Nadghar

[1] Excavation for foundation upto 1.5 m depth including sorting out 48.80 Cum 125.85

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

[2] Excavation for foundation upto 1.5 m depth including sorting out 24.50 Cum 160.89

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard soil

[3] Providing and laying cement concrete work 1:2:4 (1- Cement : 2- 11.70 Cum 4112.90

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete Including cost of formwork and

reinforcement for reinforced concrete work in (A) For PCC

[4] Providing and laying Ordinary cement concrete work 1:1.5:3 (1- 9.80 Cum 5513.54

Cement : 1.5- Coarse sand : 3- graded stone aggregates 20 mm

nominal size) and curing complete Including cost of formwork

and reinforcement for reinforced concrete work in (A) footings

[5] Brick work using common burnt clay building bricks having 17.00 Cum 4279.97

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional

[6] Providing and laying ordinary cement concrete 1:1.5:3 (1- 9.70 Cum 8035.64

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc.complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M

[7] Providing and laying ordinary cement concrete 1:1.5:3 (1- 1.40 Cum 9091.01

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement.

[8] Providing and laying ordinary cement concrete 1:1.5:3 (1- 0.40 Cum 7082.14

Cement : 1.5- Coarse sand : 3- graded stone aggregates 20 mm

nominal size) for reinforced concrete Chhajjas not exceeding

10cm. thickness upto floor two level including finishing the

exposed surfaces with cement mortar 1:3 (1- cement, 3 Fine

sand) to give a smooth and even surface centering and formwork

and curing complete excluding cost of reinforcement.

[9] Providing and laying ordinary cement concrete 1:1.5:3 (1- 3.40 Cum 11028.20

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (B) COLUMNS: (iii) Having cross-

sectional area more than 0.12Sq.M and upto 0.18 Sq.M

[10] Providing and Laying ordinary cement concrete 1:1.5:3 (1- 8.20 Cum 7258.19

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than

cm and upto 13 cm. thickness

Description of Item Quantity Unit Rate In figures Amount

[11] Filling available excavated earth (excluding rock) in trenches. 42.00 Cum 137.47

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

[13] Providing TMT Bar FE 500D reinforcement for R.C.C. work 3840.90 Kg 77.28

including bending, binding and placing in position complete upto

floor two level

[14] Brick work using common burnt clay building bricks having 20.70 Cum 4568.40

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional For GF

[15] Half brick masonry in common brunt clay building bricks having 30.70 Sqm 759.86

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:3 ( 1-Cement : 3- coarse sand ) with 2 Nos of 6mm Mild steel

round bars after every three course embedded in Cement Mortar

in foundation and plinth (B) Conventional

[16] P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 60.80 Sqm 1294.51

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

[17] Providing and laying Ceramic tiles 8mm thick in flooring treads of 4.90 Sqm 1015.77

steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white

cement including Dedo.

[18] Providing and laying broken chine mosaic flooring for terrace 51.80 Sqm 779.69

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc. as directed.

[19] Providing and laying white glazed tiles 8mm thick in flooring 19.30 Sqm 889.23

treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.

[20] Providing fixing of Polished Marble Colour or Black frame for 15.00 Sqm 3205.69

Doors & Windows, Platform including necessary holdfasts, holes

for fixtures and fastenings incl. all labour & materials etc. comp

[21] Providing and laying polished Kota stone slab flooring over 15.10 Sqm 1019.39

20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

[22] Providing and Fixing Windows with 40 X 40 X 5 mm. iron angle & 7.90 Sqm 3981.72

frame 30 X 30 X 4 mm. size in Double Shutter with 1 mm thick MS

plate with hold fasts, iron hinges, handles, stopper, locking

arrangement etc. comp. Steel welded is built up section cutting

hoisting, finishing in two coats of oil painting over coat of prime

coat etc. complete.

Description of Item Quantity Unit Rate In figures Amount

[23] Providing and fixing 35mm. Thick Panelled,glazed orPanelled and 4.10 Sqm 3940.01

glazed shutters for doors,windows andclearstory windows

including anodised alluminiumbutt hinges with necessary screws

and Indian TeakWood shutters with-(B) Partical board

anells.12mm. thick including applying primer and two coats of oil

painting etc. complete

[24] Providing and fixing 30mm thick FACTORY MADE SOLID PANEL 1.60 Sqm 1146.37

PVC DOOR SHUTTER consisting of frame made out of M.S. tubes

of 19 gauge thickness and size of 19mm x 19mm for stiles and

15mm x 15 mm for top and bottom rails. M.S. frame shall have a

coat of steel primers of approved make and manufacture, M.S.

frame shall be covered with 5 mm thick heat moulded PVC ‘C’

channel of size 30 x 50 mm forming stiles, and 5mm thick 75mm

wide PVC sheets for top rail, lock rail and bottom rail on either

side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as

gap insert for top rail and bottom rail, Panelling of 5 stiles and

rails with 30mm wide x 5mm thick PVC sheet beading on eighter

side, and joined together with solvent cement adhesive,. An

additional 5mm thick PVC strip of 20mm width is to be stculk on

the interior side of the ‘c’ channel using PVC solvent cement

adhesive etc. complete as per direction of Engineer in charge,

manufacture’s specification and drawing.

[25] Providing 20mm thick sand faced cement plaster on walls upto 141.80 Sqm 350.57

height 10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) including

scaffolding curing etc. complete.

[26] Providing 15mm thick cement plaster in single coat on Rough 245.30 Sqm 200.08

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)

[27] Finishing wall with weather proof exterior emulsion paint on wall 211.10 Sqm 122.13

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete

[28] Applying two coats of acrylic laphy (putty) & two coats of primer 175.70 Sqm 40.59

of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered

smooth as per instruction of Engineer in charge & approved make.

[29] Wall painting (two coats) with plastic emulsion paint of approved 175.70 Sqm 84.81

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

smooth.smooth.

[30] Painting (Bala Painting) undecorated wall surface to give an even 33.00 Sqm 407.03

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth. on

walls shade and pattern as directed by Architect and Authority.

Description of Item Quantity Unit Rate In figures Amount

[31] Providing laying and jointing in true line and level 15mm dia. 15.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[32] Providing laying and jointing in true line and level 25mm dia. 34.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[33] Providing laying and jointing in true line and level 50mm dia. 18.00 Rmt 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[34] Providing, laying and jointing in true line and level 110 diametre 16.70 Rmt 897.78

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

[35] Provision and fixing water closet squatting orissa type W.c. pan 1.00 Each 1390.30

size 580mm integral footrest and 100 mm P or S trap and in

cluding 25 mm dia CP brass flush valve and GI inle connection etc.

comp. (A) Vitreous china long pattern white or color.

[36] Providing and fixing wash basin with pedestal of std. Height with 1.00 Each 1883.95

single hole for pillar tap with C.I or M.S brackets painted white

including cutting holes and making goods the same including. C.P.

brass waste Couplin, and waste pipes and bottel trap (A) Vitreous

china. (ll) Flat back washbasin 550 mm x 400 mm size (1) in

[37] Providing and fixing Gun metal check or non return fullway wheel 1.00 Each 186.83

valve.(A) 15mm dia.

[38] Providing and fixing in position cowel went to pipes.(C) 100mm 3.00 Each 500.17

[39] Providing and fixing screw down bib taps of following size.(B) 3.00 Each 186.83

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

[40] Providing and fixing Gun metal check or non-return fullway 1.00 Each 420.63

wheel valve.(C) 25mm dia.

[41] Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 1.00 Each 600.23

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Description of Item Quantity Unit Rate In figures Amount

[42] Providing & Fixing S.W. Gully trap with C.I. Greating brick 2.00 Each 1246.92

masonay chamber and water tight C..I Cover with frame of

mm X 300 mm Size ( Indian ) with standard weight (i) Square

mouth traps (C) 150 mm x100 mm size P or R Type.

[43] Providing erecting and fixing double coated ISI water tank of 1000.00 Liter 3.95

required capacity each with all necessary fittings and connection

etc. complete on terrace.

[44] Providing , Painting ,Lettering Nandghar Logo Board As Pe Design 1.00 Each 1515.00

Specified And Providing Two Direction Side Of the Building

Photograph Copies -4 Of Each In Postcard size og the Completed

Work As Directed 23Cm x 45 Cm.

[45] Constructing brick masonry chamber for underground C.I. 2.00 Each 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe

[46] Providing and Fixing FIRE EXTINGUISHER 6 KG ABC including 2.00 No 2550.25

cost of labour complete with providing 1 year guarantee for each

bottle including testing and comissioning.

[47] Providing and fixing M.S. grills/ Railing/ Main Gate/MS ladder 575.20 Kg 112.79

of required pattern to M.S. frames of windows ,Door , Jali etc.

with M.S. flats at required spacings and frame alround, square

or round Bright bars of 12mm dia, with round headed bolts

and nuts or by screws including all Fixture etc complete as

directed by Engineer in charge

[48] Providing sock pit of 5.00 Cu.M. Volume including excavating and 1.00 Each 3486.88

filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in

C.M. 1:3 with finishing curing etc. complete as directed.

[49] Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 10.00 Point 465.61

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall

/ ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected oncealed in wall/ceiling complete

Description of Item Quantity Unit Rate In figures Amount

[50] Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 4.00 Point 654.48

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall

/ ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling completeCat- II

[51] Point wiring for on board Looped Plug with 6A Modular type 2.00 Point 236.34

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories Cat- II

[52] Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 2.00 Point 493.89

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

db board (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling

[53] Supplying and erecting LED indoor fittings with LEDs of wattage 8.00 No 238.36

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Belowdescription have shown ranges of Wattage capacity of LED

capacitybetween the ranges shown.) (A) Tube Light with integral

driver (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

[54] Providing & erecting open well type horizontal mono block pump 1.00 No 9362.70

set with stainless steel body having following specification (A)

H.P. single phase open well motor pump set having discharge of

115 LPM @ 15 mtr. head suitable for 32 mm dia.delivery pipe

with control panel

[55] providing and erecting Miniature circuit breaker single pole 6A to 1.00 No 91.91

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-ll

[56] Providing & erecting 240 V MCB double pole switch for lighting 1.00 No 278.76

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

Description of Item Quantity Unit Rate In figures Amount

[57] Providing and erecting Sheet Steel powder coated MCB 1.00 No 1492.78

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-43) (iv) 12 Way

[58] Providing and erecting Approved make Ceiling fan with double 3.00 No 1596.81

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm.

sweep complete, canopy erected on existing hook or clamp with

earthing. [Make shall be approved by Engineer in charge]

[59] Providing and Erecting following Shock Proof Tissino Type 2.00 No 219.17

accessories erected on 3 mm thick PC (Polycarbonate) Sheet in

PVC / Metal Box erected on Wall / Ceiling. (14) Electronic Hum

Free EME Socket Type Step Fan Regulator.

[60] Supplying Erecting Aproved make Bracket Fan of ISI Mark with 1.00 No 2105.85

230 Volt A.C., 50 Cy/S 400/450 mm Sweep complete on Wall or

With lead cores and connections complete. (Make shall be

Approved by Engineer in Charge)Category II.

[61] Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr 1.00 No 994.85

long 'B' grade G.I. pipe with necessary coupling buch buried in

specially prepared earth pit & G.I. earth wire of 8 SWG erected &

connected as directed. For using salt and charcoal / coke as

required for pipe type earthing

[62] Mains with 1.1 KV FRLS PVC insulated ISI Marked Standard 30.00 Rmt 62.62

Copper Conductor wire in following Type of Pipe to be erected

Concealed in / Flushed on Wall / Ceiling with 1.5 Sq.mm Copper

Conductor FRLS PVC Insulated Standered wire of Green Colour

for Earth continuity of following size. (A) With Medium Class

Rigid PVC Pipe and Accessories. (a) 2 wire 1.5 Sq.mm.

[63] Providing and fixing 600mm x 450mm bevelled edge mirrror of 1.00 No 859.41

superior glass mounted on 6mm thick A.C. sheet or plywood

sheet and fixing to wooden pluge with C.P. brass screws and

[64] Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 9.00 Sqm 707.55

concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete

[65] Providing and Placing IT wood writing table having size 1.50 X 1.00 No 15150.00

0.75 X 0.75 mt with one side drawer with using of 19mm thick

WP wood, top cover with 1 mm thick wood type Formica

including using of all necessary material & labour etc completed

as directed by Engineer incharge

[66] Providing and Fixing pin cushion display board having size 1.20 X 1.00 No 808.00

0.75 mt including using of alluminum section frame, 18mm thick

WB plywood, nevy blue Cushion cloth pin etc completed as

directed by Engineer Incharge.

[67] Providing and fixing of hook of 10mm or 12mm dia including 1.00 No 303.00

drilling hole, fixing of male- female thrade fastner sealing the

same with appoxy compound, finishing the same etc complete as

directed by Engineer incharge.

Description of Item Quantity Unit Rate In figures Amount

[68] Providing and fixing medical device & equipment standio meter 1.00 No 1414.00

height measuring scale 2.10mt long including fixing in wall with

using of all heavy SS screw, rail etc complete as directed by

Engineer incharge.

[69] Providing and fixing Pre writing board having size 30cm X 20cm 13.00 No 404.00

with decorative acralic border etc completed as directed by

Engineer incharge.

[70] Providing and supplying standard PVC (Polyvinyl chloride) Chair 3.00 No 1010.00

with handle of approved design and make as directed by Engineer

[71] Providing and supplying standard PVC (Polyvinyl chloride) Stool 3.00 No 606.00

having size 3.75 X 0.60 X 0.45mtr of approved make as directed

by Engineer incharge.

[72] Supplying & erecting approved LED TV 32Inch ,230V,Resolution: 1.00 No 23230.00

4K Ultra HD (3840 x 2160) | Refresh Rate: 60 hertz,1 TV Unit,

Remote, 2 Table Stand, 1 User Manual, 2 Batteries,1 Warranty

Card Connectivity Technology Wi-Fi, USB, Ethernet, HD

Connectivity: 3 HDMI ports to connect set top box (1HDMI port

eARC supported) | 2 USB ports to connect hard drives and other

USB devices | Built- in WiFi | Bluetooth | Ethernet RJ45 |

earphone Jack | 1 Optical digital audio output (SPDIF) | 1 RF-

Radio frequency input | 1 AV input Sound: 24W Audio Output |

Dobly Atmos | Audio equalizer | Dolby Digital | Lip-sync

adjustment | Sound mode:Standard, Theatre, Sports, Music,

Speech, Late Night Smart TV Features: Google TV | Google

Assistant | Voice command | Screen mirroring: DLNA,

Chromecast, Miracast, AirPlay | Sleep Timer | On/Off Timer |

Supported Apps: Netflix, YouTube, Prime Video, Hotstar, SonyLiv,

Hungama, JioCinema, Zee5, Eros Now Display: 178 drgrees wide

viewing angle | VRR | ALLM | MEMC | HDR 10 | HLG | Dolby

Vision | Multiple picture modes

supported:Dynamic，Standard，Sports，PC/Game，Energy

Saving，Cinema，FILMMAKER MODE Warranty Information:

Year Comprehensive Warranty on product provided by Toshiba

from date of purchase

[73] Supplying & erecting 5 stage single reverse osmosis water 1.00 No 9595.00

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention with 40 psi

inline type post carbon filter auto low & high pressure switches

with following size of storage tank & LPH capacity & erected as

[A] 10 Ltr / Hr with 7 Ltr StorageTank

[74] Providing and fixing PVC modular kitchen cabinet consisting of 2.40 Sqm 7575.00

base and wall units, made from high quality rigid PVC boards

(minimum 15-18 mm thick), including shutters, shelves, drawers,

SS hinges, telescopic channels, handles, magnetic locks, necessary

fittings, cutting, fixing, complete as per design and direction of

[75] Providing and Fixing SS 304 Foldable Checking bed having size 1.00 No 6060.00

1.50 X 0.60 X 0.75 mm including using of 25mm dia pipe, SS 2mm

thick, matter of 25.4 (1") of 40 density, cover with regine cloth of

approved quality etc completed as directed by Engineer

[76] Providing and fixing Fabric cloth Curtain having length 1.8 mtr 2.70 Rmt 858.50

for covering of checking area including using of alluminum

sliding channel etc complete as directed by by Engineer lncharge.

Description of Item Quantity Unit Rate In figures Amount

[77] Providing and Fixing of SS 304 Hanger for bag including using all 10.00 No 252.50

necessary materials like SS rail, screw etc completed as directed

by Engineer lncharge.

[78] Providing and laying cement concrete 1:3:6 (1- Cement : 3- 0.40 Cum 4172.46

Coarse sand : 6- crushed stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Wall Caps

Total :

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the

estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated Amount put to tender Estimated Amount put to tender

Deduct …............................. % Below Add …............................. % Above

In Words In Words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

5. Dismentalling of Credit materials amounting of Rs. 0.00 must be recovered from Contractor's respective R.A. Bill.

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R & B) Sub Division Panchayat (R & B) Division

Mahuva Bhavnagar