Construction of Civil Hydro-Mechanical and Electro-Mechanical works of Tiuni-Plasu HEP (72 MW) on River Tons in District Dehradun of Uttarakhand.

1. CARE AND DIVERSION OF RIVER /As per Technical Specification (SECTION B.8)

1.1 Design and Construction of Coffer Dams along with maintainence, seepage control measures and dewatering etc. including cost of all materials, machinery, labour, complete in all respect as required for the construction of barrage and intake structure /As per Technical Specification and tender drawings(8.1 to 8.7)/As per tender Drawing number -TP-ujvnl-shbh-bid-RD-102/103.

2. OPEN/SURFACE EXCAVATION AT BARRAGE AND INTAKE AREA (Including cost of dewatering) /As per Technical Specification (SECTION B.2)

11.3.2) Using Micro-by-Ultrafine Cement

itemH1Code30

2.3) Dental Excavation /As per Technical Specification (2.3.3/2.4.5/2.10.1/2.10.7)

3. ROCK SUPPORTS /As per Technical Specification (SECTION B.4)

3.1) Rock anchors(25 mm dia ) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

3.1.1 Length up to 6 m

3.1.2 Length more than 6 m

3.2) Rock anchors (32mm dia.) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

3.2.1 Length up to 6 m

3.2.2 Length more than 6 m

3.3) Rock bolts ( Resin end anchorage and cement grouted) 25mm dia including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

3.3.1 Length up to 6 m

3.3.2 Length more than 6 m

3.4) Rock bolts (Resin end anchorage and cement grouted) 32mm dia including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

3.4.1 Length up to 6 m

3.4.2 Length more than 6 m

3.5) Rock Bolt / Rock Anchor Extensions into Concrete (4.5.7/4.10.2)

3.6) Self Drilling Anchor R25 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.8/4.10.1/4.10.2)

3.6.1 Length up to 6 m

3.6.2 Length more than 6 m

3.7) Self Drilling Anchor R32 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.8/4.10.1/4.10.2)

3.7.1 Length up to 6 m

3.7.2 Length more than 6 m

3.8) Chain link fabric /As per Technical Specification (4.7.1/4.10.4.1)

3.9) Welded wire mesh /As per Technical Specification (4.7.2/4.10.4.2)

Supply, installation and monnitoring by PC pressure cells

Supply, installation and monnitoring by Piezometer

itemH1Code296

4.1) Plain shotcrete /As per Technical Specification(5.1 to 5.17)

4.2) Steel fibre reinforced shotcrete (SFRS) including steel fibre /As per Technical Specification (5.1 to 5.17)

Supply, installation and monnitoring by SM Vibrating wire strain gauge

5. FILL,BACKFILL,RIPRAP AND PITCHING/As per Technical Specification (SECTION B.6)

5.1) Random backfill including cost of backfill materials,labour and T&P complete in all respect As per Technical Specification (6.3/6.10/6.11)

5.2) Compacted backfill including cost of backfill materials,labour and T&P complete in all respect As per Technical Specification (6.3/6.10/6.11)

5.3) Free-Draining backfill including cost of backfill materials,labour and T&P complete in all respect As per Technical Specification (6.2/6.10/6.11)

5.4) Graded/ Inverted Filter including cost of backfill materials,labour and T&P complete in all respect As per Technical Specification (6.5/6

5.5) Stone pitching /As per Technical Specification (6.6/6.10/6.11)

6. DRILLING AND GROUTING /As per Technical Specification (SECTION B.-7)

6.1) Drilling for Contact/consolidation grouting including labour and T&P complete in all respect/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

6.2) Grouting operation for contact/consolidation grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

Erection, Testing & Commissioning ofStop log units of vertical fixed wheel type gate for a clear opening size of 15 m (W) x 20.3 m consists of 11 units/panels (nine interchangeable units & one non-interchangeable top and bottom unit) complete with downstream skin plate, stiffeners, horizontal girders, end vertical girders, roller, guide rollers, lifting & latching arrangement, filling valves in top unit, etc. as per scope of work and technical specifications.

Second stage embedded parts such as sill beam, slide/wheel tracks & side seal seats, side guides, top seal seat, anchor bolts, nuts & washers, support angles, latching and storage arrangement over the piers and embedded parts and ladder for storage pit with steel grating etc. as per scope of work and technical specifications.

6.3) Grouting materials for consolidation including cost of cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.1/7.9.6) (1 Bag = 50kg of Cement)

6.4) Drilling for curtain grouting including labour and T&P complete in all respect /As per Technical Specification(7.8.2.1/7.8.4.6/7.9.7)

6.5) Grouting operation for curtain grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.8.4.6/7.9.7)

PACKAGE-II HM WORK PRICE SCHEDULE-4 (Recommended parts ) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

3.3)Colcrete (Cement mor

6.6) Grouting materials for Curtain grouting incuding cost cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.7) (1 Bag = 50kg of Cement)

6.7) Drilling of drainage hole/probe hole 76mm dia. /As per Technical Specification (7.8.2.1/7.9.9)

6.8) Perforated PVC pipes 50mm dia in drainage holes /As per Technical Specification (7.9.9)

6.9) Drilling of Exploratory Holes / Instrumentation/ Check holes etc. /As per Technical Specification (7.8.2.2)

6.9.1 Drilling Nx/Hx size exploratory hole with core recovery /As per Technical Specification (7.8.2.2/7.9.10)

6.9.2 Drilling Nx/Hx size exploratory hole without core recovery /As per Technical Specification (7.8.2.2/7.9.10)

6.10) Embedded pipes & fittings /As per Technical Specification (7.4.4/7.9.13)

6.11) Water pressure test/Lugeon Test as per IS:6066 /As per Technical Specification (7.8.3/7.4.3/7.9.12)

7. CONCRETE IN BARRAGE AND INTAKE AREA INCLUDING FOUNDATION (including cost of dewatering,formwork ,cement,sand,admixtures,micro/ultra fine cement, air entraining agent and bentonite as per design mix etc.)/As per Technical Specification (SECTION B.9)

7.1) Concrete of grade M15/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.2) Concrete of grade M15/A20/As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.3) Concreting of grade M20/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.4) Concrete of grade M20/ A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.5) Concrete of grade M25 /A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.6) Concrete of grade M25 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

Per Cubic/Km

7.7) Concrete of grade M35 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.16.10/9.17.1/9.17.7)

7.9) Porous concrete /As per Technical Specification (9.16.14/9.17.1/9.17.16)

7.10) Plums(stone) in concrete including cost of stones,labour and T&P but excluding cost of concrete as per design mix /As per Technical Specification (9.17.15)

8. REINFORCING STEEL /As per Technical Specification (SECTION B.11)

8.1) Providing, fabricating and placing in position HYSD reinforcement steel for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, binding with 1.25mm diameter annealed steel wire, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts. /As per Technical Specification (11/11.12)

8.2) Providing and fixing Couplers of 32mm dia and more including cost of all materials,labour,T&P etc for proper completion of work/As per Technical Specification (11.7/11.12)

9. WATERSTOPS AND JOINTS /As per Technical Specification (SECTION B.12)

9.1) PVC water stops 300mm wide /As per Technical Specification (12.5.1/12.7)

9.2) PVC water stops 150mm wide /As per Technical Specification (12.5.1/12.7)

9.3) Bituminous coating /As per Technical Specification (12.5.5/12.7)

10. METAL WORKS /As per Technical Specification (SECTION B.13)

10.1) Providing and fixing G.I Pipe up to 100mm dia including cost of all materials,labour,T&P etc for proper completion of work /As per Technical Specification (13.5.2/13.9.1/13.9.2)

2.1.4) Removal of tunnel excavation caused by Geological Over breaks

12.1) Gabions/Wire crate/MSME wall with boulders filling /As per Technical Specification (16.3/16.8.2/16.8.3)

10.2) Providing and fixing G.I Pipe above 100mm dia including cost of all materials,labour,T&P etc for proper completion of work/As per Technical Specification (13.5.2/13.9.1/13.9.2)

10.5) Embedded Metal Works, Miscellaneous steel sections including frames, gratings, covers,climbing irons (rungs), etc /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

10.6) Hand rails/Railing /Ladders /As per Technical Specification (13.7.4/13.7.5/13.7.6/13.9.5/13.9.6)

10.7) Erection of Metal works supplied by others /As per Technical Specification (13.8/13.9.10)

PACKAGE-1 CIVIL WORK PART A (BARRAGE AND INTAKE) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

10.8) Supply and Erection of MS Earthing bar/flat and risers /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

11. MISCELLANEOUS AND ANCILLARY WORKS, SLOPE PROTECTION (Section B15 & B16)

11.1) Gabions /wire crate with boulders filling including all materials As per Technical Specification (16.3/16.8.2/16.8.3)

11.2) PVC pipes including all labour and T&P required for proper completion /As per Technical Specification (15.5/15.7.5)

11.2.1 75mm nominal dia. /As per Technical Specification (15.5/15.7.5)

11.2.2 100mm nominal dia./As per Technical Specification (15.5/15.7.5)

11.2.3 150mm nominal dia./As per Technical Specification (15.5/15.7.5)

11.3) Random rubble masonry (wet) /As per Technical Specification (16.4.1/16.8.4)

11.4) Random rubble masonry (dry) /As per Technical Specification (16.4.1/16.8.4)

12. PERMEATION GROUTING (SEEPAGE CUT-OFF WORKS) /As per Technical Specification (SECTION B.19)

12.1) Drilling 136-172 mm dia holes by rotary/odex/percussion drilling including cost of all materials,labour,T&P etc for proper completion of work /As per Technical Specification Item (19.4.4/19.5.1)

12.2) Supply and installation of TAM pipe/perforated grout casing pipe of internal dia 45-65 mm including cost of bentonite,materials,labour,T&P etc for proper completion of work./As per Technical Specification (19.4.8/19.5.1)

tar 1:3)/As per Technical Specification (6.8/6.10/6.11)

Placing in position of sand bags including supplying sand and filling the same in empty bags and tying with contractors binding wire, leading to tunnel site with contractors men, material, consumables, tools and plants, equipments, machIneries, including all lead and lift, loading, unloading etc. complete.(filling sand bag of weight 50 Kg shall be counted as 01 number)

12.3) Permeation Grouting to attain the desired lugeon value including cost of cement,sand,ultra fine cement, sodium silicate, Bentonite,admixtures,all labour,equipment,T&P etc but excluding cost of drilling,cost of TAM pipe and shifting operation cost of equipments(1 Bag = 50kg of Cement)./ As per Technical Specification (19.4.7/19.5.1)

BoQ_Ver4.0

itemH1Code298

itemH1Code297

Name of the Bidder/ Bidding Firm / Company :

Installation and Other Services as per specifications and scope defined in Chapter 3 of Section IX- (PTS)

NUMBER #

12.4) Grouting operation for permeation grouting (Shifting of Equipments)/As per Technical Specification (19.4.8/19.4.9/19.5.1)

5.6.1) Using Cement , sand & admixtures

5.6.2) Using Micro-by-Ultrafine Cement

1. OPEN/SURFACE EXCAVATION (Including cost of dewatering)/As per Technical Specification (SECTION B.2 )

2. UNDER GROUND EXCAVATION In all classes of rocks /As per Technical Specification (SECTION B.3 )

Removal of sand bags, when not required and disposal thereof with contractors men, material, consumables, tools and plants, equipments, machineries, including all lead and lift, loading, unloading etc. complete.(filling sand bag of weight 50 Kg shall be counted as 01 number)

Fixing of anchor bars with contractors men, material, consumables,tools and plants,equipments, machnieries , including all lead and lift, loading , unloading etc. complete.(Weight shall be calculated by material volume X denisty of MS steel 7850 kg/m³)

12.1.1) Using Gabion/Wire Crate

Stop log units of vertical fixed wheel type gate for a clear opening size of 15 m (W) x 20.3 m consists of 11 units/panels (nine interchangeable units & one non-interchangeable top and bottom unit) complete with downstream skin plate, stiffeners, horizontal girders, end vertical girders, roller, guide rollers, lifting & latching arrangement, filling valves in top unit, etc. as per scope of work and technical specifications.

2.1) Adits, HRT, Pressure shaft,surge shaft in all classes of Rock/As per Technical Specification (3.8.1/3.8.2/3.15.1/3.15.2/3.15.3)

3. ROCK SUPPORTS FOR OPEN/SURFACE WORKS /As per Technical Specification (SECTION B.4 )

3.1.1 Length up to 6 m

3.1.2 Length more than 6 m

3.1 ) Rock anchors (25mm dia.)cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

3.2.1 Length up to 6 m

3.2.2 Length more than 6 m

3.3) Rock bolts ( Resin end anchorage and cement grouted) 25mm dia including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

3.3.1 Length up to 6 m

3.3.2 Length more than 6 m

3.4) Rock bolts (Resin end anchorage and cement grouted) 32mm dia including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

3.4.1 Length up to 6 m

3.4.2 Length more than 6 m

3.5) Rock Bolt / Rock Anchor Extensions into Concrete (4.5.7/4.10.2)

3.2) Rock anchors (32mm dia.)cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

3.6.1 Length up to 6 m

3.6.2 Length more than 6 m

3.6) Self Drilling Anchor R25 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.8/4.10.1/4.10.2)

3.7.1 Length up to 6 m

3.7.2 Length more than 6 m

3.8) Chain link fabric /As per Technical Specification (4.7.1/4.10.4.1)

3.9) Welded wire mesh /As per Technical Specification (4.7.2/4.10.4.2)

3.7) Self Drilling Anchor R32 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.8/4.10.1/4.10.2)

4. ROCK SUPPORTS FOR UNDERGROUND WORKS /As per Technical Specification (SECTION B.4 )

4.1) Rock anchors (25mm dia.) cement grouted including co

st of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.2/4.10.1/4.10.2)

4.1.1 Length up to 6 m

4.1.2 Length more than 6 m

4.2) Rock anchors (32 mm dia.) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.2/4.10.1/4.10.2)

4.2.1 Length up to 6 m

4.2.2 Length more than 6 m

4.3) Rock bolts(25mm dia)( Resin end anchorage and cement grouted) .including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.3/4.10.1/4.10.2)

4.3.1 Length up to 6 m

4.3.2 Length more than 6 m

4.4) Rock bolts(32mm dia)( Resin end anchorage and cement grouted) .including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.3/4.10.1/4.10.2)

4.4.1 Length up to 6 m

4.4.2 Length more than 6 m

4.5) Rock Bolt / Rock Anchor Extensions into Concrete (4.5.7/4.10.2)

4.6) Self Drilling Anchor R25 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.8/4.10.1/4.10.2)

4.6.1 Length up to 6 m

4.6.2 Length more than 6 m

4.7) Self Drilling Anchor R32 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.8/4.10.1/4.10.2)

4.7.1 Length up to 6 m

4.7.2 Length more than 6 m

4.8) Chain link fabric /As per Technical Specification (4.7.1/4.10.4.1)

4.9) Welded wire mesh /As per Technical Specification (4.7.2/4.10.4.2)

4.10) Permanent Steel support in Adits,HRT,Surge shaft, Pressure shaft and all type of underground works /As per Technical Specification (4.8/4.10.5.1)-Steel Ribs

4.11) Lattice Girders /As per Technical Specification (4.8.2/4.10.5.1)

4.12) Steel Lagging/As per Technical Specification (4.8.4/4.10.5.2)

4.13) Precast Reinforced Concrete lagging /As per Technical Specification (4.8.4/4.10.5.2)

Recommended Spare part 95

Recommended Spare part 96

HRT Instrumentation/As per Technical Specification (SECTION B.17)

Recommended Spare part 100

4.14) Forepoling using Reinforcement Bars/As per Technical Specification (4.9.1/4.10.6)

4.15) Pipe Roofing using Reinforcement Bars and Structural Steel/As per Technical Specification (4.9.2/4.10.6.3)

5. SHOTCRETE/As per Technical Specification (B.5)

5.1) OPEN/SURFACE WORKS

5.1.1) Plain shotcrete /As per Technical Specification(5.1 to 5.17)

5.1.2) Steel fibre reinforced shotcrete (SFRS) including steel fibre /As per Technical Specification (5.1 to 5.17)

5.2) UNDERGROUND WORKS

5.2.1) Plain shotcrete /As per Technical Specification(5.1 to 5.17)

5.2.2) Steel fibre reinforced shotcrete (SFRS) /As per Technical Specification (5.1 to 5.17)

6. FILL,BACKFILL,RIPRAP AND PITCHING/As per Technical Specification (SECTION B.6)

6.1) Random backfill including cost of backfill materials,labour and T&P complete in all respect/As per Technical Specification (6.3/6.10/6.11)

6.3) Stone pitching /As per Technical Specification (6.6/6.10/6.11)

7. DRILLING AND GROUTING /As per Technical Specification (SECTION B.-7)

7.1) Drilling for Contact/consolidation grouting including labour and T&P complete in all respect/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

2.2) Extra for lead for disposal of tunnel muck beyond 6 km measured from portal

6.3.1) Using Cement , sand & admixtures

7.2) Grouting operation for contact/consolidation grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

7.3) Grouting materials for consolidation including cost of cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.1/7.9.6) (1 Bag = 50kg of Cement)

7.4) Drilling of drainage hole/probe hole 76mm dia. /As per Technical Specification (7.8.2.1/7.9.9)

7.5) Drilling of drainage hole/probe hole 38mm dia. /As per Technical Specification (7.8.2.1/7.9.9)

7.6) Perforated PVC pipes 50mm dia. for drainage

7.7) Drilling of Exploratory Holes / Instrumentation/ Check holes etc. /As per Technical Specification (7.8.2.2)

7.7.1) Drilling Nx/Hx size exploratory hole with core recovery /As per Technical Specification (7.8.2.2/7.9.10)

7.7.2) Drilling Nx/Hx size exploratory hole without core recovery /As per Technical Specification (7.8.2.2/7.9.10)

7.7.3) Embedded pipes & fittings /As per Technical Specification (7.4.4/7.9.13)

8. CONCRETE WORK in lining of Tunnels, Shaft, Galleries , backfill concrete , second stage work etc(including cost of dewatering,formwork ,cement,sand,admixtures,micro/ultra fine cement, air entraining agent,Super plasticizer and bentonite as per design mix etc.)/As per Technical Specification (9.5/9.16.3/9.17.3.1/9.17.3.2) (SECTION B.9)

8.1) Concrete of grade M15/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

8.2) Concrete of grade M20/A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

8.3) Concrete of grade M25/ A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

8.4) Concrete of grade M25/ A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

8.5) Concrete of grade M35 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.16.10/9.17)

8.6) Back fill concrete of grade M15/A20 /As per Technical Specification (9.5/9.16.4/9.17.4/9.17.5)

9. REINFORCING STEEL /As per Technical Specification (SECTION B.11)

9.1) Providing, fabricating and placing in position HYSD reinforcement steel for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, binding with 1.25mm diameter annealed steel wire, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts. /As per Technical Specification (11/11.12)

9.2) Providing and fixing Couplers of 32mm dia and more including cost of all materials,labour,T&P etc for proper completion of work/As per Technical Specification (11.7/11.12)

10. WATERSTOPS /As per Technical Specification (SECTION B.12)

10.1) PVC water stops 300 mm wide /As per Technical Specification (12.5.1/12.7)

10.2) PVC water stops 150mm wide /As per Technical Specification (12.5.1/12.7)

10.3) Bituminous coating /As per Technical Specification (12.5.5/12.7)

11. METAL WORKS /As per Technical Specification (SECTION B.13)

11.1) Embedded Metal Works, Miscellaneous steel sections including frames, gratings, covers,climbing irons (rungs) etc /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

11.3) Erection of Metal works supplied by others /As per Technical Specification (13.8/13.9.10)

12.1.1) Using MSME Wall as per Manfacturer's specifications

6.3.2) Using Micro-by-Ultrafine Cement

6.6.1) Using Cement , sand & admixtures

11.4) Air vent pipe /As per Technical Specification(13.7.2/13.9.3)

12. MISCELLANEOUS AND ANCILLARY WORKS, SLOPE PROTECTION /As per Technical Specification (SECTION B.15 & B16)

12.2) PVC pipes including all labour and T&P required for proper completion/As per Technical Specification (15.5/15.7.5)

12.2.1) 75mm nominal dia. /As per Technical Specification (15.5/15.7.5)

12.2.2)100mm nominal dia./As per Technical Specification (15.5/15.7.5)

12.2.3)150mm nominal dia./As per Technical Specification (15.5/15.7.5)

5.3.2) Using Micro-by-Ultrafine Cement

4.15.1) 50 Dia. Medium MS pipe

10.3) 600mm Dia MS Pipe for raprian flow release with boulder protection strainer on u/s face (For Maximum Pressure of 5 kg/cm2)

PACKAGE-1 CIVIL WORK PART C (POWERHOUSE,SWITCHYARD AND TRC) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

PACKAGE-II HM WORK PRICE SCHEDULE-2 (Local Transportation including Port Clearance & Port Charges and inland Insurance) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

PACKAGE-II HM WORK PRICE SCHEDULE-3 (Model Test and Installation Services ) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

10.9) Supply and erection of MS pipe Dia 2 mtr as per approved GFC drawing including cost of all materials,labour,T&P etc for proper completion of work./As per Technical Specification (13.7.8/13.9.8)

500 kVA Silent DG Set complete with all accessories, fuel system, instrumentation and wiring as per specifications and scope defined in in Chapter 16 of Section IX- (PTS).

1.1)Common Excavation in all classes of soil /soft rock.As per Technical Specification (2.3.1/2.4.3/2.10.1/2.10.3)

SILT FLUSHING GATE WITH FIXED UNDERSLUNG ROPE DRUM HOIST

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, slide/wheel tracks & side seal seats, side guides, top seal seat, anchor bolts, nuts & washers, support angles, latching and storage arrangement over the piers and embedded parts and ladder for storage pit with steel grating etc. as per scope of work and technical specifications.

PACKAGE-III (E&M WORKS) PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

Supply ,manufacture and erection in position of temporary supports/ struts in hazardous position. Note : On removal of temporary supports,released structural steel will be property of contractor.

Dismantlling of existing permanent/ temporary supports and leading the cut supports to contractor's store/ depot etc with contractor's men,material, consumables, tools & plants, equipments, machineries, including all lead & lifts, loading, unloading, etc complete.

Cavity concreting through bores/local pipes (Bores/local pipes to be paid separately as specified below) with concrete of grade M10 or any approved mix using 10mm size aggregate with contractors men, material, consumables,tools and plants,equipments, machineries , including all lead and lift, loading , unloading etc. complete. Payment for supply of cement will be made separately as per actual consumption or approved mix proportions (nominal /design ), which ever is lower.

Drilling of bores 100 to 150mm dia. for cavity concreting through all types of soil/rock etc. with contractors men, material, consumables,tools and plants,equipments, machnieries , including all lead and lift, loading , unloading etc. complete

Drilling holes upto 38mm dia. and upto 4000mm deep inside concrete or shotcrete or rock for contact or pressure grouting etc. with contractors men, material, consumables,tools and plants,equipments, machnieries , including all lead and lift, loading , unloading etc. complete.

Bi-Reflex Paper target points along with break off point & 500 mm long 3D monitoring bolt

Topographical markers/Survey Points

Vibrating wire type Load Cells Measuring Range: 30 T Over Range Limit: 150% with 20m cable

BoQ_Ver4.0

itemH1Code298

itemH1Code297

Name of the Bidder/ Bidding Firm / Company :

Local Transportation including Port Clearances & Port Charges and Inland Insurance

NUMBER #

1)OPEN/SURFACE EXCAVATION & UNDER GROUND EXCAVATION /As per Technical Specification (SECTION B.2 & B.3)

1.1) Common Excavation all other open structure /As per Technical Specification(2.3.1/2.4.3/2.10.1/2.10.3)

1.3) Underground Excavation //As per Technical Specification (3.8.1/3.8.2/3.15.1/3.15.2)

2) ROCK SUPPORTS FOR OPEN/SURFACE EXCAVATION & UNDER GROUND EXCAVATION /As per Technical Specification (SECTION B.4 )

2.1)Rock anchors(25 mm dia ) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

2.1.1) Length up to 6 m

2.1.2) Length more than 6 m

2.2)Rock anchors (32mm dia.) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

2.2.1) Length up to 6 m

2.2.2) Length more than 6 m

2.3) Rock bolts ( Resin end anchorage and cement grouted) 25mm dia. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

2.3.1) Length up to 6 m

2.3.2) Length more than 6 m

2.4) Rock bolts (Resin end anchorage and cement grouted) 32mm dia. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

2.4.1) Length up to 6 m

2.4.2) Length more than 6 m

2.5) Rock Bolt / Rock Anchor Extensions into Concrete (4.5.7/4.10.2)

2.6) Self Drilling Anchor R25 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.8/4.10.1/4.10.2)

2.6.1) Length up to 6 m

2.6.2)Length more than 6 m

2.7 )Self Drilling Anchor R32 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.8/4.10.1/4.10.2)

2.7.1)Length up to 6 m

2.7.2) Length more than 6 m

2.8) Chain link fabric /As per Technical Specification (4.7.1/4.10.4.1)

2.9) Welded wire mesh /As per Technical Specification (4.7.2/4.10.4.2)

2.10) Permanent Steel support in pressure shaft underground works under scope of power house /As per Technical Specification (4.8/4.10.5.1)-Steel Ribs

2.11 )Lattice Girders in pressure shaft underground works under scope of power house /As per Technical Specification (4.8.2/4.10.5.1)

2.12 )Steel Lagging in pressure shaft underground works under scope of power house/As per Technical Specification (4.8.4/4.10.5.2)

2.13) Precast Reinforced Concrete lagging in pressure shaft underground works under scope of power house /As per Technical Specification (4.8.4/4.10.5.2)

2.14) Forepoling using Reinforcement Bars in pressure shaft underground works under scope of power house/As per Technical Specification (4.9.1/4.10.6)

2.15) Pipe Roofing using Reinforcement Bars and Structural Steel in pressure shaft underground works under scope of power house/As per Technical Specification (4.9.2/4.10.6.3)

2.15.1 ) 50 Dia. Medium MS pipe

2.15.2) 75 Dia. Medium MS pipe

4.15.2) 75 Dia. Medium MS pipe

3.SHOTCRETE / GUNITING /As per Technical Specification (B.5)

3.1)Plain shotcrete /As per Technical Specification(5.1 to 5.17)

Automatic weathering station with wind speed, air temperature, rainfall, relative humidity

Erection, Testing & Commissioning of 500 kVA, 415V, 0.80 P.F. 50Hz, 3 phase, CPCB 4 Plus silent diesel generator complete in all respect as per scope of work and technical specifications.

4.)FILL,BACKFILL,RIPRAP AND PITCHING/As per Technical Specification (SECTION B.6)

4.1)Random backfill including cost of backfill materials,labour and T&P complete in all respect/As per Technical Specification (6.3/6.10/6.11)

4.2)Compacted backfill including cost of backfill materials,labour and T&P complete in all respect/As per Technical Specification (6.3/6.10/6.11)

4.3)Graded/ Inverted Filter including cost of backfill materials,labour and T&P complete in all respect/As per Technical Specification (6.5/6.10/6.11)

4.4)Stone pitching /As per Technical Specification (6.6/6.10/6.11)

5.)DRILLING AND GROUTING /As per Technical Specification (SECTION B.-7)

5.1)Drilling for Contact/consolidation grouting including labour and T&P complete in all respect/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

5.2)Grouting operation for contact/consolidation grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

5.3)Grouting materials for consolidation including cost of cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.1/7.9.6) (1 Bag = 50kg of Cement)

6.6.2) Using Micro-by-Ultrafine Cement

12.3.1) Using Cement , sand & admixtures

5.4)Drilling for curtain grouting including labour and T&P complete in all respect /As per Technical Specification(7.8.2.1/7.8.4.6/7.9.7)

5.5)Grouting operation for curtain grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.8.4.6/7.9.7)

5.6)Grouting materials for Curtain grouting incuding cost cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.1/7.9.6) (1 Bag = 50kg of Cement)

12.3.2) Using Micro-by-Ultrafine Cement

2.1.1) For Rock Class A, B & C

5.7)Drilling of drainage hole/probe hole 76mm dia. /As per Technical Specification (7.8.2.1/7.9.9)

5.8)Perforated PVC pipes 50mm dia in drainage holes /As per Technical Specification (7.9.9)

5.9)Drilling of Exploratory Holes / Instrumentation/ Check holes etc. /As per Technical Specification (7.8.2.2)

5.9.1)Drilling Nx/Hx size exploratory hole with core recovery /As per Technical Specification (7.8.2.2/7.9.10)

5.9.2)Drilling Nx/Hx size exploratory hole without core recovery /As per Technical Specification (7.8.2.2/7.9.10)

5.10) Embedded pipes & fittings /As per Technical Specification (7.4.4/7.9.13)

5.11)Water pressure test/Lugeon Test as per IS:6066 /As per Technical Specification (7.8.3/7.4.3/7.9.12)

6.)CONCRETE in Powerhouse foundation, slab,beam,column,spiral casing,machine hall,control building,TRC,service bay,transformer etc.(including cost of dewatering,formwork ,cement,sand,admixtures,micro/ultra fine cement, air entraining agent and bentonite as per design mix etc.)/As per Technical Specification (SECTION B.9)

6.1)Concrete of grade M15/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.2)Concrete of grade M15/A20/As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.3)Concreting of grade M20/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.4)Concrete of grade M20/ A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.5)Concrete of grade M25 /A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.6)Concrete of grade M25 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.7)Concrete of grade M35 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.16.10/9.17.1)

6.8)Porous concrete /As per Technical Specification (9.16.14/9.17)

6.9)Plums(stone) in concrete including cost of stones,labour and T&P but excluding cost of concrete as per design mix /As per Technical Specification (9.17.15)

6.10)Non shrinkage epoxy grout/As per Technical Specification (9.16.11/9.17.8)

6.11)Non shrinkage pourable cementious grout/As per Technical Specification (9.16.11/9.17.8)

nits for vibrating wire type instruments

7.REINFORCING STEEL /As per Technical Specification (SECTION B.11)

7.1)Providing, fabricating and placing in position HYSD reinforcement steel for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, binding with 1.25mm diameter annealed steel wire, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts. /As per Technical Specification (11/11.10)

7.2)Providing and fixing Couplers of 32mm dia and more including cost of all materials,labour,T&P etc for proper completion of work /As per Technical Specification (11.7/11.12)

8.WATERSTOPS /As per Technical Specification (SECTION B.12)

8.1)PVC water stops 300mm wide /As per Technical Specification (12.5.1/12.7)

8.2)PVC water stops 150mm wide /As per Technical Specification (12.5.1/12.7)

8.3)Bituminous coating /As per Technical Specification (12.5.5/12.7)

9.)METAL WORKS /As per Technical Specification (SECTION B.13)

9.1)Providing and fixing G.I Pipe up to 100mm dia including cost of all materials,labour,T&P etc for proper completion of work /As per Technical Specification (13.5.2/13.9.2)

9.2)Providing and fixing G.I Pipe above 100mm dia including cost of all materials,labour,T&P etc for proper completion of work/As per Technical Specification (13.5.2/13.9.2)

9.3)Embedded Metal Works, Miscellaneous steel sections including frames, gratings, covers,climbing irons (rungs), etc /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

9.4)Hand rails/Railing /Ladders /As per Technical Specification (13.7.4/13.7.5/13.7.6/13.9.5/13.9.6)

9.5)Erection of Metal works supplied by others /As per Technical Specification (13.8/13.9.10)

9.6)Supply and Erection of MS Earthing bar/flat and risers /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

9.7)Providing, fabricating and placing in position the roof truss and supporting structural steel works for the powerhouse building including cleaning, straightening, cutting, bending, hooking, lapping, binding, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts. /As per Technical Specification (13.7.8/13.9.8)

9.8)Providing, fabricating and placing in the position special formwork/shuttering for Barrel concreting in Powerhouse building as per GFC drawings including cleaning, straightening, cutting, bending, hooking, lapping, binding, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts but exclusive the cost of scarp generated after dismanteling.(after dismanteling the scrap of barrel shuttering shall be the property of contractor)/As per Technical Specification (13.7.8/13.9.8)

10.)MISCELLANEOUS AND ANCILLARY WORKS, SLOPE PROTECTION /As per Technical Specification (SECTION B.15 & B16)

10.1)Gabions /wire crate with boulders filling including all materials./As per Technical Specification (16.3/16.8.2/16.8.3)

10.2)PVC pipes including all labour and T&P required for proper completion /As per Technical Specification (15.5/15.7.5)

10.2.1)75mm nominal dia. /As per Technical Specification (15.5/15.7.5)

10.2.2)100mm nominal dia./As per Technical Specification (15.5/15.7.5)

10.2.3)150mm nominal dia./As per Technical Specification (15.5/15.7.5)

10.3)Random rubble masonry (wet) /As per Technical Specification (16.4.1/16.8.4)

10.4)Random rubble masonry (dry) /As per Technical Specification (16.4.2/16.8.5)

11)PERMEATION GROUTING (SEEPAGE CUT-OFF WORKS) /As per Technical Specification (SECTION B.19)

11.1)Drilling 136-172 mm dia holes by rotary/odex/percussion drilling including cost of all materials,labour,T&P etc for proper completion of work./As per Technical Specification Item (19.4.4/19.5.1)

11.2)Supply and installation of TAM pipe/perforated grout casing pipe of internal dia 45-65 mm including cost of bentonite,materials,labour,T&P etc for proper completion of work. /As per Technical Specification (19.4.8/19.5.1)

11.3)Permeation Grouting to attain the desired lugeon value including cost of cement,sand,ultra fine cement, sodium silicate, Bentonite,admixtures,all labour,equipment,T&P etc but excluding cost of drilling,cost of TAM pipe and shifting operation cost of equipments(1 Bag = 50kg of Cement)./ As per Technical Specification (19.4.7/19.5.1)

2.1.3) Extra for excvation in pressure shaft/surge shaft/penstocks

4.15.3) Supply, drilling hole, installation and grouting of pre-support elements (Pipe roofing) up to 114.3mm OD and up to 15m long with conventional drilling techniques at a shallow look out angle from the tunnel axis with specialised drill bit and casing systems providing direction control and installation accuracy as per approved drawings and Specifications or as directed by Engineer, with contractors men, material, consumables including grout coupling, plants, equipments, machineries, including all lead & lifts loading , unloading etc required for the complete job.

11.4)Grouting operation for permeation grouting (Shifting of Equipments)/As per Technical Specification (19.4.8 & 19.4.9/19.5.1)

10.4) Flow Regulating Valve 600mm Dia (For Maximum Pressure of 5 kg/cm2)

1.2) Hard Rock Excavation requiring blastingfor all other open structure /As per Technical Specification (2.3.2/2.4.4/2.10.1/2.10.4)

Supplying and fixing of 100 to 150mm dia. MS pipe ('C' class) in bore holes for cavity concreting/ fixing with contractors men, material, consumables,tools and plants,equipments,machnieries , including all lead and lift, loading , unloading etc. complete.(Weight shall be calculated by material volume X denisty of MS steel 7850 kg/m³)

BoQ_Ver4.0

Recommended Spare part 97

itemH1Code297

Name of the Bidder/ Bidding Firm / Company :

Digital Programmable Electronic type governor including oil-pumping units, pressure and sump tanks, allied valves and piping as per specifications and scope defined in Chapter 3 of Section IX- (PTS)

NUMBER #

itemH1Code390

Carrying out Tunnel Seismic Prediction (TPS) Survey/ Measurement in tunnel with data processing, evaluation and Report submission in 3 copies (Hard and Soft) inculding all preparatory works and mobilization of requisite machineries, equipment, manpower, expert personnel and other field expenses, if any, including all lead and lift, taxes etc. complete.

6.12)Self Compacted Concrete (SCC) M35/A10

3.2)Steel fibre reinforced shotcrete (SFRS) including steel fibre /As per Technical Specification (5.1 to 5.17)

4.2) Colcrete (Cement mortar 1:3)/As per Technical Specification (6.8/6.10/6.11)

3.10) Pre stressed cable anchor, up to 30.00 m long /As per Technical Specification (4.6/4.10.1/4.10.3)

3.11) Pre stressed cable anchor, above 30.00 m /As per Technical Specification (4.6/4.10.1/4.10.3)

Radial gate for a clear opening size of 15 m (w) x 20.3 m (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

Radial gate with flap gate for a clear opening size of 15 m (w) x 20.3 m (h) including flap of size 9 m (w) x 1.8 (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, rubber seal (bottom and sides) assemblies, seals & seal seat for flap gate, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, wall plates, top seal seat with anchor bolts, nuts & washers and full-length anchors for trunnion brackets, anchors for steel support beam for hoist, etc. as per scope of work and technical specifications.

Single acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories such as cylinder support steel beam with bracket and connecting pin, self-lubricating bearing for either ends, gate position indicator and sensor/limit switches for operation of radial gates and other associated components required for the erection and commissioning etc.as per scope of work and technical specifications.

Independent hydraulic power pack assembly & control system including oil tank, hydraulic oil, seamless piping between power pack and cylinders and pipe fittings/ supports and other accessories like flexible pressure hoses, pipe connectors, ball valves, heavy duty pipe clamps, lighting and other fittings etc. complete in all respects for operation of hydraulic hoists as per scope of work and technical specifications.

Double acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories, hydraulic power pack & control system for smooth operation of flap gate including motor, pump, control panel, piping, pressure gauges, flow control valves, pressure switches etc. with controls, manual controls, limit switches and other fittings etc. as per scope of work and technical specifications..

Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

Erection, Testing & Commissioning of Illumination of all gate decks and hoists etc. as per scope of work and technical specifications.

Trolley mounted (mobile) gasoline engine complete with control and accessories as per scope of work and technical specifications.

Erection, Testing & Commissioning of Earthing of all gates, hoists and electrical system etc. as per scope of work and technical specifications.

Flushing cum filtering unit complete with control and accessories as per scope of work and technical specifications.

Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

Low vacuum dehydration and degasification unit complete with control and accessories including One (01) unit of contamination checking kit as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

Rubber seal (bottom and sides) assemblies in accordance with scope of work, GTS and PTS

STOPLOG GATE WITH GANTRY CRANE AND LIFTING BEAM

6.12)Self Compacted Concrete (SCC) M35/A10

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and storage pit as per scope of work and technical specifications.

Lifting beam of adequate capacity with automatic engaging / disengaging device complete with frame, guides, pulleys, bearings, counterweight and other accessories, etc. as per scope of work and technical specifications.

Electrically operated travelling gantry crane with cross-travel arrangement, pendent operated of adequate capacity along with necessary structural, mechanical and electrical control equipment including gantry track rails (extended up to parking/embedded parts/end stoppers, counterweight and other accessories complete in all respects for safe operation of spillway stoplogs along with lifting beam as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 2.9 of Particular Technical Specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS.

INTAKE STOPLOG GATE WITH ROPE DRUM HOIST

Fixed wheel vertical lift type Intake Stoplog Gate for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels, filling valve and other components as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 3.9 of Particular Technical Specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

INTAKE SERVICE GATE WITH ROPE DRUM HOIST

1.2)Hard Rock Excavation requiring blasting /As per Technical Specification (2.3.2/2.4.4/2.10.1/2.10.4)

Fixed wheel vertical lift type Intake Service Gates for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels and other components as per scope of work and technical specifications.

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Local Control Panel

for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 4.9 of Particular Technical Specifications

INTAKE TRASH RACK AND TRCM

First stage inserts and embedded parts in the primary concrete to facilitate erection of second stage embedded parts., complete in all respect as per scope of works and technical specifications.

Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

ADIT PLUG GATE

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 6.9 of Particular Technical Specifications.

Rubber seals in accordance with scope of work, GTS and PTS

SURGE SHAFT GATES WITH ROPE DRUM HOIST

Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for surge shaft gate as per scope of works and technical specifications.

Rubber seals in accordance with scope of work, GTS and PTS

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

Mandatory Spare parts in accordance with clause 7.9 of Particular Technical Specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

DRAFT TUBE GATES WITH ROPE DRUM HOIST

Rubber seals in accordance with scope of work, GTS and PTS

Erection, Testing & Commissioning of Main distribution board and feeder panel for all HM equipment at Barrage complex / Intake gates / surge shaft gates / Draft tube gates and powerhouse with necessary auxiliaries as per scope of works and technical specifications.

Fixed wheel vertical lift type Draft Tube gates for a clear opening of 4.75 m(w) x 5.06 m (h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for draft tube gate as per scope of works and technical specifications.

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 8.9 of Particular Technical Specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

FISH LADDER GATE WITH ELECTRICALLY OPERATED SCREW ROD HOIST

Fixed wheel vertical lift type Fish ladder gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

PLC based remote control sysytem complete with all accessories to operate,control and monitor individual radial gates from Barrage Control Room as per scope of work and Technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for fish ladder gate as per scope of works and technical specifications.

Elecrically operated screw rod hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 9.9 of Particular Technical Specifications.

Fixed wheel vertical lift type Silt flushing gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for silt flushing gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 10.9 of Particular Technical Specifications.

MANDATORY TOOL & TACKLES

Mandatory Tools & Tackles as per scope of works, GTS & PTS

Surge Tank Auxiliary Transformer (500 kVA) associated with all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

Main distribution board and feeder panel for all HM equipment at Barrage complex / Intake gates / surge shaft gates / Draft tube gates and powerhouse with necessary auxiliaries as per scope of works and technical specifications.

Power, Control, Instrumentation cables etc. along with all necessary accessories like lugs, cable trays etc as per scope of work and technical specifications.

BoQ_Ver4.0

Recommended Spare part 98

itemH1Code297

Name of the Bidder/ Bidding Firm / Company :

Local Transportation including Port Clearances & Port Charges and Inland Insurance

NUMBER #

itemH1Code390

Carrying out Tunnel Seismic Prediction (TPS) Survey/ Measurement in tunnel with data processing, evaluation and Report submission in 3 copies (Hard and Soft) inculding all preparatory works and mobilization of requisite machineries, equipment, manpower, expert personnel and other field expenses, if any, including all lead and lift, taxes etc. complete.

6.12)Self Compacted Concrete (SCC) M35/A10

3.2)Steel fibre reinforced shotcrete (SFRS) including steel fibre /As per Technical Specification (5.1 to 5.17)

4.2) Colcrete (Cement mortar 1:3)/As per Technical Specification (6.8/6.10/6.11)

3.10) Pre stressed cable anchor, up to 30.00 m long /As per Technical Specification (4.6/4.10.1/4.10.3)

3.11) Pre stressed cable anchor, above 30.00 m /As per Technical Specification (4.6/4.10.1/4.10.3)

Radial gate for a clear opening size of 15 m (w) x 20.3 m (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

Radial gate with flap gate for a clear opening size of 15 m (w) x 20.3 m (h) including flap of size 9 m (w) x 1.8 (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, rubber seal (bottom and sides) assemblies, seals & seal seat for flap gate, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, wall plates, top seal seat with anchor bolts, nuts & washers and full-length anchors for trunnion brackets, anchors for steel support beam for hoist, etc. as per scope of work and technical specifications.

Single acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories such as cylinder support steel beam with bracket and connecting pin, self-lubricating bearing for either ends, gate position indicator and sensor/limit switches for operation of radial gates and other associated components required for the erection and commissioning etc.as per scope of work and technical specifications.

Independent hydraulic power pack assembly & control system including oil tank, hydraulic oil, seamless piping between power pack and cylinders and pipe fittings/ supports and other accessories like flexible pressure hoses, pipe connectors, ball valves, heavy duty pipe clamps, lighting and other fittings etc. complete in all respects for operation of hydraulic hoists as per scope of work and technical specifications.

Double acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories, hydraulic power pack & control system for smooth operation of flap gate including motor, pump, control panel, piping, pressure gauges, flow control valves, pressure switches etc. with controls, manual controls, limit switches and other fittings etc. as per scope of work and technical specifications..

Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

Erection, Testing & Commissioning of Illumination of all gate decks and hoists etc. as per scope of work and technical specifications.

Trolley mounted (mobile) gasoline engine complete with control and accessories as per scope of work and technical specifications.

Erection, Testing & Commissioning of PLC based remote control sysytem complete with all accessories to operate,control and monitor individual radial gates from Barrage Control Room as per scope of work and Technical specifications.

Flushing cum filtering unit complete with control and accessories as per scope of work and technical specifications.

Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

Low vacuum dehydration and degasification unit complete with control and accessories including One (01) unit of contamination checking kit as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

Rubber seal (bottom and sides) assemblies in accordance with scope of work, GTS and PTS

STOPLOG GATE WITH GANTRY CRANE AND LIFTING BEAM

6.12)Self Compacted Concrete (SCC) M35/A10

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and storage pit as per scope of work and technical specifications.

Lifting beam of adequate capacity with automatic engaging / disengaging device complete with frame, guides, pulleys, bearings, counterweight and other accessories, etc. as per scope of work and technical specifications.

Electrically operated travelling gantry crane with cross-travel arrangement, pendent operated of adequate capacity along with necessary structural, mechanical and electrical control equipment including gantry track rails (extended up to parking/embedded parts/end stoppers, counterweight and other accessories complete in all respects for safe operation of spillway stoplogs along with lifting beam as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 2.9 of Particular Technical Specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS.

INTAKE STOPLOG GATE WITH ROPE DRUM HOIST

Fixed wheel vertical lift type Intake Stoplog Gate for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels, filling valve and other components as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 3.9 of Particular Technical Specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

INTAKE SERVICE GATE WITH ROPE DRUM HOIST

1.2)Hard Rock Excavation requiring blasting /As per Technical Specification (2.3.2/2.4.4/2.10.1/2.10.4)

Fixed wheel vertical lift type Intake Service Gates for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels and other components as per scope of work and technical specifications.

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Local Control Panel

for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 4.9 of Particular Technical Specifications

INTAKE TRASH RACK AND TRCM

First stage inserts and embedded parts in the primary concrete to facilitate erection of second stage embedded parts., complete in all respect as per scope of works and technical specifications.

Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

ADIT PLUG GATE

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 6.9 of Particular Technical Specifications.

Rubber seals in accordance with scope of work, GTS and PTS

SURGE SHAFT GATES WITH ROPE DRUM HOIST

Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for surge shaft gate as per scope of works and technical specifications.

Rubber seals in accordance with scope of work, GTS and PTS

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

Mandatory Spare parts in accordance with clause 7.9 of Particular Technical Specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

DRAFT TUBE GATES WITH ROPE DRUM HOIST

Rubber seals in accordance with scope of work, GTS and PTS

Erection, Testing & Commissioning of Main distribution board and feeder panel for all HM equipment at Barrage complex / Intake gates / surge shaft gates / Draft tube gates and powerhouse with necessary auxiliaries as per scope of works and technical specifications.

Fixed wheel vertical lift type Draft Tube gates for a clear opening of 4.75 m(w) x 5.06 m (h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for draft tube gate as per scope of works and technical specifications.

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 8.9 of Particular Technical Specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

FISH LADDER GATE WITH ELECTRICALLY OPERATED SCREW ROD HOIST

Fixed wheel vertical lift type Fish ladder gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

PLC based remote control sysytem complete with all accessories to operate,control and monitor individual radial gates from Barrage Control Room as per scope of work and Technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for fish ladder gate as per scope of works and technical specifications.

Elecrically operated screw rod hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 9.9 of Particular Technical Specifications.

Fixed wheel vertical lift type Silt flushing gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for silt flushing gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 10.9 of Particular Technical Specifications.

MANDATORY TOOL & TACKLES

Mandatory Tools & Tackles as per scope of works, GTS & PTS

Surge Tank Auxiliary Transformer (500 kVA) associated with all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

Main distribution board and feeder panel for all HM equipment at Barrage complex / Intake gates / surge shaft gates / Draft tube gates and powerhouse with necessary auxiliaries as per scope of works and technical specifications.

Power, Control, Instrumentation cables etc. along with all necessary accessories like lugs, cable trays etc as per scope of work and technical specifications.

BoQ_Ver4.0

Recommended Spare part 99

itemH1Code297

Name of the Bidder/ Bidding Firm / Company :

Local Transportation including Port Clearances & Port Charges and Inland Insurance

NUMBER #

Illumination of all gate decks and hoists etc. as per scope of work and technical specifications.

Redundant AC-DC and / or DC-DC convertors along with 24V sub-distribution DC distribution boards etc. as per scope of work and technical specifications.

Earthing of all gates, hoists and electrical system etc. as per scope of work and technical specifications.

Instrumentation system complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 12.18 of Particular Technical Specifications..

INSTRUMENTATION & CONTROL SYSTEM

500 kVA, 415V, 0.80 P.F. 50Hz, 3 phase, CPCB 4 Plus silent diesel generator complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 13.12 of Particular Technical Specifications..

RADIAL GATES WITH HYDRAULIC HOIST

Erection, Testing & Commissioning of Radial gate for a clear opening size of 15 m (w) x 20.3 m (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Radial gate with flap gate for a clear opening size of 15 m (w) x 20.3 m (h) including flap of size 9 m (w) x 1.8 (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, r

ubber seal (bottom and sides) assemblies, seals & seal seat for flap gate, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts complete with sill beam, wall plates, top seal seat with anchor bolts, nuts & washers and full-length anchors for trunnion brackets, anchors for steel support beam for hoist, etc. as per scope of work and technical specifications.

Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

Erection, Testing & Commissioning of Redundant AC-DC and / or DC-DC convertors along with 24V sub-distribution DC distribution boards etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Single acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories such as cylinder support steel beam with bracket and connecting pin, self-lubricating bearing for either ends, gate position indicator and sensor/limit switches for operation of radial gates and other associated components required for the erection and commissioning etc.as per scope of work and technical specifications.

Erection, Testing & Commissioning of Power, Control, Instrumentation cables etc. along with all necessary accessories like lugs, cable trays etc as per scope of work and technical specifications.

Erection, Testing & Commissioning of Independent hydraulic power pack assembly & control system including oil tank, hydraulic oil, seamless piping between power pack and cylinders and pipe fittings/ supports and other accessories like flexible pressure hoses, pipe connectors, ball valves, heavy duty pipe clamps, lighting and other fittings etc. complete in all respects for operation of hydraulic hoists as per scope of work and technical specifications.

Erection, Testing & Commissioning of Double acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories, hydraulic power pack & control system for smooth operation of flap gate including motor, pump, control panel, piping, pressure gauges, flow control valves, pressure switches etc. with controls, manual controls, limit switches and other fittings etc. as per scope of work and technical specifications..

Erection, Testing & Commissioning of Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

Rubber seal (bottom and sides) assemblies in accordance with scope of work, GTS and PTS

Testing & Commissioning of Trolley mounted (mobile) gasoline engine complete with control and accessories as per scope of work and technical specifications.

Instrumentation system complete in all respect as per scope of work and technical specifications.

Testing & Commissioning of Flushing cum filtering unit complete with control and accessories as per scope of work and technical specifications.

Testing & Commissioning of Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

Testing & Commissioning of Low vacuum dehydration and degasification unit complete with control and accessories including One (01) unit of contamination checking kit as per scope of work and technical specifications.

Erection, Testing & Commissioning of Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS.

Erection, Testing & Commissioning of Rubber seal (bottom and sides) assemblies in accordance with scope of work, GTS and PTS

Erection, Testing & Commissioning of First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and storage pit as per scope of work and technical specifications.

Erection, Testing & Commissioning of Lifting beam of adequate capacity with automatic engaging / disengaging device complete with frame, guides, pulleys, bearings, counterweight and other accessories, etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Electrically operated travelling gantry crane with cross-travel arrangement, pendent operated of adequate capacity along with necessary structural, mechanical and electrical control equipment including gantry track rails (extended up to parking/embedded parts/end stoppers, counterweight and other accessories complete in all respects for safe operation of spillway stoplogs along with lifting beam as per scope of work and technical specifications.

Erection, Testing & Commissioning of Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS.

Erection, Testing & Commissioning of Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

INTAKE SERVICE GATE WITH ROPE DRUM HOIST

2.1) Common Excavation in all types of soil//soft rock for Barrage/ Intake and all other open structure /As per Technical Specification (2.3.1/2.4.3/2.10.1/2.10.3)

Erection, Testing & Commissioning of Fixed wheel vertical lift type Intake Stoplog Gate for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels, filling valve and other components as per scope of work and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

2.2) Hard Rock Excavation incl. blasting for Barrage/ Intake and all other open structure /As per Technical Specification (2.3.2/2.4.4/2.10.1/2.10.4)

Local Control Panel

Erection, Testing & Commissioning of Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Intake Service Gates for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels and other components as per scope of work and technical specifications.

Erection, Testing & Commissioning of First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Erection, Testing & Commissioning of Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Erection, Testing & Commissioning of First stage inserts and embedded parts in the primary concrete to facilitate erection of second stage embedded parts., complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

SURGE SHAFT GATES WITH ROPE DRUM HOIST

Erection, Testing & Commissioning of Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Erection, Testing & Commissioning of First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Erection, Testing & Commissioning of First stage inserts and embedded parts in the primary concrete to facilitate erection of second stage embedded parts., complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Rubber seals in accordance with scope of work, GTS and P

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Main distribution board and feeder panel for all HM equipment at Barrage complex / Intake gates / surge shaft gates / Draft tube gates and powerhouse with necessary auxiliaries as per scope of works and technical specifications.

Erection, Testing & Commissioning of First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for surge shaft gate as per scope of works and technical specifications.

7.8) High performance concrete(HPC) M60 including cost of cement , all admixtures ,aggregate, labour and T&P complete in all respect/As per Technical Specification (9.5/9.5.2/9.17.2)

Erection, Testing & Commissioning of Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

PLC based remote control sysytem complete with all accessories to operate,control and monitor individual radial gates from Barrage Control Room as per scope of work and Technical specifications.

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS

Erection, Testing & Commissioning of Fixed wheel vertical lift type Draft Tube gates for a clear opening of 4.75 m(w) x 5.06 m (h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for draft tube gate as per scope of works and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Fish ladder gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, rubber seal (bottom, sides, top and corners) assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for fish ladder gate as per scope of works and technical specifications.

Surge Tank Auxiliary Transformer (500 kVA) associated with all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

Erection, Testing & Commissioning of Elecrically operated screw rod hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

BoQ_Ver4.0

Recommended Spare part 99

Name of the Bidder/ Bidding Firm / Company :

Erection, Testing & Commissioning of Instrumentation system complete in all respect as per scope of work and technical specifications.

NUMBER #

itemH1Code391

itemH1Code392

itemH1Code393

itemH1Code394

Spillway Radial Gates & Hydraulic Hoists adherence to bid document.

Recommended Spare parts

Recommended Spare part 1

Recommended Spare part 2

Recommended Spare part 3

Recommended Spare part 4

Recommended Spare part 5

Recommended Spare part 6

Recommended Spare part 7

Recommended Spare part 8

Recommended Spare part 9

Recommended Spare part 10

Recommended Spare part 11

Recommended Spare part 12

Recommended Spare part 13

Recommended Spare part 14

Recommended Spare part 15

Recommended Spare part 16

Recommended Spare part 17

Recommended Spare part 18

Recommended Spare part 19

Recommended Spare part 20

Recommended Spare part 21

Recommended Spare part 22

Recommended Spare part 23

Recommended Spare part 24

Recommended Spare part 25

Recommended Spare part 26

Recommended Spare part 27

Recommended Spare part 28

Recommended Spare part 29

Recommended Spare part 30

Recommended Spare part 31

Recommended Spare part 32

Recommended Spare part 33

Recommended Spare part 34

Recommended Spare part 35

Recommended Spare part 36

Recommended Spare part 37

Recommended Spare part 38

Recommended Spare part 39

Recommended Spare part 40

Recommended Spare part 41

Recommended Spare part 42

Recommended Spare part 43

Recommended Spare part 44

Recommended Spare part 45

Recommended Spare part 46

Recommended Spare part 47

Recommended Spare part 48

Recommended Spare part 49

Recommended Spare part 50

Recommended Spare part 51

Recommended Spare part 52

Recommended Spare part 53

Recommended Spare part 54

Recommended Spare part 55

Recommended Spare part 56

Recommended Spare part 57

Recommended Spare part 58

Recommended Spare part 59

Recommended Spare part 60

Recommended

Spare part 61

Recommended Spare part 62

Recommended Spare part 63

Recommended Spare part 64

Recommended Spare part 65

Recommended Spare part 66

Recommended Spare part 67

Recommended Spare part 68

Recommended Spare part 69

Recommended Spare part 70

Recommended Spare part 71

Recommended Spare part 72

Recommended Spare part 73

Recommended Spare part 74

Recommended Spare part 75

Recommended Spare part 76

Recommended Spare part 77

Recommended Spare part 78

Recommended Spare part 79

Recommended Spare part 80

Recommended Spare part 81

Recommended Spare part 82

Recommended Spare part 83

Recommended Spare part 84

Recommended Spare part 85

Recommended Spare part 86

Recommended Spare part 87

Recommended Spare part 88

Recommended Spare part 89

Recommended Spare part 90

Recommended Spare part 91

Recommended Spare part 92

Recommended Spare part 93

Recommended Spare part 94

BoQ_Ver4.0

Recommended Spare part 99

itemH1Code297

Name of the Bidder/ Bidding Firm / Company :

PACKAGE-1 CIVIL WORK PART B (HRT,SURGE SHAFT,PENSTOCK AND ADITS ) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

4.SHOTCRETE / GUNITING /As per Technical Specification (B.5)

4.16) Supply & installation of 20 T capacity cable anchor including cost of drilling of required diameter hole (minimum 125mm diameter and depth 15- 30m) HT strand, Sheathing pipes, spacers, centerlisers etc for proper completion of work /As per Technical Specification (4.6)

TURBINE AND ACCESSORIES

12.6) Supply,fabrication,erection,testing and commissioning of steel liner plate in pressure shaft including transition u/s and d/s of surge shaft including cost of all materials, machinery, labour, complete and as directed with all leads and lifts./As per Technical Specification (B.20)

Specified Spare parts as per specifications and scope defined in Chapter 2 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 2 of Section IX- (PTS)

2.16) Supply & installation of 20 T capacity cable anchor including cost of drilling of required diameter hole (minimum 125mm diameter and depth 15- 30m) HT strand, Sheathing pipes, spacers, centerlisers etc for proper completion of work /As per Technical Specification (4.6)

DIGITAL GOVERNING SYSTEM AND ACCESSORIES

Specified Spare parts as per specifications and scope defined in Chapter 3 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 3 of Section IX- (PTS)

MAIN INLET VALVE AND ACCESSORIES (BUTTERFLY VALVE)

Installation and Other Services as per specifications and scope defined in Chapter 2 of Section IX- (PTS)

Main Inlet Valve of Butterfly Valve type including oil-pumping units, pressure and sump tanks, allied valves and piping as per specifications and scope as defined in Chapter 4 of Section IX- (PTS)

Specified Spare parts as per specifications and scope as defined in Chapter 4 of Section IX- (PTS)

Tools and instruments as per specifications and scope as defined in Chapter 4 of Section IX- (PTS)

Installation and Other Services as per specifications and scope as defined in Chapter 4 of Section IX- (PTS)

GENERATOR

42.353 MVA rated capacity with 10% overload capacity at 11 kV and 0.85 power factor, 50 Hz synchronous generator, direct driven, vertical shaft, complete with thrust and guide bearings, upper and lower bracket, other components and auxiliaries as per specifications and scope defined in Chapter 5 of Section IX- (PTS)

Specified Spare parts as per specifications and scope defined in Chapter 5 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 5 of Section IX- (PTS)

Installation and Other Services as per specifications and scope defined in Chapter 5 of Section IX- (PTS)

EXCITATION SYSTEM & DIGITAL VOLTAGE REGULATOR

Static Excitation system equipment complete with DVR, excitation transformer and other accessories as per specifications and scope defined Chapter 6 of Section IX- (PTS)

Specified Spare parts as per specifications and scope defined Chapter 6 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined Chapter 6 of Section IX- (PTS)

Installation and Other Services as per specifications and scope defined in Chapter 6 of Section IX- (PTS)

11 KV BUS DUCT

Bus duct, isolated type, CT, PT & SP along with all accessories and terminals cubicles and equipment as per specifications and scope defined in Chapter 7 of Section IX- (PTS)

Specified Spare parts as per specifications and scope defined in Chapter 7 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 7 of Section IX- (PTS)

Installation and Other Services as per specifications and scope defined in Chapter 7 of Section IX- (PTS)

GENERATOR STEP-UP TRANSFORMERS AND STATION TRANSFORMER

11 / 220 kV, 47MVA, ONAF, YNd11, Three phase Generator Step-up Transformer complete with all necessary items such as bushings, under-carriage, current transformers, cooling arrangements, instrumentation, valves, piping, mounting plates, hardware, fittings, cable trays, marshalling box, accessories, etc. as per specifications and scope defined in Chapter 8 of Section IX- (PTS)

220/11 kV, 10 MVA, ONAN, Three phase Station Transformer complete with all necessary items such as bushings, undercarriage, current transformers, cooling arrangements, instrumentation, valves, piping, mounting plates, hardware, grounding, fittings, cable trays, marshalling box, accessories, as per specifications and scope defined in Chapter 8 of Section IX- (PTS)

Specified Spare parts as per specifications and scope defined in Chapter 8 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 8 of Section IX- (PTS)

Installation and Other Services as per specifications and scope defined in Chapter 8 of Section IX- (PTS)

220 kV XLPE CABLES

XLPE power cable as per specifications and scope defined in Chapter 9 of Section IX

Specified Spare parts as per specifications and scope defined in Chapter 9 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 9 of Section IX- (PTS)

Installation and Other Services as per specifications and scope defined in Chapter 9 of Section IX- (PTS)

220 KV OUTDOOR SWITCHYARD

220 kV Outdoor Switchyard equipment including gantry structure, lightning arresters, capacitive voltage transformers, current Transformers, wave traps, disconnectors, conductors/aluminium pipes, earth wire, insulators, hardware items etc., as per specifications and scope defined in Chapter 10 of Section IX- (PTS)

Specified Spare parts as per specifications and scope defined in Chapter 10 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 10 of Section IX- (PTS)

Installation and Other Services as per specifications and scope defined in Chapter 10 of Section IX- (PTS)

220 V AND 48 V DC SYSTEM

220V and 48V DC System consisting of battery banks, battery chargers, inverters, UPS, distribution boards of appropriate ratings, mounting racks, and other accessories etc., as per specifications and scope defined in Chapter 11 of Section IX- (PTS)

Specified Spare parts as per specifications and scope defined in Chapter 11 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 11 of Section IX- (PTS)

Installation and Other Services as per specifications and scope defined in Chapter 11 of Section IX- (PTS)

COMPUTERISED CONTROL AND MONITORING (SCADA) SYSTEM

Control and Monitoring System including SCADA, Control boards, Router/gateways, workstations, reliable computers, Large screen LED based display unit, Control networks, Optical cable, printer units, operating keyboards, etc. as per specifications and scope defined in Chapter 12 of Section IX- (PTS)

Control room furniture as per specifications and scope defined in Chapter 12 of Section IX- (PTS)

Specified Spare parts as per specifications and scope defined in Chapter 12 of Section IX- (PTS)

Tools and instruments as per specifications and scope defined in Chapter 12 of Section IX- (PTS)

Installation and Other Services as per specifications and scope defined in Chapter 12 of Section IX- (PTS)

PROTECTION SYSTEM

Electrical Protection System for generating units and generator step-up transformer, 220kV XLPE cables, 220 kV Outdoor Switchyard, Station transformer, 11kV switchgear, SAT, UAT & Excitation transformer, Auxiliary Transformers, DC System, LV & MV Switchgear, 11KV XLPE cable, 220 kV Transmission lines etc. complete with all accessories, wiring and cubicles etc. as per specifications and scope defined in Chapter 13 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 13 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 13 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 13 of Section IX- (PTS)

POWER AND CONTROL CABLES

Power, Control and instrumentation cables, cables trays, supporting structures, complete with cable terminals and all accessories as per specifications and scope defined in Chapter 14 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 14 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 14 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 14 of Section IX- (PTS)

11 KV, 0.415KV SYSTEM & AUXILIARY TRANSFORMERS

11kV Switchgear along with all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

415 V switchgear systems complete with all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

Unit Auxiliary Transformer (500 kVA) associated with all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

Station Service Transformer (1000 kVA) associated with all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

Surge Tank Auxiliary Transformer (500 kVA) associated with all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

PACKAGE-II HM WORK PRICE SCHEDULE-1 (Supply Plant and Equipment including Mandatory Spare Parts and Tools & Instruments) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

Specified Spare parts as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 15 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 15 of Section IX- (PTS)

DG SETS

Specified Spare parts as per specifications and scope defined in in Chapter 16 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in in Chapter 16 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 16 of Section IX- (PTS)

PLCC SYSTEM

PLCC System complete with all accessories as per specifications and scope defined in in Chapter 17 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in in Chapter 17 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in in Chapter 17 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 17 of Section IX- (PTS)

ILLUMINATION SYSTEM

Illumination System complete with all accessories including distribution switchboards, cables/wires etc. for Indoor and Outdoor lighting as per specifications and scope defined in Chapter 18 of Section IX- (PTS)).

Specified Spare parts as per specifications and scope defined in Chapter 18 of Section IX- (PTS)).

Tools and instruments as per specifications and scope defined in Chapter 18 of Section IX- (PTS)).

Installation and Other Services as per specifications and scope defined in Chapter 18 of Section IX- (PTS)

COMMUNICATION SYSTEM

ILLUMINATION SYSTEM

Public Address System and EPBAX System as per specifications and scope defined in Chapter 19 of Section IX- (PTS)).

Conferencing System for powerhouse as per specifications and scope defined in Chapter 19 of Section IX- (PTS)).

Specified Spare parts as per specifications and scope defined in Chapter 19 of Section IX- (PTS)).

Tools and instruments as per specifications and scope defined in Chapter 19 of Section IX- (PTS)).

ELECTRIC OVERHEAD TRAVELLING (EOT) CRANES

160/35 T EOT crane with 10 T Monorail crane on EOT Crane for power house for Power House complete with all accessories as per specifications and scope defined in Chapter 20 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 20 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 20 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 20 of Section IX- (PTS)

COOLING WATER SYSTEM

Cooling Water System and other accessories as per specifications and scope defined in Chapter 21 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 21 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 21 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 21 of Section IX- (PTS)

DRAINAGE, DEWATERING & FLOOD PROTECTION SYSTEM

Drainage Water System complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Chapter 22 of Section IX- (PTS).

Dewatering system complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Chapter 22 of Section IX- (PTS).

Flood Dewatering system complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Chapter 22 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 22 of Secti

on IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 22 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 22 of Section IX- (PTS)

HEATING, VENTILATION AND AIR CONDITIONING SYSTEM (HVAC)

Heating, Ventilation and Air conditioning System complete with all accessories and controls as per specifications and scope defined in Chapter 23 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 23 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 23 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 23 of Section IX- (PTS)

GROUNDING SYSTEM

Grounding System for Power house & Switchyard complex, tailrace area, Draft tube area and adjoining functional areas etc., complete with all accessories as per specifications and scope defined in Chapter 26 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 24 of Section IX- (PTS)

COMPRESSED AIR SYSTEMS

Compressed air system as per specifications and scope defined in Chapter 25 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 25 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 25 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 25 of Section IX- (PTS)

FIRE FIGHTING SYSTEM

Fire Fighting System as per specifications and scope defined in Chapter 26 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 26 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 26 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 26 of Section IX- (PTS)

OIL HANDLING SYSTEM

Insulating oil handling systems as per specifications and scope defined in Chapter 27 of Section IX- (PTS).

Lubricating oil handling systems as per specifications and scope defined in Chapter 27 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 27 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 27 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 27 of Section IX- (PTS)

ELEVATOR

Elevator complete with all accessories as per specifications and scope defined in Chapter 28 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 28 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 28 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 28 of Section IX- (PTS)

SECURITY AND SURVEILLANCE SYSTEM

Security and Surveillance System with its all accessories as per specifications and scope defined in Chapter 29 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 29 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 29 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 29 of Section IX- (PTS)

SPECIAL ENERGY METERS AND ASSOCIATED METERING SYSTEM

Special Energy Meters and Associated Metering System with its all accessories as per specifications and scope defined in Chapter 30 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 30 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 30 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 30 of Section IX- (PTS)

ELECTRICAL WORKSHOP

Electrical Workshop with its all accessories as per specifications and scope defined in Chapter 31 of Section IX- (PTS).

Specified Spare parts as per specifications and scope defined in Chapter 31 of Section IX- (PTS).

Tools and instruments as per specifications and scope defined in Chapter 31 of Section IX- (PTS).

Installation and Other Services as per specifications and scope defined in Chapter 31 of Section IX- (PTS)