CONSTRUCTION OF ADDITIONA ACCOMODATION OF GOVT SR SECO SCHOOL AT LAG BALIAYANA TEHSIL PRAGPUR DISTT KANGRA H.P SUB HEAD C.O TWO NO.S CLASS ROOM IN GROUND FLOOR

Amount

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, and as directed by the Engineer-in-Charge including carriage of materials. Within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and depths, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetera up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications, as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-25 (Twenty five) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 400 kg (four hundred) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per HPPWD specification and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-25 (Twenty five) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 400 kg (four hundred) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/ thickness upto all floor level. including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-25 (Twenty five) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 400 kg (four hundred) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness upto all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-25 (Twenty five) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 400 kg (four hundred) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in plinth beam , lintel beam and slab level beam as per drawing and design complete up to all heights up to all floor level but excluding the cost of reinforcement and as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (un coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in all above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement isto four sand) shall be provided with hoop iron and curing complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing both side prelaminated board bwp phenol bonded exterior/interior grade 12mm (Twelve millimeter) thick water proof of Action Tesa/ Century/Kitlam/Kit Ply/Green Ply ISI marked and approved shade for in fill pannel of alluminium shutters as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 1st class Sal Wood work in frames of doors, windows, clerestory, windows and other frames wrough, framed and fixed in position complete upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 30mm (thirty millimeter) thick second class deodar Wood panelled glazed or panelled and glazed shutters for doors, windows and clearstory windows including black enamelled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government

Providing and fixing 35mm (thirty millimeter) thick second class deodar wood wire gauze shutters using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of dia 0.56mm (zero point five six millimeters) for doors, windows and clerestory windows including bright finished black enamelled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing M.S. plain grills of required patterns in wooden/steel frames of window etc. with M.S. flat, square or round bars bolts and nuts or screws including welding with frame complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing 40x3mm (forty into three millimetre) flat iron hold fast 40cm (Forty centimetre) long including fixing to frame with 10mm (Ten millimetre) diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (Thirty into ten into fifteen millimetre) 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. 300x16mm (three hundred into sixteen millimeters).

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles make of pilot/sheel or equivalent transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) aluminium handles make of pilot/sheel or equivalent transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing aluminum tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. (a) 200x10mm (two hundred into ten millimeters).

Providing and fixing aluminum tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. (a) 100x10mm (one hundred into ten millimeters).

Providing and fixing angle iron cup board frame manufactured from M.S. angle iron 25x25x5mm (twenty five into twenty five into five millimeters) thickness including hinges, jamb, lock jamb, beed and if required angle thrashold of mild steel angles 25x25mm (twenty five into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) each with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surfaces complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five millimeters) special quality bright finished brass cup board locks or wardrobe locks of approved make (Harrison or equivalent make) with six levers including necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) bright finished brass floor door stoppers with rubber cushion and necessary screws etcetera to suit shutter thickness complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture (Narolac/Asian or equivalent paints) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Applying Birla White wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper, primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Stone filling dry hand packed tightly, under floors, complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing antiscid vitrified tiles 600x600x10mm (six hundred into six hundred into ten millimeter) double charged/ultra charged vitrified tiles of Restile/ Nitco/Simpolo /Kajaria/ Somany/Johnson/Orient & Bell / AGL of approved shade in flooring, treads of steps and landing etecetra laid over a bed of 12mm (Tweleve millimeter) thick cement mortar 1:3 (one cement isto three sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as per specifiactions, approved drawing, design up to all floor level and as per direction and entire satisfaction of the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

RAJAT KAJAL GOVT CONTRACTOR

Ankush Dogra

Akash Sood