of corrugated/plain sheets as in roof covering /wall over 10 cm girth or width and applying two coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

15014A M&L for preparation of old plastered surface wall by complete removing old surface and applying two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-In-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Material and Labour for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed

M/L for Vitrified ceramic tiles 10 mm thick (Square/Rectangular), light shade, polished area of each tiles tile exceeding 0.36 sqm and not exceeding 0. 42 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles with as in floor, finished the surface rough to receive tiles complete all as spfd & directed.

Material and Labour for glazed tiles, coloured (300x 250 x 7mm/450x350x7mm) set and joint in veticle surfaces walls over 10 mm thick plaster in CM 1:4 set & jointed in neat cement sullry & pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.

M&L 10 mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces fair and even complete all as specified and directed.

M&L for Preparing surfaces, plastered or unplasterd new decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of primer any tint of walls complete all as specified and directed.

M&L for Preparing surfaces, plastered or unplasterd new decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of wall putty and primer any tint of walls complete all as specified and directed.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and directed.

S&F 125mm aluminium handles, cast type anodised complete all as specified & directed by Engr-In-Charge.

S&F 125 mm aluminium anodised barrel tower bolts extruded section complete all as specified & directed by Engr-In-Charge

Supply and fix Mild steel butt hinges medium weight,cold rolled 75 mm in size complete all as specified and directed.

S/F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking down old pipe, complete all as spfd & directed.

Supply and fix in repair 15 mm bore bib taps, Chromium Plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified & directed.

S&F 15 mm Stop valves, fancy type, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed.

Material and labour for Grating doom 100 mm dia with wash hole of PTMT in repair (Minimum weight 40 gms) complete all as specified and directed.

Supply and Fix PVC connections 15 mm size with PTMT nuts of length 600mm long all as specified and as directed.

Supply and fix vitreous china squatting pan "Orissa pattern" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as specified and directed.

S&F vitrous china wash down water closetpan (padestal pattern) white colour(excluding cistern), complete all as specified and directed.

Supply and Fix in repair 10 ltr capacity PVC flushing cistern low level white with inlet pipe,ball valve,float valve and handle including brackets complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed.

Supply and Fix in replacement lid with hinges on one side & locking facility on another side/ or with thread of PVC drinking water service tank of capacity upto 2000ltrs complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as spfd and directed.

S/F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts class 8 complete all as spfd & directed.

S&F 0.50mm thick plain, black, mild steel sheeting, in ridges, hips, valley gutters,drip and straight flashings length and girth as fixed with 'L' type or 'J' type or cranked hook bolts class 8 complete all as spfd & directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc. complete all as specified.

M & L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in PVC concealed /surface conduit 20mm or higher dia, complete with all accessories /fitting in sunken terminal boxes modular /non modular ( terminal box should be of Ist class hard wood (Shisham) /PVC heavy duty /GI ) with suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover / modular sheet cover in case of modular sunken box .open recessed on all and brass screw and washer/ including modular top cover sheet , including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly including making good disturbed surfaces to same as previous existing complete all as specified for one light /fan /bell point controlled by one way switch of 5/6 Amps.

ditto as per item No 41 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps

ditto as per item No 41 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps

M & L point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in PVC concealed /surface conduit 20mm or higher dia, complete with all accessories /fitting in sunken terminal boxes modular /non modular ( terminal box should be of Ist class hard wood (Shisham) terminal switch board/PVC/GI ) with suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover / open recessed on all and brass screw and washer/ including modular top cover sheet , including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly including making good disturbed surfaces to same as previous existing complete all as specified for one light /fan /bell point controlled by one way switch of 5/6 Amps.

S&F switch piano flush button single pole one way 5 Amps complete all as specified.

S&F switch piano flush button single pole two way 5/6 Amps complete all as specified.

S&F bell push flush button single pole one way 5Amps complete all as specified.

S&F switch piano flush button single pole one way 15Amps complete all as specified.

S&F socket out let 3 pin 5/6 Amps flush type complete all as specified.

S&F socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, non shutters, non interlocking complete all as specified.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

Supply & fixing in replacement of modular switch one way 06 Amps,1 module, 240 volts complete all as specified & directed

Supply & fixing in replacement of modular socket one way 6 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular switch one way 16 Amps,1 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular socket one way 6/16 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular Bell Push 6A,(1 or 2 module as per site), 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular Two way switch 6A,(1 or 2 module as per site), 240 volts complete all as specified & directed.

Supply and fixing modular blanking /dummy Plates 1 M complete all as specified & directed.

Supply and fixing Modular steped type electronic fan regulator 2 module on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed by Engineer-in-Charge.

Supply & fixing in replacement of modular white cover plate with frame including PVC Sunken box ,3 module for 6 / 16 Amps Switches , 240 volts complete all as specified & directed

Supply & fixing in replacement of modular white cover plate with frame including PVC Sunken box ,4 module for 6 / 16 Amps Switches , 240 volts complete all as specified & directed .

Supply & fixing in replacement of modular white cover plate with frame including PVC Sunken box ,6 module for 6 / 16 Amps Switches , 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame including PVC Sunken box ,8 module for 6 / 16 Amps Switches , 240 volts complete all as specified & directed.

S&F Ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified and directed.

S&F lamp holder PVC/poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified and directed.

S&F in replacemnt of Bell multi music type complete all as specified and directed.

S&F sheet metal enclosure for DB SPN 2 way 240 Volts, single door suitable for housing MCBs and isolators complete all as specified.

S&F sheet metal enclosure for DB SPN 4 way 240 Volts, Double door suitable for housing MCBs and isolators complete all as specified and directed.

S&F sheet metal enclosure for DB SPN 6 way with 200 Amp rated bus bar 240 Volts, Double door suitable for housing MCBs and isolators complete all as specified and directed.

S&F sheet metal enclosure for DB SPN 8 way with 200 Amp rated bus bar 240 Volts, Double door suitable for housing MCBs and isolators complete all as specified and directed.

S&F sheet metal enclosure for DB SPN 12 way with 200 Amp rated bus bar 240 Volts,double door suitable for housing MCBs and isolators complete all as specified.

S&F sheet metal enclosure for DB TPN 4 way with 200 Amp rated bus bar 415 Volts,double door suitable for housing MCBs and isolators complete all as specified.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 160 Amp and 12 Nos MCB'S inside of DB, including 100 Amps ,25 KA 4 pole MCCB with metal door and flush to wall/fixed on wall surfce including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall of fixed on surface of wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed.

S&F MCB SP 6-32 Amps, 240volts 10KA complete all as specified and directed.

S&F MCB SPN 32 to 63 Amps, 240volts 10KA complete all as specified and directed.

S&F MCB 4 pole 32 to 100 Amps, 240volts 10KA complete all as specified.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note - one meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length.

Supply and fixing LED lights fitting integrated 1x 20W, 220V, AC ,Approx 4 feet size decorative box type with driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fixing LED lights fitting integrated warm white 1x 20W, 220V, AC ,Approx 4 feet size decorative box type with driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fixing LED lights fitting mirror type with high out put diffuser 2 feet,1x 10W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F LED bulb 12 watts, 220V complete all as specified.

Supply and fixing LED luminaire 600 mm x 600 mm panel, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

Supply and fixing LED luminaire 600 mm x 600 mm panel warm white, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

Supply and fixing LED Bulk head 10 watt with aluminium housing complete all as specified and directed.

Supply and fixing Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed.

Supply and fix 5W Aluminium Flexible Wall Reading Lights with On Off Switch ,Gooseneck Light - 360° Lighting complete all as specified and directed.

Supply and installed LED security light fitting 1x35 Watt luminaries with pressure die cast aluminium housing , with lenes embeded , IP-66/IP 65 Protection complete all asspecified and directed.

supply and fixing GI bracket made out of 0.9-1.2 mtr GI pipe bent to shape light grade of 25to 40 mm dia, bracket mounting clamps nut bolts etc all as specified and directed.

Supply and fixinf post Top Lantern 25 wattt ,IP 65 including all accessories ti fixing all as specified and directed.

Supply and fixing post Top Lantern 15 wattt ,IP 65 including all accessories ti fixing all as specified and directed.

Taking down and servicing ceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.

Refixing of ceiling fan including fixing blades and making connection all as specified and directed.

M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified.

Supply only Ball bearing for Ceiling fan after and including taking down old ball bearing complete all as reqd at site, specified.

Supply only capacitor 2.5 mfd±5%, 440 Volt, AC, 50Hz after removing old defective condensor complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 225 CMM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

supply and fixing ceiling fans 1400 mm Min,250 CMM, Min 350 RPM, power consumption mot more than 62 watt incuding wire to fix ceiling fan with with ceiling rose all as specified and directed.

Supply and fixing ceiling fan stator with copper winding as all as specified and directed.

Taking down exhaust fan of any size from existing position, dismantling, overhauling and cleaning throughly, oiling/greasing and re- assemble after replacing unsv parts etc and rehanging the same duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.

M&L for taking out burnt copper winding from exhaust fan of any size/type and rewinding with existing /same guage of super enammeled copper wire complete all as specified.

Supply only 200/250mm sweep PVC body exhaust fan motor complete all as specified.

Supply only capacitor 1-1.5 mfd±5%, 440 VAC, 50Hz Suare shape suitable for PVC body exhaust fan 200/250mm sweep or suitable one after removing old defective capacitor complete in exhaust fan all as specified.

Supply only capacitor 4 mfd±5%, 440 Volt, AC, 50Hz or suitable one after removing old defective capacitor complete in exhaust fan all as specified.

Supply and fixing motor of metal exhaust fan 300mm copper wounded all as specified and directed.

Supply and fixing motor of metal exhaust fan 450mm copper wounded all as specified and directed.

Taking down flate-plate solar collector storage solar water heater of capacity upto 250ltr, dismantling inner tank and outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, welding of inner tank if required at site, laser/ultrasonic welding for bonding fin and raiser tube, repair of copper bracing for bonding of header and raiser making leak proof, repair & repalcement of back and side insulation material, rethreading of inlet/outlet pipe 20 mm dia, reassembling the same after replacing u/s items i.e. heating element, thermostete, toughned glass, connection pipe with clamp etc. at existing location including necessary fasteners to ensure proper safety as reqd at site, repair/welding of MS structure for collector stand, testing and commissioning after re-installation at site complete all as specified. Note: Spare parts (heating element, thermostete, toughned glass, connection pipe with clamp) will be measured and paid separately under respective items as supply only as mentioned below.

Supply only heating element of 3.0 KW for solar water heater (as per sample ISI brand) including taking down old heating element complete all as specified.

Supply only thermostate for solar water heater.

Supply only flate-plate collector having absorber plate with copper tubes, thermal insulation with glass wool, glazing with transparent cover to prevent heat loss and made with iron poor solar safety toughened glass, 4 mm thick with low iron, transmissivity upto 92% at near normal incidence glass as same as existing.

Supply only SS heat exchanger / Hot water tank of cap 100 LPD with outer cladding & frames of SS/AL/GI complete all as specified.

Supply only Heavy duty nylon threaded flexible PVC/CPVC connection pipe 25 mm dia suitable for both hot & cold watrer supply of solar water heater complete all as specified.

Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 4.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note - One meter of conduit along with 2x4.0 Sqmm wire and one 4.0 sqmm earth wire shall be measured as one length.

Supply only GI/brass adjustable scew clamp as per sample

Supply, laying and testing GI pipe medium grade 15 mm, ISI marked, with all fittings and fixed complete to wall and ceiling or laid on floors complete all as specified and directed.

Supply, laying and testing GI pipe medium grade 20 mm, ISI marked, with all fittings and fixed complete to wall and ceiling or laid on floors complete all as specified and directed.

Suppy and fixing copper element of water heater 2 KW capacity complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing and re-fixing the same at new or old locations by replacing worn out GI fittings complete all as specified. Note: GI fittings as required shall be measured and paid separately under respective items as supply only as mentioned below.

Supply only Elbow 15mm

Supply only Tee 15mm

Supply only Socket 15 mm

Supply only Union 15mm

Supply only Reducer Socket 20/15 mm

Supply only Tank nipple 15 mm

Supply only Nipple 15 mm

Supply only Elbow 20mm

Supply only Tee 20x20x15mm

Supply only Socket 20 mm

Supply only Union 20mm

Supply only Nipple 20 mm

Supply ony float valve of NB 15mm inside SS tank of solar water heater

Supply only Butterfly valve 15mm

S&F 20mmball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified.

Supply and fixing 1 phase,2 wire, Accuracy Class: 1.0, Conformation with IS:13779, Current: 5 – 30 Ampere, Reference voltage: 240 Volts, Reference frequency: 50 Hz with Multifunction Display: Digital LCD display All as specified and directed.

Suppy and Fixing Chargeble LED Bulb 12 B 22 watt having backup minimum three hours complete all as specified and directed.

Material and Labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised or iron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifitting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009.

Note : Tenderers may note that amount of credit Rs 45,011.50 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S SUNIL KUMAR CONT (BID ID -3460908)

M/s Karki Krishna Singh (BID ID -3461203)

m/s bahadur singh samant (BID ID -3462884)

M/S HIRA CHAND (BID ID -3462657)

m/s RC punetha (BID ID -3462481)