Balance work for construction Upgradation of Helipad with VIP Room at forward post 200KM from BHQ of 14 Bn ITBP Pithoragarh UKD

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, disposal earth to be levelled and neatly dressed as directed by Engineer-in-charge. All Kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying plum concrete with 60% cement concrete 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) and 40% plums using boulders size 150mm to 200mm) in breast wall /toe wall/Retaining wall excluding cost of shutter

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and filling in position, blown bitumen in expansion joints.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, disposal earth to be levelled and neatly dressed as directed by Engineer-in-charge. Ordinary Rock

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of shuttering: Cement OPC 43 Grade conforming to IS No: 8112-1989 brand like CCI, ACC, Ultratech, Ambuja, Binani only

Providing and laying plum concrete with 60% cement concrete 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) and 40% plums using boulders size 150mm to 200mm) in breast wall /toe wall/Retaining wall excluding cost of shutter

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete :1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. MS bar deformed TMT Bars conforming to IS 1786-1985 of make Tata. Amba, tiscon, Paras, Rhino Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Thickness of shutters should be 35mm )- First class local wood(Tita Champa/pine/deodar/shisham)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : First class local wood(Tita Champa/pine) i) Local wood panels should be fixed with grooves but additional beading should be provided on both sides, stiles, rails and panels in door shutters shall be of same species of timber ii) Lock rail of door shutters shall be so placed that its centerline is at a height of 850+55mm from bottom of shutters, each door shall be fixed to frame with three hinges one at the centre and other two at 200 mm from top and bottom of shutters. iii) All door shutters shall be finished smooth with well planned faces and panels of shutters shall be flat and well sanded to a smooth and level surface. iv) In case of double leaved shutters the meeting of the stiles shall be rebated either splayed or square type.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: First class local wood(deodar/shisham)-35 mm thick

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. First class local wood(deodar/shisham)

Providing and fixing 35mm wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.83 mm, for doors, windows and clerestory windows with black enamelled ISI mark butt hinges and necessary screws : First class local wood - 35mm thick

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :12 mm thick

Providing and fixing wooden beading with iron screws and priming coat on unexposed surface complete . First class local wood (deodar/shushm)-50x12mm.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats and round bars complete. (i) MS flate 20x5mm section for frame

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.63 mm ( + 0.05 %), total coated thickness with zinc coating 120 gsm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.63 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.63 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter .(600 mm over all girth).

Providing and fixing Anodized aluminium sliding bolts with nut and screws 250x16 confirming to IS 2681-1979 of brand Classic/EPSA ISI/ DECOR/VENUS/Adersh/ Crown ( anodic coating not less than grade AC 10 as per IS : 1868) 250x16mm.

Providing and fixing anodised aluminium tower bolts 200x10 mm confirming to IS 204 of brand confirming to IS 2681-1979 of brand Classic/EPSA ISI/ DECOR/VENUS/Adersh/ Crown ( anodic coating not less than grade AC 10 as per IS : 1868).

Providing and fixing anodized aluminium handles 125mm IS 208 of brand Classic/EPSA ISI/ DECOR/VENUS/Adersh/ Crown ( anodic coating not less than grade AC 10 as per IS : 1868).

Providing and fixing G.I. pipes medium class make TATA, Jindal , Hisser, JST, Surya with G.I. fitting of unik and intillo techsupport claimp U-clamp of size 23x1x2.5mm of chilly incl. cutting and making good the wall etc (Internal work) Exposted on wall 15mm dia nominal bore.

Providing and fixing C.P. brass long body bib cock 15 mm dia of make Parko/ Kingstone/ Essco confirming to IS: 8931

Providing and fixing C.P. brass stop cock 15 mm dia ( concealed) of make Parko/ Kingstone/ Essco confirming to IS: 8931

Providing and fixing C.P. brass angle valve for basin mixer and geyser point 15mm dia of make Parko/ Kingstone/ Essco confirming to IS: 8931

Providing and fixing white vitreous china pedestal type water closet (Indian type wc pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern with manually of make Hindware, periware/ Cera- standard quality with fitting and CI/MS brackets, standerd make and confirming to IS: 7231 with fitting and fixers complete including cutting and making good the walls and floor wherever required

Providing and fixing wash basin make Hindware, Perryware, Cera standard quality size 550x400mm with C.I./MS brackets, 15 mm C.P. brass pillar taps, L&K, Kingston, Renutrol, Hansa 32 mm C.P. brass waste of L&K, kingston, Renutrol, Hansa , including painting of fittings and brackets, cutting and making good the walls wherever require :

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

Providing and fixing soil, waste and vent pipes : 100 mm dia of hard drawn PVC make 100 mm dia hard drawn PVC pipe C

Providing and fixing soil, waste and vent pipes : 75 mm dia of hard drawn PVC make 75 mm dia hard drawn PVC pipe C

Constructing stone masonry man hole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) mix, inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Cement brand.

Constructing masonry chamber for underground C.I. inspection chamber with stone work in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame 455x610 mm internal dimensions, total weight of cover not less than 38.00 kg(weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10graded stone aggregate 40 mm nominal size) mix, inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making a chanels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with as floating coat of neat cement as per standard design cement brand CCI, ACC Ultratech, Vinay, Star, JP, Ambuja, Binani only, Inside dimensions 455x610 mm and depth 45 cm for pipe line with one :

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and applying plastering on walls 12 mm thick of mix 1:6 (1cement: 6 coarse sand)

Distempering with oil bound washable distemper of brand Asian, berger, Nerolac, Shalimar Tractor to give and even shade over new work two or more coats and including priming coat of cement primer .

Finishing walls with Acrylic Smooth exterior paint of APEX, Asian, Berger, Nerolac, Shalimar of required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Applying priming coat : With ready mixed pink or Grey primer of Asian, Jonson & Nicolson, Nerolac

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth .Cement brand CCI, ACC, Ultratech, vinay, Star, JP, Ambuja

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, electroplast, Star, Lotus or equivalent having valid ISI licease

12 mm cement plaster Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a neet cement floating coat including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Copper cercuit/submain Wiring in PVC condute (PVC condute shall be of supreme brand) wiring for submain wiring with 2x2.5 mm² FRLS PVC insulated, copper conductor, single core cable make L&T, Rallision, Havells, in recesed steel conduit as required with specification like maximum 4 nos of wires in one conduit to 20mm dia, green/ yellow copper earth wire to come to switch box, black insulated copper wire for neutral also to come to switch box and for one core cable red PVC insulated copper wire should be used whereas core cable red and blue PVC copper wire to be used, steel conduit should be fixed with respective size of Intillo Tech Support clamp of chilly fixed with screw of make Nettle fold/Amul/ Magnum including steel conduit fittings make Steel mark/AKG/BECx2.5 sqmm

2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.3.1 6/8 way, Double door

2.12 Supplying and fixing following rating, double pole, 240 volts, isolator in the existin MCB DB complete with connections, testing and commissioning etc. as required. 2.12.1 40/63 amps

Supplying and fixing Head light complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 watt Led Batten 4feet complete with connections, testing and commissioning etc. as required.

Supplying and fixing 18 watt Led Batten 2 feet complete with connections, testing and commissioning etc. as required.

Supplying and fixing 9watt Led Bulb complete with connections, testing and commissioning etc. as required.

Providing and fixing exhaust fan 450mm ISI marked .Dual side air direction REVERSIBLE Fresh air Metal Exhaust fan 1400rpm high speed (Metallic grey/White),single phase.