Electrical Lighting Facade work at Tower of Liberty (Aerodrum Chouraha) and Kirti Stambh, Kota

SITC of Circular shape architectural RGBW LED flood light with integral driver & housing made of Die-cast aluminium alloy - ADC12. The luminaire shall be no bigger than Ø 225 X 162 (±10%) without bracket. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of coldrolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The nominal weight of the luminaire shall be 6KG (±10%). The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 3.5/10/15/30/45/60-degree beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤3. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with IP67 connectors. The luminaire shall have system wattage not exceeding 80W and Minimum System Efficacy >50lm/W for RGBW & >70lm/W for mono oplour options and High Power Discrete LEDs not in 4 in 1 . Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The luminaire shall be capable of digital dimming of 65536 steps. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables.Fixture controller ,power supply,addressing kit,splitter & booster,leader and jumper cable should be of same manufacturer. Makes :- Klite, Philips, Eurolite, and Make is to be approved by department incharge. Quality test report from NABL approved labs / in house NABL approved labs will be submitted by Contractor.

SITC of Circular shape architectural RGBW LED flood light with integral driver & housing made of Die-cast aluminium alloy - ADC12. The luminaire shall be no bigger than Ø 225 X 225 (±10%) without bracket. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of coldrolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The nominal weight of the luminaire shall be 8KG (±10%). The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 3.5/10/15/30/45/60-degree beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤3. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with IP67 connectors. The luminaire shall have system wattage not exceeding 150W and Minimum System Efficacy >50lm/W for RGBW & >70lm/W for mono oplour options and High Power Discrete LEDs not in 4 in 1 . Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The luminaire shall be capable of digital dimming of 65536 steps. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate.The luminaire shall be supplied with necessary connectors for connecting lead/jump cables.Fixture controller ,power supply,addressing kit,splitter & booster,leader and jumper cable should be of same manufacturer. Makes :- Klite, Philips, Eurolite, and Make is to be approved by department incharge. Quality test report from NABL approved labs / in house NABL approved labs will be submitted by Contractor.

Supply, Installation, Testing and Commissioning of Signal Amplifier to boost the Signal, module to enhance the depleting DMX Signals, should It should be offered with inbuilt electronic circuit for functioning. Make custom

Supply, installation, testing and commissioning of lighting control cable (DMX cable ) with exceptional durability and flexible construction .Cable to meet Visit standards for DMX 512. Cable to be all weather proof , extra flexible jacket material that are tough & abrasion resistant .Cable to be properly terminated / connected using standard connectos . Make :- Belden/Max and make is to be approved by department

Supply ,Installation testing and commissioning of DMX controllers,mounted in outdoor IP rated enclosure . Controller should be able to control the drivers as per color design theme. The enclosure should have power supply , dmx controller, ethernet control connectivity , (Ethernet/ KNX) digital output with complete programming and software for control as required complete in all respect.. Make :- Madrix/Ltech/ABB and make is to be approved by department

SITC of constant power mode supply having 100-350V AC input with protection of over current, short circuit, overvoltage, input over voltage and over temperature suitable to switch ON set of LED lights as per requirement. IP 65 Rated 75W Make: Meanwell/Osram/Ltech

Testing & programming of RGB lighting system which includes custom scene , light sequence creation color effect setup and site integration as per approved design and direction of Engineer incharge .

4 core*10 sqmm