Repair to leakage/seepage, joinery, flooring, ceiling, sanitary fitting, plastering, painting, approach path, drain and internal electrification of OTM around SP Road/ Beacher Road under AGE B/R-I of GE Dehradun.

Amount

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of existing old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete.

All as per itme No 1.00 here in above but except brick complete. Note : Old serviceable brick obtained from demolition shall be reused. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.

M&L brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including demolition of existing brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. complete.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair complete.(Note: Rendering should be carried out in two layers i.e. Ist layer 10-12mm and 2nd layer 3-5mm).

M & L 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair including taking down existing cement plaster including racking out joints,hacking for key, scrubbing down with water etc. complete.(Note: Rendering should be carried out in two layers i.e. Ist layer 10-12mm and 2nd layer 3-5mm).

M & L 15 mm thick rendering on brick work or concrete surface of wall, chajja, facia, edges of roof slab upto double story of the bldg in cement mortar 1:4 mixed (if ordered) with water proofing compound, surface finished even and smooth including taking down existing cement plaster including racking out joints,hacking for key, scrubbing down with water etc.complete. (Note : Water proofing compound shall be measured and paid separately as supply only).

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed(if ordered) with water proofing compound, surface finished even and smooth complete. (Note : Water proofing compound shall be measured and paid separately as supply only and Rendering should be carried out in two layers i.e. Ist layer 10-12mm and 2nd layer 3-5mm).

M&L for preparation of wall and applying exterior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.(Make : Berger/Asian/JK/Birla

M&L for preparation of wall and applying interior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.(Make : Berger/Asian/JK/Birla

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with coir wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L preparation of old decorated surfaces of ceiling (Plastered) by brooming down or sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.

M&L one coat of oil bound distemper in any tint on already prepared surfaces of walls complete all as specified in SSR Part I and directed by Engr-in-Charge (Note : OBD to be applied from company approved applicator)

M&L two coats oil bound distemper any tint on already prepared surfaces of walls over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge. (Note : OBD to be applied from company approved applicator)

M&L two coat of cement base paint on already prepared surfaces of walls over a coat of primer complete all as specified and directed Engr-in-Charge.

M&L one coat of cement base paint on already prepared surfaces of walls complete all as specified and directed by Egnr-in-Charge.

M & L preparing, of old decorated surfaces of wall, pillasters, cornices, AC sheet etc. by washing, rubbing down & scrapping with steel wire brass, emrypaper, steel plate etc and applying one coat of exterior emulsion paint complete. Make : Asian Paints (Apex Ultima), Berger (all guard), Nerolac.

M & L for one coat of white wash on already prepared surfaces of walls complete all as specified and directed by Egnr-in-Charge.

M & L for one coat of white wash on already prepared surfaces of ceiling complete all as specified and directed by Egnr-in-Charge.

M & L 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling, surface finished fair and even and applying two coats of white wash including taking down existing cement plaster complete.

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

Description same as per item No 22 above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete.

M&L glazed ceramic colour tiles size 300 mm x 600 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

All as per itme No 25.00 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete.

M & L PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds mitered or stopped ends etc. complete.

M&L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete.

M&L 18 to 20 mm thick machine cut polished granite "black or coloured" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed

M&L grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

Ditto as above but on kota stone flooring, udaipur green slab flooring, etc complete all as specified.

M&L heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20to22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 20 mm thick screed bed in cement mortar 1:6 complete.Make NTC/Crystal/Tulip.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete.

Taking down shutter of any description, n. exc. 1 Sqm each complete.

All as per itme No 41.00 here in above but exc. 1 Sqm but n. exc. 2 Sqm each complete.

Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete.

All as per itme No 43.00 here in above but exc. 1.5 Sqm but not exceeding 4 Sqm each complete.

S & F mild steel work as in holdfast, hooks for hanging fans and similar small articles conforming to Fe- 290 Gde-E-165 including necessary welding or fixing nuts and bolts complete.

S & F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete.

S & F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete.

S & F 30 mm thick second class hardwood glazed and Skelton factory made window/ventilator shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass / gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24(b) and as directed

All as per itme No 49.00 here in above but 30 mm thick without shash bar for window/ventilator shutter all as specified in SSR Part-I clause 8.24 b.

S&F factory made solid fibre reinforcement plastic (FRP) frame of size 75mm x 50 mm the rasin of chemical used in door of unsaturated polyester rasin category, catalyst used of methyl Ethyl Ketone peroxide (MEKP)/benzyl peroxide/acetyl aceto peroxide. Accelerator used of cobalt napthalate/cobalt octonate/N/N Dinethyl aniline. Timber suitable for manufacturing of FRP products as in accordance with IS 12896. The timber used for frames is seasoned upto the permissible moisture content as per IS-287 : 1993. Pgiment compatible with unsaturated polyester resin is used to obtain the shade of finish complete all as specified and directed by the Engineer-in-charge

S&F factory made solid panel fibre reinforcement plastic (FRP) door shutter 30 mm thick consisting of frame top & bottom rails as per SSR Part I, any number of panels, the rasin of chemical used in door of unsaturated polyester rasin category, catalylst used of methyl Ethyl Ketone peroxide (MEKP)/benzyl peroxide/acetyl aceto peroxide. Accelerator used of cobalt napthalate/cobalt octonate/N.N Dinethyl aniline Timber suitable for manufacturing of FRP products is in accordance with IS12896. The timber used for frames is seasoned upto the permissible moisture content as per IS-287:1993. Pigment compatible with unsaturated polyester rasin is ued to obtain the shade of finish complete all as specified and directed by the Engr-in-Charge.

S&F factory made 100 % solid wood plastic composite (WPC) door frame 125 x 63 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed by Engineer-in-Charge Make : ECHON/Kumar Tech/Sintex

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified. Make : ECHON/Kumar Tech/Sintex

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including dismantling old section either hooks and hinges or steel hanging door complete

S&F mild steel, plain, black sheet 0.80 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete including dismantling old steel window.

S & F factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded including dismantling old steel window complete.

S & F factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded including dismantling old steel window complete .

S & F factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete

S&F galvanised stainless steel wire with 8% nickel cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete .

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete .

S&F in repair galvanised stainless steel wire with 8% nickel 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete.

S&F in repairs 18mm thick one side prelaminated colour PVC sheet for cup board shutter and frame & fixed at site complete.

S&F in repairs 18mm thick plain white PVC sheet for cup board self, partition etc complete all as specified

S&F magnetic catcher and striking plate including letting in and fixed complete.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F stainless steel barrel tower bolts 150 mm long one piece and fixed complete

S & F stainless steel barrel tower bolts 200 mm long one piece and fixed complete

S & F stainless steel butt hinges, medium weight 75 mm long one piece and fixed with screws/welded to frame ,complete

S & F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete

S & F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame ,complete

S & F stainless steel handles 120 mm long one piece and fixed with screws/welded to frame ,complete

Hasp and staple 75mm safety type, stainless steel with hinge pin including bolt to hinge plate and fixed with screws

S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete.

S & F 300 mm long mild steel sliding door bolt stove enamelled black, with bright bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of sheet, and fixing bolts and fixed complete.

M & L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete.

S & F in repair 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete.

M & L applying two coats of indigo floor paint on concrete surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

M & L applying two coats of PU paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of PU Paint complete.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old sheet complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet including dismantling of old sheet complete all as specified and as directed..

M&L for 6 mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with 'L' type or J type or cranked hook bolts of old AC sheet including dismantling complete.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O including dismantling old section complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

M & L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete.

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete.

S&F in repair decorative brackets/ decorative finals for curtain rods of wooden finish complete.

Supplying, fixing, jointing and testing galvanised steel water tubing 15mm dia bore medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, including taking up or down existing steel tubing and connection including removal to store complete

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, including taking up or down existing steel tubing and connection including removal to store complete.

Fixing only old steel water tubing 15 mm dia bore & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including taking up or down existing steel tubing and connection including cleaning for re-fixing complete.

Fixing only old steel water tubing 20 mm dia bore & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including taking up or down existing steel tubing and connection including cleaning for re-fixing complete.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete.

Supply & Fix in repairs PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends complete.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete. Make : Jaquar/supreme/Hindware.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete. Make : Jaquar/supreme/Hindware.

S & F in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete. Make : Hindware/Parryware/Jaquar.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.. Make : Hindware/Parryware/Jaquar.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. Make :Hindware/Parryware/Jaquar.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete. Hindware/Parryware/Jaquar.

S & F in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete

S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete

S & F in repair 75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete

S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete

S & F in repair 150 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete

S & F in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete

S & F in repair 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete

S&F in repairs heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tank complete all as specified and directed by the Engr-in-Charge.

S & F in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete. Make : Hindware/Parryware/Jaquar (FLS-WHT-5701).

S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete. Make : Hindware/Parryware/Jaquar (CNS-WHT-301).

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaguar/Cat part No. KUP-35001PM/Hindware Cat Part No:F370001/Parryware Cat Pat No.T4302A2

S&F in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower provn with connecting legs &flanges complete all as specified and directed. Make : Jaquar Model No CON 281KN, HSH 1929 & OHS 1989/Marc ES547A & ES 531 (Telehone shower) ES 549 (shower) ES 536 (Shower).

S&F in repair 15mm dia brass chromium plated centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make : Jaguar CAT Part No SOL-6001B/Hindware CAT Part No F450009/Parryware CAT Part No G0665A1

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : - JAGUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Prayag Cat No 9410

S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Prayag CAT Part No S9906

S & F in repair 15 mm bore two way bib taps, chromium plated cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule, complete. Make : Parryware Cat Part No. G0334A1

S & F in repair 15 mm bore two way Angle cock, chromium plated cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule, complete. Make : Parryware Cat No.G4643A1.

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete. Make : Jaquar Cat No.ALE-ESS-585/Parryware Cat No. T9941A1.

S&F in repair soap dish, brass, chromium plated,100X100X60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Make : Jaquar Cat No CAN-1131N.

S&F sheet glass shelf assembly consisting of 5.5mm thicksheet glassshelf with chromium plated guard and railing size 500X125mm (with brass bracket complete. Make : Jaquar Cat No.AKP-35771P.

S&F plate rack 200mm and size 90 x 75 cm made out off 1.00 mm thick stainless steel complete all as specified and as directed.SS Grade 304.

S & F in repair PTMTgrating square 150 mm size complete all as specified. Make : Prayag Cat No. 115

S&F in repair Stainless steel cockroach Trap square of size (101X101 mm) Make : Prayag Cat No. FT 21

S&F in repair Stainless steel cockroach Trap square of size (101X101 mm) Make : Prayag Cat No. FT 23

S&F in repair looking mirror mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified . Make : Prayag

S & F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed. Make: Jaquar Cat Part No AKP-35781PS/CAN-1181FHS

S&F in repairs brass chromium plated towel ring complete all as specified. Make : Jaquar Cat No.AQN-7721.

. S&F in repairs chromium plated Toilet paper holder complete. Make : Jaquar Cat No.ACN -1151N.

M&L cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner

M&L cleaning of water storage tank capacity exceeding 500 litres but not exceeding 1000 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner

S & F rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete

S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete

M & L in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete.

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 15 mm bore size (Minimum weight 142 gms), complete.

S & F 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete.

S&F in repair of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

S&F in repair corner shelf of glass with SS railing complete all as specified.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of

All as per item No 143.00 (Contd/--) ...1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

S&F powder coated aluminium anodised door with frame with u channel, shutter, following accessories and glazing with 4.8 mm thick retro reflected glass, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary, section of aluminium door shall be of following sizes: - Frame: 100x44x1.20 mm thick with rawl plug ,Middle lock rail: 85x44x1.20 mm thick, Bottom rail : 150x44x1.20mm thick, Top rail : 85x44x1.20 mm thick, style : 75x44x1.20 mm thick, glazing bead : 0.70 mm thick, Aluminium handle 'D' type : 150 mm, Aluminium tower bolt 9.9 mm dia shoot 200 mm long, Mortice lock: 100 mm 4 lever, Aluminium stopper cleat, aluminium hinges 100 mm long. Note: PCC shall be measured and paid seperately and making good of wall surface with matching to existing surface including taking down existing door with frame complete all as specified and directed.

S&F powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing with 4.8 mm thick glass, glass fixed with rubber gaskit with alu glazing clips section of alu door shall be of following sizesips, iron mongary, section of aluminium partition shall be of following sizes: Frame size of verticle section: 100x44x1.20 mm thick with rawl plug and horizontal section 75x44x1.20 and size of glazing panel should not be grater than 1100mmx450mm and soild panel should not be grater than 1100mmx1100mm including taking down existing partition with frame complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 851 mm to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.

S&F in repair Brass Mortice lock, four levers vertical type, size 100 mm size

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

Supply, fixing, laying & testing 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors alongwith diverrter complete all as specified and directed.

S&F in repairs CP bathing spout with wall flange 15 mm bore fancy type cromium plated scrwed down, screwed for iron pipe or for brasss ferrule fixed complete all as specified and directed. Make : - Jaquar SPJ-15429PM/SPJ-10429PM or equivalent kohler.

S&F in repairs concealed body for joystic diverter 40 mm cartridge with button assembly (button on top) but without exposed part. Make : - Jaquar ARC-87065C or equivalent Kohler and single liver exposed part kit of diverter consisting of operating liver wall flange (with seal and button only) Make : - Jaquar OPP 15065KPM or equivalent Kohler PGD 10879 IN.

S&F in repairs bottle trap of chromium plated (half of full threaded) complete all as specified and directed by Engr-in-Charge. Make : - Hindware CAT partNo F850004/Prayag Cat Part No BEF-21/12"/ALD-769L250x190

M&L applying silicon based water proofing paint spray on external surfaces of walls including taking down loose plaster, filling of crack and plaster surfaces with cement mortar 1:4 complete all as specified & directed. Make : Dr. Fixit, Pedilite

M & L rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement . WPC will be measured and paid separately.

M & L rendering 10mm thick in patches n exc 3 Sqm in cement mortar 1:3 mixed with water proofing compound of cement finished fair faces of concrete surfaces, chajja/ facia even and fair without using extra cement . WPC will be measured and paid separately.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in appoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding)

Removing of bushes upto root level from the wall upto tripple storey builing and repairing of disturbed surface with appoxy mortar with plaster and making good with existing surface with coloured photograph of before and after.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds, chajjas and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc.

Taking down existing projected type hings from the steel window carefully with disturbing frame and fix 50 mm long mild steel box type hinge weld to steel frame and shutter with welding and making good including touch with paint and with existing surfaces including scaffolding all as directed by Engr-in-charge.

S&F 18 mm thick plywood coated with fibre reinforced plastic (FRP) 3mm laminated on both faces (3mm +12mm+3mm) and edges to be sealed with PVC edges binding tape for cubboard shelf and shutter including taking down cup board with frame complete as per specifications and as directed by the Engineer - in - charge.Make:-Jayna, Brown crust, PLUSCH

S&F Factory made solid Fibre reinforcement plastic (FRP) frame of size 50mmx20mm the rasin of chemical used in door of unsaturated polyester rasin catagory, cataylst used of methyl Ethyl Ketone peroxide (MEKP)/benzyl peroxide/acetyl aceto peroxide. Accelerator used of cobalt napthalate/cobalt octonate/N.N Dinethyl aniline. Timber suitable for manufacturing of FRP products is in accordance with IS 12896. The timber used for frames is seasoned upto the permissible moisture content as per IS-287 : 1993. Pigment compatible with unsaturated polyester resin is used to obtain the shade of finish complete all as specified and directed by the Engineer-in-Charge.

S&F of self-adhesive bituminous sealing tape100 mm width with1 side adhesive, rubber modified, consists of an aluminim foil reinforced by a polyester film and coated with a cold adesive bituminious compound for sealing of cracks and joints as in roof complete all as specified. Make: Sika, Durastrip

Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. Note:-(cost of the borrow pit shall be deemed to be included in the quoted rates of this item).

M&L for cleaning of septic tank of capacity upto 50 users by de-sludging, distilling and getting out all silt, sludge, organic and inorganic materials by manually/mechanically and removing the sludge to a distance exc 400mtr but not exc 500mtr away from site and burying it into the pits and covered with earth. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

All as per itme No 168.00 here in above but septic tank exceeding 50 users but not exceeding 150 users -ditto--

All as per itme No 168.00 here in above but septic tank exceeding 150 users but not exceeding 250 users -ditto--

Dewatering of soakwell or sewage pit of any dia and depth manually or by using pump and removal of sludge if any to a distance exc 1.5 Km but n. Exc.5 Km out side of MOD land complete as directed by Engineer-in-charge.

Excavation in trench in any type of soil not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete.

Demolition and breaking drain pipe (salt glazed stoneware) 150/200 mm Internal dia of pipe set in cement mortar complete.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ 150 mm Internal dia confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 including cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete

Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ 120 mm Internal dia confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 including cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete.

M & L RCC1:2:4 type B1 using 20 mm graded stone aggregate as in beam, cantilevers, lintel chajjas etc. Including demolition of existing old RCC complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and as directed.

M & L for RCC (1:1 ½: 3) (using 20 mm graded stone aggregate) as in slabs supported on wall, beam and columns in floors ,roof slabs and in shelves Including demolition of existing old RCC complete all as specified and as directed.

Use and waste form work to side & soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick, rough finished surface of concrete complete.

S & F mild steel TMT bar 8 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S & F mild steel TMT bar 6 to 8 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 surface finished even and smooth complete.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, below or above ground level complete.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) complete.

M&L for 25 users RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter all as specified and shown on drawings.

M&L 1.8 M dia X 3.0 M effective depth Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats all as specified and shown on drawings.

M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed. NOTE : Reinforcement shall be Measured and Paid for separately under relevant Item(s).

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting ut,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and as directed by the Engr-in-Charge.

M&L for angle, or tee section etc. as in fencing post conforming to Fe 410 W (gde E-250 quality B).

S/F Mild steel flat iron for securing of chain link fencing conforming to Fe 290 Gde E-165 in post and strut in fencing including fabrication i.e. cutting tops drilling holes notching for wire welding etc..complete all as specified and directed.

Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia or securing with clips quality conforming to round bar bars.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm but not.exc 22.5 cm long,diameter of neck n exc12 mm complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type weight exc 4 Kg per square metre as approved by Engineer-in-Charge.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wireany size or type weight exc 4 Kg per square metre as approved by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S& F steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type , thickness of lath 1.00 mm . complete all as specified and directed.

S& F safety lever locks mild steel with 4 levers for rolling shutters

Dismantling fencing wire mesh, any type

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 including demolition of existing old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete. all as specified and directed

Description same as per Item No.201.00 above but except stone complete. Note : Old serviceable stone obtained from demolition shall be reused. The rate quoted against this item is inclusive of necessary cleaning and stacking of stone before incorporation in the work.

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 complete.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, lamp holders, regulators, sockets, light fitting any type etc complete. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Eng.-in-charge

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified and directed by Engr-in-charge for the following:-

(a) One light /bell / Exhaust fan point controlled by one-one way switch.

(b) One ceiling fan Point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board.

All as per itme No 205.00 here in above but with 2.5 Sqmm. (nominal area) wire/cable for phase and neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable, FRLS 1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

M&L for point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through existing steel/PVC conduit but including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified and directed by Engr-in-charge for the following:-

(a) One light /bell / Exhaust fan point controlled by one-one way switch.

(b) One ceiling fan Point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amps switch socket out let on the independent board complete.

All as per itme No 207.00 here in above but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

M&L for Point wiring with 1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including 1.5 Sqmm (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting cheses for conduits and sinking's for GI metal boxes and making good to walls, floors etc complete all as specified and directed by Engr.-in-charge of following. (Note : (i) Flush metal GI boxes shall be measured and paid separetly. (ii) Colour code shall be maintained as per IE rule.

(a) One light /bell / Exhaust fan point controlled by one-one way switch.

(b) One ceiling fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board.

All as per itme No 209.00 here in above but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

S&F moduler switch piano flush, button type 6 Amp SP one module one way complete all as specified Make : Legrand model Lyncus 6772.00 eqvt in L&T model entice/ Havells model Murano.

S&F moduler switch piano flush button type 16 Amps SP one module one way complete all as specified Make : Legrand model Lyncus Cat No 6772.09 eqvt in L&T model entice/ Havells model Murano.

S&F moduler socket outlet multipurpose 5 Pin 6 Amp two module complete all as specified & directed. Make : Legrand model Lyncus Cat No 6772.28 eqvt in L&T model entice/ Havells model Murano.

S&F moduler socket outlet two in one three pin 6 Amp and 16 Amp two module flush type complete al as specified.Make : Legrand model Lyncus Cat No 6772.30 eqvt in L&T model entice/ Havells model Murano.

S&F moduler bell push 6 Amp one module one way complete all as specified. : Make : Legrand model Lyncus Cat No 6772.20 eqvt in L&T model entice/ Havells model Murano.

S&F 4 step modular electronic fan regulator step type 2 module 120 watts 360 degree.Make : Legrand model Lyncus model 6772 41 eqvt in L&T model entice/ Havells model Murano.

S&F in replacement of rusted GI sunken box with flush metal GI box 1/2 module suitable for modular switches incl plastering, making good disturbed surfaces of wall, painting as per existing to match the wall complete all as directed.

All as per itme No 217.00 here in above but 3 module.

All as per itme No 217.00 here in above but 4 module.

All as per itme No 217.00 here in above but 6 module.

All as per itme No 217.00 here in above but 8 module.

S&F combind cover plate white 1 module suitable for modular switches. Make : Legrand model Britzy Cat No 6734 91 eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 2 module suitable for modular switches. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 3 module suitable for modular switch/socket. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 4 module suitable for modular switch/socket. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 6 module suitable for modular switch/socket. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 8 module suitable for modular switch/socket. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F switch piano flush, button type 5 Amp SP 250 Volt AC complete all as specified & directed.

S&F switch piano flush button type 15 Amps SP 250 Volt AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet 2-in1,3 pin 5 and 15 Amp flush type 250V AC complete all as specified & directed.

S&F Bell push flush, button type 5 Amp SP 250 Volt AC complete all as specified & directed.

S&F Bell Ding dong 250V AC complete all as specified & directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete .

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC.

S&F lamp holder PVC/polycarbonate type with LED lamp 9/10 watt complete all as specified & directed.

S&F in rplacement, wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 4000K/6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make:Wipro Cat part No LL20-281-XXX-65AL1/ Philips cat part No BN021C LED20S PSU CWGR S2/Havells Cat No ENDURA LINEARNEOBS20W LED865SPCWH.

S&F in rplacement, Decorative Square/Round surface mounted LED flat panel PDC aluminium housing and PMPA diffuser makes it a robust Luminaire 12 Watts PF 0.9 and above operating voltage 150V-300V colour temp 4000K & lumen input output 70 Lumen per watt incl provisioning of 3 core white flexible multistranded copper conductor 23/0.0076 from ceiling rose to light connector complete all as specified and directed by Engineer-in-charge Make : Crompton cat part No LCDN-12-CDL/TL/WW/Wipro cat No LD80-101-XXX-60-XX/Philips Cat No DN092B LED10S-3000-PSU-WH

S&F in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 15 Watts LED Lamp incl one LED New Odore 10W E27 WW Ball Lamp Lumen output 835 (lm) 3000K complete all as specified and directed by Engineer-in-charge Make : Havells (City-1) cat part No LHDL02160099 (Fitting) LHLDERHEMD8X010(Lamp) or eqvt in Wipro / Philips / Mepro.

S&F in replacement of energy saving Bulk head luminaire with opal diffuser with and including retrofit LED lamp 10 watts complete all as specified and directed by Engr-in-charge. Make : Havells/PhilipsWipro

S&F in rplacement, mirror light decorative compact luminarious with decorative ends caps 9 Watt or higher LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Havells Cat No E-Lite Pride LHEXBLP7IN1W009 or eqvt in Philips/Wipro

S&F in rplacement, New generation energy saving and environmental friendly long life LED Street light luminaire Endura Pearl Neo made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 with separate surge protection 5KA, 40 Watts or near higher size with making all arrangement for fixing light fitting such as replacement of GI pipe bracket made of 40 mm bore medium grade pipe made to shape of 1200 of 70 cm and 50 cm to a overall length of 1.2 mtr for fixing of street light fitting including MS clamps of size 32 x 3 mm flat iron, nuts, bolts and washers of required size painting complete with all necessary electric connection etc all as specified and directed incl taking down the existing unserviceable bldg security light fitting complete all as specified and directed Make : Havells cat part No ENDURAPEARLNEOSL40WLED757PASYTOPC/CG Cat No LSTP-45-CDL / Philips Cat No BRP046 LED 36 CW MR S1 PSU GR /Greenstar DSS 40.

S&F in rplacement, TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement for DPX3 MCCB 125 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge incl taking out Unserviceable DBs, MCCB and MCBs of any capacity, Make: Legrand/L&T/ Indo Asian.

S&F in rplacement, sheet metal enclosures 240 volt with suitable rated bus bar for double door 12 way IP-43 DB's mounting flush on wall/concealed and making good distubed surfaces incl taking out Unserviceable DB any capacity. complete all as specified and directed by Engr-in-charge. Make: Legrand/ L&T/ Indo Asian.

S&F in rplacement, sheet metal enclosures 240 volt with suitable rated bus bar for double door 8 way IP-43 DB's mounting flush on wall/concealed and making good distubed surfaces incl taking out Unserviceable DB any capacity. complete all as specified and directed by Engr-in-charge. Make: Legrand/ L&T/ Indo Asian..

S&F in replacement of MCCB 125 Amps four pole 415 volts thermal magnetic release ICU=100% ICS having breaking capacity 16 KA including connection terminal strip complete all as specified & directed Make:Legrand/ L&T/ Indo Asian.

S&F MCB SPN 240 Volt 10 KA 40 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand/L&T/Indo Asian..

S&F MCB single pole 240 volt, 10 KA, 40 Amp, 'C' series confirming to IS complete all as specified and directed. Make: Legrand/L&T/Indo Asian.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

All as per item No 214 herein above but 2 Single core 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit incl one 6 Sq mm copper conductor multistranded green colour as earth wire upto common earth and connected to earth dolly complete.

Supply and laying in replacement of u/s XLPE insulated, armoured, heavy duty electric cable, with multi stranded aluminum conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and overall PVC sheathed 1100 Volts grade, nominal cross sectional area 25 Sqmm 4 core incl lugs thimbles bottle timbles and gun metal cable glands and heat shrinkable PVC sleeves on exposed surfaces and teflon tape duly insulated complete laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/ floors/ equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge. Make : Havells/Polycab/KEI/Grandlay

Excavation in trenches not exceeding 1.5m and not exceeding 1.5m in depth for laying of electric cable and getting out in soft/loose soil, complete all as specified and as directed by the Engr-in-Charge.

M&L for sand cushioning in trenches for protection of UG cable with river bed sand laid dry in trenches before and after laying of cable, including well ramming and consolidation complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Supply and laying in replacement of GI Steel tubing medium grade 50 mm (2") dia including all fitting laying in trenches or grouting/fixing in wall for protection of cable complete all as specified and directed by Engineer-in-charge

M&L for replacement of unserviceable Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm. dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected

All as per item No 256.00 (Contd/--)...by galvanized iron pipe medium 15 mm. bore, and water pipe 20 mm. bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 and testing on completion. Note: (i) If the earth resistance is not found within permissible limit complete earthing shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

S&F in replacement tamper proof electronic single phase whole currrent energy meter (LCD display) 10 Amp to 60 Amp, 240 volt class 1.00 and AC supply including cable connection, proper sealing with barcode with PVC seal. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications of line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type transparent meter box . The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old unserviceable meter will be deposited to E/M store yard)

S&F in rplacement, Meter Distribution Borard made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shallbe embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04 Nos incuding electrical connection with excisting system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed. Make Hensel cat part no Mi0800 / Secure/Sintex

Supply only fan capacitor 2.5 mfd complete all as specified and directed make universal / Havells/Epcos .

Supply only fan capacitor 4 mfd complete all as specified and directed make universal / Havells/Epcos

S&F ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using GI of suitable size as directed and with heavy duty rubber insulator and two Nos nuts and one bolts including split pin complete all as directed.

Supply and fixing of louvers shutters round or square made out of GI sheet suitable upto 300 mm dia exhaust fan complete incl taking out old u/s complete

M/S JAI PRAKASH GOEL

M/S C S AITHANI