REPAIR AND REPLACEMENT OF JOINERY FLOORING TILLING SANITARY FITTINGS AND SIMILAR WORKS FOR E J AREA AT NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compleate all as specified and directed by Engr-in-Charge.

M & L for glazed ceramic colored designed straight edge tiles 7mm thick area of tiles of size 600X300x7 mm on vertical surfaces such as skirting or dados laid over cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match incl Rendering in CM 1:4, 10mm thick for fixing tiles on skirting/dado compleate all as specified and directed by Engr-in-Charge..(Make-Johnson/Somany/Kajaria)

M & L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size 300X300X7MMon floors laid over cement mortar screeding set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 compleate all as specified and directed by Engr-in-Charge. (Make-Johnson/Somany/Kajaria)

M & L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on vertical surfaces as skirting including 10mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles compleate all as specified and directed by Engr-in-Charge. (Make-Johnson/Somany/Kajaria)

S&F vitrified tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile of size 600X600 mm, in floors and s etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 compleate all as specified and directed by Engr-in-Charge.(Make-Johnson/Somany/Kajaria)

S&F vitrified tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in vertical surfaces as skirting including 10mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles compleate all as specified and directed by Engr-in-Charge.(Make-Johnson/Somany/Kajaria)

Taking down cement plaster of any description on brick or stone walls, ceiling including racking out joints, hacking for key, scrubbing down with water etc compleate all as specified and directed by Engr-in-Charge.

M&L for 10mm thick plaster in CM 1;4 with water proofing on walls compleate all as specified and directed by Engr-in-Charge.

Demolition of reinforcement cement concrete for roofs, floors beams, staircases, landing, chajjas and similar suspended work including removal of all demolished material form site and disposed to outside of Naval Base compleate all as specified and directed by Engr-in-Charge.

M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set in neat cement slurry with grey cement and pigments laid over 20 mm thick screed bed in CM 1;6 and including taking down old tiles compleate all as specified and directed by Engr-in-Charge. (make-Eurocon/sirex/Johnson)

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) compleate all as specified and directed by Engr-in-Charge.

M&L pcc 1:4:8 type D2 100 mm thick using 40 mm graded aggregates as in sub base of floor compleate all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 typeC2 75 mm thick using 40 mm graded stone agg surface compleate all as specified and directed by Engr-in-Charge.

S & F Vitreous china wash down water closet pan(EWC), any color, pedestal pattern fixed in repairs compleate all as specified and directed by Engr-in-Charge. Make-Parry ware (Cat No-C844A White) or Cera (Cat No-3131 White) or Hindware (Cat No-92082 White)

S&F in repairs vitreous china squatting pan orissa pattern (IWC) size 580x440mm white with integral foot rest including provision of lime concrete bedding compleate all as specified and directed by Engr-in-Charge.

S & F in repairs Plastic seat cover, any color closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts compleate all as specified and directed by Engr-in-Charge. Make Parryware, cera, Jaguar

S & F PVC valveless, syphonic action type, flushing cistern, low level, any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked fixed in repairs compleate all as specified and directed by Engr-in-Charge. Make Parryware, cera, Jaguar

S & F in repairs PVC connection 15mm bore 45cm long with brass coupling compleate all as specified and directed by Engr-in-Charge.

S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl PVC waste pipe 40mm bore 90cm long with coupling spring type compleate all as specified and directed by Engr-in-Charge. .Parryware Cat No- C844T/Johnson Cat No - P5115MPW/Jaguar Cat No- CNS-WHT-809,

S&F vitreous china urinal bowl flat back of size 465 X 355 X 265mm white alongwith waste coupling including fixing plugs, beding urinal against wall in CM 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement as in repairs compleate all as specified and directed by Engr-in-Charge. Make: Parryware cat No - C0578 White Colour/ Johnson Cat No-P0519PW/ Jaguar Cat No- URS-WHT-13261

S&F in repairs 125 mm dia stainless steel grating as in repair compleate all as specified and directed by Engr-in-Charge.

S&F of Brass Chromium plated waste coupling 32 mm dia as in repairs compleate all as specified and directed by Engr-in-Charge.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement as in repairs compleate all as specified and directed by Engr-in-Charge.

S&F 32 mm dia size PVC waste pipe with cup head for Wash Hand Basin as in repair compleate all as specified and directed by Engr-in-Charge.

S&F stainless steel sink with draining board made out of 1.0mm thick shet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410X330X160mm compleate all as specified and directed by Engr-in-Charge. Make Nirali/Jayna/Coment as in repair.

S & F Pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed in repairs compleate all as specified and directed by Engr-in-Charge.. Make-CERAParryware Cat No - T0802A1/Johnson Cat No- T2601C4/Jaguar Cat No- ARI-39011

S&F CP tubular towal rail 20mm dia , 600mm long all as specified as in repair.(Brass chromium plated) compleate all as specified and directed by Engr-in-Charge. Make-KAG Aqua or equilvent

S&F in repairs CP health faucet including flexible pipe and fittings compleate all as specified and directed by Engr-in-Charge. make Parryware CAT No: T9961A1, cera CATnNo 8030101, jaguar ALD-CHR-573

M&L for cutting grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc complete all as specified and directed by Engr-in-Charge

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface compleate all as specified and directed by Engr-in-Charge.

M&L cement concrete type B-1, 1:2:4 (20mm graded aggregate) 70 mm thick as in flooring compleate all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound Conplast X421IC compleate all as specified and directed by Engr-in-Charge.

M&L waterproofing treatment for toilet with Brush bond of make FOSROC compleate all as specified and directed by Engr-in-Charge.

S&F in repairs bottletrap compleate all as specified and directed by Engr-in-Charge. make Parryware Cat No- T3203A1/Johnson Cat No- T0060C/Jaguar Cat No- ALD-769L300x190

S/F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples compleate all as specified and directed by Engr-in-Charge.

Taking down chowkats n.exc 1.5Sqm but with shutters (without taking off shutters from the frames) compleate all as specified and directed by Engr-in-Charge.

Ditto as above but exc 1.5 Sqm but n.exc 4 Sqm compleate all as specified and directed by Engr-in-Charge.

Taking down shutters of any description n.exc 1 Sqm each compleate all as specified and directed by Engr-in-Charge.

ditto,but exc 1 Sqm but n.exc 2 Sqm each compleate all as specified and directed by Engr-in-Charge.

M/L 2nd class Hw Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed compleate all as specified and directed by Engr-in-Charge.

M/L 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated compleate all as specified and directed by Engr-in-Charge.

M/L 2nd class HW 30mm Glazed and ske- leton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (B); supplied and fitted to chowkats compleate all as specified and directed by Engr-in-Charge.

M&L Preperation of new wood/wood based surface exc 10cm width/girth & apply painting two coats of synthetic enamel paint over a coat of pink primer compleate all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads compleate all as specified and directed by Engr-in-Charge.

S&F 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples compleate all as specified and directed by Engr-in-Charge.

S/F in repair Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing compleate all as specified and directed by Engr-in-Charge. (Make-Festel/Polycast)

Factory Made Solid PVC Moulded Door Shutter, in repair 28 to 30 mm thick with particle board(stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing compleate all as specified and directed by Engr-in-Charge.(Make-Festel/Polycast)

M&L for repair to aluminium doors of size n.exc 2 Sqm and making good and functional including changing of pivot,repairs to lock,handle,rubber beadings etc compleate all as specified and directed by Engr-in-Charge.

M&L for repair to aluminium window of any size, pattern and any number of shutter & making good and functional including changing of pivot,repairs to lock,handle,rubber beadings etc compleate all as specified and directed by Engr-in-Charge.

S/F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed,Aluminium(Die cast) body compleate all as specified and directed by Engr-in-Charge. (Make: Everite/Universal/Dyana)

M/L PCC 1:2:4 type B-1,using 20mm graded stone aggregate for fixing holdfast including necessary form work compleate all as specified and directed by Engr-in-Charge.

S/F MS holdfast made out of FI 25x3mm compleate all as specified and directed by Engr-in-Charge.

S/F 200mm long Alumn anodised barrel towerbolt compleate all as specified and directed by Engr-in-Charge.( Make:Crown / Jyothi / Argent )

Do but 100mm compleate all as specified and directed by Engr-in-Charge.( Make:Crown / Jyothi / Argent )

S/F 200mm long Alumn anodised sliding bolt compleate all as specified and directed by Engr-in-Charge.( Make:Crown / Jyothi / Argent )

S/F 125mm long Alum anodised handle compleate all as specified and directed by Engr-in-Charge.( Make:Crown / Jyothi / Argent )

Do but 100mm long compleate all as specified and directed by Engr-in-Charge.( Make:Crown / Jyothi / Argent )

S/F 100mm stainless steel butt hinges,medium wt cold rolled compleate all as specified and directed by Engr-in-Charge.( Make:Crown / Jyothi / Argent )

Do but 75mm compleate all as specified and directed by Engr-in-Charge.( Make:Crown / Jyothi / Argent )

M&L for 15mm thick plaster in CM 1;4 finished even and smooth without using extra cement compleate all as specified and directed by Engr-in-Charge.

M&L for preparation new plastered internal surfaces and applying two coats of Interior Emulsion (Asian Rayale interior enulsion) over a coat of primer and 3mm thick wall care putty compleate all as specified and directed by Engr-in-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation new plastered External surfaces for preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer over 3mm thick wall care putty of three layer, complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces compleate all as specified and directed by Engr-in-Charge. (Make-Asian Apcolite or Equal from Berger, Nerolac)

M&L for providing, 75mm thick cement concrete, Type C1, 1:3:6 (using 20mm graded aggregate) for plinth protection compleate all as specified and directed by Engr-in-Charge.

M&L for 10mm thick Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, for joints between bays compleate all as specified and directed by Engr-in-Charge.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) compleate all as specified and directed by Engr-in-Charge.

S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders compleate all as specified and directed by Engr-in-Charge.

Destruction of growth of weed plants with roots from on the roof of bldgs and on the wall of bldgs (any height) with 2.40 oil mixed veedicides or mixed with veedol chemical solution and sprayed on and around roots and at places of possible growth of weeds compleate all as specified and directed by Engr-in-Charge.

M & L formwork to sides and soffits of beams, lintels, cantilevers etc compleate all as specified and directed by Engr-in-Charge.

M & L RCC type B1 1:2:4 (20 mm graded stone aggregate) in beams, cantilevers, lintel etc compleate all as specified and directed by Engr-in-Charge.

M & L for precast cement concrete louvers and jallies, 50 mm thick, type B0 1:2:4 (12.5 mm graded stone aggregate) including all moldings but excluding frame set in CM 1:6 compleate all as specified and directed by Engr-in-Charge.

S&F Machine cut kota stone slab flooring and skirting 20-25mm thick over 20 mm thick cement screed 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing compleate all as specified and directed by Engr-in-Charge.

M&L for providing pressure grouting on leaking points using 40 psi grout pump , sealing the cracks and honey-combs using cementitious sealent , applying a coat of polyplus AC , two component acrylic based , water proof coat @ 500 gms/sqm , after 4 hrs applying second coat with polyplus AC @ 500 gms/sqm compleate all as specified and directed by Engr-in-Charge.

S&F steel rolling shutters 1.25mm thickness of laths, with all guide mechanism, as specified including top cover anchoring rod, hasp & staple & one shop coat of primer, erected in position as indicated compleate all as specified and directed by Engr-in-Charge.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 5 cm thick incl well ramming including watering as required compleate all as specified and directed by Engr-in-Charge.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS standards of 60mm thickness, M-40 grade, laid over with grey cement and pigments compleate all as specified and directed by Engr-in-Charge.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment compleate all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating compleate all as specified and directed by Engr-in-Charge.

Anaswara Constructions

Vidya constructions

M/s ANTONY THOMAS AND CO

HEAVEN ENGINEERS AND CONTRACTORS

MS BUILDERS