OUT SOURCING OF SERVICES FOR OPERATION AND MAINTENANCE OF ELECTRIC SUPPLY LIFT AT CABS AND EXTERNAL ELECTRIC SUPPLY AT STIR AND CABS UNDER GE I RD EAST BANGALORE

Amount

Outsourcing of services for maintenance and operation of MES sub station at CABS HT11 KV/415 volts for 3 shifts each of 8 hrs duration including operation of HT/LT switch gear, capacitor bank and maintaining the log sheets round the clock including Sunday & Holidays. First shift – 0600 hrs to 1400 hrs (Electrician -1, Helper-1) Second shift – 1400 hrs to 2200 hrs (Electrician -1, Helper-1) Third shift – 2200 hrs to 0600 hrs (Electrician -1, Helper-1) Items to be maintained and operated are as under :- (i) Transformer out door type – 400 KVA -1 No. (ii) Transformer out door type –1000 KVA -2 No (iii) Two pole structure of KPTCL –1 No (iv) Two pole structure with GOS DOL fuses etc., (v) Feeder pillar box (vi) HT/ LT panel board of following (a) VCB panel – 3 Nos ( HT Panel) (b) ACB panel- 01 No (LT Panel) (c) Capacitor panel –02 Nos (LT panel) (d) MCCB panel – 1 No (LT panel) (vii) Diesel operated Gen set complete control panel/ battery of all capacity

(A) Nature of work involved are as under :- (i) Replacement of HPMV lamps/HPSV lamps any wattage bulbs of any type chokes, starters, capacitors ignitor and ballasts (ii) Daily checking of oil levelling the transformer and topping up of oil if required and observing any leakage in the transformer and checking of TF oil for the required board. (iii) Replacement of DOL fuses (iv) Periodical examination of feeder pillar boxes and LT panel board for any loose connections and tightening the same if required. (v) Attending faults in all perimeter lights and building, security lights by replacing lamp chokes or any other connecting components. (vi) Maintaining the following documents (a) Log sheets and complaints slips. (b) Register for earthing test results. (c) Register for IR Test results. (vii) Inspecting and testing the earth pits 40 Nos for proper earth resistance not exc 2 ohms and improving by pouring water if found less than test results should be recorded and signed by both the parties. (viii) day to day maintence of complaint at CABS all as directed by Engineer-in-Charge , but essential for smooth functioning of the delete installations.

(ix) attending day to day complaints, 11KV break down including checking of fuse, internal electrification in which maintenance of all internal power sockets, UPS sockets & bus ducts LT panel, UPS panels DB's in each floor, all light fittings, security lights, Hanger light, complete wiring in all buildings in CABS including all hangers, AEW&C, MES building, security blds, MT, pump house, sub station and AC plant including maintenance of perimeters lightings, area lighting, flood lighting, Attending faults in 5/15 amps sockets single phase and three phase power points distribution boards, feeder pillar boxes, control panels of all type etc., including internal wiring of buildings ceiling fans, exhaust fan complete.

Outsourcing of services for maintenance and operation of MES sub station at STIR HT11 KV/415 volts for oneshifts each of 8 hrs duration including operation of HT/LT switch gear, capacitor bank and maintaining the log sheets round the clock including Sunday & Holidays. First shift – 0600 hrs to 1400 hrs (Electrician -1, Helper-1) Second shift – 1400 hrs to 2200 hrs (Electrician -1, Helper-1) Third shift - 2200 hrs to 0600hrs (Electrician -1, Helper-1) Items to be maintained and operated are as under :- (i) Transformer out door type – 1000 KVA - 2 No. (ii) Transformer out door type –1000 KVA - 2 No (iii) Two pole structure of KPTCL –1 No (iv) Two pole structure with GOS DOL fuses etc., (v) Feeder pillar box (vi) HT/ LT panel board of following (a) VCB panel – 3 Nos ( HT Panel) (b) ACB panel- 01 No (LT Panel) (c) Capacitor panel –02 Nos (LT panel) (d) MCCB panel – 1 No (LT panel) (vii) Diesel operated Gen set complete control panel & battery

(A) Nature of work involved are as under :- (i) Replacement of HPMV lamps/HPSV lamps any wattage bulbs of any type chokes, starters, capacitors ignitor and ballasts (ii) Daily checking of oil levelling the transformer and topping up of oil if required and observing any leakage in the transformer and checking of TF oil for the required board. (iii) Replacement of DOL fuses (iv) Periodical examination of feeder pillar boxes and LT panel board for any loose connections and tightening the same if required. (v) Attending faults in all perimeter lights and building, security lights by replacing lamp chokes or any other connecting components. (vi) Maintaining the following documents (a) Log sheets and complaints slips. (b) Register for earthing test results. (c) Register for IR Test results. (vii) Inspecting and testing the earth pits 40 Nos for proper earth resistance not exc 2 ohms and improving by pouring water if found less than test results should be recorded and signed by both the parties. (viii )Any other unforeseen job required and as directed by Engineer-in-Charge , but essential for smooth functioning of the installations..

(ix) attending day to day complaints, 11KV break down including checking of fuse, internal electrification in which maintenance of all internal power sockets, UPS sockets & bus ducts LT panel, UPS panels DB's in each floor, all light fittings, security lights, Hanger light, complete wiring in all buildings in CABS & STIR including all hangers, AEW&C building, security office, MT, pump house, sub station and AC plant including maintenance of perimeters lightings, area lighting, flood lighting, Attending faults in 5/15 amps sockets single phase and three phase power points distribution boards, feeder pillar boxes, control panels of all type etc., including internal wiring of buildings ceiling fans, exhaust fan complete.

Outsourcing of services for maintenance and operation for passenger cum goods lift of capacity one Metric ton electrically driven catering for 4 floor including ground floor installed at CABS General Shift 0800 hrs to 1700 hrs (01 Lift Operator for shift)

Note for Item Ser No. 1 to 3 (i) Necessary two Nos uniform duly marked as Category of workers and mobile facility shall be provided to all operators . The rate shall be deemed to include for the same. (ii) Contractor will provide ITI certificate for tradesmen or minimum experience of 4 years from reputed organization (iii) PF, ESI of all tradesmen/helper is required & payment should be given through Bank account only (iv) If contractor fails to provide the tradesmen /helper the recovery should be @1500 per shift (v) Contractor will provide all the required Documents , Register, Tools, uniform, First Aid Box etc. at the duty places

(vi) Contractor shall arrange to attend emergency and break down calls and the system should be brought back to workable condition with minimum possible time as assessed by the Engineer-in-Chrage. The rate quoted by the contrator shall deemed to be included the provision also. (vii) Contractor shall submit the periodical service report, break down repairs and spares replaced by the service men in the format as approved by the Accepting Officer. This report shall be submitted to GE along with payment claims by the contractor. (viii) The labour charges for servicing and replacement of minor spares shall be deemed to be included in the rate quoted by the contractor. (ix) The contractor should maintain the AC plant and BMS system room and AHU rooms for inspection as and when asked by Engineer-in-Charge (x) Contractor should maintain data sheet /log sheet separately for AC Plant & inside design temperature / and humidity floor wise should be recorded . (xi) All the registers /charts required for inspection should be maintained by the contractor and display as and when directed by Engineer-in-Charge for inspection.

M & L for submain wiring of 2 run 6 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC casing capping /conduit accessories concealed in wall/roof including one run of 6Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge.Make: Finolex/Havells/Gloster,

Supply & fix SPN enclosure with a two pin and earth plug ,socket complete with one single pole MCB. Make : Havells/ Legrand/Schneider

Excavation in trenches not exc 1.5 mtr deep and not exc 1.5 mtr wide in hard/ loose / soft soil and getting out of cable/sand/ bricks for reuse, For Rerouting of existing cables of different size used with old retrived sand & bricks from existing cables for reuse ,incuding return of excavated earth all as directed by Engineer - In - Charge

Supply and fixing new MCCB enclouser for 800 Amps TP/FP on wall/panel including lugs for connecting cable up to 300 sqmm with all ground support of Angle required size for grounting of two nos Enclouser fittings & fixtures required at site for excutation of enclouser etc all as directed.Make : Indo Asain/ Havells/legrand

Supply and fix MCCB Thermal release adjustable over load setting ; 0.8-1.0 x In 4 pole ,36 kA AC 415V, conforms to IS/IEC; 60947-2 ,lcs=100 % lcu complete all as directed by Engineer-in -charge of following capacity . Make : L&T/legrand/Havells

(a) 250 Amps 36 KA 4 Pole conforms to IS/IEC; 60947-2

(b) 200 Amps 36 KA 4 Pole conforms to IS/IEC; 60947-2

Supply and fix MCCB Microprocessor release 3 pole 800 A,50 kA AC 415V, conforms to IS/IEC; 60947-2 ,lcs=100 % lcu complete all as directed by Engineer-in -charge. Make : L&T/legrand/Havells

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core including lugs/ferrouls all as directed & specified by Engineer - in Charge Make :- Finolex/Havells/Gloster,

Excavation in trenches not exc 1.5 mtr deep and not exc 1.5 mtr wide in hard/ loose / soft soil and getting out. For laying of cables

Returning and filling in, levelling watering and well ramming in layers not exc 25 cms thick all as directed

Removal of surplus soil to a distance not exc 50 mtr and depositing where as directed.

M/L for sand filling in trenches above and below the cable for protection

M/L old size country made Bricks in trenches above the cable for protection

supply and laying pipe light grade for cable proctection of LT cable iin trench/floor/ post, as specified and directed by Engineer - in - Charge, Make :- Tata/Zenith/Jindal

(a) 80 mm dia

Earthing complete with galvanised iron earth plate electrode 600x600x6 MM as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth strip of 32x6 mm, by means of bolts & nuts,to GI and connected to earthing test point all as shown in elecrical plate No-3 of SSR part -1 of 2009 specified or indicated and testing on completion including excavation /earth work in any type of starta PCC (1:3:6) type C1 earthing chamder pre cast slab 50 mm thick in cement concrete (1 : 2 : 4 ) type B1 , Reinforced with welded steel wire fabric (XPM) weight not less than 4 KG /sqm cast iron frame ,funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including GI strip 32x6 mm strip as earthing lead.7.5 meter long etc complete all as specified.

Supply & fix led surge proction device capacity 5KV/ 75 W for street light fittings all as specified & directed Cat SRPS-5K-440 Make :-Crompton/philips/Havells

Supply & fix led out door drivers of capacity 100W for street light fittings all as specified & directed Cat No X100CO70V143FNY1BO Make :-Crompton/philips/Havells

Supply and fix Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver of 21 watts capacity including necessary fitting accessories to fit in balcony in Stir Complex and pre wired complete all as directed by Engineer-in -charge. Make : Cat No - Havels - LS21WLED857S/ LS21WLED840S/ Philips/ CG,

Supply & Fix street light pole boxes of size 6x8x3.5inches for MCB Sliding cover boxes,weather dust rain guarded cable entre and exit arrangement of suitable size of housing of with 01 No MCB SP 6/10 Amps Including Bolts & nuts Clamps for fixing to pole, painting a coat of synthetic enamel paint including termination of cable of size 16 to 35 sqmm 2 Way 4 connectors Each in each boxes all as directed by Engineer - in - charge ( Sintex, Hensel)

Sahara Engineers

C R R CONSTRUCTIONS

Sai Ram Builders

Lucky Enterprises